arXiv subjects

Emerson Sie

Publications and source records attributed to Emerson Sie.

6 recordsLinked to original sources

arXiv2026

StarLoc: Pinpointing Transmitting LEO Satellites from a Single Passive Array

This paper focuses on 3D localization of transmitting satellites in low Earth orbits (LEO). 3D localization of transmitters in low orbits is an important emerging problem for many applications such as spectrum management, orbit determination, and backup for GPS failures in orbit. We present StarLoc -- a system to geolocate transmitters in space using a combination of orbital modeling and a new interferometric 3D angle-of-arrival estimation technique. StarLoc's design relies on a unique insight -- the motion of satellites is governed by orbital dynamics and is therefore along a 2D manifold in a 3D space. This reduces the degrees of freedom in satellite motion and allows us to 3D-locate and track a satellite with just three antennas in a 2D plane. We evaluate the system using signal transmissions from 81 Starlink satellites. Our results show that StarLoc can estimate the 3D-angle of a satellite within 0.7 degrees and the orbital range within 5 km. Our dataset and implementation are available at: https://connectedsystemslab.github.io/starloc.

cs.NI↗

arXiv2025

Crowdsourcing Ubiquitous Indoor Localization with Non-Cooperative Wi-Fi Ranging

Indoor localization opens the path to potentially transformative applications. Although many indoor localization methods have been proposed over the years, they remain too impractical for widespread deployment in the real world. In this paper, we introduce PeepLoc, a deployable and scalable Wi-Fi-based solution for indoor localization that relies only on pre-existing devices and infrastructure. Specifically, PeepLoc works on any mobile device with an unmodified Wi-Fi transceiver and in any indoor environment with a sufficient number of Wi-Fi access points (APs) and pedestrian traffic. At the core of PeepLoc is (a) a mechanism which allows any Wi-Fi device to obtain non-cooperative time-of-flight (ToF) to any Wi-Fi AP and (b) a novel bootstrapping mechanism that relies on pedestrian dead reckoning (PDR) and crowdsourcing to opportunistically initialize pre-existing APs as anchor points within an environment. We implement PeepLoc using commodity hardware and evaluate it extensively across 4 campus buildings. We show PeepLoc leads to a mean and median positional error of 3.41 m and 3.06 m respectively, which is superior to existing deployed indoor localization systems and is competitive with commodity GPS in outdoor environments.

cs.HC↗

arXiv2025

BYON: Bring Your Own Networks for Digital Agriculture Applications

Digital agriculture technologies rely on sensors, drones, robots, and autonomous farm equipment to improve farm yields and incorporate sustainability practices. However, the adoption of such technologies is severely limited by the lack of broadband connectivity in rural areas. We argue that farming applications do not require permanent always-on connectivity. Instead, farming activity and digital agriculture applications follow seasonal rhythms of agriculture. Therefore, the need for connectivity is highly localized in time and space. We introduce BYON, a new connectivity model for high bandwidth agricultural applications that relies on emerging connectivity solutions like citizens broadband radio service (CBRS) and satellite networks. BYON creates an agile connectivity solution that can be moved along a farm to create spatio-temporal connectivity bubbles. BYON incorporates a new gateway design that reacts to the presence of crops and optimizes coverage in agricultural settings. We evaluate BYON in a production farm and demonstrate its benefits.

cs.NI↗

arXiv2024

Radarize: Enhancing Radar SLAM with Generalizable Doppler-Based Odometry

Millimeter-wave (mmWave) radar is increasingly being considered as an alternative to optical sensors for robotic primitives like simultaneous localization and mapping (SLAM). While mmWave radar overcomes some limitations of optical sensors, such as occlusions, poor lighting conditions, and privacy concerns, it also faces unique challenges, such as missed obstacles due to specular reflections or fake objects due to multipath. To address these challenges, we propose Radarize, a self-contained SLAM pipeline that uses only a commodity single-chip mmWave radar. Our radar-native approach uses techniques such as Doppler shift-based odometry and multipath artifact suppression to improve performance. We evaluate our method on a large dataset of 146 trajectories spanning 4 buildings and mounted on 3 different platforms, totaling approximately 4.7 Km of travel distance. Our results show that our method outperforms state-of-the-art radar and radar-inertial approaches by approximately 5x in terms of odometry and 8x in terms of end-to-end SLAM, as measured by absolute trajectory error (ATE), without the need for additional sensors such as IMUs or wheel encoders.

cs.RO↗

arXiv2023

BatMobility: Towards Flying Without Seeing for Autonomous Drones

Unmanned aerial vehicles (UAVs) rely on optical sensors such as cameras and lidar for autonomous operation. However, such optical sensors are error-prone in bad lighting, inclement weather conditions including fog and smoke, and around textureless or transparent surfaces. In this paper, we ask: is it possible to fly UAVs without relying on optical sensors, i.e., can UAVs fly without seeing? We present BatMobility, a lightweight mmWave radar-only perception system for UAVs that eliminates the need for optical sensors. BatMobility enables two core functionalities for UAVs -- radio flow estimation (a novel FMCW radar-based alternative for optical flow based on surface-parallel doppler shift) and radar-based collision avoidance. We build BatMobility using commodity sensors and deploy it as a real-time system on a small off-the-shelf quadcopter running an unmodified flight controller. Our evaluation shows that BatMobility achieves comparable or better performance than commercial-grade optical sensors across a wide range of scenarios.

cs.RO↗

arXiv2022

RF-Annotate: Automatic RF-Supervised Image Annotation of Common Objects in Context

Wireless tags are increasingly used to track and identify common items of interest such as retail goods, food, medicine, clothing, books, documents, keys, equipment, and more. At the same time, there is a need for labelled visual data featuring such items for the purpose of training object detection and recognition models for robots operating in homes, warehouses, stores, libraries, pharmacies, and so on. In this paper, we ask: can we leverage the tracking and identification capabilities of such tags as a basis for a large-scale automatic image annotation system for robotic perception tasks? We present RF-Annotate, a pipeline for autonomous pixel-wise image annotation which enables robots to collect labelled visual data of objects of interest as they encounter them within their environment. Our pipeline uses unmodified commodity RFID readers and RGB-D cameras, and exploits arbitrary small-scale motions afforded by mobile robotic platforms to spatially map RFIDs to corresponding objects in the scene. Our only assumption is that the objects of interest within the environment are pre-tagged with inexpensive battery-free RFIDs costing 3-15 cents each. We demonstrate the efficacy of our pipeline on several RGB-D sequences of tabletop scenes featuring common objects in a variety of indoor environments.

cs.RO↗