arXiv subjects

Elizabeth Skoropata

Publications and source records attributed to Elizabeth Skoropata.

26 records · Page 2Linked to original sources

arXiv2021

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators which can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single crystal (Mg0.2Ni0.2Fe0.2Co0.2Cu0.2)Fe2O4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Local and global magnetic measurements further demonstrate how strain can be used to manipulate magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next generation magnetic devices.

cond-mat.mtrl-sci↗

arXiv2020

Applying configurational complexity to the 2D Ruddlesden-Popper crystal structure

The 2D layered Ruddlesden-Popper crystal structure can host a broad range of functionally important behaviors. Here we establish extraordinary configurational disorder in a two dimensional layered Ruddlesden-Popper (RP) structure using entropy stabilization assisted synthesis. A protype A2CuO4 RP cuprate oxide with five components (La, Pr, Nd, Sm, Eu) on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. By comparing (La0.2Pr0.2Nd0.2Sm0.2Eu0.2)2CuO4 crystals grown under identical conditions but different substrates, it is found that heteroepitaxial strain plays an important role in crystal phase formation. When grown on a near lattice matched substrate, the high entropy oxide film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units, however, growing under strong compressive strain results in a single crystal non-RP cubic phase consistent with a CuX2O4 spinel structure. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. Designing configurational complexity and moving between 2D layered RP and 3D cubic crystal structures in this class of cuprate materials opens many opportunities for new design strategies related to magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

cond-mat.mtrl-sci↗

arXiv2020

Unexpected crystalline homogeneity from the disordered bond network in La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 films

Designing and understanding functional electronic and magnetic properties in perovskite oxides requires controlling and tuning the underlying crystal lattice. Here we report the structure, including oxygen and cation positions, of a single-crystal, entropy stabilized perovskite oxide film of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 grown on SrTiO3 (001). The parent materials range from orthorhombic (LaCrO3, LaMnO3 and LaFeO3) to rhombohedral (LaCoO3 and LaNiO3), and first principles calculations indicate that these structural motifs are nearly degenerate in energy and should be highly distorted site-to-site. Despite this extraordinary local configurational disorder on the B-site sublattice, we find a structure with unexpected macroscopic crystalline homogeneity with a clear orthorhombic unit cell, whose orientation is demonstrated to be controlled by the strain and crystal structure of the substrate for films grown on (La0.3Sr0.7)(Al0.65Ta0.35)O3 (LSAT) and NdGaO3 (110). Furthermore, quantification of the atom positions within the unit cell reveal that the orthorhombic distortions are small, close to LaCrO3, which may be driven by a combination of disorder averaging and the average ionic radii. This is the first step towards understanding the rules for designing new crystal motifs and tuning functional properties through controlled configurational complexity.

cond-mat.mtrl-sci↗

arXiv2020

Pulsed-laser epitaxy of metallic delafossite PdCrO$_2$ films

Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material may enable not only tuning the basic physical properties beyond what bulk materials can exhibit, but also developing novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinities, the direct growth of epitaxial PdCrO2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities between the substrates and volatile nature of PdO layer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO2 buffer layers before PdCrO2 were grown. Unlike PdCrO2, CuCrO2 films were rather readily grown with a relatively wide growth window. Only monolayer thick buffer layer was sufficient to grow the correct PdCrO2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness.

physics.app-ph↗

arXiv2019

Magnetic anisotropy in single crystal high entropy perovskite oxide La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 films

Local configurational disorder can have a dominating role in the formation of macroscopic functional responses in strongly correlated materials. Here, we use entropy-stabilization synthesis to create single crystal epitaxial ABO3 perovskite thin films with equal atomic concentration of 3d transition metal cations on the B-site sublattice. X-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 (L5BO) films demonstrate excellent crystallinity, smooth film surfaces, and uniform mixing of the 3d transition metal cations throughout the B-site sublattice. The magnetic properties are strongly dependent on substrate-induced lattice anisotropy and suggest the presence of long-range magnetic order in these exceptionally disordered materials. The ability to populate multiple elements onto a single sublattice in complex crystal structures opens new possibilities to design functionality in correlated systems and enable novel fundamental studies seeking to understand how diverse local bonding environments can work to generate macroscopic responses, such as those driven by electron-phonon channels and complex exchange interaction pathways.

cond-mat.str-el↗

arXiv2019

Competing Phases in Epitaxial Vanadium Dioxide at Nanoscale

Phase competition in correlated oxides offers tantalizing opportunities as many intriguing physical phenomena occur near the phase transitions. Owing to a sharp metal-insulator transition (MIT) near room temperature, correlated vanadium dioxide (VO2) exhibits a strong competition between insulating and metallic phases that is important for practical applications. However, the phase boundary undergoes strong modification when strain is involved, yielding complex phase transitions. Here, we report the emergence of the nanoscale M2 phase domains in VO2 epitaxial films under anisotropic strain relaxation. The phase states of the films are imaged by multi-length-scale probes, detecting the structural and electrical properties in individual local domains. Competing evolution of the M1 and M2 phases indicates a critical role of lattice-strain on both the stability of the M2 Mott phase and the energetics of the MIT in VO2 films. This study demonstrates how strain engineering can be utilized to design phase states, which allow deliberate control of MIT behavior at the nanoscale in epitaxial VO2 films.

cond-mat.str-el↗

arXiv2018

Room-temperature ferromagnetic insulating state in highly cation-ordered epitaxial oxide double perovskite

Ferromagnetic insulators (FMIs) are one of the most important components in developing dissipationless electronic and spintronic devices. However, since ferromagnetism generally accompanies metallicity, FMIs are innately rare to find in nature. Here, novel room-temperature FMI films are epitaxially synthesized by deliberate control of the ratio of two B-site cations in the double perovskite Sr2FeReO6. In contrast to the known ferromagnetic metallic phase in stoichiometric Sr2FeReO6, a FMI state with a high Curie temperature (Tc~400 K) and a large saturation magnetization (MS~1.8 μB/f.u.) is found in highly cation-ordered Fe-rich phases. The stabilization of the FMI state is attributed to the formation of extra Fe3+-Fe3+ and Fe3+-Re6+ bonding states, which originate from the excess Fe. The emerging FMI state by controlling cations in the epitaxial oxide perovskites opens the door to developing novel oxide quantum materials & heterostructures.

cond-mat.mtrl-sci↗

arXiv2016

Incommensurate crystal supercell and polarization-flop observed in the magnetoelectric ilmenite, MnTiO3

MnTiO3 has been studied for many decades, but it was only in the last few years that its strong magnetoelectric behavior had been observed. Here, we use neutron scattering on two separately grown single crystals and two powder samples to show the presence of a supercell that breaks R-3 symmetry. We also present the temperature and field dependence of the dielectric constant and pyroelectric current, and show evidence of non-zero off-diagonal magnetoelectric tensor elements (forbidden by R-3 symmetry) followed by a polarization flop accompanying the spin flop transition at μ0HSF = 6.5 T. Mössbauer spectroscopy on MnTiO3 gently doped with 57Fe was used to help shed light on the impact of the supercell on the observed behavior. Although the full supercell structure could not be solved at this time due to a lack of visible reflections, the full-scope of the results presented here suggest that the role of local spin-lattice coupling in the magnetoelectric properties of MnTiO3 is likely more important than previously thought.

cond-mat.mtrl-sci↗