arXiv subjects

Elana Urbach

Publications and source records attributed to Elana Urbach.

7 recordsLinked to original sources

arXiv2026

Early Telescope Throughput Results from the Collimated Beam Projector at the Vera C. Rubin Observatory

The Vera C. Rubin Observatory LSST requires precise photometric calibration to meet its science goals, particularly for cosmological analyses based on Type Ia supernovae. The Collimated Beam Projector (CBP) has been developed to support this effort by projecting monochromatic point sources of known wavelength and flux directly into the telescope aperture, enabling direct in situ measurements of the full system throughput. We present initial results demonstrating the CBP capability to characterize the instrumental response of the Rubin Telescope and to measure the transmission profiles of LSSTCam broadband filters. In particular, the CBP enables spatially resolved mapping of filter bandpass edge shifts across the focal plane, which can vary by several nanometers as a function of the ray angle of incidence. These early results establish the CBP as a powerful photometric calibration tool and lay the groundwork for continuous throughput monitoring throughout LSST operations.

astro-ph.IM↗

arXiv2026

Laser-based metrology systems vs wavefront sensing techniques: a comparative overview between the Large Binocular Telescope and the Vera C. Rubin Observatory for the telescope alignment and collimation tracking

This work presents a comparative overview of the collimation and alignment strategies employed by two leading 8m-class facilities: the Large Binocular Telescope (LBT) and the Vera C. Rubin Observatory. While both telescopes share a challenging fast f-number of approximately f/1.2 (considering the LBT in its Prime Focus configuration), they have adopted reciprocal architectures for the initial optical alignment strategy and for maintaining collimation during the night. As an initial alignment strategy, the LBT relies on a Wavefront Sensing technique called Focal Plane Image Analysis. Conversely, the Vera C. Rubin Observatory baseline foresees the usage of a Laser Tracker system to establish the initial optical states. The strategies for preserving the optical alignment and maintaining the collimation against gravitational flexure and thermal drift during observations are instead reversed. Besides the use of open-loop corrections based on Look-Up Tables, common on both telescopes, the LBT utilizes a laser-based Telescope Metrology System to monitor the relative position of optics in real-time, applying the corrections between the exposures. In contrast, the Rubin Observatory employs a Curvature Wavefront Sensing technique, using dedicated detectors at the four corners of the focal plane. Rather than identifying a best strategy, this work aims to synthesize the strengths, limitations, and operational trade-offs of these complementary approaches, from the perspective of the next generation of Extremely Large Telescopes and their instruments.

astro-ph.IM↗

arXiv2026

An overview of stray light findings and interpretation during on-sky commissioning of LSSTCam

Wide-field telescopes are intrinsically difficult to shield from unwanted stray and scattered light, while the search to identify sources of contaminating light is frequently a challenging task. The Vera C.~Rubin Observatory, which achieved its first photon with the LSST Camera (LSSTCam) on April 15, 2025, will initiate a revolutionary era for the study of dark matter, dark energy, the transient sky, the Solar System, and the Milky Way. LSSTCam will provide near seeing-limited images of the sky in six bands ($u,g,r,i,z,y$) over a $3.^\circ 5$-diameter field of view, and over the course of a decade, it will execute the Legacy Survey of Space and Time (LSST). This work provides an overview of the dedicated stray and scattered light test campaign that has been undertaken since the start of Rubin commissioning. In particular, we highlight the processes used to characterize, model, and mitigate stray light present in LSSTCam images. The Rubin commissioning team created a series of testing and analysis tools to track stray light artifacts from their initial discovery through reproduction with timely observations, simulation using ray tracing to identify opto-mechanical origins, and finally devising corrective actions. The complex stray light features encountered by Rubin provide a wealth of experience for the future wide-field and extremely wide-field observatories. This work covers the many stages of a long journey that started with conceiving an innovative and challenging optical design, followed by the engineering and system engineering efforts to build it, to finally delivering an optimized and revolutionary cutting-edge facility.

astro-ph.IM↗

arXiv2024

StarDICE III: Characterization of the photometric instrument with a Collimated Beam Projector

The measurement of type Ia supernovae magnitudes provides cosmological distances, which can be used to constrain dark energy parameters. Large photometric surveys require a substantial improvement in the calibration precision of their photometry to reduce systematic uncertainties in cosmological constraints. The StarDICE experiment is designed to establish accurate broadband flux references for these surveys, aiming for sub-percent precision in magnitude measurements. This requires a precise measurement of the filter bandpasses of both the StarDICE and survey instruments with sub-nanometer accuracy. To that end, we have developed the Collimated Beam Projector (CBP), an optical device capable of calibrating the throughput of an astronomical telescope and of its filters. The CBP is built from a tunable laser source and a reversed telescope to emit a parallel monochromatic light beam that is continuously monitored in flux and wavelength. The CBP output light flux is measured using a large area photodiode, previously calibrated relative to a NIST photodiode. We derive the StarDICE telescope throughput and filter transmissions from the CBP measurements, anchoring it to the absolute calibration provided by the NIST. After analyzing the systematic uncertainties, we achieved sub-nanometer accuracy in determining filter central wavelengths, measured each filter transmission with a precision of 0.5% per 1nm bin, and detected out-of-band leakages at 0.01%. Furthermore, we have synthesized the equivalent transmission for full pupil illumination from four sample positions in the StarDICE telescope mirror, with an accuracy of approximately 0.2nm for central wavelengths and 7mmag for broadband fluxes. We demonstrated our ability to characterize a telescope throughput down to the mmag, and paved the way for future developments, such as a portable CBP version for in-situ transmission monitoring.

astro-ph.IM↗

arXiv2023

Directly Characterizing Dome Seeing: Differential Image Motion Sensor Using Multisources (DIMSUM)

Image degradation impedes our ability to extract information from astronomical observations. One factor contributing to this degradation is ``dome seeing", the reduction in image quality due to variations in the index of refraction within the observatory dome. Addressing this challenge, we introduce a novel setup-DIMSUM (Differential Image Motion Sensor Using Multisources)-which offers a simple installation and provides direct characterization of local index of refraction variations. This is achieved by measuring differential image motion using strobed imaging that effectively``freezes" the atmosphere, aligning our captured images with the timescale of thermal fluctuations, thereby giving a more accurate representation of dome seeing effects. Our apparatus has been situated within the Auxiliary Telescope of the Vera C. Rubin Observatory. Early results from our setup are encouraging. Not only do we observe a correlation between the characteristic differential image motion (DIM) values and local temperature fluctuations (a leading cause of variations in index of refraction), but also hint at the potential of DIM measures to characterize dome seeing with greater precision in subsequent tests. Our preliminary findings underscore the potential of DIMSUM as a powerful tool for enhancing image quality in ground-based astronomical observations. Further refinement and data collection will likely solidify its place as a useful component for managing dome seeing in major observatories like the Vera C. Rubin Observatory.

astro-ph.IM↗

arXiv2022

An Estimator for Lensing Potential from Galaxy Number Counts

We derive an estimator for the lensing potential from galaxy number counts which contains a linear and a quadratic term. We show that this estimator has a much larger signal-to-noise ratio than the corresponding estimator from intensity mapping. This is due to the additional lensing term in the number count angular power spectrum which is present already at linear order. We estimate the signal-to-noise ratio for future photometric surveys. Particularly at high redshifts, $z\gtrsim 1.5$, the signal to noise ratio can become of order 30. Therefore, the number counts in photometric surveys would be an excellent means to measure tomographic lensing spectra.

astro-ph.CO↗

arXiv2015

NMR Technique for Determining the Depth of Shallow Nitrogen-Vacancy Centers in Diamond

We demonstrate a robust experimental method for determining the depth of individual shallow Nitrogen-Vacancy (NV) centers in diamond with $\sim1$ nm uncertainty. We use a confocal microscope to observe single NV centers and detect the proton nuclear magnetic resonance (NMR) signal produced by objective immersion oil, which has well understood nuclear spin properties, on the diamond surface. We determine the NV center depth by analyzing the NV NMR data using a model that describes the interaction of a single NV center with the statistically-polarized proton spin bath. We repeat this procedure for a large number of individual, shallow NV centers and compare the resulting NV depths to the mean value expected from simulations of the ion implantation process used to create the NV centers, with reasonable agreement.

quant-ph↗