arXiv subjects

Eduard Alarcón

Publications and source records attributed to Eduard Alarcón.

67 records · Page 4Linked to original sources

arXiv2019

Reprogrammable Graphene-based Metasurface Mirror with Adaptive Focal Point for THz Imaging

Recent emergence of metasurfaces has enabled the development of ultra-thin flat optical components through different wavefront shaping techniques at various wavelengths. However, due to the non-adaptive nature of conventional metasurfaces, the focal point of the resulting optics needs to be fixed at the design stage, thus severely limiting its reconfigurability and applicability. In this paper, we aim to overcome such constraint by presenting a flat reflective component that can be reprogrammed to focus terahertz waves at a desired point in the near-field region. To this end, we first propose a graphene-based unit cell with phase reconfigurability, and then employ the coding metasurface approach to draw the phase profile required to set the focus on the target point. Our results show that the proposed component can operate close to the diffraction limit with high focusing range and low focusing error. We also demonstrate that, through appropriate automation, the reprogrammability of the metamirror could be leveraged to develop compact terahertz scanning and imaging systems, as well as novel reconfigurable components for terahertz wireless communications.

physics.optics↗

arXiv2019

Fault Tolerance in Programmable Metasurfaces: The Beam Steering Case

Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful control over electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable or even programmable response. Reconfigurability, however, entails the integration of tuning and control circuits within the metasurface structure and, as this new paradigm moves forward, new reliability challenges may arise. This paper examines, for the first time, the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and instantiated for beam steering, which constitutes a relevant example for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 10% can still be considered acceptable.

physics.app-ph↗

arXiv2018

A General, Fault tolerant, Adaptive, Deadlock-free Routing Protocol for Network-on-chip

The paper presents a topology-agnostic greedy protocol for network-on-chip routing. The proposed routing algorithm can tolerate any number of permanent faults, and is proven to be deadlock-free. We introduce a specialized variant of the algorithm, which is optimized for 2D mesh networks, both flat and wireless. The adaptiveness and minimality of several variants this algorithm are analyzed through graph-based simulations.

cs.NI↗

arXiv2018

Modeling the EM Field Distribution within a Computer Chip Package

Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. The study of the channel inside the chip is essential to minimize latency and power. However, this requires long and computationally-intensive simulations which take a lot of time. We propose and implement an analytical model of the EM propagation inside the package based on ray tracing. This model could compute the electric field intensity inside the chip reducing the computational time several orders of magnitude with an average mismatch of only 1.7 dB.

cs.ET↗

arXiv2018

Channel Characterization for Chip-scale Wireless Communications within Computing Packages

Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses.

cs.ET↗

arXiv2018

Understanding the Modeling of Computer Network Delays using Neural Networks

Recent trends in networking are proposing the use of Machine Learning (ML) techniques for the control and operation of the network. In this context, ML can be used as a computer network modeling technique to build models that estimate the network performance. Indeed, network modeling is a central technique to many networking functions, for instance in the field of optimization, in which the model is used to search a configuration that satisfies the target policy. In this paper, we aim to provide an answer to the following question: Can neural networks accurately model the delay of a computer network as a function of the input traffic? For this, we assume the network as a black-box that has as input a traffic matrix and as output delays. Then we train different neural networks models and evaluate its accuracy under different fundamental network characteristics: topology, size, traffic intensity and routing. With this, we aim to have a better understanding of computer network modeling with neural nets and ultimately provide practical guidelines on how such models need to be trained.

cs.NI↗

arXiv2018

Medium Access Control in Wireless Network-on-Chip: A Context Analysis

Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current Network-on-Chip (NoC) techniques to manycore processors. A Wireless Network-on-Chip (WNoC) can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement of conventional and throughput-oriented wireline NoCs. However, the development of Medium Access Control (MAC) strategies needed to efficiently share the wireless medium among the increasing number of cores remains as a considerable challenge given the singularities of the environment and the novelty of the research area. In this position paper, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, to then discuss their implications on the design of MAC protocols for manycore WNoCs, with the ultimate goal of kickstarting this arguably unexplored research area.

cs.DC↗

arXiv2018

Programmable Metasurfaces: State of the Art and Prospects

Metasurfaces, ultrathin and planar electromagnetic devices with sub-wavelength unit cells, have recently attracted enormous attention for their powerful control over electromagnetic waves, from microwave to visible range. With tunability added to the unit cells, the programmable metasurfaces enable us to benefit from multiple unique functionalities controlled by external stimuli. In this review paper, we will discuss the recent progress in the field of programmable metasurfaces and elaborate on different approaches to realize them, with the tunability from global aspects, to local aspects, and to software-defined metasurfaces.

physics.app-ph↗

arXiv2018

MAC-Oriented Programmable Terahertz PHY via Graphene-based Yagi-Uda Antennas

Graphene is enabling a plethora of applications in a wide range of fields due to its unique electrical, mechanical, and optical properties. In the realm of wireless communications, graphene shows great promise for the implementation of miniaturized and tunable antennas in the terahertz band. These unique advantages open the door to new reconfigurable antenna structures which, in turn, enable novel communication protocols at different levels of the stack. This paper explores both aspects by, first, presenting a terahertz Yagi-Uda-like antenna concept that achieves reconfiguration both in frequency and beam direction simultaneously. Then, a programmable antenna controller design is proposed to expose the reconfigurability to the PHY and MAC layers, and several examples of its applicability are given. The performance and cost of the proposed scheme is evaluated through full-wave simulations and comparative analysis, demonstrating reconfigurability at nanosecond granularity with overheads below 0.02 mm$^{2}$ and 0.2 mW.

cs.ET↗

arXiv2018

Terahertz Dielectric Resonator Antenna Coupled to Graphene Plasmonic Dipole

This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic onedimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design a DRA antenna that supports the $TE_{y}^{112}$ mode at 2.4 THz and achieves a gain (IEEE) of up to 7 dBi and a radiation efficiency of up 70%. This gain is 6.5 dB higher than that of the graphene dipole alone and achieved with a moderate area overhead, demonstrating the value of the proposed structure.

cs.ET↗

arXiv2018

Graphene-Based terahertz antennas for area-constrained applications

Terahertz technology has made significant advances in the fields of spectroscopy, imaging and, more recently, wireless communications. In the latter, the use of this frequency band between 0.1 and 10 THz becomes extremely attractive due to the abundance of bandwidth and the potential for low area and power footprints, yet challenging given the large propagation losses and the lack of mature devices and circuits for terahertz operation. Maturity issues aside, this combination of features renders terahertz wireless communications desirable for highly integrated applications where area may be a decisive metric.

cs.ET↗

arXiv2016

Knowledge-Defined Networking

The research community has considered in the past the application of Artificial Intelligence (AI) techniques to control and operate networks. A notable example is the Knowledge Plane proposed by D.Clark et al. However, such techniques have not been extensively prototyped or deployed in the field yet. In this paper, we explore the reasons for the lack of adoption and posit that the rise of two recent paradigms: Software-Defined Networking (SDN) and Network Analytics (NA), will facilitate the adoption of AI techniques in the context of network operation and control. We describe a new paradigm that accommodates and exploits SDN, NA and AI, and provide use cases that illustrate its applicability and benefits. We also present simple experimental results that support its feasibility. We refer to this new paradigm as Knowledge-Defined Networking (KDN).

cs.NI↗

arXiv2014

Use of THz Photoconductive Sources to Characterize Tunable Graphene RF Plasmonic Antennas

Graphene, owing to its ability to support plasmon polariton waves in the terahertz frequency range, enables the miniaturization of antennas to allow wireless communications among nanosystems. One of the main challenges in the demonstration of graphene antennas is finding suitable terahertz sources to feed the antenna. This paper estimates the performance of a graphene RF plasmonic micro-antenna fed with a photoconductive source. The terahertz source is modeled and, by means of a full-wave EM solver, the radiated power of the device is estimated with respect to material, laser illumination and antenna geometry parameters. The results show that the proposed device radiates terahertz pulses with an average power up to 1$μ$W, proving the feasibility of feeding miniaturized graphene antennas with photoconductive materials.

physics.optics↗