arXiv subjects

Eduardo Marin

Publications and source records attributed to Eduardo Marin.

16 recordsLinked to original sources

arXiv2026

NIRC2-Pol: First Light of Near-Infrared Polarimetry on Keck II

NIRC2, the Near Infrared Camera 2 on the Keck II telescope, was recently upgraded with a new suite of polarimetric observing modes. The new polarimetry modes (referred to as NIRC2-Pol) open up a wide range of new studies, including investigations of exoplanets, the Galactic center, active galactic nuclei, and solar system objects. The new modes enabled by the upgrade span the 1.1 to 4.1 micron range (i.e. J through L' bands) and include imaging polarimetry, coronagraphic imaging polarimetry, and spectropolarimetry. NIRC2-Pol is unique, as Keck II is the largest telescope (10 m) on which AO-fed infrared polarimetry capabilities are available, one of few with L' polarimetric imaging, and the only one where there is both a polarimetric mode and a vortex coronagraph. Here, we introduce the design of NIRC2-Pol, its capabilities, and its current operational status. We also present its first on-sky results: the first L' polarimetric images of the AB Aurigae circumstellar disk. These images more clearly reveal the disk's iconic spiral arms than previous L' total intensity imaging.

astro-ph.IM↗

arXiv2026

Enabling Quantitative Polarimetry for Keck/NIRC2: Preliminary Mueller Matrix Model Calibration

The Keck/NIRC2 infrared imager was upgraded in 2025 with dual-beam polarimetric observing modes spanning approximately 1.1--4.1 microns (JHKL' bands). We present a preliminary JHK calibration of NIRC2 Polarimetry using a wavelength-dependent Mueller matrix model of the Keck tertiary mirror (M3), half-wave plate (HWP), image rotator (IMR), downstream optics, and Wollaston prism. We constrain the model downstream of M3 using dome flat sequences spanning ten HWP and nine IMR angles in each band. Although the model reproduces the dominant modulation, the residuals show structure dependent on HWP and IMR angle. Measurement matrix inversion of unpolarized standard star observations gives M3 diattenuations of 0.0119+/-0.0009, 0.0098+/-0.0004, and 0.0068+/-0.0005 in J, H, and Kp, substantially closer to Fresnel predictions for aluminum than the values derived from dome flats. The larger dome flat modulation may indicate polarization in the incident dome illumination or Mueller matrix model inaccuracies. These results establish an initial calibration framework while motivating improved input polarization constraints, fixed HWP parameters from previous laboratory measurements, model validation with polarized standard stars, and extension to L'.

astro-ph.IM↗

arXiv2026

On-sky capabilities and performance of the Keck All Sky Precision Adaptive Optics system

The Keck All Sky Precision Adaptive optics (KAPA) project upgrades the Keck I adaptive optics system to enable laser tomography using a four laser guide star (LGS) asterism. KAPA is now in operation in both narrow field and wide field modes to optimize correction on-axis or over the science field of view of the camera. The use of four LGSs, in conjunction with a tomographic reconstructor and pseudo open-loop control, leads to a significant reduction in wavefront error. We describe the overall architecture, development of the tomographic algorithm, real-time implementation and preliminary on-sky results here. By comparing the on-sky image quality with that obtained using a single LGS (sLGS) we clearly demonstrate the benefits of laser tomography, a technology which is crucial to the success of the next generation of extremely large telescopes.

astro-ph.IM↗

arXiv2026

Ground control to major time-lag: on-sky results of data-driven predictive wavefront control at Keck Observatory

Directly imaging and characterizing exoplanets requires extreme adaptive optics (XAO), which achieves exquisite wavefront correction over a small (<5") field of view. Temporal errors, where the wavefront evolves faster than the lag between wavefront sensing and control, are often a leading term in the error budget for these XAO systems. Predictive control mitigates temporal errors by predicting where the wavefront will be by the time the system correction is applied. In particular, empirical orthogonal functions (EOF) learn linear correlations in a wavefront using previous states in the wavefront sensor history. We present on-sky results of a new implementation of EOF built directly into the Keck-II real time controller. On-sky engineering tests at Keck Observatory of the predictive controller show a 20% performance improvement over a classic integrator according to wavefront residuals from the Shack-Hartmann Wavefront Sensor (SHWFS). Parameter optimization studies show that there is a clear improvement based on varying predictive filter hyper-parameters, but that within a reasonable regime, varying filter parameters does not degrade performance to notably worse than an integrator. NIRC2 imaging through the Brackett Gamma=2190nm filter shows comparable performance between an integrator and predictor, both comparing Strehl Ratio (SR) and coronagraph-free contrast. We also explore power in principal components, and find a modest improvement (on the order of 3% less area under the curve of component strength) from the predictor over the integrator. This work not only improves current observing for the Keck community, but also acts as a pathfinder for predictive control methods with extremely large telescopes.

astro-ph.IM↗

arXiv2025

Technical description and performance of the phase II version of the Keck Planet Imager and Characterizer

The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefront sensor. The use of single mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line spread function in the spectrograph. Phase II, deployed and commissioned in 2022, brought a 1000 actuator deformable mirror, beam shaping optics, a vortex mask, and other upgrades to the FIU/FEU. An additional service mission in 2024 extended operations down to y band, delivered an atmospheric dispersion corrector, and provided access to two laser frequency combs. KPIC phase II brings higher planet throughput, lower stellar leakage and many new observing modes which extend its ability to characterize exoplanets at high spectral resolution, building on the success of phase I. In this paper we present a description of the final phase II version of KPIC, along with results of system level laboratory testing and characterization showing the instrument's phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We outlined the capabilities of the various observing modes enabled by the new modules as well as efforts to compensate for static aberrations and non common path errors at Keck, which were issues that plagued phase I. Finally, we show results from commissioning.

astro-ph.IM↗

arXiv2024

Investigation of W-SiC compositionally graded films as a divertor material

W-SiC composite material is a promising plasma-facing material candidate alternative to pure W due to the low neutron activation, low impurity radiation, and low tritium diffusivity of SiC while leveraging the high erosion resistance of the W armor. Additionally, W and SiC have high thermomechanical compatibility given their similar thermal expansion rates. The present study addresses the synthesis and performance of compositionally graded W-SiC films fabricated by pulsed-DC magnetron sputtering. Compositional gradients were characterized using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), and crystallographic information was obtained using electron diffraction and X-ray diffraction (XRD). Samples were exposed to L-mode deuterium plasma discharges in the DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Post-mortem characterizations were performed using scanning electron microscopy (SEM) and XRD. Electron diffraction and XRD showed that the compositionally graded W-SiC films were composed of polycrystalline W and amorphous SiC with amorphous W+SiC interlayers. No macroscopic delamination or microstructural changes were observed under mild exposure conditions. This study serves as a preliminary examination of W-SiC compositionally graded composites as a potential candidate divertor material in future tokamak devices.

physics.plasm-ph↗

arXiv2022

Gemini North Adaptive Optics (GNAO) facility overview and status updates

The Gemini North Adaptive Optics (GNAO) facility is the upcoming AO facility for Gemini North providing a state-of-the-art AO system for surveys and time domain science in the era of JWST and Rubin operations. GNAO will be optimized to feed the Gemini infrared Multi Object Spectrograph (GIRMOS). While GIRMOS is the primary science driver for defining the capabilities of GNAO, any instrument operating with an f/32 beam can be deployed using GNAO. The GNAO project includes the development of a new laser guide star facility which will consist of four side-launched laser beams supporting the two primary AO modes of GNAO: a wide-field mode providing an improved image quality over natural seeing for a 2-arcminute circular field-of-view and a narrow-field mode providing near diffraction-limited performance over a 20x20 arcsecond square field-of-view. The GNAO wide field mode will enable GIRMOS's multi-IFU configuration in which the science beam to each individual IFU will be additionally corrected using multi-object AO within GIRMOS. The GNAO narrow field mode will feed the GIRMOS tiled IFU configuration in which all IFUs are combined into a "super"-IFU in the center of the field. GNAO also includes the development of a new Real Time Controller, a new GNAO Facility System Controller and finally the development of a new AO Bench. We present in this paper an overview of the GNAO facility and provide a status update of each product.

astro-ph.IM↗

arXiv2022

Design of SCALES: A 2-5 Micron Coronagraphic Integral Field Spectrograph for Keck Observatory

We present the design of SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) a new 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. SCALES enables low-resolution (R~50) spectroscopy, as well as medium-resolution (R~4,000) spectroscopy with the goal of discovering and characterizing cold exoplanets that are brightest in the thermal infrared. Additionally, SCALES has a 12x12" field-of-view imager that will be used for general adaptive optics science at Keck. We present SCALES's specifications, its science case, its overall design, and simulations of its expected performance. Additionally, we present progress on procuring, fabricating and testing long lead-time components.

astro-ph.IM↗

arXiv2022

Daytime calibration and testing of the Keck All sky Precision Adaptive Optics Tomography System

The development of the Keck All sky Precision Adaptive optics (KAPA) project was initiated in September 2018 to upgrade the Keck I adaptive optics (AO) system to enable laser tomography adaptive optics (LTAO) with a four laser guide star (LGS) asterism. The project includes the replacement of the existing LMCT laser with a Toptica laser, the implementation of a new real-time controller (RTC) and wavefront sensor optics and camera, and a new daytime calibration and test platform to provide the required infrastructure for laser tomography. The work presented here describes the new daytime calibration infrastructure to test the performance for the KAPA tomographic algorithms. This paper outlines the hardware infrastructure for daytime calibration and performance assessment of tomographic algorithms. This includes the implementation of an asterism simulator having fiber-coupled light sources simulating four Laser Guide Stars (LGS) and two Natural Guide Stars (NGS) at the AO bench focus, as well as the upgrade of the existing TelSim on the AO bench to simulate focal anisoplanatism and wind driven atmospheric turbulence. A phase screen, that can be adjusted in effective altitude, is used to simulate wind speeds up to 10 m/s for a duration of upto 3 s.

astro-ph.IM↗

arXiv2021

Entering into the Wide Field Adaptive Optics Era on Maunakea

As part of the National Science Foundation funded "Gemini in the Era of MultiMessenger Astronomy" (GEMMA) program, Gemini Observatory is developing GNAO, a widefield adaptive optics (AO) facility for Gemini-North on Maunakea, the only 8m-class open-access telescope available to the US astronomers in the northern hemisphere. GNAO will provide the user community with a queue-operated Multi-Conjugate AO (MCAO) system, enabling a wide range of innovative solar system, Galactic, and extragalactic science with a particular focus on synergies with JWST in the area of time-domain astronomy. The GNAO effort builds on institutional investment and experience with the more limited block-scheduled Gemini Multi-Conjugate System (GeMS), commissioned at Gemini South in 2013. The project involves close partnerships with the community through the recently established Gemini AO Working Group and the GNAO Science Team, as well as external instrument teams. The modular design of GNAO will enable a planned upgrade to a Ground Layer AO (GLAO) mode when combined with an Adaptive Secondary Mirror (ASM). By enhancing the natural seeing by an expected factor of two, GLAO will vastly improve Gemini North's observing efficiency for seeing-limited instruments and strengthen its survey capabilities for multi-messenger astronomy.

astro-ph.IM↗

arXiv2019

A High-Entropy Silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2

A high-entropy metal disilicide, (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2, has been successfully synthesized. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and electron backscatter diffraction (EBSD) collectively show the formation of a single high-entropy silicide phase. This high-entropy (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 possesses a hexagonal C40 crystal structure with ABC stacking sequence and a point group of P6222. This discovery expands the known families of high-entropy materials from metals, oxides, borides, carbides, and nitrides to a silicide, for the first time to our knowledge, as well as demonstrating that a new, non-cubic, crystal structure (with lower symmetry) can be made into high-entropy. This (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 exhibits high nanohardness of 16.7 +- 1.9 GPa and Vickers hardness of 11.6 +- 0.5 GPa. Moreover, it has a low thermal conductivity of 6.9 +- 1.1 W m-1 K-1, which is approximately one order of magnitude lower than that of the widely-used tetragonal MoSi2 and ~1/3 of those reported values for the hexagonal NbSi2 and TaSi2 with the same crystal structure.

cond-mat.mtrl-sci↗

arXiv2019

Paradigm shift in electron-based crystallography via machine learning

Accurately determining the crystallographic structure of a material, organic or inorganic, is a critical primary step in material development and analysis. The most common practices involve analysis of diffraction patterns produced in laboratory XRD, TEM, and synchrotron X-ray sources. However, these techniques are slow, require careful sample preparation, can be difficult to access, and are prone to human error during analysis. This paper presents a newly developed methodology that represents a paradigm change in electron diffraction-based structure analysis techniques, with the potential to revolutionize multiple crystallography-related fields. A machine learning-based approach for rapid and autonomous identification of the crystal structure of metals and alloys, ceramics, and geological specimens, without any prior knowledge of the sample, is presented and demonstrated utilizing the electron backscatter diffraction (EBSD) technique. Electron backscatter diffraction patterns are collected from materials with well-known crystal structures, then a deep neural network model is constructed for classification to a specific Bravais lattice or point group. The applicability of this approach is evaluated on diffraction patterns from samples unknown to the computer without any human input or data filtering. This is in comparison to traditional Hough transform EBSD, which requires that you have already determined the phases present in your sample. The internal operations of the neural network are elucidated through visualizing the symmetry features learned by the convolutional neural network. It is determined that the model looks for the same features a crystallographer would use, even though it is not explicitly programmed to do so. This study opens the door to fully automated, high-throughput determination of crystal structures via several electron-based diffraction techniques.

cond-mat.mtrl-sci↗

arXiv2017

Individual, Model-Independent Masses of the Closest Known Brown Dwarf Binary to the Sun

At a distance of 2~pc, our nearest brown dwarf neighbor, Luhman 16 AB, has been extensively studied since its discovery 3 years ago, yet its most fundamental parameter -- the masses of the individual dwarfs -- has not been constrained with precision. In this work we present the full astrometric orbit and barycentric motion of Luhman 16 AB and the first precision measurements of the individual component masses. We draw upon archival observations spanning 31 years from the European Southern Observatory (ESO) Schmidt Telescope, the Deep Near-Infrared Survey of the Southern Sky (DENIS), public FORS2 data on the Very Large Telescope (VLT), and new astrometry from the Gemini South Multiconjugate Adaptive Optics System (GeMS). Finally, we include three radial velocity measurements of the two components from VLT/CRIRES, spanning one year. With this new data sampling a full period of the orbit, we use a Markov Chain Monte Carlo algorithm to fit a 16-parameter model incorporating mutual orbit and barycentric motion parameters and constrain the individual masses to be~$27.9^{+1.1}_{-1.0}$~$M_{J}$ for the T dwarf and~$34.2^{+1.3}_{-1.1}$~$M_{J}$ for the L dwarf. Our measurements of Luhman 16 AB's mass ratio and barycentric motion parameters are consistent with previous estimates in the literature utilizing recent astrometry only. The GeMS-derived measurements of the Luhman 16 AB separation in 2014-2015 agree closely with Hubble Space Telescope (HST) measurements made during the same epoch Bedin et al. 2017, and the derived mutual orbit agrees with those measurements to within the HST uncertainties of $0.3 - 0.4$ milliarcseconds.

astro-ph.SR↗

arXiv2017

Multi-conjugated adaptive optics imaging of distant galaxies -- A comparison of Gemini/GSAOI and VLT/HAWK-I data

Multi-conjugated adaptive optics (MCAO) yield nearly diffraction-limited images at 2$μ$m wavelengths. Currently, GeMS/GSAOI at Gemini South is the only MCAO facility instrument at an 8m telescope. Using real data and for the first time, we investigate the gain in depth and S/N when MCAO is employed for $K_{\rm s}$-band observations of distant galaxies. Our analysis is based on the Frontier Fields cluster MACS J0416.1-2403, observed with GeMS/GSAOI (near diffraction-limited) and compared against VLT/HAWK-I (natural seeing) data. Using galaxy number counts, we show that the substantially increased thermal background and lower optical throughput of the MCAO unit are fully compensated for by the wavefront correction, because the galaxy images can be measured in smaller apertures with less sky noise. We also performed a direct comparison of the signal-to-noise ratios (S/N) of sources detected in both data sets. For objects with intrinsic angular sizes corresponding to half the HAWK-I image seeing, the gain in S/N is 40 per cent. Even smaller objects experience a boost in S/N by a up to a factor of 2.5 despite our suboptimal natural guide star configuration. The depth of the near diffraction limited images is more difficult to quantify than that of seeing limited images, due to a strong dependence on the intrinsic source profiles. Our results emphasize the importance of cooled MCAO systems for $K_{\rm s}$-band observations with future, extremely large telescopes.

astro-ph.IM↗

arXiv2014

ILC Extraction Line Simulations with TDR Parameters

The goal of this study is to evaluate the impact of the latest ILC beam parameters at the Interaction Point (IP), as specified in the 2013 ILC Technical Design Report (TDR), on beam losses in the extraction line. The previous beam loss evaluation was based on the parameters specified in the 2007 ILC Reference Design Report (RDR). The results of this study are compared to the results obtained in the past for the ``nominal'' and the ``low power'' (low-P) parameter options of the RDR. The initial disrupted beam distribution at IP was generated using Guinea-Pig code, and the beam losses were obtained in tracking simulations using DIMAD. The study is performed for 500 GeV center-of-mass beam energy and the extraction line optics corresponding to the latest final focus optics with L* = 4.5 m, with and without detector solenoid.

physics.acc-ph↗

arXiv2014

Gemini multi-conjugate adaptive optics system review II: Commissioning, operation and overall performance

The Gemini Multi-conjugate Adaptive Optics System - GeMS, a facility instrument mounted on the Gemini South telescope, delivers a uniform, near diffraction limited images at near infrared wavelengths (0.95 microns- 2.5 microns) over a field of view of 120 arc seconds. GeMS is the first sodium layer based multi laser guide star adaptive optics system used in astronomy. It uses five laser guide stars distributed on a 60 arc seconds square constellation to measure for atmospheric distortions and two deformable mirrors to compensate for it. In this paper, the second devoted to describe the GeMS project, we present the commissioning, overall performance and operational scheme of GeMS. Performance of each sub-system is derived from the commissioning results. The typical image quality, expressed in full with half maximum, Strehl ratios and variations over the field delivered by the system are then described. A discussion of the main contributor to performance limitation is carried-out. Finally, overheads and future system upgrades are described.

astro-ph.IM↗