arXiv subjects

Efi Psomopoulou

Publications and source records attributed to Efi Psomopoulou.

16 recordsLinked to original sources

arXiv2026

Towards Artificial Nerves: Biomimetic Optical-Fiber Tactile Sensing for Robots

Robotic systems increasingly demand tactile sensing that approaches the adaptability and resolution of human skin to enable dexterous manipulation and safe interaction. OptiTac is a biomimetic tactile sensor that emulates the mechanoreceptor-to-nerve architecture of human touch by pairing each mechanical pin on a soft skin with an optical fiber acting as an artificial nerve. This design demonstrates an architectural principle for routing tactile information away from the sensing surface while preserving high spatial resolution, establishing a practical route toward distributed tactile sensing in future robotic systems. By treating tactile signals as images, simple analytical methods, rather than opaque deep-learning models, are used to infer contact location, size, and shape, providing interpretable and scalable tactile intelligence. This work demonstrates how evolutionary principles from biology can guide the development of artificial nerve systems for robots, offering a pathway toward human-like tactile perception in next-generation robotic platforms. More broadly, OptiTac establishes an artificial nerve-inspired sensing framework for interpretable robotic touch and a scalable route toward future distributed tactile systems.

cs.RO↗

arXiv2026

Static and Dynamic Representations for Tactile Contact-Angle Estimation with Event-Based Sensors

Event-based tactile sensing offers low-latency signal acquisition for contact-rich robotic interaction. This paper investigates contact-angle estimation using event streams from an event-based tactile sensor (NeuroTac) and compares three event-derived spatial contour representations: a dynamic representation capturing recent event activity, a static representation recovering a more persistent contact state, and their combined representation. Across the evaluated motion scenarios, all representation pipelines exhibited P99 processing latency below 10 ms at all tested sampling intervals, demonstrating their potential for high-frequency event-based tactile angle estimation in robotic manipulation. The static representation consistently achieved marginally better performance than the dynamic and combined representations under scenario-specific training, yielding a mean overall MAE of 0.160° during continuous sensor rolling and a stop-phase mean MAE of 0.251° during randomly inserted motion interruptions. It also exhibited smaller performance fluctuations across speed and indentation depth variations than the other two representations.

cs.RO↗

arXiv2026

NeuralTouch: Neural Descriptors for Precise Sim-to-Real Tactile Robot Control

Grasping accuracy is a critical prerequisite for precise object manipulation, often requiring careful alignment between the robot hand and object. Neural Descriptor Fields (NDF) offer a promising vision-based method to generate grasping poses that generalize across object categories. However, NDF alone can produce inaccurate poses due to imperfect camera calibration, incomplete point clouds, and object variability. Meanwhile, tactile sensing enables more precise contact, but existing approaches typically learn policies limited to simple, predefined contact geometries. In this work, we introduce NeuralTouch, a multimodal framework that integrates NDF and tactile sensing to enable accurate, generalizable grasping through gentle physical interaction. Our approach leverages NDF to implicitly represent the target contact geometry, from which a deep reinforcement learning (RL) policy is trained to refine the grasp using tactile feedback. This policy is conditioned on the neural descriptors and does not require explicit specification of contact types. We validate NeuralTouch through ablation studies in simulation and zero-shot transfer to real-world manipulation tasks--such as peg-out-in-hole and bottle lid opening--without additional fine-tuning. Results show that NeuralTouch significantly improves grasping accuracy and robustness over baseline methods, offering a general framework for precise, contact-rich robotic manipulation.

cs.RO↗

arXiv2026

SoftHand Model-W: A 3D-Printed, Anthropomorphic, Underactuated Robot Hand with Integrated Wrist and Carpal Tunnel

This paper presents the SoftHand Model-W: a 3D-printed, underactuated, anthropomorphic robot hand based on the Pisa/IIT SoftHand, with an integrated antagonistic tendon mechanism and 2 degree-of-freedom tendon-driven wrist. These four degrees-of-acuation provide active flexion and extension to the five fingers, and active flexion/extension and radial/ulnar deviation of the palm through the wrist, while preserving the synergistic and self-adaptive features of such SoftHands. A carpal tunnel-inspired tendon routing allows remote motor placement in the forearm, reducing distal inertia and maintaining a compact form factor. The SoftHand-W is mounted on a 6-axis robot arm and tested with two reorientation tasks requiring coordination between the hand and arm's pose: cube stacking and in-plane disc rotation. Results comparing task time, arm joint travel, and configuration changes with and without wrist actuation show that adding the wrist reduces compensatory and reconfiguration movements of the arm for a quicker task-completion time. Moreover, the wrist enables pick-and-place operations that would be impossible otherwise. Overall, the SoftHand Model-W demonstrates how proximal degrees of freedom are key to achieving versatile, human-like manipulation in real world robotic applications, with a compact design enabling deployment in research and assistive settings.

cs.RO↗

arXiv2026

How to Train your Tactile Model: Tactile Perception with Multi-fingered Robot Hands

Rapid deployment of new tactile sensors is essential for scalable robotic manipulation, especially in multi-fingered hands equipped with vision-based tactile sensors. However, current methods for inferring contact properties rely heavily on convolutional neural networks (CNNs), which, while effective on known sensors, require large, sensor-specific datasets. Furthermore, they require retraining for each new sensor due to differences in lens properties, illumination, and sensor wear. Here we introduce TacViT, a novel tactile perception model based on Vision Transformers, designed to generalize on new sensor data. TacViT leverages global self-attention mechanisms to extract robust features from tactile images, enabling accurate contact property inference even on previously unseen sensors. This capability significantly reduces the need for data collection and retraining, accelerating the deployment of new sensors. We evaluate TacViT on sensors for a five-fingered robot hand and demonstrate its superior generalization performance compared to CNNs. Our results highlight TacViTs potential to make tactile sensing more scalable and practical for real-world robotic applications.

cs.RO↗

arXiv2025

Educational SoftHand-A: Building an Anthropomorphic Hand with Soft Synergies using LEGO MINDSTORMS

This paper introduces an anthropomorphic robot hand built entirely using LEGO MINDSTORMS: the Educational SoftHand-A, a tendon-driven, highly-underactuated robot hand based on the Pisa/IIT SoftHand and related hands. To be suitable for an educational context, the design is constrained to use only standard LEGO pieces with tests using common equipment available at home. The hand features dual motors driving an agonist/antagonist opposing pair of tendons on each finger, which are shown to result in reactive fine control. The finger motions are synchonized through soft synergies, implemented with a differential mechanism using clutch gears. Altogether, this design results in an anthropomorphic hand that can adaptively grasp a broad range of objects using a simple actuation and control mechanism. Since the hand can be constructed from LEGO pieces and uses state-of-the-art design concepts for robotic hands, it has the potential to educate and inspire children to learn about the frontiers of modern robotics.

cs.RO↗

arXiv2025

A Neuromorphic Incipient Slip Detection System using Papillae Morphology

Detecting incipient slip enables early intervention to prevent object slippage and enhance robotic manipulation safety. However, deploying such systems on edge platforms remains challenging, particularly due to energy constraints. This work presents a neuromorphic tactile sensing system based on the NeuroTac sensor with an extruding papillae-based skin and a spiking convolutional neural network (SCNN) for slip-state classification. The SCNN model achieves 94.33% classification accuracy across three classes (no slip, incipient slip, and gross slip) in slip conditions induced by sensor motion. Under the dynamic gravity-induced slip validation conditions, after temporal smoothing of the SCNN's final-layer spike counts, the system detects incipient slip at least 360 ms prior to gross slip across all trials, consistently identifying incipient slip before gross slip occurs. These results demonstrate that this neuromorphic system has stable and responsive incipient slip detection capability.

cs.RO↗

arXiv2025

Text2Touch: Tactile In-Hand Manipulation with LLM-Designed Reward Functions

Large language models (LLMs) are beginning to automate reward design for dexterous manipulation. However, no prior work has considered tactile sensing, which is known to be critical for human-like dexterity. We present Text2Touch, bringing LLM-crafted rewards to the challenging task of multi-axis in-hand object rotation with real-world vision based tactile sensing in palm-up and palm-down configurations. Our prompt engineering strategy scales to over 70 environment variables, and sim-to-real distillation enables successful policy transfer to a tactile-enabled fully actuated four-fingered dexterous robot hand. Text2Touch significantly outperforms a carefully tuned human-engineered baseline, demonstrating superior rotation speed and stability while relying on reward functions that are an order of magnitude shorter and simpler. These results illustrate how LLM-designed rewards can significantly reduce the time from concept to deployable dexterous tactile skills, supporting more rapid and scalable multimodal robot learning. Project website: https://hpfield.github.io/text2touch-website

cs.RO↗

arXiv2025

Classification of Vision-Based Tactile Sensors: A Review

Vision-based tactile sensors (VBTS) have gained widespread application in robotic hands, grippers and prosthetics due to their high spatial resolution, low manufacturing costs, and ease of customization. While VBTSs have common design features, such as a camera module, they can differ in a rich diversity of sensing principles, material compositions, multimodal approaches, and data interpretation methods. Here, we propose a novel classification of VBTS that categorizes the technology into two primary sensing principles based on the underlying transduction of contact into a tactile image: the Marker-Based Transduction Principle and the Intensity-Based Transduction Principle. Marker-Based Transduction interprets tactile information by detecting marker displacement and changes in marker density. In contrast, Intensity-Based Transduction maps external disturbances with variations in pixel values. Depending on the design of the contact module, Marker-Based Transduction can be further divided into two subtypes: Simple Marker-Based (SMB) and Morphological Marker-Based (MMB) mechanisms. Similarly, the Intensity-Based Transduction Principle encompasses the Reflective Layer-based (RLB) and Transparent Layer-Based (TLB) mechanisms. This paper provides a comparative study of the hardware characteristics of these four types of sensors including various combination types, and discusses the commonly used methods for interpreting tactile information. This~comparison reveals some current challenges faced by VBTS technology and directions for future research.

cs.RO↗

arXiv2025

Tactile SoftHand-A: 3D-Printed, Tactile, Highly-underactuated, Anthropomorphic Robot Hand with an Antagonistic Tendon Mechanism

A challenging and important problem for tendon-driven multi-fingered robotic hands is to ensure grasping adaptivity while minimizing the number of actuators needed to provide human-like functionality. Inspired by the Pisa/IIT SoftHand, this paper introduces a 3D-printed, highly-underactuated, tactile-sensorized, five-finger robotic hand named the Tactile SoftHand-A, which features an antagonistic mechanism to actively open and close the hand. Our proposed dual-tendon design gives options that allow active control of specific (distal or proximal interphalangeal) joints; for example, to adjust from an enclosing to fingertip grasp or to manipulate an object with a fingertip. We also develop and integrate a new design of fully 3D-printed vision-based tactile sensor within the fingers that requires minimal hand assembly. A control scheme based on analytically extracting contact location and slip from the tactile images is used to coordinate the antagonistic tendon mechanism (using a marker displacement density map, suitable for TacTip-based sensors). We perform extensive testing of a single finger, the entire hand, and the tactile capabilities to show the improvements in reactivity, load-bearing, and manipulability in comparison to a SoftHand that lacks the antagonistic mechanism. We also demonstrate the hand's reactivity to contact disturbances including slip, and how this enables teleoperated control from human hand gestures. Overall, this study points the way towards a class of low-cost, accessible, 3D-printable, tactile, underactuated human-like robotic hands, and we openly release the designs to facilitate others to build upon this work. The designs are open-sourced at https://github.com/HaoranLi-Data/Tactile_SoftHand_A

cs.RO↗

arXiv2025

Shear-based Grasp Control for Multi-fingered Underactuated Tactile Robotic Hands

This paper presents a shear-based control scheme for grasping and manipulating delicate objects with a Pisa/IIT anthropomorphic SoftHand equipped with soft biomimetic tactile sensors on all five fingertips. These `microTac' tactile sensors are miniature versions of the TacTip vision-based tactile sensor, and can extract precise contact geometry and force information at each fingertip for use as feedback into a controller to modulate the grasp while a held object is manipulated. Using a parallel processing pipeline, we asynchronously capture tactile images and predict contact pose and force from multiple tactile sensors. Consistent pose and force models across all sensors are developed using supervised deep learning with transfer learning techniques. We then develop a grasp control framework that uses contact force feedback from all fingertip sensors simultaneously, allowing the hand to safely handle delicate objects even under external disturbances. This control framework is applied to several grasp-manipulation experiments: first, retaining a flexible cup in a grasp without crushing it under changes in object weight; second, a pouring task where the center of mass of the cup changes dynamically; and third, a tactile-driven leader-follower task where a human guides a held object. These manipulation tasks demonstrate more human-like dexterity with underactuated robotic hands by using fast reflexive control from tactile sensing.

cs.RO↗

arXiv2024

AnyRotate: Gravity-Invariant In-Hand Object Rotation with Sim-to-Real Touch

Human hands are capable of in-hand manipulation in the presence of different hand motions. For a robot hand, harnessing rich tactile information to achieve this level of dexterity still remains a significant challenge. In this paper, we present AnyRotate, a system for gravity-invariant multi-axis in-hand object rotation using dense featured sim-to-real touch. We tackle this problem by training a dense tactile policy in simulation and present a sim-to-real method for rich tactile sensing to achieve zero-shot policy transfer. Our formulation allows the training of a unified policy to rotate unseen objects about arbitrary rotation axes in any hand direction. In our experiments, we highlight the benefit of capturing detailed contact information when handling objects of varying properties. Interestingly, we found rich multi-fingered tactile sensing can detect unstable grasps and provide a reactive behavior that improves the robustness of the policy. The project website can be found at https://maxyang27896.github.io/anyrotate/.

cs.RO↗

arXiv2024

Learning Fine Pinch-Grasp Skills using Tactile Sensing from A Few Real-world Demonstrations

Imitation learning for robot dexterous manipulation, especially with a real robot setup, typically requires a large number of demonstrations. In this paper, we present a data-efficient learning from demonstration framework which exploits the use of rich tactile sensing data and achieves fine bimanual pinch grasping. Specifically, we employ a convolutional autoencoder network that can effectively extract and encode high-dimensional tactile information. Further, We develop a framework that achieves efficient multi-sensor fusion for imitation learning, allowing the robot to learn contact-aware sensorimotor skills from demonstrations. Our comparision study against the framework without using encoded tactile features highlighted the effectiveness of incorporating rich contact information, which enabled dexterous bimanual grasping with active contact searching. Extensive experiments demonstrated the robustness of the fine pinch grasp policy directly learned from few-shot demonstration, including grasping of the same object with different initial poses, generalizing to ten unseen new objects, robust and firm grasping against external pushes, as well as contact-aware and reactive re-grasping in case of dropping objects under very large perturbations. Furthermore, the saliency map analysis method is used to describe weight distribution across various modalities during pinch grasping, confirming the effectiveness of our framework at leveraging multimodal information.

cs.RO↗

arXiv2023

Tactile-Driven Gentle Grasping for Human-Robot Collaborative Tasks

This paper presents a control scheme for force sensitive, gentle grasping with a Pisa/IIT anthropomorphic SoftHand equipped with a miniaturised version of the TacTip optical tactile sensor on all five fingertips. The tactile sensors provide high-resolution information about a grasp and how the fingers interact with held objects. We first describe a series of hardware developments for performing asynchronous sensor data acquisition and processing, resulting in a fast control loop sufficient for real-time grasp control. We then develop a novel grasp controller that uses tactile feedback from all five fingertip sensors simultaneously to gently and stably grasp 43 objects of varying geometry and stiffness, which is then applied to a human-to-robot handover task. These developments open the door to more advanced manipulation with underactuated hands via fast reflexive control using high-resolution tactile sensing.

cs.RO↗

arXiv2022

BRL/Pisa/IIT SoftHand: A Low-cost, 3D-Printed, Underactuated, Tendon-Driven Hand with Soft and Adaptive Synergies

This paper introduces the BRL/Pisa/IIT (BPI) SoftHand: a single actuator-driven, low-cost, 3D-printed, tendon-driven, underactuated robot hand that can be used to perform a range of grasping tasks. Based on the adaptive synergies of the Pisa/IIT SoftHand, we design a new joint system and tendon routing to facilitate the inclusion of both soft and adaptive synergies, which helps us balance durability, affordability and grasping performance of the hand. The focus of this work is on the design, simulation, synergies and grasping tests of this SoftHand. The novel phalanges are designed and printed based on linkages, gear pairs and geometric restraint mechanisms, and can be applied to most tendon-driven robotic hands. We show that the robot hand can successfully grasp and lift various target objects and adapt to hold complex geometric shapes, reflecting the successful adoption of the soft and adaptive synergies. We intend to open-source the design of the hand so that it can be built cheaply on a home 3D-printer. For more detail: https://sites.google.com/view/bpi-softhandtactile-group-bri/brlpisaiit-softhand-design

cs.RO↗

arXiv2021

A Robust Controller for Stable 3D Pinching using Tactile Sensing

This paper proposes a controller for stable grasping of unknown-shaped objects by two robotic fingers with tactile fingertips. The grasp is stabilised by rolling the fingertips on the contact surface and applying a desired grasping force to reach an equilibrium state. The validation is both in simulation and on a fully-actuated robot hand (the Shadow Modular Grasper) fitted with custom-built optical tactile sensors (based on the BRL TacTip). The controller requires the orientations of the contact surfaces, which are estimated by regressing a deep convolutional neural network over the tactile images. Overall, the grasp system is demonstrated to achieve stable equilibrium poses on various objects ranging in shape and softness, with the system being robust to perturbations and measurement errors. This approach also has promise to extend beyond grasping to stable in-hand object manipulation with multiple fingers.

cs.RO↗