Searcharxiv⌕ Search

arXiv subjects

Eduardo Martínez

Publications and source records attributed to Eduardo Martínez.

At least 19 recordsLinked to original sources
arXiv2025

Analytical dispersion relation for forward volume spin waves in ferrimagnets near the angular momentum compensation condition

Antiferromagnetic magnonics has become the focus of intense scientific research because of the advantages of these materials compared to ferromagnets. However, ferrimagnetic materials have received much less attention despite exhibiting similar dynamical features at the angular momentum compensation point. In this paper, we present analytical expressions describing the dispersion relation of forward volume spin waves in ferrimagnetic materials near the angular momentum compensation point. Besides, we benchmark the derived dispersion relations with full micromagnetic simulations showing a complete agreement between both approaches. This work predicts two different branches for forward volume spin waves in ferrimagnetic materials merging into a single branch at the angular momentum compensation point. Our results can assist in the design of magnonic devices built on ferrimagnetic materials.

cond-mat.mtrl-sci↗
arXiv2024

Control of spin-orbit torque-driven domain nucleation through geometry in chirally coupled magnetic tracks

The interfacial Dzyaloshinskii-Moriya interaction (DMI) can be exploited in magnetic thin films to realize lateral chirally coupled systems, providing a way to couple different sections of a magnetic racetrack and realize interconnected networks of magnetic logic gates. Here, we systematically investigate the interplay between spin-orbit torques, chiral coupling and the device design in domain wall racetracks. We show that the current-induced domain nucleation process can be tuned between single-domain nucleation and repeated nucleation of alternate domains by changing the orientation of an in-plane patterned magnetic region within an out-of-plane magnetic racetrack. Furthermore, by combining experiments and micromagnetic simulations, we show that the combination of damping-like and field-like spin-orbit torques with DMI results in selective domain wall injection in one of two arms of a Y-shaped devices depending on the current density. Such an element constitutes the basis of domain wall based demultiplexer, which is essential for distributing a single input to any one of the multiple outputs in logic circuits. Our results provide input for the design of reliable and multifunctional domain-wall circuits based on chirally coupled interfaces.

cond-mat.mes-hall↗
arXiv2024

Geometrical design for pure current-driven domain wall nucleation and shifting

Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecond-duration current pulses nucleate and drive series of robust up/down domains even under realistic conditions. These results demonstrate a technique for sequentially nucleating and shifting domain walls without using attached external bit lines, fields or modifying the ferromagnetic strip.

cond-mat.mtrl-sci↗
arXiv2024

Current-Driven Domain Wall Motion in Curved Ferrimagnetic Strips Above and Below the Angular Momentum Compensation

Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show that domain walls can propagate faster and without a significant distortion in such strips in contrast to their ferromagnetic counterparts. Using an artificial system based on a straight strip with an equivalent current density distribution, we can discern its influence on the wall terminal velocity, as part of a more general geometrical influence due to the curved shape. Curved and narrow ferrimagnetic strips are promising candidates for designing high speed and fast response spintronic circuitry based on current-driven domain wall motion.

cond-mat.mtrl-sci↗
arXiv2024

Spin Waves in Ferrimagnets near the Angular Magnetization Compensation Temperature: A Micromagnetic Study

Spin wave propagation along a ferrimagnetic strip with out-of-plane magnetization is studied by means of micromagnetic simulations. The ferrimagnetic material is considered as formed by two antiferromagnetically coupled sublattices. Two critical temperatures can be defined for such systems: that of magnetization compensation and that of angular momentum compensation, both different due to distinct Landé factors for each sub-lattice. Spin waves in the strip are excited by a spin current injected at one of its edges. The obtained dispersion diagrams show exchange-dominated forward volume spin waves. For a given excitation frequency, Néel vector describes highly eccentric orbits, the eccentricity depending on temperature, whose semi-major axis are oriented differently at distinct locations on the FiM strip.

cond-mat.mtrl-sci↗
arXiv2023

Dielectric Assist Accelerating Structures for Compact Linear Accelerators of Low Energy Particles in Hadrontherapy Treatments

Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM$_{02}$-$π$ mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, such as protons or carbon ions used for Hadrontherapy treatments, is shown. Four dielectric materials with different permittivity and loss tangent are studied as well as different particle velocities. Through optimization, a design that concentrates most of the RF power in the vacuum space near the beam axis is obtained, leading to a significant reduction of power loss on the metallic walls. This allows to fabricate cavities with an extremely high quality factor, over 100 000, and shunt impedance over 300 M$Ω$/m at room temperature. During the numerical study, the design optimization has been improved by adjusting some of the cell parameters in order to both increase the shunt impedance and reduce the peak electric field in certain locations of the cavity, which can lead to instabilities in its normal functioning.

physics.acc-ph↗
arXiv2023

Non-resonant ultra-fast multipactor regime in dielectric-assist accelerating structures

The objective of this work is the evaluation of the risk of suffering a multipactor discharge in an S-band dielectric-assist accelerating (DAA) structure for a compact low-energy linear particle accelerator dedicated to hadrontherapy treatments. A DAA structure consists of ultra-low loss dielectric ciylinders and disks with irises which are periodically arranged in a metallic enclosure, with the advantage of having an extremely high quality factor and very high shunt impedance at room temperature, and it is therefore proposed as a potential alternative to conventional disk-loaded copper structures. However, it has been observed that these structures suffer from multipactor discharges. In fact, multipactor is one of the main problems of these devices, as it limits the maximum accelerating gradient. Because of this, the analysis of multipactor risk in the early design steps of DAA cavities is crucial to ensure the correct performance of the device after fabrication. In this paper, we present a comprehensive and detailed study of multipactor in our DAA design through numerical simulations performed with an in-house developed code based on the Monte-Carlo method. The phenomenology of the multipactor (resonant electron trajectories, electron flight time between impacts, etc.) is described in detail for different values of the accelerating gradient. It has been found that in these structures an ultra-fast non-resonant multipactor appears, which is different from the types of multipactor theoretically studied in the scientific literature. In addition, the effect of several low electron emission coatings on the multipactor threshold is investigated. Furthermore, a novel design based on the modification of the DAA cell geometry for multipactor mitigation is introduced, which shows a significant increase in the accelerating gradient handling capabilities of our prototype.

physics.acc-ph↗
arXiv2023

Sundman transformation and alternative tangent structuresSundman transformation and alternative tangent structures

A geometric approach to Sundman transformation defined by basic functions for systems of second-order differential equations is developed and the necessity of a change of the tangent structure by means of the function defining the Sundman transformation is shown. Among other applications of such theory we study the linearisability of a system of second-order differential equations and in particular the simplest case of a second-order differential equation. The theory is illustrated with several examples.

math-ph↗
arXiv2023

New physics in $WWγ$ at one loop via Majorana neutrinos

Current experimental data guarantees the presence of physics beyond the Standard Model in the neutrino sector. The responsible physical description might show itself through virtual effects on low-energy observables. In particular, massive neutrinos are able to produce contributions to the triple gauge coupling $WWγ$. The present paper deals with the calculation, estimation and analysis of one-loop contributions from Majorana neutrinos to the Lorentz-covariant $WWγ$ parametrization. Our calculations show that CP-odd effects vanish exactly, whereas CP-even contributions, $Δκ$ and $ΔQ$, remain. According to our estimations, the effects from heavy neutrinos with masses in the range of hundreds of GeVs dominate over those from light neutrinos. This investigation shows that contributions from heavy Majorana neutrinos to the anomaly $Δκ$ could be as large as $\sim{\cal O}(10^{-3})$, one order of magnitude below the Standard-Model contribution. We find that the International Linear Collider, sensitive to triple gauge couplings participating in $WW$ production, might measure these effects in electron-positron collisions at a center-of-mass energy of $800\,{\rm GeV}$, as long as heavy-neutrino masses are $\gtrsim300\,{\rm GeV}$ and below $\sim1500\,{\rm GeV}$.

hep-ph↗
arXiv2022

Infinitesimal time reparametrisation and its applications

A geometric approach to Sundman infinitesimal time-reparametrisation is given and some of its applications are used to illustrate the general theory. Special emphasis is put on geodesic motions and systems described by mechanical type Lagrangians. The Jacobi metric appears as a particular case of a Sundman transformation.

math-ph↗
arXiv2021

Domain Wall Motion in Magnetic Nanostrips

Domain walls are the transition regions between two magnetic domains. These objects have been very relevant during the last decade, not only due to their intrinsic interest in the development of novel spintronics devices but also because of their fundamental interest. The study of domain wall has been linked to the research on novel spin-orbit coupling phenomena such as the Dzyaloshinskii-Moriya interaction and the spin Hall effect amount others. Domain walls can be nucleated in ferromagnetic nanostrips and can be driven by conventional magnetic fields and spin currents due to the injection of electrical pulses, which make them very promising for technological applications of recording and logic devices. In this review, based on full micromagnetic simulations supported by extended one-dimensional models, we describe the static and dynamic properties of domain walls in thin ferromagnetic and ferrimagnetic wires with perpendicular magnetic anisotropy. The present chapter aims to provide a fundamental theoretical description of the fundaments of domain walls, and the numerical tools and models which allow describing the DW dynamics in previous and future experimental setups.

cond-mat.mes-hall↗
arXiv2020

Novel interpretation of recent experiments on the dynamics of domain walls along ferrimagnetic strips

Domain wall motion along ferrimagnets is evaluated using micromagnetic simulations and a collective-coordinates model, both considering two sublattices with independent parameters. Analytical expressions are derived for strips on top of either a heavy metal or a substrate with negligible interfacial Dzyaloshinskii-Moriya Interaction. The work focuses its findings in this latter case, with a field-driven domain wall motion depicting precessional dynamics which become rigid at the angular momentum compensation temperature, and a current-driven dynamics presenting more complex behavior, depending on the polarization factors for each sublattice. Importantly, our analyses provide also novel interpretation of recent evidence on current-driven domain wall motion, where walls move either along or against the current depending on temperature. Besides, our approach is able to substantiate the large non-adiabatic effective parameters found for these systems.

physics.app-ph↗
arXiv2019

On the construction of the linearization of a nonlinear connection

The construction of a linear connection on a pullback bundle from a connection on a vector bundle is explained in terms of fiberwise linear approximation. This procedure clarifies the geometric meaning of the linearized connection as well as the associated parallel transport and curvature.

math.DG↗
arXiv2019

Current driven domain wall dynamics in ferrimagnetic strips explained by means of a two interacting sublattices model

The current-driven domain wall dynamics along ferrimagnetic systems are here theoretically analyzed as a function of the temperature by means of micromagnetic simulations and a one dimensional model. Contrarily to conventional effective approaches, our model takes into account the two coupled ferromagnetic sublattices forming the ferrimagnetic system. Although the model is suitable for systems with asymmetric exchange interaction and spin-orbit coupling effects due to adjacent heavy metal layers, we here focus our attention on the case of single-layer ferrimagnetic strips where domain walls adopt achiral Bloch configurations at rest. Such domain walls can be driven by either out-of-plane fields or spin transfer torques upon bulk current injection. Our results indicate that the domain wall velocity is optimized at the angular compensation temperature for both field-driven and current-driven cases. Our advanced models allow us to infer that the precession of the internal domain wall moments is suppressed at such compensation temperature, and they will be useful to interpret state-of-the art experiments on these systems.

physics.app-ph↗
arXiv2019

Current-driven domain wall dynamics in ferrimagnets: micromagnetic approach and collective coordinates model

Theoretical studies dealing with current-driven domain wall dynamics in ferrimagnetic alloys and, by extension, other antiferromagnetically coupled systems as some multilayers, are here presented. The analysis has been made by means of micromagnetic simulations that consider these systems as constituted by two subsystems coupled in terms of an additional exchange interlacing them. Both subsystems differ in their respective gyromagnetic ratios and temperature dependence. Other interactions, as for example anisotropic exchange or spin-orbit torques, can be accounted for differently within each subsystem according to the physical structure. Micromagnetic simulations are also endorsed by means of a collective coordinates model which, in contrast with some previous approaches to these antiferromagnetically coupled systems, based on effective parameters, also considers them as formed by two coupled subsystems with experimentally definite parameters. Both simulations and the collective model reinforce the angular moment compensation argument as accountable for the linear increase with current of domain wall velocities in these alloys at a certain temperature or composition. Importantly, the proposed approach by means of two coupled subsystems permits to infer relevant results in the development of future experimental setups that are unattainable by means of effective models.

physics.app-ph↗
arXiv2018

Current-driven domain wall motion along ferromagnetic strips with periodically-modulated perpendicular anisotropy

The dynamics of magnetic domain walls along ferromagnetic strips with spatially modulated perpendicular magnetic anisotropy is theoretically studied by means of micromagnetic simulations. Ferromagnetic layers with a periodic sawtooth profile of the anisotropy depict a well-defined set of energy minima where the walls are pinned in the absence of external stimuli, and favor the unidirectional propagation of domain walls. The performance of the current-driven domain wall motion along these ratchet-like systems is compared to the field-driven case. Our study indicates that the current-driven domain wall motion exhibits significant improvements with respect to the field-driven case in terms of bit shifting speed and storage density, and therefore, it is suggested for the development of novel devices. The feasibility of these current-driven ratchet devices is studied by means of realistic micromagnetic simulations and supported by a one-dimensional model updated to take into account the periodic sawthooth anisotropy profile. Finally, the current-driven domain wall motion is also evaluated in systems with a triangular modulation of the anisotropy designed to promote the bidirectional shifting of series of walls, a functionality that cannot be achieved by magnetic fields.

cond-mat.mtrl-sci↗