arXiv subjects

Elvira Paz

Publications and source records attributed to Elvira Paz.

5 recordsLinked to original sources

arXiv2026

Exploring Multifunctionality in MgO-Based Magnetic Tunnel Junctions with Coexisting Magnetoresistance and Memristive Properties

Magnetic tunnel junctions (MTJs) and memristors are two key emerging nanotechnologies that attracted significant interest for potential applications at the forefront of the digital revolution, including sensing, data storage, and non-conventional computation. The co-integration of these phenomena into a single multifunctional device is an important step toward harnessing the re-programmability of memristive systems with the high yield and varied functionality of MTJs. This study demonstrates the co-existence of magnetoresistance and memristive properties on MgO-based MTJs. These devices show a magnetoresistance with a linear response as a function of a magnetic field and no hysteresis, which are the requirements for good magnetic field sensors, as well as demonstrating a non-volatile and quasi-analogue memristive behavior as a function of an applied electrical field down to nanosecond pulses. Furthermore, by doping the oxide barrier, the memristive power consumption is lowered by 20% giving the multi-functionality of the devices a promising scalability potential. This study also shows that, memristive switching can be reversibly used to completely suppress and recover the spintronic functionalities. These results can pave the way for a seamless co-integration of memristors and spintronic devices in complex reprogrammable circuits addressing applications such as reprogrammable multifunctional field sensor arrays and neuromorphic computing.

cond-mat.mtrl-sci↗

arXiv2024

Non-Volatile Analog Control and Reconfiguration of a Vortex Nano-Oscillator Frequency

Magnetic tunnel junctions are nanoscale devices which have recently attracted interested in the context of frequency multiplexed spintronic neural networks, due to their interesting dynamical properties, which are defined during the fabrication process, and depend on the material parameters and geometry. This paper proposes an approach to extending the functionality of a standard magnetic tunnel junction (MTJ) by introducing an additional ferromagnet/antiferromagnet (FM/AFM) storage layer (SL) vertically integrated with the standard Vortex MTJ stack into the nanopillar. The magnetostatic field created by this storage layer acts on the free layer and can be used to change its static and dynamic properties. To tune the magnitude and direction of this magnetostatic field, magnetic reconfiguration is carried out through a thermally assisted switching mechanism using a voltage pulse that heats the AFM layer in the SL above the Neel temperature in the presence of an external field. It is experimentally shown that using an MTJ based on a 600 nm diameter nanopillar with a vortex in the free layer, reconfiguration of the SL allows to continuously change the core precession frequency in the 15 MHz range. The reconfigurable analogue storage layer locally affects both the static and dynamic properties of the MTJ free layer, demonstrating vertical 3D integration of additional functionalities into a single MTJ nanopillar.

physics.app-ph↗

arXiv2023

Enhancing Spin Transfer Torque in Magnetic Tunnel Junction Devices: Exploring the Influence of Capping Layer Materials and Thickness on Device Characteristics

We have developed and optimized two categories of spin transfer torque magnetic tunnel junctions (STT-MTJs) that exhibit a high tunnel magnetoresistance (TMR) ratio, low critical current, high outputpower in the micro watt range, and auto-oscillation behavior. These characteristics demonstrate the potential of STT-MTJs for low-power, high-speed, and reliable spintronic applications, including magnetic memory, logic, and signal processing. The only distinguishing factor between the two categories, denoted as A-MTJs and B-MTJs, is the composition of their free layers, 2 CoFeB/0.21 Ta/6 CoFeSiB for A-MTJs and 2 CoFeB/0.21 Ta/7 NiFe for B-MTJs. Our study reveals that B-MTJs exhibit lower critical currents for auto-oscillation than A-MTJs. We found that both stacks have comparable saturation magnetization and anisotropy field, suggesting that the difference in auto-oscillation behavior is due to the higher damping of A-MTJs compared to B-MTJs. To verify this hypothesis, we employed the all-optical time-resolved magneto-optical Kerr effect (TRMOKE) technique, which confirmed that STT-MTJs with lower damping exhibited auto-oscillation at lower critical current values. Additionally, our study aimed to optimize the STT-MTJ performance by investigating the impact of the capping layer on the device's response to electronic and optical stimuli.

physics.optics↗

arXiv2023

The impact of local pinning sites in magnetic tunnel junctions with non-homogeneous free layers

Pinning at local defects is a significant road block for the successful implementation of technological paradigms which rely on the dynamic properties of non-trivial magnetic textures. In this report a comprehensive study of the influence of local pinning sites for non-homogeneous magnetic layers integrated as the free layer of a magnetic tunnel junction is presented, both experimentally and with corresponding micromagnetic simulations. The pinning sites are found to be extremely detrimental to the frequency controllability of the devices, a key requirement for their use as synapses in a frequency multiplexed artificial neural networks. In addition to describing the impact of the local pinning sites in the more conventional NiFe, a vortex-based magnetic tunnel junction with an amorphous free layer is presented which shows significantly improved frequency selectivity, marking a clear direction for the design of future low power devices.

cond-mat.mes-hall↗

arXiv2014

Towards wafer scale inductive characterization of spin transfer torque critical current density of magnetic tunnel junction stacks

We explore the prospects of wafer scale inductive probing of the critical current density $j^{c0}$ for spin transfer torque switching of a CoFeB/MgO/CoFeB magnetic tunnel junction with varying MgO thickness. From inductive measurements magnetostatic parameters and the effective damping are derived and $j^{c0}$ is calculated based on spin transfer torque equations. The inductive values compare well to the values derived from current induced switching measurements on individual nanopillars. Using a wafer scale inductive probe head could in the future enable wafer probe station based metrology of $j^{c0}$.

cond-mat.mtrl-sci↗