SearcharxivSearch

arXiv subjects

Edward Seidel

Publications and source records attributed to Edward Seidel.

At least 19 recordsLinked to original sources

Cactus Framework: Black Holes to Gamma Ray Bursts

Gamma Ray Bursts (GRBs) are intense narrowly-beamed flashes of gamma-rays of cosmological origin. They are among the most scientifically interesting astrophysical systems, and the riddle concerning their central engines and emission mechanisms is one of the most complex and challenging problems of astrophysics today. In this article we outline our petascale approach to the GRB problem and discuss the computational toolkits and numerical codes that are currently in use and that will be scaled up to run on emerging petaflop scale computing platforms in the near future. Petascale computing will require additional ingredients over conventional parallelism. We consider some of the challenges which will be caused by future petascale architectures, and discuss our plans for the future development of the Cactus framework and its applications to meet these challenges in order to profit from these new architectures.

cs.DC

Isometric embeddings of black hole horizons in three-dimensional flat space

The geometry of a two-dimensional surface in a curved space can be most easily visualized by using an isometric embedding in flat three-dimensional space. Here we present a new method for embedding surfaces with spherical topology in flat space when such a embedding exists. Our method is based on expanding the surface in spherical harmonics and minimizing for the differences between the metric on the original surface and the metric on the trial surface in the space of the expansion coefficients. We have applied this method to study the geometry of back hole horizons in the presence of strong, non-axisymmetric, gravitational waves (Brill waves). We have noticed that, in many cases, although the metric of the horizon seems to have large deviations from axisymmetry, the intrinsic geometry of the horizon is almost axisymmetric. The origin of the large apparent non-axisymmetry of the metric is the deformation of the coordinate system in which the metric was computed.

gr-qc

Evolution of 3D Boson Stars with Waveform Extraction

Numerical results from a study of boson stars under nonspherical perturbations using a fully general relativistic 3D code are presented together with the analysis of emitted gravitational radiation. We have constructed a simulation code suitable for the study of scalar fields in space-times of general symmetry by bringing together components for addressing the initial value problem, the full evolution system and the detection and analysis of gravitational waves. Within a series of numerical simulations, we explicitly extract the Zerilli and Newman-Penrose scalar $Ψ_4$ gravitational waveforms when the stars are subjected to different types of perturbations. Boson star systems have rapidly decaying nonradial quasinormal modes and thus the complete gravitational waveform could be extracted for all configurations studied. The gravitational waves emitted from stable, critical, and unstable boson star configurations are analyzed and the numerically observed quasinormal mode frequencies are compared with known linear perturbation results. The superposition of the high frequency nonspherical modes on the lower frequency spherical modes was observed in the metric oscillations when perturbations with radial and nonradial components were applied. The collapse of unstable boson stars to black holes was simulated. The apparent horizons were observed to be slightly nonspherical when initially detected and became spherical as the system evolved. The application of nonradial perturbations proportional to spherical harmonics is observed not to affect the collapse time. An unstable star subjected to a large perturbation was observed to migrate to a stable configuration.

gr-qc

Accurate Evolution of Orbiting Binary Black Holes

We present a detailed analysis of binary black hole evolutions in the last orbit, and demonstrate consistent and convergent results for the trajectories of the individual bodies. The gauge choice can significantly affect the overall accuracy of the evolution. It is possible to reconcile certain gauge dependent discrepancies by examining the convergence limit. We illustrate these results using an initial data set recently evolved by Bruegmann (Phys. Rev. Lett. 92, 211101). For our highest resolution and most accurate gauge, we estimate the duration of this data set's last orbit to be approximately $59 M_{ADM}$.

gr-qc

Dynamical evolution of quasi-circular binary black hole data

We study the fully nonlinear dynamical evolution of binary black hole data, whose orbital parameters are specified via the effective potential method for determining quasi-circular orbits. The cases studied range from the Cook-Baumgarte innermost stable circular orbit (ISCO) to significantly beyond that separation. In all cases we find the black holes to coalesce (as determined by the appearance of a common apparent horizon) in less than half an orbital period. The results of the numerical simulations indicate that the initial holes are not actually in quasi-circular orbits, but that they are in fact nearly plunging together. The dynamics of the final horizon are studied to determine physical parameters of the final black hole, such as its spin, mass, and oscillation frequency, revealing information about the inspiral process. We show that considerable resolution is required to extract accurate physical information from the final black hole formed in the merger process, and that the quasi-normal modes of the final hole are strongly excited in the merger process. For the ISCO case, by comparing physical measurements of the final black hole formed to the initial data, we estimate that less than 3% of the total energy is radiated in the merger process.

gr-qc

Testing excision techniques for dynamical 3D black hole evolutions

We perform both distorted black hole evolutions and binary black hole head on collisions and compare the results of using a full grid to results obtained by excising the black hole interiors. In both cases the evolutions are found to run essentially indefinitely, and produce the same, convergent waveforms. Further, since both the distorted black holes and the head-on collision of puncture initial data can be carried out without excision, they provide an excellent dynamical test-bed for excision codes. This provides a strong numerical demonstration of the validity of the excision idea, namely the event horizon can be made to "protect" the spacetime from the excision boundary and allow an accurate exterior evolution.

gr-qc

Toward standard testbeds for numerical relativity

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods, and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step toward building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources, and can be used with many different approaches used in the relativity community.

gr-qc

Three Dimensional Distorted Black Holes

We present three-dimensional, {\it non-axisymmetric} distorted black hole initial data which generalizes the axisymmetric, distorted, non-rotating [Bernstein93a] and rotating [Brandt94a] single black hole data developed by Bernstein, Brandt, and Seidel. These initial data should be useful for studying the dynamics of fully 3D, distorted black holes, such as those created by the spiraling coalescence of two black holes. We describe the mathematical construction of several families of such data sets, and show how to construct numerical solutions. We survey quantities associated with the numerically constructed solutions, such as ADM masses, apparent horizons, measurements of the horizon distortion, and the maximum possible radiation loss ($MRL$).

gr-qc

Gauge conditions for long-term numerical black hole evolutions without excision

Numerical relativity has faced the problem that standard 3+1 simulations of black hole spacetimes without singularity excision and with singularity avoiding lapse and vanishing shift fail after an evolution time of around 30-40M due to the so-called slice stretching. We discuss lapse and shift conditions for the non-excision case that effectively cure slice stretching and allow run times of 1000M and more.

gr-qc

Black Hole Excision for Dynamic Black Holes

We extend previous work on 3D black hole excision to the case of distorted black holes, with a variety of dynamic gauge conditions that are able to respond naturally to the spacetime dynamics. We show that the combination of excision and gauge conditions we use is able to drive highly distorted, rotating black holes to an almost static state at late times, with well behaved metric functions, without the need for any special initial conditions or analytically prescribed gauge functions. Further, we show for the first time that one can extract accurate waveforms from these simulations, with the full machinery of excision and dynamic gauge conditions. The evolutions can be carried out for long times, far exceeding the longevity and accuracy of even better resolved 2D codes. While traditional 2D codes show errors in quantities such as apparent horizon mass of over 100% by t = 100M, and crash by t = 150M, with our new techniques the same systems can be evolved for hundreds of M's in full 3D with errors of only a few percent.

gr-qc

The 3D Grazing Collision of Two Black Holes

We present results for two colliding black holes (BHs), with angular momentum, spin, and unequal mass. For the first time gravitational waveforms are computed for a grazing collision from a full 3D numerical evolution. The collision can be followed through the merger to form a single BH, and through part of the ringdown period of the final BH. The apparent horizon is tracked and studied, and physical parameters, such as the mass of the final BH, are computed. The total energy radiated in gravitational waves is shown to be consistent with the total mass of the spacetime and the final BH mass. The implication of these simulations for gravitational wave astronomy is discussed.

gr-qc

Towards an understanding of the stability properties of the 3+1 evolution equations in general relativity

We study the stability properties of the standard ADM formulation of the 3+1 evolution equations of general relativity through linear perturbations of flat spacetime. We focus attention on modes with zero speed of propagation and conjecture that they are responsible for instabilities encountered in numerical evolutions of the ADM formulation. These zero speed modes are of two kinds: pure gauge modes and constraint violating modes. We show how the decoupling of the gauge by a conformal rescaling can eliminate the problem with the gauge modes. The zero speed constraint violating modes can be dealt with by using the momentum constraints to give them a finite speed of propagation. This analysis sheds some light on the question of why some recent reformulations of the 3+1 evolution equations have better stability properties than the standard ADM formulation.

gr-qc

Towards a Stable Numerical Evolution of Strongly Gravitating Systems in General Relativity: The Conformal Treatments

We study the stability of three-dimensional numerical evolutions of the Einstein equations, comparing the standard ADM formulation to variations on a family of formulations that separate out the conformal and traceless parts of the system. We develop an implementation of the conformal-traceless (CT) approach that has improved stability properties in evolving weak and strong gravitational fields, and for both vacuum and spacetimes with active coupling to matter sources. Cases studied include weak and strong gravitational wave packets, black holes, boson stars and neutron stars. We show under what conditions the CT approach gives better results in 3D numerical evolutions compared to the ADM formulation. In particular, we show that our implementation of the CT approach gives more long term stable evolutions than ADM in all the cases studied, but is less accurate in the short term for the range of resolutions used in our 3D simulations.

gr-qc

Numerical Relativity As A Tool For Computational Astrophysics

The astrophysics of compact objects, which requires Einstein's theory of general relativity for understanding phenomena such as black holes and neutron stars, is attracting increasing attention. In general relativity, gravity is governed by an extremely complex set of coupled, nonlinear, hyperbolic-elliptic partial differential equations. The largest parallel supercomputers are finally approaching the speed and memory required to solve the complete set of Einstein's equations for the first time since they were written over 80 years ago, allowing one to attempt full 3D simulations of such exciting events as colliding black holes and neutron stars. In this paper we review the computational effort in this direction, and discuss a new 3D multi-purpose parallel code called ``Cactus'' for general relativistic astrophysics. Directions for further work are indicated where appropriate.

gr-qc

Gravitational Collapse of Gravitational Waves in 3D Numerical Relativity

We demonstrate that evolutions of three-dimensional, strongly non-linear gravitational waves can be followed in numerical relativity, hence allowing many interesting studies of both fundamental and observational consequences. We study the evolution of time-symmetric, axisymmetric {\it and} non-axisymmetric Brill waves, including waves so strong that they collapse to form black holes under their own self-gravity. The critical amplitude for black hole formation is determined. The gravitational waves emitted in the black hole formation process are compared to those emitted in the head-on collision of two Misner black holes.

gr-qc

The Synergy between Numerical and Perturbative Approaches to Black Holes

I describe approaches to the study of black hole spacetimes via numerical relativity. After a brief review of the basic formalisms and techniques used in numerical black hole simulations, I discuss a series of calculations from axisymmetry to full 3D that can be seen as stepping stones to simulations of the full 3D coalescence of two black holes. In particular, I emphasize the interplay between perturbation theory and numerical simulation that build both confidence in present results and tools to aid and to interpret results of future simulations of black hole coalescence.

gr-qc

Numerical Relativity: Towards Simulations of 3D Black Hole Coalescence

I review recent developments in numerical relativity, focussing on progress made in 3D black hole evolution. Progress in development of black hole initial data, apparent horizon boundary conditions, adaptive mesh refinement, and characteristic evolution is highlighted, as well as full 3D simulations of colliding and distorted black holes. For true 3D distorted holes, with Cauchy evolution techniques, it is now possible to extract highly accurate, nonaxisymmetric waveforms from fully nonlinear simulations, which are verified by comparison to pertubration theory, and with characteristic techniques extremely long term evolutions of 3D black holes are now possible. I also discuss a new code designed for 3D numerical relativity, called Cactus, that will be made public.

gr-qc

Black Hole Spectroscopy: Determining Waveforms from 3D Excited Black Holes

We present the first results for Cauchy nonlinear evolution of 3D, nonaxisymmetric distorted black holes. We focus on the extraction and verification of 3D waveforms determined by numerical relativity. We show that the black hole evolution can be accurately followed through the ringdown period, and comparing with a recently developed perturbative evolution technique, we show that many waveforms in the black hole spectrum of modes, such as l=2 and l=4, including weakly excited nonaxisymmetric modes with m not zero, can be accurately evolved and extracted from the full nonlinear numerical evolution. We also identify new physics contained in higher modes, due to nonlinear effects. The implications for simulations related to gravitational wave astronomy are discussed.

gr-qc