arXiv subjects

Edward R. Smith

Publications and source records attributed to Edward R. Smith.

11 recordsLinked to original sources

arXiv2025

Study of arbitrarily low shear rate rheology using dissipative particle dynamics

The use of dissipative particle dynamics (DPD) simulation to study the rheology of fluids under shear has always been of great interest to the research community. Despite being a powerful tool, a limitation of DPD is the need to use high shear rates to obtain viscosity results with a sufficiently high signal-to-noise ratio (SNR). This often leads to simulations with unrealistically large deformations that do not reflect typical stress conditions on the fluid. In this work, the transient time correlation function (TTCF) technique is used for a simple Newtonian DPD fluid to achieve high SNR results even at arbitrarily low shear rates. The applicability of the TTCF on DPD systems is assessed, and the modifications required by the nature of the DPD force field are discussed. The results showed that the standard error (SE) of viscosity values obtained with TTCF is consistently lower than that of the classic averaging procedure across all tested shear rates. Moreover, the SE resulted proportional to the shear rate, leading to a constant SNR that does not decrease at lower shear rates. Additionally, the effect of trajectory mapping on DPD is studied, and a TTCF approach that does not require mappings is consolidated. Remarkably, the absence of mappings has not reduced the precision of the method compared with the more common mapped approach.

physics.flu-dyn↗

arXiv2025

The influence of boundary conditions and interfacial slip on the time taken to achieve a nonequilibrium steady-state for highly confined flows

We investigate the equilibration time to attain steady-state for a system of liquid molecules under boundary-driven planar Couette flow via nonequilibrium molecular dynamics (NEMD) simulation. In particular, we examine the equilibration time for the two common types of boundary driven flow: one in which both walls slide with equal and opposite velocity, and the other in which one wall is fixed and the other moves with twice the velocity. Both flows give identical steady-state strain rates, and hence flow properties, but the transient behaviour is completely different. We find that in the case of no-slip boundary conditions, the equilibration times for the counter-sliding walls flow are exactly 4 times faster than those of the single sliding wall system, and this is independent of the atomistic nature of the fluid, i.e., it is an entirely hydrodynamic feature. We also find that systems that exhibit slip have longer equilibration times in general and the ratio of equilibration times for the two types of boundary-driven flow is even more pronounced. We analyse the problem by decomposing a generic planar Couette flow into a linear sum of purely symmetric and antisymmetric flows. We find that the no-slip equilibration time is dominated by the slowest decaying eigenvalue of the solution to the Navier-Stokes equation. In the case of slip, the longest relaxation time is now dominated by the transient slip velocity response, which is longer than the no-slip response time. In the case of a high-slip system of water confined to graphene channels, the enhancement is over two orders of magnitude.

physics.flu-dyn↗

arXiv2024

Mechanical and thermodynamic routes to the liquid-liquid interfacial tension and mixing free energy by molecular dynamics

In this study, we carried out equilibrium molecular dynamics (EMD) simulations of the liquid-liquid interface between two different Lennard-Jones components with varying miscibility, where we examined the relation between the interfacial tension and isolation free energy using both a mechanical and thermodynamic approach. Using the mechanical approach, we obtained a stress distribution around a quasi-one-dimensional (1D) EMD systems with a flat LL interface. From the stress distribution, we calculated the liquid-liquid interfacial tension based on Bakker's equation, which uses the stress anisotropy around the interface, and measures how it varies with miscibility. The second approach uses thermodynamic integration by enforcing quasi-static isolation of the two liquids to calculate the free energy. This uses the same EMD systems as the mechanical approach, with both extended dry-surface and phantom-wall (PW) schemes applied. When the two components were immiscible, the interfacial tension and isolation free energy were in good agreement, provided all kinetic and interaction contributions were included in the stress. When the components were miscible, the values were significantly different. From the result of PW for the case of completely mixed liquids, the difference was attributed to the additional free energy required to separate the binary mixture into single components against the osmotic pressure prior to the complete detachment of the two components, i.e., the free energy of mixing.

cond-mat.soft↗

arXiv2024

Measuring line tension: thermodynamic integration during detachment of a molecular dynamics droplet

The contact line (CL) is where solid, liquid and vapor phases meet, and Young's equation describes the macroscopic force balance of the interfacial tensions between these three phases. These interfacial tensions are related to the nanoscale stress inhomogeneity appearing around the interface, and for curved CLs, eg a three-dimensional droplet, another force known as the line tension must be included in Young's equation. The line tension has units of force, acting parallel to the CL, and is required to incorporate the extra stress inhomogeneity around the CL into the force balance. Considering this feature, Bey et al. [J. Chem. Phys. \textbf{152}, 094707 (2020)] reported a mechanical approach to extract the value of line tension $\taul$ from molecular dynamics (MD) simulations. In this study, we show a novel thermodynamics interpretation of the line tension as the free energy per CL length, and based on this interpretation, through MD simulations of a quasi-static detachment process of a quasi-two-dimensional droplet from a solid surface, we obtained the value $\taul$ as a function of the contact angle. The simulation scheme is considered to be an extension of a thermodynamic integration method, previously used to calculate the solid-liquid and solid-vapor interfacial tensions through a detachment process, extended here to the three phase system. The obtained value agreed well with the result by Bey et al. and show the validity of thermodynamic integration at the three-phase interface.

physics.chem-ph↗

arXiv2023

TTCF4LAMMPS: A toolkit for simulation of the non-equilibrium behaviour of molecular fluids at experimentally accessible shear rates

We present TTCF4LAMMPS, a toolkit for performing non-equilibrium molecular dynamics (NEMD) simulations to study fluid behaviour at low shear rates using the LAMMPS software. By combining direct NEMD simulations and the transient-time correlation function (TTCF) technique, we study the behaviour of fluids over shear rates spanning $15$ orders of magnitude. We present two example systems consisting of simple monatomic systems: one containing a bulk liquid and another with a liquid layer confined between two solid walls. The small bulk system is suitable for testing on personal computers, while the larger confined system requires high-performance computing (HPC) resources. We demonstrate that the TTCF formalism can successfully detect the system response for arbitrarily weak external fields. We provide a brief mathematical explanation for this feature. Although we showcase the method for simple monatomic systems, TTCF can be readily extended to study more complex molecular fluids. Moreover, in addition to shear flows, the method can be extended to investigate elongational or mixed flows as well as thermal or electric fields. The reasonably high computational cost needed for the method is offset by the two following benefits: i) the cost is independent of the magnitude of the external field, and ii) the simulations can be made highly efficient on HPC architectures by exploiting the parallel design of LAMMPS. We expect the toolkit to be useful for computational researchers striving to study the nonequilibrium behaviour of fluids under experimentally-accessible conditions.

cond-mat.soft↗

arXiv2023

Multiscale Simulation of Fluids: Coupling Molecular and Continuum

Computer simulation is an important tool for scientific progress, especially when lab experiments are either extremely costly and difficult or lack the required resolution. However, all of the simulation methods come with limitations. In molecular dynamics (MD) simulation, the length and time scales that can be captured are limited, while computational fluid dynamics (CFD) methods are built on a range of assumptions, from the continuum hypothesis itself, to a variety of closure assumptions. To address these issues, the coupling of different methodologies provides a way to retain the best of both methods. Here, we provide a perspective on multiscale simulation based on the coupling of MD and CFD with each a distinct part of the simulation domain. This style of coupling allows molecular detail to be present only where it is needed, so CFD can model larger scales than possible with MD alone. We present a unified perspective of the literature, showing the links between state and flux coupling and discuss the various assumptions required for both. A unique challenge in such coupled simulation is obtaining averages and constraining local parts of a molecular simulation. We highlight that incorrect localisation has resulted in an error in the literature for both pressure tensor and coupling constraints. We then finish with some applications, focused on the simulation of fluids. Thus, we hope to motivate further research in this exciting area with applications across the spectrum of scientific disciplines.

physics.flu-dyn↗

arXiv2022

Slip and Stress From Low Strain-Rate Nonequilibrium Molecular Dynamics: The Transient-Time Correlation Function Technique

We derive the transient-time correlation function (TTCF) expression for the computation of phase variables of inhomogenous confined atomistic fluids undergoing boundary-driven planar shear (Couette) flow at constant pressure. Using nonequilibrium molecular dynamics simulations, we then apply the TTCF formalism to the computation of the shear stress and the slip velocity for atomistic fluids at realistic low shear rates, in systems under constant pressure and constant volume. We show that, compared to direct averaging of multiple trajectories, the TTCF method dramatically improves the accuracy of the results at low shear rates, and that it is suitable to investigate the tribology and rheology of atomistically detailed confined fluids at realistic flow rates.

cond-mat.soft↗

arXiv2021

Nonequilibrium Time Reversibility with Maps and Walks

Time-reversible dynamical simulations of nonequilibrium systems exemplify both Loschmidt's and Zermélo's paradoxes. That is, computational time-reversible simulations invariably produce solutions consistent with the {\it irreversible} Second Law of Thermodynamics (Loschmidt's) as well as {\it periodic} in the time (Zermélo's, illustrating Poincaré recurrence). Understanding these paradoxical aspects of time-reversible systems is enhanced here by studying the simplest pair of such model systems. The first is time-reversible, but nevertheless dissipative and periodic, the piecewise-linear compressible Baker Map. The fractal properties of that two-dimensional map are mirrored by an even simpler example, the one-dimensional random walk, confined to the unit interval. As a further puzzle the two models yield ambiguities in determining the fractals' information dimensions. These puzzles, including the classical paradoxes, are reviewed and explored here. We review our investigations presented in Budapest in 1997 and end with presentday questions posed as the Snook Prize Problems in 2020 and 2021.

cond-mat.stat-mech↗

arXiv2021

The Importance of Reference Frame for Pressure at the Liquid-Vapour Interface

The local pressure tensor is non-unique, a fact which has generated confusion and debate in the seventy years since the seminal work by Irving Kirkwood. This non-uniqueness is normally attributed to the interaction path between molecules, especially in the interfacial-science community. In this work we reframe this discussion of non-uniqueness in terms of the location, or reference frame, used to measure the pressure. By using a general mathematical description of the liquid-vapour interface, we obtain a reference frame that moves with the interface through time, providing a new insight into the pressure. We compare this instantaneous moving reference frame with the fixed Eulerian one. Through this process, we show the requirement that normal pressure balance at the moving surface is satisfied by surface fluxes, however an additional corrective term based on surface curvature is required for the average pressure in a volume. We make the case that a focus on the path of integration is the cause of much of the confusion in the literature. Using an explicit reference frame with a more general derivation of pressure clarifies some of the issues of uniqueness in the pressure tensor and provides a pressure tensor which is defined at any instant in time and valid away from thermodynamic equilibrium.

cond-mat.soft↗

arXiv2020

Hydrodynamics Across a Fluctuating Interface

Understanding what happens inside the rippling and dancing surface of a liquid remains one of the great challenges of fluid dynamics. Using molecular dynamics (MD) we can pick apart the interface structure and understand surface tension. In this work we derive an exact mechanical formulation of hydrodynamics for a liquid-vapour interface using a control volume which moves with the surface. This mathematical framework provides the local definition of hydrodynamic fluxes at any point on the surface. These are represented not only by the flux of molecules and intermolecular interactions acting across the surface, but also as a result of the instantaneous local curvature and movement of the surface itself. By explicitly including the surface dynamics in the equations of motion, we demonstrate an exact balance between kinetic and configurational pressure normal to the surface. The hydrodynamic analysis makes no assumptions regarding the probability distribution function, so is valid for any system arbitrarily far from thermodynamic equilibrium. The presented equations provide a theoretical basis for the study of time-evolving interface phenomena such as bubble nucleation, droplet dynamics and liquid-vapour instabilities.

physics.comp-ph↗

arXiv2019

Spreading of aqueous droplets with common and superspreading surfactants. A molecular dynamics study

The surfactant-driven spreading of droplets is an essential process in many applications ranging from coating flow technology to enhanced oil recovery. Despite the significant advancement in describing spreading processes in surfactant-laden droplets, including the exciting phenomena of superspreading, many features of the underlying mechanisms require further understanding. Here, we have carried out molecular dynamics simulations of a coarse-grained model with a force-field obtained from the statistical associating fluid theory to study droplets laden with common and superspreading surfactants. We have confirmed the important elements of the superspreading mechanism, i.e. the adsorption of surfactant at the contact line and the fast replenishment of surfactant from the bulk. Through a detailed comparison of a range of droplets with different surfactants, our analysis has indicated that the ability of surfactant to adsorb at the interfaces is the key feature of the superspreading mechanism. To this end, surfactants that tend to form aggregates and have a strong hydrophobic attraction in the aggregated cores prevent the fast replenishment of the interfaces, resulting in reduced spreading ability. We also show that various surfactant properties, such as diffusion and architecture, play a secondary role in the spreading process. Moreover, we discuss various drop properties such as the height, contact angle, and surfactant surface concentration, highlighting differences between superspreading and common surfactants. We anticipate that our study will provide further insight for applications requiring the control of wetting.

physics.flu-dyn↗