Searcharxiv⌕ Search

arXiv subjects

Elham Heidari

Publications and source records attributed to Elham Heidari.

8 recordsLinked to original sources
arXiv2023

Towards Developing Mid-Infrared Photonics Using Mxenes

Recent research and development in the mid-infrared (IR) wavelength range (2-20 um) for a variety of applications, such as trace gas monitoring, thermal imaging, and free space communications have shown tremendous and fascinating progress. MXenes, which mainly refer to two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, have drawn a lot of interest since their first investigation in 2011. MXenes project enormous potential for use in optoelectronics, photonics, catalysis, and energy harvesting fields proven by extensive experimental and theoretical studies over a decade. MXenes offers a novel 2D nano platform for cutting-edge optoelectronics devices due to their interesting mechanical, optical, and electrical capabilities, along with their elemental and chemical composition. We here discuss the key developments of MXene emphasizing the evolution of material synthesis methods over time and the resulting device applications. Photonic and optoelectronic device design and fabrication for mid-IR photonics are demonstrated by integrating MXene materials with various electrical and photonic platforms. Here, we show the potential of using Mxene in photonics for mid-IR applications and a pathway toward achieving next-generation devices for various applications.

physics.optics↗
arXiv2023

An electrically-driven Carbon nanotube-based plasmonic laser on Silicon

Photonic signal processing requires efficient on-chip light sources with higher modulation bandwidths. Todays conventional fastest semiconductor diode lasers exhibit modulation speeds only on the order of a few tens of GHz due to gain compression effects and parasitic electrical capacitances. Here we theoretically show an electrically-driven Carbon nanotube (CNT)-based laser utilizing strong light-matter-interaction via monolithic integration into Silicon photonic crystal nanobeam (PCNB) cavities. The laser is formed by single-walled CNTs inside a combo-cavity consisting of both a plasmonic metal-oxide-semiconductor hybrid mode embedded in the one dimensional PCNB cavity. The emission originates from interband recombinations of electrostatically-doped nanotubes depending on the tubes chirality towards matching the C-band. Our simulation results show that the laser operates at telecom frequencies resulting in a power output > 3 (100) uW and > 100 (1000)GHz modulation speed at 1x (10x) threshold. Such monolithic integration schemes provide an alternative promising approach for light source in future photonics integrated circuits.

physics.optics↗
arXiv2022

Integrated ultra-high-performance graphene optical modulator

With the increasing need for large volumes of data processing, transport, and storage, optimizing the trade-off between high-speed and energy consumption in today's optoelectronic devices is getting increasingly difficult. Heterogeneous material integration into Silicon- and Nitride-based photonics has showed high-speed promise, albeit at the expense of millimeter- to centimeter-scale footprints. The hunt for an electro-optic modulator that combines high speed, energy efficiency, and compactness to support high component density on-chip continues. Using a double-layer graphene optical modulator integrated on a Silicon photonics platform, we are able to achieve 60 GHz speed (3 dB roll-off), micrometer compactness, and efficiency of 2.25 fJ/bit in this paper. The electro-optic response is boosted further by a vertical distributed-Bragg-reflector cavity, which reduces the driving voltage by about 40 times while maintaining a sufficient modulation depth (5.2 dB/V). Modulators that are small, efficient, and quick allow high photonic chip density and performance, which is critical for signal processing, sensor platforms, and analog- and neuromorphic photonic processors.

physics.optics↗
arXiv2021

On-chip Nanophotonic Broadband Wavelength Detector with 2D-Electron Gas

Miniaturized, low-cost wavelength detectors are gaining enormous interest as we step into the new age of photonics. Incompatibility with integrated circuits or complex fabrication requirement in most of the conventionally used filters necessitates the development of a simple, on-chip platform for easy-to-use wavelength detection system. Also, intensity fluctuations hinder precise, noise free detection of spectral information. Here we propose a novel approach of utilizing wavelength sensitive photocurrent across semiconductor heterojunctions to experimentally validate broadband wavelength detection on an on-chip platform with simple fabrication process. The proposed device utilizes linear frequency response of internal photoemission via 2-D electron gas in a ZnO based heterojunction along with a reference junction for coherent common mode rejection. We report sensitivity of 0.96 uA/nm for a broad wavelength-range of 280 nm from 660-940 nm. Simple fabrication process, efficient intensity noise cancelation along with heat resistance and radiation hardness of ZnO makes the proposed platform simple, low-cost and efficient alternative for several applications such as optical spectrometers, sensing and IOTs.

physics.optics↗
arXiv2020

Heterogeneously Integrated ITO Plasmonic Mach-Zehnder Interferometric Modulator on SOI

Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines the high group-index in hybrid plasmonic with nanoscale optical modes. Following this design paradigm, here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometric modulator, exhibiting a high efficiency signified by a miniscule VpL of 95 Vum, deploying an one-micrometer compact electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics. Furthermore we show, that this device paradigm enables spectrally broadband operation across the entire telecommunication near infrared C-band. Such sub-wavelength short efficient and fast modulators monolithically integrated into Silicon platform open up new possibilities for high-density photonic circuitry, which is critical for high interconnect density of photonic neural networks or applications in GHz-fast optical phased-arrays, for example.

physics.app-ph↗
arXiv2020

Extra Loss-free Non-Hermitian Engineered Single Mode Laser Systems

In a laser system non-Hermitian methods such as Parity-Time (PT) Symmetry and Supersymmetry (SUSY) have shown and demonstrated the ability to suppress unwanted lasing modes and, thus, achieved single mode lasing operation through the addition of lossy passive elements. While these approaches enable laser engineering versatility, they rely on the drawback of adding optical losses to a system tasked to produce single mode gain. Unlike PT and SUSY lasers, here we show an extra loss-free non-Hermitian laser engineering approach to realize single mode lasing operation for the first time. By selectively enhancing the fundamental modes quality factor, we obtain single mode operation with higher output power per cavity since all cavities in this system contribute to the laser output, in contrast to other non-Hermitian approaches. Furthermore, we show that this approach interestingly allows reducing the number of to-be-designed cavities in super-partner array as compared with, for example, the SUSY approach, thus leading to reduced design complexity upon coupled cavity scale up of laser arrays. In summary, the ability to engineer coupled laser systems where each laser cavity contributes to coherent light amplification opens up a new degree of laser-design freedom leading to increased device performance and simultaneous reduced design and fabrication complexity.

physics.optics↗
arXiv2020

Hexagonal Transverse Coupled Cavity VCSEL Redefining the High-Speed Lasers

The vertical-cavity surface-emitting lasers (VCSELs) have emerged as a vital approach for realizing energy efficient, high speed optical interconnects in the data center and supercomputers. As of today, VCSEL is the most suitable for mass production in terms of cost-effectiveness and reliability. However, there are still key challenges for higher speed modulation above 40 GHz. Here, a hexagonal transverse coupled cavity VCSEL adiabatically coupled through the center cavity is proposed. A 3-dB roll-off modulation bandwidth of 45 GHz is demonstrated, which is five times greater than a conventional VCSEL fabricated on the same epi-wafer structure. While a parity time (PT) symmetry approaches add loss to engineer the topological state of the laser system, here, a radical paradigm shift with gain introduces symmetry breaking. This idea, then enables a single mode operation with a side-mode suppression-ratio (SMSR) of > 30 decibels and signal-to-noise ratio (SNR) of > 45 decibels. The energy distribution inside the coupled cavity system is also redistributed to provide a coherent gain in a spatially separated system. Consequently, throughput power is three times higher than that of the conventional VCSEL.

physics.optics↗