arXiv subjects

Eduard Ayguadé

Publications and source records attributed to Eduard Ayguadé.

At least 19 recordsLinked to original sources

arXiv2026

Integration, Enhancements and Evaluation of Memory Simulators

Currently, there is no common methodology or set of practices for evaluating memory-system performance in integrated simulation infrastructures. As a result, studies adopt different evaluation approaches, which can lead to conflicting conclusions even for the same simulation infrastructure. We propose a validation methodology that evaluates memory-system performance from three complementary views: the memory simulator, the CPU--memory interface and the simulated application. We use these views to detect, understand and correct memory-simulation inaccuracies arising from simulator integration and simplified modeling of microarchitectural features. The methodology reveals that the application's perception of memory performance can become effectively decoupled from the detailed memory simulation. Most importantly, we identify and correct a fundamental memory-model mismatch between delayed-response cycle-accurate memory simulators and ZSim, a representative parallel CPU simulator. We demonstrate the broader applicability of these enhancements by applying them to ZSim integrations with Ramulator 2, DRAMsim3 and DRAMSys 4, covering all major public cycle-accurate memory simulators. After the corrections and enhancements, all integrations reproduce the main bandwidth--latency trends and key characteristics of the actual system. Across the evaluated simulators, STREAM bandwidth differs from actual-hardware measurements by less than 5% in most experiments, while pointer-chase latency remains 15--18% lower than on actual hardware. All simulator enhancements are released as open source.

cs.AR↗

arXiv2026

Performance and Energy Benefits of MRDIMMs

Multiplexed Rank DIMMs (MRDIMMs) have recently emerged as memory devices that enable higher bandwidth without increasing DRAM chip frequencies. This paper presents a detailed performance, power and energy evaluation of a production server with high-end MRDIMM main memory. The memory system upgrade from conventional registered DIMMs (RDIMMs) to MRDIMMs extends the bandwidth by 41% yielding 27-41% higher performance for bandwidth-bound workloads. Additionally, the latency improvement reaches hundreds of nanoseconds, benefiting a broad class of workloads sensitive to memory latency. At the same bandwidth utilization levels, RDIMMs and MRDIMMs exhibit similar power consumption. In the MRDIMM-extended bandwidth region, the performance improvements largely exceed the power increase, delivering up to 30% server energy savings for memory-bound workloads.

cs.AR↗

arXiv2024

DRAM Errors and Cosmic Rays: Space Invaders or Science Fiction?

It is widely accepted that cosmic rays are a plausible cause of DRAM errors in high-performance computing (HPC) systems, and various studies suggest that they could explain some aspects of the observed DRAM error behavior. However, this phenomenon is insufficiently studied in production environments. We analyze the correlations between cosmic rays and DRAM errors on two HPC clusters: a production supercomputer with server-class DDR3-1600 and a prototype with LPDDR3-1600 and no hardware error correction. Our error logs cover 2000 billion MB-hours for the MareNostrum 3 supercomputer and 135 million MB-hours for the Mont-Blanc prototype. Our analysis combines quantitative analysis, formal statistical methods and machine learning. We detect no indications that cosmic rays have any influence on the DRAM errors. To understand whether the findings are specific to systems under study, located at 100 meters above the sea level, the analysis should be repeated on other HPC clusters, especially the ones located on higher altitudes. Also, analysis can (and should) be applied to revisit and extend numerous previous studies which use cosmic rays as a hypothetical explanation for some aspects of the observed DRAM error behaviors.

cs.DC↗

arXiv2024

Reinforcement Learning-based Adaptive Mitigation of Uncorrected DRAM Errors in the Field

Scaling to larger systems, with current levels of reliability, requires cost-effective methods to mitigate hardware failures. One of the main causes of hardware failure is an uncorrected error in memory, which terminates the current job and wastes all computation since the last checkpoint. This paper presents the first adaptive method for triggering uncorrected error mitigation. It uses a prediction approach that considers the likelihood of an uncorrected error and its current potential cost. The method is based on reinforcement learning, and the only user-defined parameters are the mitigation cost and whether the job can be restarted from a mitigation point. We evaluate our method using classical machine learning metrics together with a cost-benefit analysis, which compares the cost of mitigation actions with the benefits from mitigating some of the errors. On two years of production logs from the MareNostrum supercomputer, our method reduces lost compute time by 54% compared with no mitigation and is just 6% below the optimal Oracle method. All source code is open source.

cs.DC↗

arXiv2022

Automated Generation of High-Performance Computational Fluid Dynamics Codes

Domain-Specific Languages (DSLs) improve programmers productivity by decoupling problem descriptions from algorithmic implementations. However, DSLs for High-Performance Computing (HPC) have two additional critical requirements: performance and scalability. This paper presents the automated process of generating, from abstract mathematical specifications of Computational Fluid Dynamics (CFD) problems, optimised parallel codes that perform and scale as manually optimised ones. We consciously combine within Saiph, a DSL for solving CFD problems, low-level optimisations and parallelisation strategies, enabling high-performance single-core executions which effectively scale to multi-core and distributed environments. Our results demonstrate how high-level DSLs can offer competitive performance by transparently leveraging state-of-the-art HPC techniques.

cs.MS↗

arXiv2021

The MAMe Dataset: On the relevance of High Resolution and Variable Shape image properties

In the image classification task, the most common approach is to resize all images in a dataset to a unique shape, while reducing their precision to a size which facilitates experimentation at scale. This practice has benefits from a computational perspective, but it entails negative side-effects on performance due to loss of information and image deformation. In this work we introduce the MAMe dataset, an image classification dataset with remarkable high resolution and variable shape properties. The goal of MAMe is to provide a tool for studying the impact of such properties in image classification, while motivating research in the field. The MAMe dataset contains thousands of artworks from three different museums, and proposes a classification task consisting on differentiating between 29 mediums (i.e. materials and techniques) supervised by art experts. After reviewing the singularity of MAMe in the context of current image classification tasks, a thorough description of the task is provided, together with dataset statistics. Experiments are conducted to evaluate the impact of using high resolution images, variable shape inputs and both properties at the same time. Results illustrate the positive impact in performance when using high resolution images, while highlighting the lack of solutions to exploit variable shapes. An additional experiment exposes the distinctiveness between the MAMe dataset and the prototypical ImageNet dataset. Finally, the baselines are inspected using explainability methods and expert knowledge, to gain insights on the challenges that remain ahead.

cs.CV↗

arXiv2021

Generating Efficient DNN-Ensembles with Evolutionary Computation

In this work, we leverage ensemble learning as a tool for the creation of faster, smaller, and more accurate deep learning models. We demonstrate that we can jointly optimize for accuracy, inference time, and the number of parameters by combining DNN classifiers. To achieve this, we combine multiple ensemble strategies: bagging, boosting, and an ordered chain of classifiers. To reduce the number of DNN ensemble evaluations during the search, we propose EARN, an evolutionary approach that optimizes the ensemble according to three objectives regarding the constraints specified by the user. We run EARN on 10 image classification datasets with an initial pool of 32 state-of-the-art DCNN on both CPU and GPU platforms, and we generate models with speedups up to $7.60\times$, reductions of parameters by $10\times$, or increases in accuracy up to $6.01\%$ regarding the best DNN in the pool. In addition, our method generates models that are $5.6\times$ faster than the state-of-the-art methods for automatic model generation.

cs.NE↗

arXiv2020

MetH: A family of high-resolution and variable-shape image challenges

High-resolution and variable-shape images have not yet been properly addressed by the AI community. The approach of down-sampling data often used with convolutional neural networks is sub-optimal for many tasks, and has too many drawbacks to be considered a sustainable alternative. In sight of the increasing importance of problems that can benefit from exploiting high-resolution (HR) and variable-shape, and with the goal of promoting research in that direction, we introduce a new family of datasets (MetH). The four proposed problems include two image classification, one image regression and one super resolution task. Each of these datasets contains thousands of art pieces captured by HR and variable-shape images, labeled by experts at the Metropolitan Museum of Art. We perform an analysis, which shows how the proposed tasks go well beyond current public alternatives in both pixel size and aspect ratio variance. At the same time, the performance obtained by popular architectures on these tasks shows that there is ample room for improvement. To wrap up the relevance of the contribution we review the fields, both in AI and high-performance computing, that could benefit from the proposed challenges.

cs.CV↗

arXiv2020

Enhancing Resource Management through Prediction-based Policies

Task-based programming models are emerging as a promising alternative to make the most of multi-/many-core systems. These programming models rely on runtime systems, and their goal is to improve application performance by properly scheduling application tasks to cores. Additionally, these runtime systems offer policies to cope with application phases that lack in parallelism to fill all cores. However, these policies are usually static and favor either performance or energy efficiency. In this paper, we have extended a task-based runtime system with a lightweight monitoring and prediction infrastructure that dynamically predicts the optimal number of cores required for each application phase, thus improving both performance and energy efficiency. Through the execution of several benchmarks in multi-/many-core systems, we show that our prediction-based policies have competitive performance while improving energy efficiency when compared to state of the art policies.

cs.DC↗

arXiv2020

Asynchronous Runtime with Distributed Manager for Task-based Programming Models

Parallel task-based programming models, like OpenMP, allow application developers to easily create a parallel version of their sequential codes. The standard OpenMP 4.0 introduced the possibility of describing a set of data dependences per task that the runtime uses to order the tasks execution. This order is calculated using shared graphs, which are updated by all threads in exclusive access using synchronization mechanisms (locks) to ensure the dependence management correctness. The contention in the access to these structures becomes critical in many-core systems because several threads may be wasting computation resources waiting their turn. This paper proposes an asynchronous management of the runtime structures, like task dependence graphs, suitable for task-based programming model runtimes. In such organization, the threads request actions to the runtime instead of doing them directly. The requests are then handled by a distributed runtime manager (DDAST) which does not require dedicated resources. Instead, the manager uses the idle threads to modify the runtime structures. The paper also presents an implementation, analysis and performance evaluation of such runtime organization. The performance results show that the proposed asynchronous organization outperforms the speedup obtained by the original runtime for different benchmarks and different many-core architectures.

cs.DC↗

arXiv2020

Extending the OpenCHK Model with Advanced Checkpoint Features

One of the major challenges in using extreme scale systems efficiently is to mitigate the impact of faults. Application-level checkpoint/restart (CR) methods provide the best trade-off between productivity, robustness, and performance. There are many solutions implementing CR at the application level. They all provide advanced I/O capabilities to minimize the overhead introduced by CR. Nevertheless, there is still room for improvement in terms of programmability and flexibility, because end-users must manually serialize and deserialize application state using low-level APIs, modify the flow of the application to consider restarts, or rewrite CR code whenever the backend library changes. In this work, we propose a set of compiler directives and clauses that allow users to specify CR operations in a simple way. Our approach supports the common CR features provided by all the CR libraries. However, it can also be extended to support advanced features that are only available in some CR libraries, such as differential checkpointing, the use of HDF5 format, and the possibility of using fault-tolerance-dedicated threads. The result of our evaluation revealed a high increase in programmability. On average, we reduced the number of lines of code by 71%, 94%, and 64% for FTI, SCR, and VeloC, respectively, and no additional overhead was perceived using our solution compared to using the backend libraries directly. Finally, portability is enhanced because our programming model allows the use of any backend library without changing any code.

cs.DC↗

arXiv2019

Random Forest as a Tumour Genetic Marker Extractor

Finding tumour genetic markers is essential to biomedicine due to their relevance for cancer detection and therapy development. In this paper, we explore a recently released dataset of chromosome rearrangements in 2,586 cancer patients, where different sorts of alterations have been detected. Using a Random Forest classifier, we evaluate the relevance of several features (some directly available in the original data, some engineered by us) related to chromosome rearrangements. This evaluation results in a set of potential tumour genetic markers, some of which are validated in the bibliography, while others are potentially novel.

q-bio.GN↗

arXiv2019

Feature discriminativity estimation in CNNs for transfer learning

The purpose of feature extraction on convolutional neural networks is to reuse deep representations learnt for a pre-trained model to solve a new, potentially unrelated problem. However, raw feature extraction from all layers is unfeasible given the massive size of these networks. Recently, a supervised method using complexity reduction was proposed, resulting in significant improvements in performance for transfer learning tasks. This approach first computes the discriminative power of features, and then discretises them using thresholds computed for the task. In this paper, we analyse the behaviour of these thresholds, with the purpose of finding a methodology for their estimation. After a comprehensive study, we find a very strong correlation between problem size and threshold value, with coefficient of determination above 90%. These results allow us to propose a unified model for threshold estimation, with potential application to transfer learning tasks.

cs.NE↗

arXiv2019

Resource-aware Elastic Swap Random Forest for Evolving Data Streams

Continual learning based on data stream mining deals with ubiquitous sources of Big Data arriving at high-velocity and in real-time. Adaptive Random Forest ({\em ARF}) is a popular ensemble method used for continual learning due to its simplicity in combining adaptive leveraging bagging with fast random Hoeffding trees. While the default ARF size provides competitive accuracy, it is usually over-provisioned resulting in the use of additional classifiers that only contribute to increasing CPU and memory consumption with marginal impact in the overall accuracy. This paper presents Elastic Swap Random Forest ({\em ESRF}), a method for reducing the number of trees in the ARF ensemble while providing similar accuracy. {\em ESRF} extends {\em ARF} with two orthogonal components: 1) a swap component that splits learners into two sets based on their accuracy (only classifiers with the highest accuracy are used to make predictions); and 2) an elastic component for dynamically increasing or decreasing the number of classifiers in the ensemble. The experimental evaluation of {\em ESRF} and comparison with the original {\em ARF} shows how the two new components contribute to reducing the number of classifiers up to one third while providing almost the same accuracy, resulting in speed-ups in terms of per-sample execution time close to 3x.

cs.LG↗

arXiv2018

A Visual Distance for WordNet

Measuring the distance between concepts is an important field of study of Natural Language Processing, as it can be used to improve tasks related to the interpretation of those same concepts. WordNet, which includes a wide variety of concepts associated with words (i.e., synsets), is often used as a source for computing those distances. In this paper, we explore a distance for WordNet synsets based on visual features, instead of lexical ones. For this purpose, we extract the graphic features generated within a deep convolutional neural networks trained with ImageNet and use those features to generate a representative of each synset. Based on those representatives, we define a distance measure of synsets, which complements the traditional lexical distances. Finally, we propose some experiments to evaluate its performance and compare it with the current state-of-the-art.

cs.CL↗

arXiv2018

Low-Precision Floating-Point Schemes for Neural Network Training

The use of low-precision fixed-point arithmetic along with stochastic rounding has been proposed as a promising alternative to the commonly used 32-bit floating point arithmetic to enhance training neural networks training in terms of performance and energy efficiency. In the first part of this paper, the behaviour of the 12-bit fixed-point arithmetic when training a convolutional neural network with the CIFAR-10 dataset is analysed, showing that such arithmetic is not the most appropriate for the training phase. After that, the paper presents and evaluates, under the same conditions, alternative low-precision arithmetics, starting with the 12-bit floating-point arithmetic. These two representations are then leveraged using local scaling in order to increase accuracy and get closer to the baseline 32-bit floating-point arithmetic. Finally, the paper introduces a simplified model in which both the outputs and the gradients of the neural networks are constrained to power-of-two values, just using 7 bits for their representation. The evaluation demonstrates a minimal loss in accuracy for the proposed Power-of-Two neural network, avoiding the use of multiplications and divisions and thereby, significantly reducing the training time as well as the energy consumption and memory requirements during the training and inference phases.

cs.LG↗

arXiv2018

On the Behavior of Convolutional Nets for Feature Extraction

Deep neural networks are representation learning techniques. During training, a deep net is capable of generating a descriptive language of unprecedented size and detail in machine learning. Extracting the descriptive language coded within a trained CNN model (in the case of image data), and reusing it for other purposes is a field of interest, as it provides access to the visual descriptors previously learnt by the CNN after processing millions of images, without requiring an expensive training phase. Contributions to this field (commonly known as feature representation transfer or transfer learning) have been purely empirical so far, extracting all CNN features from a single layer close to the output and testing their performance by feeding them to a classifier. This approach has provided consistent results, although its relevance is limited to classification tasks. In a completely different approach, in this paper we statistically measure the discriminative power of every single feature found within a deep CNN, when used for characterizing every class of 11 datasets. We seek to provide new insights into the behavior of CNN features, particularly the ones from convolutional layers, as this can be relevant for their application to knowledge representation and reasoning. Our results confirm that low and middle level features may behave differently to high level features, but only under certain conditions. We find that all CNN features can be used for knowledge representation purposes both by their presence or by their absence, doubling the information a single CNN feature may provide. We also study how much noise these features may include, and propose a thresholding approach to discard most of it. All these insights have a direct application to the generation of CNN embedding spaces.

cs.NE↗

arXiv2017

Fluid Communities: A Competitive, Scalable and Diverse Community Detection Algorithm

We introduce a community detection algorithm (Fluid Communities) based on the idea of fluids interacting in an environment, expanding and contracting as a result of that interaction. Fluid Communities is based on the propagation methodology, which represents the state-of-the-art in terms of computational cost and scalability. While being highly efficient, Fluid Communities is able to find communities in synthetic graphs with an accuracy close to the current best alternatives. Additionally, Fluid Communities is the first propagation-based algorithm capable of identifying a variable number of communities in network. To illustrate the relevance of the algorithm, we evaluate the diversity of the communities found by Fluid Communities, and find them to be significantly different from the ones found by alternative methods.

cs.DS↗