arXiv subjects

Eleonora Diociaiuti

Publications and source records attributed to Eleonora Diociaiuti.

9 recordsLinked to original sources

arXiv2024

The ECFA Early-Career Researchers Panel: Report for the year 2023

The European Committee for Future Accelerators (ECFA) Early-Career Researcher (ECR) panel, which represents the interests of the ECR community to ECFA, presents in this document its initiatives and activities in the year 2023. This report summarises the process of the first big turnover in the panel composition at the start of 2023 and reports on the activities of the active working groups - either pursued from before or newly established. The overarching goal of the ECFA-ECR panel is to better understand and support the diverse interests of early-career researchers in the ECFA community and beyond.

physics.acc-ph↗

arXiv2024

Results of the 2022 ECFA Early-Career Researchers Panel survey on career prospects and diversity

This document presents the outcomes of a comprehensive survey conducted among early career researchers (ECRs) in academic particle physics. Running from September 24, 2022, to March 3, 2023, the survey gathered responses from 759 ECRs employed in 39 countries. The study aimed to gain insights into the career prospects and experiences of ECRs while also delving into diversity and sociological aspects within particle physics research. The survey results are presented in a manner consistent with the survey choices. The document offers insights for the particle physics community, and provides a set of recommendations for enhancing career prospects, fostering diversity, and addressing sociological dimensions within this field.

physics.soc-ph↗

arXiv2024

The Mu2e crystal and SiPM calorimeter: construction status

The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilities and an online trigger filter while improving the track reconstruction, requiring better than 10% energy and 500 ps timing resolutions for 100 MeV electrons. In this paper, we present the status of construction and the Quality Control (QC) performed on the produced crystals and photosensors, the development of the rad-hard electronics, and the most important results of the irradiation tests. Construction of the mechanics is also reported. Status and plans for the calorimeter assembly and its first commissioning are described.

physics.ins-det↗

arXiv2024

True muonium resonant production at $e^+e^-$ colliders with standard crossing angle

True muonium ($μ^+μ^-$) is the heaviest and smallest bound state not involving quantum chromodynamics, after true tauonium ($τ^+τ^-$) and mu-tauonium ($μ^\pmτ^\mp$). Unlike atoms containing $τ$ particles, the muon lifetime is long enough to allow observation of true muonium (TM) decays and transitions. One of the proposed methods to observe the spin 1 fundamental state of TM, which has the smallest lifetime among TM spin 1 states, was to build an $e^+e^-$ collider with a large crossing angle ($θ\sim 30^\circ$) in order to provide TM with a large boost and detect its decay vertex in $e^+ e^-$. The following paper will instead show that TM excited states ($n\geq2$) can be observed in relatively large quantities ($\mathcal{O}$(10)/month) at a feasible $e^+e^-$ collider with standard crossing angles, after setting their center-of-mass energy to the TM mass ($\sim2m_μ=211.4$ MeV).

hep-ph↗

arXiv2023

Towards a Muon Collider

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.

physics.acc-ph↗

arXiv2022

The ECFA Early Career Researcher's Panel: composition, structure, and activities, 2021 -- 2022

The European Committee for Future Accelerators (ECFA) Early Career Researcher's (ECR) panel, which represents the interests of the ECR community to ECFA, officially began its activities in January 2021. In the first two years, the panel has defined its own internal structure, responded to ECFA requests for feedback, and launched its own initiatives to better understand and support the diverse interests of early career researchers. This report summarises the panel composition and structure, as well as the different activities the panel has been involved with during the first two years of its existence.

physics.acc-ph↗

arXiv2022

A Measurement of Proton, Deuteron, Triton and Alpha Particle Emission after Nuclear Muon Capture on Al, Si and Ti with the AlCap Experiment

Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture of muons stopped in Al, Si, and Ti in the low energy range relevant for the muon-to-electron conversion experiments. Individual charged particle types were identified in layered silicon detector packages and their initial energy distributions were unfolded from the observed energy spectra. Detailed information on yields and energy spectra for all observed nuclei are presented in the paper.

physics.ins-det↗

arXiv2021

Results of the 2021 ECFA Early-Career Researcher Survey on Training in Instrumentation

The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the European ECR community. A working group within the ECFA ECR panel held a Townhall Meeting to get first input, and then designed and broadly circulated a detailed survey to gather feedback from the larger ECR community. A total of 473 responses to this survey were received, providing a useful overview of the experiences of ECRs in instrumentation training and related topics. This report summarises the feedback received, and is intended to serve as an input to the ECFA Detector R&D Roadmap process.

physics.ins-det↗

arXiv2016

Radiation hardness test of un-doped CsI crystals and Silicon Photomultipliers for the Mu2e calorimeter

The Mu2e calorimeter is composed by 1400 un-doped CsI crystals coupled to large area UV extended Silicon Photomultipliers arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position. It should also be fast enough to handle the high rate background and it must operate and survive in a high radiation environment. Simulation studies estimated that, in the hottest regions, each crystal will absorb a dose of 300 Gy and will be exposed to a neutron fluency of 6 x 10^{11} n/cm^2 in 3 years of running. Test of un-doped CsI crystals irradiated up to 900 Gy and to a neutron fluency up to 9 x 10^{11} n/cm^2 have been performed at CALLIOPE and FNG ENEA facilities in Italy. We present our study on the variation of light yield (LY) and longitudinal response uniformity (LRU) of these crystals after irradiation. The ionization dose does not modify LRU while a 20% reduction in LY is observed at 900 Gy. Similarly, the neutron flux causes an acceptable LY deterioration (<15%). A neutron irradiation test on different types of SIPMs (two different array models from Hamamatsu and one from FBK) have also been carried out by measuring the variation of the leakage current and the charge response to an ultraviolet led. We concluded that, in the experiment, we will need to cool down the SIPMs to 0 C reduce the leakage current to an acceptable level.

physics.ins-det↗