SearcharxivSearch

arXiv subjects

Elian Neppel

Publications and source records attributed to Elian Neppel.

7 recordsLinked to original sources

Distributed Multi Robot Lunar Cargo Transportation via Phase Decomposed Reinforcement Learning

Modular reconfigurable robotic systems provide a scalable solution for cooperative surface operations in future lunar missions. However, cooperative cargo transportation remains challenging due to morphology-dependent topology changes, strong payload-induced coupling, long-horizon decision making, and safety constraints. This paper proposes a phase-decomposed reinforcement learning framework for cooperative cargo transport with distributed robotic units. The task is decomposed into lifting, transportation, and placement, each optimized with a dedicated joint-state policy capturing inter-agent coupling. Centralized training promotes stable convergence, while deployment uses onboard proprioception for control and OptiTrack motion capture for ground-truth evaluation and post-processed metrics. A deterministic phase controller expressed in Markov state representation regulates transitions between stages, and a failure-sensitive synchronization mechanism ensures coordinated progression and safety-aware halting during real-world execution. The framework is evaluated in simulation and through controlled field experiments at a JAXA space exploration test facility. Results demonstrate reliable cooperative transport across all stages in both simulation and hardware experiments.

cs.RO

Design and Development of Modular Limbs for Reconfigurable Robots on the Moon

In this paper, we present the development of 4-DOF robot limbs, which we call Moonbots, designed to connect in various configurations with each other and wheel modules, enabling adaptation to different environments and tasks. These modular components are intended primarily for robotic systems in space exploration and construction on the Moon in our Moonshot project. Such modular robots add flexibility and versatility for space missions where resources are constrained. Each module is driven by a common actuator characterized by a high torque-to-speed ratio, supporting both precise control and dynamic motion when required. This unified actuator design simplifies development and maintenance across the different module types. The paper describes the hardware implementation, the mechanical design of the modules, and the overall software architecture used to control and coordinate them. Additionally, we evaluate the control performance of the actuator under various load conditions to characterize its suitability for modular robot applications. To demonstrate the adaptability of the system, we introduce nine functional configurations assembled from the same set of modules: 4DOF-limb, 8DOF-limb, vehicle, dragon, minimal, quadruped, cargo, cargo-minimal, and bike. These configurations reflect different locomotion strategies and task-specific behaviors, offering a practical foundation for further research in reconfigurable robotic systems.

cs.RO

MoonBot: Modular and On-Demand Reconfigurable Robot Toward Moon Base Construction

The allure of lunar surface exploration and development has recently captured widespread global attention. Robots have proved to be indispensable for exploring uncharted terrains, uncovering and leveraging local resources, and facilitating the construction of future human habitats. In this article, we introduce the modular and on-demand reconfigurable robot (MoonBot), a modular and reconfigurable robotic system engineered to maximize functionality while operating within the stringent mass constraints of lunar payloads and adapting to varying environmental conditions and task requirements. This article details the design and development of MoonBot and presents a preliminary field demonstration that validates the proof of concept through the execution of milestone tasks simulating the establishment of lunar infrastructure. These tasks include essential civil engineering operations, infrastructural component transportation and deployment, and assistive operations with inflatable modules. Furthermore, we systematically summarize the lessons learned during testing, focusing on the connector design and providing valuable insights for the advancement of modular robotic systems in future lunar missions.

cs.RO

Designing for Distributed Heterogeneous Modularity: On Software Architecture and Deployment of MoonBots

This paper presents the software architecture and deployment strategy behind the MoonBot platform: a modular space robotic system composed of heterogeneous components distributed across multiple computers, networks and ultimately celestial bodies. We introduce a principled approach to distributed, heterogeneous modularity, extending modular robotics beyond physical reconfiguration to software, communication and orchestration. We detail the architecture of our system that integrates component-based design, a data-oriented communication model using ROS2 and Zenoh, and a deployment orchestrator capable of managing complex multi-module assemblies. These abstractions enable dynamic reconfiguration, decentralized control, and seamless collaboration between numerous operators and modules. At the heart of this system lies our open-source Motion Stack software, validated by months of field deployment with self-assembling robots, inter-robot cooperation, and remote operation. Our architecture tackles the significant hurdles of modular robotics by significantly reducing integration and maintenance overhead, while remaining scalable and robust. Although tested with space in mind, we propose generalizable patterns for designing robotic systems that must scale across time, hardware, teams and operational environments.

cs.RO

An Agnostic End-Effector Alignment Controller for Robust Assembly of Modular Space Robots

Modular robots offer reconfigurability and fault tolerance essential for lunar missions, but require controllers that adapt safely to real-world disturbances. We build on our previous hardware-agnostic actuator synchronization in Motion Stack to develop a new controller enforcing adaptive velocity bounds via a dynamic hypersphere clamp. Using only real-time end-effector and target pose measurements, the controller adjusts its translational and rotational speed limits to ensure smooth, stable alignment without abrupt motions. We implemented two variants, a discrete, step-based version and a continuous, velocity-based version, and tested them on two MoonBot limbs in JAXA's lunar environment simulator. Field trials demonstrate that the step-based variant produces highly predictable, low-wobble motions, while the continuous variant converges more quickly and maintains millimeter-level positional accuracy, and both remain robust across limbs with differing mechanical imperfections and sensing noise (e.g., backlash and flex). These results highlight the flexibility and robustness of our robot-agnostic framework for autonomous self-assembly and reconfiguration under harsh conditions.

cs.RO

Multi-Modal Decentralized Reinforcement Learning for Modular Reconfigurable Lunar Robots

Modular reconfigurable robots suit task-specific space operations, but the combinatorial growth of morphologies hinders unified control. We propose a decentralized reinforcement learning (Dec-RL) scheme where each module learns its own policy: wheel modules use Soft Actor-Critic (SAC) for locomotion and 7-DoF limbs use Proximal Policy Optimization (PPO) for steering and manipulation, enabling zero-shot generalization to unseen configurations. In simulation, the steering policy achieved a mean absolute error of 3.63{\deg} between desired and induced angles; the manipulation policy plateaued at 84.6 % success on a target-offset criterion; and the wheel policy cut average motor torque by 95.4 % relative to baseline while maintaining 99.6 % success. Lunar-analogue field tests validated zero-shot integration for autonomous locomotion, steering, and preliminary alignment for reconfiguration. The system transitioned smoothly among synchronous, parallel, and sequential modes for Policy Execution, without idle states or control conflicts, indicating a scalable, reusable, and robust approach for modular lunar robots.

cs.RO

Robust and Modular Multi-Limb Synchronization in Motion Stack for Space Robots with Trajectory Clamping via Hypersphere

Modular robotics holds immense potential for space exploration, where reliability, repairability, and reusability are critical for cost-effective missions. Coordination between heterogeneous units is paramount for precision tasks -- whether in manipulation, legged locomotion, or multi-robot interaction. Such modular systems introduce challenges far exceeding those in monolithic robot architectures. This study presents a robust method for synchronizing the trajectories of multiple heterogeneous actuators, adapting dynamically to system variations with minimal system knowledge. This design makes it inherently robot-agnostic, thus highly suited for modularity. To ensure smooth trajectory adherence, the multidimensional state is constrained within a hypersphere representing the allowable deviation. The distance metric can be adapted hence, depending on the task and system under control, deformation of the constraint region is possible. This approach is compatible with a wide range of robotic platforms and serves as a core interface for Motion-Stack, our new open-source universal framework for limb coordination (available at https://github.com/2lian/Motion-Stack ). The method is validated by synchronizing the end-effectors of six highly heterogeneous robotic limbs, evaluating both trajectory adherence and recovery from significant external disturbances.

cs.RO