arXiv subjects

Ema Smith

Publications and source records attributed to Ema Smith.

8 recordsLinked to original sources

arXiv2025

CCAT: Design, Implementation, and Testing of a System to Read Out over 10,000 280 GHz KIDs using RFSoC Electronics

Over the past decade, kinetic inductance detectors (KIDs) have emerged as a viable superconducting technology for astrophysics at millimeter and submillimeter wavelengths. KIDs spanning 210 - 850 GHz across seven instrument modules will be deployed in the Prime-Cam instrument of CCAT Observatory's Fred Young Submillimeter Telescope at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. The natural frequency-division multiplexed readout of KIDs allows hundreds of detectors to be coupled to a single radio frequency (RF) transmission line, but requires sophisticated warm readout electronics. The FPGA-based Xilinx ZCU111 radio frequency system on chip (RFSoC) offers a promising and flexible solution to the challenge of warm readout. CCAT uses custom packaged RFSoCs to read out KIDs in the Prime-Cam instrument. Each RFSoC can simultaneously read out four RF channels with up to 1,000 detectors spanning a 512 MHz bandwidth per channel using the current firmware. We use five RFSoCs to read out the >10,000 KIDs in the broadband 280 GHz instrument module. Here, we describe and demonstrate the readout hardware, software and pipeline for the RFSoC system. We present a detector position map of the 280 GHz module focal plane and preliminary averaged spectral responses of a small subset of detectors from the TiN and first Al arrays. These measurements demonstrate our ability to simultaneously readout thousands of detectors, validate the end-to-end performance of the readout and optical systems, and represent a critical step toward reading out the ~100,000 KIDs in Prime-Cam in its future full capacity configuration.

astro-ph.IM↗

arXiv2025

CCAT: Mod-Cam Cryogenic Performance and its Impact on 280 GHz KID Array Noise

The CCAT Observatory's Fred Young Submillimeter Telescope (FYST) is designed to observe submillimeter astronomical signals with high precision, using receivers fielding state-of-the-art kinetic inductance detector (KID) arrays. Mod-Cam, a first-light instrument for FYST, serves as a testbed for instrument module characterization, including detailed evaluation of thermal behavior under operating conditions prior to deploying modules in the larger Prime-Cam instrument. Prime-Cam is a first generation multi-band, wide-field camera for FYST, designed to field up to seven instrument modules and provide unprecedented sensitivity across a broad frequency range. We present results from two key laboratory characterizations: an "optically open" cooldown to validate the overall thermal performance of the cryostat, and a "cold load" cooldown to measure the effect of focal plane temperature stability on detector noise. During the optically open test, we achieved stable base temperatures of 1.5 K on the 1 K stage and 85 mK at the detector stage. In the cold load configuration, we measured a detector focal plane RMS temperature stability of 3.2e-5 K. From this stability measurement, we demonstrate that the equivalent power from focal plane thermal fluctuations is only 0.0040% of a 5pW incident photon power for aluminum detectors and 0.0023% for titanium-nitride detectors, a negligible level for CCAT science goals. This highlights the success of the cryogenic system design and thermal management.

astro-ph.IM↗

arXiv2024

CCAT: LED Mapping and Characterization of the 280 GHz TiN KID Array

Prime-Cam, one of the primary instruments for the Fred Young Submillimeter Telescope (FYST) developed by the CCAT Collaboration, will house up to seven instrument modules, with the first operating at 280 GHz. Each module will include three arrays of superconducting microwave kinetic inductance detectors (KIDs). The first KID array fabricated for the 280 GHz module uses titanium-nitride (TiN) as the superconducting material and has 3,456 individual detectors, while the other two arrays use aluminum. This paper presents the design and laboratory characterization of the 280 GHz TiN array, which is cooled below its critical temperature to ~0.1 K and read out over six RF feedlines. LED mapping, a technique for matching the measured resonant frequency of a detector to its physical position, was performed on the array so that the results can be used to lithographically trim the KID capacitors and increase the yield of the array by reducing frequency collisions. We present the methods and results of LED mapping the 280 GHz TiN KID array before deployment on FYST.

astro-ph.IM↗

arXiv2024

CCAT: Nonlinear effects in 280 GHz aluminum kinetic inductance detectors

Prime-Cam, a first-generation science instrument for the Atacama-based Fred Young Submillimeter Telescope, is being built by the CCAT Collaboration to observe at millimeter and submillimeter wavelengths using kinetic inductance detectors (KIDs). Prime-Cam's 280 GHz instrument module will deploy with two aluminum-based KID arrays and one titanium nitride-based KID array, totaling approximately 10,000 detectors at the focal plane, all of which have been fabricated and are currently undergoing testing. One complication of fielding large arrays of KIDs under dynamic loading conditions is tuning the detector tone powers to maximize signal-to-noise while avoiding bifurcation due to the nonlinear kinetic inductance. For aluminum-based KIDs, this is further complicated by additional nonlinear effects which couple tone power to resonator quality factors and resonant frequencies. While both nonequilibrium quasiparticle dynamics and two-level system fluctuations have been shown to give rise to qualitatively similar distortions, modeling these effects alongside nonlinear kinetic inductance is inefficient when fitting thousands of resonators on-sky with existing models. For this reason, it is necessary to have a detailed understanding of the nonlinear effects across relevant detector loading conditions, including how they impact on on-sky noise and how to diagnose the detector's relative performance. We present a study of the competing nonlinearities seen in Prime-Cam's 280 GHz aluminum KIDs, with a particular emphasis on the resulting distortions to the resonator line shape and how these impact detector parameter estimation.

astro-ph.IM↗

arXiv2024

CCAT: Prime-Cam Optics Overview and Status Update

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST). FYST's crossed-Dragone design provides high optical throughput to take advantage of its unique site at 5600 m on Cerro Chajnantor in Chile's Atacama Desert to reach mapping speeds over ten times greater than current and near-term submillimeter experiments. Housing up to seven independent instrument modules in its 1.8-meter diameter cryostat, Prime-Cam will combine broadband polarization-sensitive modules and spectrometer modules designed for observations in several frequency windows between 210 GHz and 850 GHz to study a wide range of astrophysical questions from Big Bang cosmology to the formation of stars and galaxies in the Epoch of Reionization and beyond. In order to cover this range of frequencies and observation modes, each of the modules contains a set of cold reimaging optics that is optimized for the science goals of that module. These optical setups include several filters, three or four anti-reflection-coated silicon lenses, and a Lyot stop to control the field of view and illumination of the primary mirror, satisfy a series of mechanical constraints, and maximize optical performance within each passband. We summarize the design considerations and trade-offs for the optics in these modules and provide a status update on the fabrication of the Prime-Cam receiver and the design of its 1 K and 100 mK thermal BUSs.

astro-ph.IM↗

arXiv2024

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.

astro-ph.IM↗

arXiv2023

Rethinking SO(3)-equivariance with Bilinear Tensor Networks

Many datasets in scientific and engineering applications are comprised of objects which have specific geometric structure. A common example is data which inhabits a representation of the group SO$(3)$ of 3D rotations: scalars, vectors, tensors, \textit{etc}. One way for a neural network to exploit prior knowledge of this structure is to enforce SO$(3)$-equivariance throughout its layers, and several such architectures have been proposed. While general methods for handling arbitrary SO$(3)$ representations exist, they computationally intensive and complicated to implement. We show that by judicious symmetry breaking, we can efficiently increase the expressiveness of a network operating only on vector and order-2 tensor representations of SO$(2)$. We demonstrate the method on an important problem from High Energy Physics known as \textit{b-tagging}, where particle jets originating from b-meson decays must be discriminated from an overwhelming QCD background. In this task, we find that augmenting a standard architecture with our method results in a \ensuremath{2.3\times} improvement in rejection score.

cs.LG↗

arXiv2022

Antenna characterization for the HIRAX experiment

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) aims to improve constraints on the dark energy equation of state through measurements of large-scale structure at high redshift ($0.8 $700MHz. Noise temperature measurements of the HIRAX feeds were performed in a custom apparatus built at Yale. In this system, identical loads, one cryogenic and the other at room temperature, are used to take a differential (Y-factor) measurement from which the noise of the system is inferred. Several measurement sets have been conducted using the system, involving CHIME feeds as well as four of the HIRAX active feeds. These measurements give the first noise temperature measurements of the HIRAX feed, revealing a $\sim$60K noise temperature (relative to 30K target) with 40K peak- to-peak frequency-dependent features, and provide the first demonstration of feed repeatability. Both findings inform current and future feed designs.

astro-ph.IM↗