arXiv subjects

Elizabeth J. Cross

Publications and source records attributed to Elizabeth J. Cross.

9 recordsLinked to original sources

arXiv2024

Meta-models for transfer learning in source localisation

In practice, non-destructive testing (NDT) procedures tend to consider experiments (and their respective models) as distinct, conducted in isolation and associated with independent data. In contrast, this work looks to capture the interdependencies between acoustic emission (AE) experiments (as meta-models) and then use the resulting functions to predict the model hyperparameters for previously unobserved systems. We utilise a Bayesian multilevel approach (similar to deep Gaussian Processes) where a higher level meta-model captures the inter-task relationships. Our key contribution is how knowledge of the experimental campaign can be encoded between tasks as well as within tasks. We present an example of AE time-of-arrival mapping for source localisation, to illustrate how multilevel models naturally lend themselves to representing aggregate systems in engineering. We constrain the meta-model based on domain knowledge, then use the inter-task functions for transfer learning, predicting hyperparameters for models of previously unobserved experiments (for a specific design).

stat.ML↗

arXiv2024

Active learning for regression in engineering populations: A risk-informed approach

Regression is a fundamental prediction task common in data-centric engineering applications that involves learning mappings between continuous variables. In many engineering applications (e.g.\ structural health monitoring), feature-label pairs used to learn such mappings are of limited availability which hinders the effectiveness of traditional supervised machine learning approaches. The current paper proposes a methodology for overcoming the issue of data scarcity by combining active learning with hierarchical Bayesian modelling. Active learning is an approach for preferentially acquiring feature-label pairs in a resource-efficient manner. In particular, the current work adopts a risk-informed approach that leverages contextual information associated with regression-based engineering decision-making tasks (e.g.\ inspection and maintenance). Hierarchical Bayesian modelling allow multiple related regression tasks to be learned over a population, capturing local and global effects. The information sharing facilitated by this modelling approach means that information acquired for one engineering system can improve predictive performance across the population. The proposed methodology is demonstrated using an experimental case study. Specifically, multiple regressions are performed over a population of machining tools, where the quantity of interest is the surface roughness of the workpieces. An inspection and maintenance decision process is defined using these regression tasks which is in turn used to construct the active-learning algorithm. The novel methodology proposed is benchmarked against an uninformed approach to label acquisition and independent modelling of the regression tasks. It is shown that the proposed approach has superior performance in terms of expected cost -- maintaining predictive performance while reducing the number of inspections required.

cs.LG↗

arXiv2024

Canonical-Correlation-Based Fast Feature Selection for Structural Health Monitoring

Feature selection refers to the process of selecting useful features for machine learning tasks, and it is also a key step for structural health monitoring (SHM). This paper proposes a fast feature selection algorithm by efficiently computing the sum of squared canonical correlation coefficients between monitored features and target variables of interest in greedy search. The proposed algorithm is applied to both synthetic and real datasets to illustrate its advantages in terms of computational speed, general classification and regression tasks, as well as damage-sensitive feature selection tasks. Furthermore, the performance of the proposed algorithm is evaluated under varying environmental conditions and on an edge computing device to investigate its applicability in real-world SHM scenarios. The results show that the proposed algorithm can successfully select useful features with extraordinarily fast computational speed, which implies that the proposed algorithm has great potential where features need to be selected and updated online frequently, or where devices have limited computing capability.

stat.ML↗

arXiv2023

Sharing Information Between Machine Tools to Improve Surface Finish Forecasting

At present, most surface-quality prediction methods can only perform single-task prediction which results in under-utilised datasets, repetitive work and increased experimental costs. To counter this, the authors propose a Bayesian hierarchical model to predict surface-roughness measurements for a turning machining process. The hierarchical model is compared to multiple independent Bayesian linear regression models to showcase the benefits of partial pooling in a machining setting with respect to prediction accuracy and uncertainty quantification.

cs.LG↗

arXiv2021

Probabilistic Inference for Structural Health Monitoring: New Modes of Learning from Data

In data-driven SHM, the signals recorded from systems in operation can be noisy and incomplete. Data corresponding to each of the operational, environmental, and damage states are rarely available a priori; furthermore, labelling to describe the measurements is often unavailable. In consequence, the algorithms used to implement SHM should be robust and adaptive, while accommodating for missing information in the training-data -- such that new information can be included if it becomes available. By reviewing novel techniques for statistical learning (introduced in previous work), it is argued that probabilistic algorithms offer a natural solution to the modelling of SHM data in practice. In three case-studies, probabilistic methods are adapted for applications to SHM signals -- including semi-supervised learning, active learning, and multi-task learning.

stat.ML↗

arXiv2021

Damage detection in operational wind turbine blades using a new approach based on machine learning

The application of reliable structural health monitoring (SHM) technologies to operational wind turbine blades is a challenging task, due to the uncertain nature of the environments they operate in. In this paper, a novel SHM methodology, which uses Gaussian Processes (GPs) is proposed. The methodology takes advantage of the fact that the blades on a turbine are nominally identical in structural properties and encounter the same environmental and operational variables (EOVs). The properties of interest are the first edgewise frequencies of the blades. The GPs are used to predict the edge frequencies of one blade given that of another, after these relationships between the pairs of blades have been learned when the blades are in a healthy state. In using this approach, the proposed SHM methodology is able to identify when the blades start behaving differently from one another over time. To validate the concept, the proposed SHM system is applied to real onshore wind turbine blade data, where some form of damage was known to have taken place. X-bar control chart analysis of the residual errors between the GP predictions and actual frequencies show that the system successfully identified early onset of damage as early as six months before it was identified and remedied.

cs.LG↗

arXiv2021

Structured Machine Learning Tools for Modelling Characteristics of Guided Waves

The use of ultrasonic guided waves to probe the materials/structures for damage continues to increase in popularity for non-destructive evaluation (NDE) and structural health monitoring (SHM). The use of high-frequency waves such as these offers an advantage over low-frequency methods from their ability to detect damage on a smaller scale. However, in order to assess damage in a structure, and implement any NDE or SHM tool, knowledge of the behaviour of a guided wave throughout the material/structure is important (especially when designing sensor placement for SHM systems). Determining this behaviour is extremely diffcult in complex materials, such as fibre-matrix composites, where unique phenomena such as continuous mode conversion takes place. This paper introduces a novel method for modelling the feature-space of guided waves in a composite material. This technique is based on a data-driven model, where prior physical knowledge can be used to create structured machine learning tools; where constraints are applied to provide said structure. The method shown makes use of Gaussian processes, a full Bayesian analysis tool, and in this paper it is shown how physical knowledge of the guided waves can be utilised in modelling using an ML tool. This paper shows that through careful consideration when applying machine learning techniques, more robust models can be generated which offer advantages such as extrapolation ability and physical interpretation.

stat.ML↗

arXiv2020

A Bayesian methodology for localising acoustic emission sources in complex structures

In the field of structural health monitoring (SHM), the acquisition of acoustic emissions to localise damage sources has emerged as a popular approach. Despite recent advances, the task of locating damage within composite materials and structures that contain non-trivial geometrical features, still poses a significant challenge. Within this paper, a Bayesian source localisation strategy that is robust to these complexities is presented. Under this new framework, a Gaussian process is first used to learn the relationship between source locations and the corresponding difference-in-time-of-arrival values for a number of sensor pairings. As an acoustic emission event with an unknown origin is observed, a mapping is then generated that quantifies the likelihood of the emission location across the surface of the structure. The new probabilistic mapping offers multiple benefits, leading to a localisation strategy that is more informative than deterministic predictions or single-point estimates with an associated confidence bound. The performance of the approach is investigated on a structure with numerous complex geometrical features and demonstrates a favourable performance in comparison to other similar localisation methods.

cs.LG↗

arXiv2020

On spike-and-slab priors for Bayesian equation discovery of nonlinear dynamical systems via sparse linear regression

This paper presents the use of spike-and-slab (SS) priors for discovering governing differential equations of motion of nonlinear structural dynamic systems. The problem of discovering governing equations is cast as that of selecting relevant variables from a predetermined dictionary of basis variables and solved via sparse Bayesian linear regression. The SS priors, which belong to a class of discrete-mixture priors and are known for their strong sparsifying (or shrinkage) properties, are employed to induce sparse solutions and select relevant variables. Three different variants of SS priors are explored for performing Bayesian equation discovery. As the posteriors with SS priors are analytically intractable, a Markov chain Monte Carlo (MCMC)-based Gibbs sampler is employed for drawing posterior samples of the model parameters; the posterior samples are used for variable selection and parameter estimation in equation discovery. The proposed algorithm has been applied to four systems of engineering interest, which include a baseline linear system, and systems with cubic stiffness, quadratic viscous damping, and Coulomb damping. The results demonstrate the effectiveness of the SS priors in identifying the presence and type of nonlinearity in the system. Additionally, comparisons with the Relevance Vector Machine (RVM) - that uses a Student's-t prior - indicate that the SS priors can achieve better model selection consistency, reduce false discoveries, and derive models that have superior predictive accuracy. Finally, the Silverbox experimental benchmark is used to validate the proposed methodology.

stat.ME↗