arXiv subjects

Edoardo Ragusa

Publications and source records attributed to Edoardo Ragusa.

15 recordsLinked to original sources

arXiv2026

Lightweight Neural Networks for Affordance Segmentation: Enhancement of the Decoder Module

The deployment of deep neural networks for visual affordance segmentation on wearable robots poses may prove critical, due to some conflicting aspects of the problem. On one hand, affordance segmentation requires high-level abstraction capabilities, that typically involve large-size models. On the other hand, computing resources hosted on wearable robots prevent to run large-size models in real-time. The paper presents an analysis of the role of the segmentation head in the trade-off between generalization performance and compute cost. The obtained models outperform modern baseline solutions in well-known, real-world datasets while meeting low computing requirements.

cs.CV↗

arXiv2026

Filling the Pareto-Optimal Front for Affordance Segmentation on Embedded Devices Using RGB-D Cameras

While depth sensors have the potential to complement RGB data for affordance segmentation in wearable robots, their usage seems to remain underexplored. The paper proposes two approaches: a reformulated version of hardware-aware neural architecture search, endowed with a newly designed search space to integrate depth (D) information into small-sized deep networks, and a dedicated fine-tuning approach, including a preprocessing layer to merge depth information with RGB data and make it compatible with conventional architectures. In both cases, those methods aim to generate solutions that benefit from modern (portable) hardware accelerators and overcome existing tiny-like approaches, which often fail to tackle critical scenarios due to the severe constraints set by the supporting hardware. Extensive experiments on a pair of real-world datasets demonstrate the effectiveness of the proposed method as compared with existing solutions. The approach presented in the paper generates, in most cases, solutions that identify the Pareto optimal front to balance generalization performance and hardware requirements. The paper also describes the supporting prototype, including a Jetson Nano board and a RealSense RGB-D camera. When considering the energy profile of the device, the overall system can attain real-time performances within an energy budget that is compatible with standard batteries, such as those used in smartphones.

cs.CV↗

arXiv2026

BearingNAS: Obtaining In-Sensor Intelligent Fault Diagnosis Systems for Bearings Using a Laptop

This paper introduces BearingNAS, a Hardware-Aware Neural Architecture Search (HW-NAS) framework designed to shift the intelligence directly onto the sensor die via in-sensor processing. BearingNAS frames the search as a constrained optimization problem targeting extreme micro-budgets (4 to 8 kiB of RAM and 16 to 32 kiB of Flash). To eliminate the reliance on expensive discrete GPUs, we propose a lightweight, derivative-free search strategy paired with a single data-flow search space that leverages a decaying kernel growth formulation to prevent parameter explosion. We evaluate our framework on the Case Western Reserve University (CWRU) bearing benchmark, optimizing architectures for three STMicroelectronics targets: two commodity microcontrollers and the LSM6DSO16IS Intelligent Sensor Processing Unit (ISPU). Running entirely on a laptop CPU, the search converges in less than an hour. The resulting best in-sensor architecture achieves a highly competitive diagnostic accuracy of 99.50\% on the ISPU. These results demonstrate the viability of shifting the machine learning workload inside the sensor package, enabling low-cost, production-scale bearing fault diagnosis.

cs.LG↗

arXiv2026

Searching Neural Architectures for Sensor Nodes on IoT Gateways

This paper presents an automatic method for the design of Neural Networks (NNs) at the edge, enabling Machine Learning (ML) access even in privacy-sensitive Internet of Things (IoT) applications. The proposed method runs on IoT gateways and designs NNs for connected sensor nodes without sharing the collected data outside the local network, keeping the data in the site of collection. This approach has the potential to enable ML for Healthcare Internet of Things (HIoT) and Industrial Internet of Things (IIoT), designing hardware-friendly and custom NNs at the edge for personalized healthcare and advanced industrial services such as quality control, predictive maintenance, or fault diagnosis. By preventing data from being disclosed to cloud services, this method safeguards sensitive information, including industrial secrets and personal data. The outcomes of a thorough experimental session confirm that -- on the Visual Wake Words dataset -- the proposed approach can achieve state-of-the-art results by exploiting a search procedure that runs in less than 10 hours on the Raspberry Pi Zero 2.

cs.LG↗

arXiv2026

An affordable hardware-aware neural architecture search for deploying convolutional neural networks on ultra-low-power computing platforms

Hardware-aware neural architecture search (HW-NAS) allows the integration of Convolutional Neural Networks (CNNs) in microcontrollers devices by automatically designing neural architectures that can fit prearranged hardware constraints. However, state-of-the-art HW-NAS target high-performance microcontrollers, whose power consumption does not meet sensing nodes requirements. This work presents a HW-NAS generating tiny CNNs that can run on ultra-low-power microcontrollers, featuring a lightweight search procedure enabling its execution even on embedded devices. Empirical results on three well-known benchmarks for tiny computer vision proved that the proposed HW-NAS was able to generate tiny CNNs while preserving state-of-the-art classification accuracy.

cs.LG↗

arXiv2026

Running hardware-aware neural architecture search on embedded devices under 512MB of RAM

This document proposes a novel approach to hardware-aware neural architecture search (HW NAS) that considers the resources available on the computing platform running it, enabling its execution on various embedded devices. The presented HW NAS produces tiny convolutional neural networks (CNNs) targeting low-end microcontroller units (MCUs), typically involved in the Internet of Things (IoT) or wearable robotics, opening new use cases. A gateway could run it to tailor CNNs' architecture on the acquired data without using external servers, ensuring privacy. The proposed technique achieves state-of-the-art results in the human-recognition tasks on the Visual Wake Word dataset, a standard TinyML benchmark, on several embedded devices.

cs.AR↗

arXiv2026

On-Device Neural Architecture Search

This paper proposes a new approach to near-sensor computing, in which a lightweight Neural Architecture Search (NAS) is performed directly on the deployment device to find the best tiny neural architecture for analyzing the real-time data acquired through sensors. This new adaptation capability can be particularly useful in the case of human-machine interfaces for which the neural network analyzing the biometrical data can be re-designed each time the user changes, after a guided data collection procedure, fighting the typical data variations between individuals on a new level. To implement the proposed approach a new NAS has been designed and then validated on the Italian Sign Language dataset (ISL), a collection of surface electromyography (sEMG) signals of the signs of the Italian alphabet, using several embedded systems. Moreover, further validation on the Case Western Reserve University dataset (CWRU), a benchmark for intelligent fault diagnosis, is presented to suggest another possible application of the proposed approach. When run on a Raspberry Pi 4, the proposed NAS performs beyond the state of the art proposing a tiny neural architecture having 0.63 times less RAM occupancy and 5.96 percentage points of more accuracy in the case of the ISL dataset; and 0.44 times less RAM occupancy and 0.2 percentage points of more accuracy in the case of the CWRU dataset.

cs.LG↗

arXiv2026

The data heat island effect: quantifying the impact of AI data centers in a warming world

The strong and continuous increase of AI-based services leads to the steady proliferation of AI data centres worldwide with the unavoidable escalation of their power consumption. It is unknown how this energy demand for computational purposes will impact the surrounding environment. Here, we focus our attention on the heat dissipation of AI hyperscalers. Taking advantage of land surface temperature measurements acquired by remote sensing platforms over the last decades, we are able to obtain a robust assessment of the temperature increase recorded in the areas surrounding AI data centres globally. We estimate that the land surface temperature increases by 2°C on average after the start of operations of an AI data centre, inducing local microclimate zones, which we call the data heat island effect. We assess the impact on the communities, quantifying that more than 340 million people could be affected by this temperature increase. Our results show that the data heat island effect could have a remarkable influence on communities and regional welfare in the future, hence becoming part of the conversation around environmentally sustainable AI worldwide.

cs.CY↗

arXiv2026

Hardware-Aware Neural Architecture Search for Encrypted Traffic Classification on Resource-Constrained Devices

This paper presents a hardware-efficient deep neural network (DNN), optimized through hardware-aware neural architecture search (HW-NAS); the DNN supports the classification of session-level encrypted traffic on resource-constrained Internet of Things (IoT) and edge devices. Thanks to HW-NAS, a 1D convolutional neural network (CNN) is tailored on the ISCX VPN-nonVPN dataset to meet strict memory and computational limits while achieving robust performance. The optimized model attains 96.60% accuracy with just 88.26K parameters, 10.08M FLOPs, and a maximum tensor size of 20.12K. Compared to state-of-the-art models, it achieves reductions of up to 444-fold, 312-fold, and 15-fold in these metrics, respectively, minimizing memory footprint and runtime requirements. The model also achieves up to 99.86% across multiple VPN and traffic classification (TC) tasks; it further generalizes to external benchmarks with up to 99.98% accuracy on USTC-TFC and QUIC NetFlow. In addition, an in-depth study of header-level preprocessing confirms that the optimized model can provide performance across a wide range of configurations, even in scenarios with stricter privacy considerations. Likewise, a reduction in the length of sessions of up to 75% yields significant improvements in efficiency, while maintaining high accuracy with only a negligible drop of 1-2%. However, the importance of careful preprocessing and session length selection in the classification of raw traffic data is still present, as improper settings or aggressive reductions can cause a 7% reduction in accuracy. The quantized architecture was deployed on STM32 microcontrollers and evaluated across input sizes; results confirm that the efficiency gains from shorter sessions translate to practical, low-latency embedded inference. These findings demonstrate the method's practicality for encrypted traffic analysis in constrained IoT networks.

cs.NI↗

arXiv2025

Intrusion Detection on Resource-Constrained IoT Devices with Hardware-Aware ML and DL

This paper proposes a hardware-aware intrusion detection system (IDS) for Internet of Things (IoT) and Industrial IoT (IIoT) networks; it targets scenarios where classification is essential for fast, privacy-preserving, and resource-efficient threat detection. The goal is to optimize both tree-based machine learning (ML) models and compact deep neural networks (DNNs) within strict edge-device constraints. This allows for a fair comparison and reveals trade-offs between model families. We apply constrained grid search for tree-based classifiers and hardware-aware neural architecture search (HW-NAS) for 1D convolutional neural networks (1D-CNNs). Evaluation on the Edge-IIoTset benchmark shows that selected models meet tight flash, RAM, and compute limits: LightGBM achieves 95.3% accuracy using 75 KB flash and 1.2 K operations, while the HW-NAS-optimized CNN reaches 97.2% with 190 KB flash and 840 K floating-point operations (FLOPs). We deploy the full pipeline on a Raspberry Pi 3 B Plus, confirming that tree-based models operate within 30 ms and that CNNs remain suitable when accuracy outweighs latency. These results highlight the practicality of hardware-constrained model design for real-time IDS at the edge.

cs.NI↗

arXiv2025

Adversarial Robustness of Traffic Classification under Resource Constraints: Input Structure Matters

Traffic classification (TC) plays a critical role in cybersecurity, particularly in IoT and embedded contexts, where inspection must often occur locally under tight hardware constraints. We use hardware-aware neural architecture search (HW-NAS) to derive lightweight TC models that are accurate, efficient, and deployable on edge platforms. Two input formats are considered: a flattened byte sequence and a 2D packet-wise time series; we examine how input structure affects adversarial vulnerability when using resource-constrained models. Robustness is assessed against white-box attacks, specifically Fast Gradient Sign Method (FGSM) and Projected Gradient Descent (PGD). On USTC-TFC2016, both HW-NAS models achieve over 99% clean-data accuracy while remaining within 65k parameters and 2M FLOPs. Yet under perturbations of strength 0.1, their robustness diverges: the flat model retains over 85% accuracy, while the time-series variant drops below 35%. Adversarial fine-tuning delivers robust gains, with flat-input accuracy exceeding 96% and the time-series variant recovering over 60 percentage points in robustness, all without compromising efficiency. The results underscore how input structure influences adversarial vulnerability, and show that even compact, resource-efficient models can attain strong robustness, supporting their practical deployment in secure edge-based TC.

cs.NI↗

arXiv2025

Energy-Efficient Deep Learning for Traffic Classification on Microcontrollers

In this paper, we present a practical deep learning (DL) approach for energy-efficient traffic classification (TC) on resource-limited microcontrollers, which are widely used in IoT-based smart systems and communication networks. Our objective is to balance accuracy, computational efficiency, and real-world deployability. To that end, we develop a lightweight 1D-CNN, optimized via hardware-aware neural architecture search (HW-NAS), which achieves 96.59% accuracy on the ISCX VPN-NonVPN dataset with only 88.26K parameters, a 20.12K maximum tensor size, and 10.08M floating-point operations (FLOPs). Moreover, it generalizes across various TC tasks, with accuracies ranging from 94% to 99%. To enable deployment, the model is quantized to INT8, suffering only a marginal 1-2% accuracy drop relative to its Float32 counterpart. We evaluate real-world inference performance on two microcontrollers: the high-performance STM32F746G-DISCO and the cost-sensitive Nucleo-F401RE. The deployed model achieves inference latencies of 31.43ms and 115.40ms, with energy consumption of 7.86 mJ and 29.10 mJ per inference, respectively. These results demonstrate the feasibility of on-device encrypted traffic analysis, paving the way for scalable, low-power IoT security solutions.

cs.NI↗

arXiv2025

Tiny Neural Networks for Session-Level Traffic Classification

This paper presents a system for session-level traffic classification on endpoint devices, developed using a Hardware-aware Neural Architecture Search (HW-NAS) framework. HW-NAS optimizes Convolutional Neural Network (CNN) architectures by integrating hardware constraints, ensuring efficient deployment on resource-constrained devices. Tested on the ISCX VPN-nonVPN dataset, the method achieves 97.06% accuracy while reducing parameters by over 200 times and FLOPs by nearly 4 times compared to leading models. The proposed model requires up to 15.5 times less RAM and 26.4 times fewer FLOPs than the most hardware-demanding models. This system enhances compatibility across network architectures and ensures efficient deployment on diverse hardware, making it suitable for applications like firewall policy enforcement and traffic monitoring.

cs.NI↗

arXiv2023

Affordance segmentation of hand-occluded containers from exocentric images

Visual affordance segmentation identifies the surfaces of an object an agent can interact with. Common challenges for the identification of affordances are the variety of the geometry and physical properties of these surfaces as well as occlusions. In this paper, we focus on occlusions of an object that is hand-held by a person manipulating it. To address this challenge, we propose an affordance segmentation model that uses auxiliary branches to process the object and hand regions separately. The proposed model learns affordance features under hand-occlusion by weighting the feature map through hand and object segmentation. To train the model, we annotated the visual affordances of an existing dataset with mixed-reality images of hand-held containers in third-person (exocentric) images. Experiments on both real and mixed-reality images show that our model achieves better affordance segmentation and generalisation than existing models.

cs.CV↗

arXiv2022

Container Localisation and Mass Estimation with an RGB-D Camera

In the research area of human-robot interactions, the automatic estimation of the mass of a container manipulated by a person leveraging only visual information is a challenging task. The main challenges consist of occlusions, different filling materials and lighting conditions. The mass of an object constitutes key information for the robot to correctly regulate the force required to grasp the container. We propose a single RGB-D camera-based method to locate a manipulated container and estimate its empty mass i.e., independently of the presence of the content. The method first automatically selects a number of candidate containers based on the distance with the fixed frontal view, then averages the mass predictions of a lightweight model to provide the final estimation. Results on the CORSMAL Containers Manipulation dataset show that the proposed method estimates empty container mass obtaining a score of 71.08% under different lighting or filling conditions.

cs.CV↗