arXiv subjects

Emiliano Diolaiti

Publications and source records attributed to Emiliano Diolaiti.

13 recordsLinked to original sources

arXiv2026

SAXO+, the second-stage adaptive optics for SPHERE: NCPA compensation and dark-hole loop with a pyramid wavefront sensor

The SAXO+ upgrade of the VLT/SPHERE adaptive optics system introduces a second-stage near-infrared pyramid wavefront sensor to improve high-contrast imaging, making accurate calibration of non-common path aberrations (NCPAs) essential to fully exploit its performance. This work refines the expected level of NCPAs in SAXO+ and presents the calibration procedures developed for static NCPA compensation and focal-plane dark-hole control. Monte Carlo simulations based on an updated Zemax optical model were used to estimate the NCPA error budget. These simulations are in good agreement with previous measurements on SPHERE and with the assumptions adopted in earlier performance studies. We also propose a calibration strategy that offloads most static aberration correction to the first-stage deformable mirror while preserving the second-stage mirror stroke for high-speed adaptive optics correction. These results validate the expected SAXO+ optical quality and establish the calibration framework required for efficient NCPA compensation and focal-plane wavefront control during future on-sky operations.

astro-ph.IM↗

arXiv2024

Upgrading SPHERE with the second stage AO system SAXO+: frequency-based data-driven controller for adaptive optics

This study introduces a novel frequency-based data-driven controller for adaptive optics, using power spectral density for optimization while ensuring stability criteria. It addresses disturbance rejection, command amplitude constraints and system transfer functions through convex optimization to obtain an optimal control in an infinite input response filter form. Evaluated within the SAXO+ project, it demonstrates efficacy under diverse atmospheric conditions and operational scenarios. The proposed controller is tested in both standard and disentangled adaptive optics schemes, showcasing its adaptability and performance. Experimental validation is conducted using the COMPASS simulation tool, affirming the controller's promise for enhancing adaptive optics systems in real-world applications.

eess.SY↗

arXiv2019

Simulating the optical alignment of the multiconjugate adaptive optics module for the extremely large telescope

Adaptive optics (AO) instruments for the future extremely large telescopes (ELTs) are characterized by advanced optical systems with diffraction-limited optical quality. Low geometric distortion is also crucial for high accuracy astrometric applications. Optical alignment of such systems is a crucial step of the instrument integration. Due to relative inaccessibility of these giant instruments, automatic alignment methods are also favored to improve the instrument availability after major events, such as extraordinary maintenance. The proposed alignment concept for these systems is described: the notable example which is analyzed here is the case of the multiconjugate AO relay for the future ELT. The results of ray-tracing simulations carried out to validate the method are discussed in detail, covering the error sources, which could degrade the alignment performance.

astro-ph.IM↗

arXiv2019

Historic evolution of the optical design of the Multi Conjugate Adaptive Optics Relay for the Extremely Large Telescope

The optical design of the Multi Conjugate Adaptive Optics Relay for the Extremely Large Telescope experienced many modifications since Phase A conclusion in late 2009. These modifications were due to the evolution of the telescope design, the more and more accurate results of the performance simulations and the variations of the opto-mechanical interfaces with both the telescope and the client instruments. Besides, in light of the optics manufacturing assessment feed-backs, the optical design underwent to a global simplification respect to the former versions. Integration, alignment, accessibility and maintenance issues took also a crucial role in the design tuning during the last phases of its evolution. This paper intends to describe the most important steps in the evolution of the optical design, whose rationale has always been to have a feasible and robust instrument, fulfilling all the requirements and interfaces. Among the wide exploration of possible solutions, all the presented designs are compliant with the high-level scientific requirements, concerning the maximum residual wavefront error and the geometrical distortion at the exit ports. The outcome of this decennial work is the design chosen as baseline at the kick-off of the Phase B in 2016 and subsequently slightly modified, after requests and inputs from alignment and maintenance side.

astro-ph.IM↗

arXiv2016

Stellar photometry with Multi Conjugate Adaptive Optics

We overview the current status of photometric analyses of images collected with Multi Conjugate Adaptive Optics (MCAO) at 8-10m class telescopes that operated, or are operating, on sky. Particular attention will be payed to resolved stellar population studies. Stars in crowded stellar systems, such as globular clusters or in nearby galaxies, are ideal test particles to test AO performance. We will focus the discussion on photometric precision and accuracy reached nowadays. We briefly describe our project on stellar photometry and astrometry of Galactic globular clusters using images taken with GeMS at the Gemini South telescope. We also present the photometry performed with DAOPHOT suite of programs into the crowded regions of these globulars reaching very faint limiting magnitudes Ks ~21.5 mag on moderately large fields of view (~1.5 arcmin squared). We highlight the need for new algorithms to improve the modeling of the complex variation of the Point Spread Function across the field of view. Finally, we outline the role that large samples of stellar standards plays in providing a detailed description of the MCAO performance and in precise and accurate colour{magnitude diagrams.

astro-ph.IM↗

arXiv2016

The numerical simulation tool for the MAORY multiconjugate adaptive optics system

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.

astro-ph.IM↗

arXiv2015

A method for space-variant deblurring with application to adaptive optics imaging in astronomy

Images from adaptive optics systems are generally affected by significant distortions of the point spread function (PSF) across the field of view, depending on the position of natural and artificial guide stars. Image reduction techniques circumventing or mitigating these effects are important tools to take full advantage of the scientific information encoded in AO images. The aim of this paper is to propose a method for the deblurring of the astronomical image, given a set of samples of the space-variant PSF. The method is based on a partitioning of the image domain into regions of isoplanatism and on applying suitable deconvolution methods with boundary effects correction to each region. The effectiveness of the boundary effects correction is proved. Moreover, the criterion for extending the disjoint sections to partially overlapping sections is validated. The method is applied to simulated images of a stellar system characterized by a spatially variable PSF. We obtain good photometric quality, and therefore good science quality, by performing aperture photometry on the deblurred images. The proposed method is implemented in IDL in the Software Package "Patch", which is available on http://www.airyproject.eu.

astro-ph.IM↗

arXiv2014

End to end numerical simulations of the MAORY multiconjugate adaptive optics system

MAORY is the adaptive optics module of the E-ELT that will feed the MICADO imaging camera through a gravity invariant exit port. MAORY has been foreseen to implement MCAO correction through three high order deformable mirrors driven by the reference signals of six Laser Guide Stars (LGSs) feeding as many Shack-Hartmann Wavefront Sensors. A three Natural Guide Stars (NGSs) system will provide the low order correction. We develop a code for the end-to-end simulation of the MAORY adaptive optics (AO) system in order to obtain high-delity modeling of the system performance. It is based on the IDL language and makes extensively uses of the GPUs. Here we present the architecture of the simulation tool and its achieved and expected performance.

astro-ph.IM↗

arXiv2011

Hide and seek between Andromeda's halo, disk, and giant stream

Photometry in B, V (down to V ~ 26 mag) is presented for two 23' x 23' fields of the Andromeda galaxy (M31) that were observed with the blue channel camera of the Large Binocular Telescope during the Science Demonstration Time. Each field covers an area of about 5.1kpc x 5.1kpc at the distance of M31 ((m-M)o ~ 24.4 mag), sampling, respectively, a northeast region close to the M31 giant stream (field S2), and an eastern portion of the halo in the direction of the galaxy minor axis (field H1). The stream field spans a region that includes Andromeda's disk and the giant stream, and this is reflected in the complexity of the color magnitude diagram of the field. One corner of the halo field also includes a portion of the giant stream. Even though these demonstration time data were obtained under non-optimal observing conditions the B photometry, acquired in time-series mode, allowed us to identify 274 variable stars (among which 96 are bona fide and 31 are candidate RR Lyrae stars, 71 are Cepheids, and 16 are binary systems) by applying the image subtraction technique to selected portions of the observed fields. Differential flux light curves were obtained for the vast majority of these variables. Our sample includes mainly pulsating stars which populate the instability strip from the Classical Cepheids down to the RR Lyrae stars, thus tracing the different stellar generations in these regions of M31 down to the horizontal branch of the oldest (t ~ 10 Gyr) component.

astro-ph.CO↗

arXiv2009

Laboratory Testing the Layer Oriented Wavefront Sensor for the Multiconjugate Adaptive optics Demonstrator

The Multiconjugate Adaptive optics Demonstrator (MAD) for ESO-Very Large Telescopes (VLT) will demonstrate on sky the MultiConjugate Adaptive Optics (MCAO) technique. In this paper the laboratory tests relative to the first preliminary acceptance in Europe of the Layer Oriented (LO) Wavefront Sensor (WFS) for MAD will be described: the capabilities of the LO approach have been checked and the ability of the WFS to measure phase screens positioned at different altitudes has been experimented. The LO WFS was opto-mechanically integrated and aligned in INAF - Astrophysical Observatory of Arcetri before the delivering to ESO (Garching) to be installed on the final optical bench. The LO WFS looks for up to 8 reference stars on a 2arcmin Field of View and up to 8 pyramids can be positioned where the focal spot images of the reference stars form, splitting the light in four beams. Then two objectives conjugated at different altitudes simultaneously produce a quadruple pupil image of each reference star.

astro-ph.IM↗

arXiv2009

Sky coverage for Layer Oriented MCAO: a detailed analytical and numerical study

One of the key-points for the future developments of the multiconjugate adaptive optics for the astronomy is the availability of the correction for a large fraction of the sky. The sky coverage represents one of the limits of the existing single reference adaptive optics system. Multiconjugate adaptive optics allows to overcome the limitations due to the small corrected field of view and the Layer Oriented approach, in particular by its Multiple Field of View version, increases the number of possible references using also very faint stars to guide the adaptive systems. In this paper we study the sky coverage problem in the Layer Oriented case, using both numerical and analytical approaches. Taking into account a star catalogue and a star luminosity distribution function we run a lot of numerical simulation sequences using the Layer Oriented Simulation Tool (LOST). Moreover we perform for several cases a detailed optimization procedure and a relative full simulation in order to achieve better performance for the considered system in those particular conditions. In this way we can retrieve a distribution of numerically simulated cases that allows computing the sky coverage with respect to a performance parameter as the Strehl Ratio and to the scientific field size.

astro-ph.IM↗

arXiv2009

Layer Oriented Wavefront sensor for MAD on Sky operations

The Multiconjugate Adaptive optics Demonstrator (MAD) has successfully demonstrated on sky both Star Oriented (SO) and Layer Oriented (LO) multiconjugate adaptive optics techniques. While SO has been realized using 3 Shack-Hartmann wavefront sensors (WFS), we designed a multi-pyramid WFS for the LO. The MAD bench accommodates both WFSs and a selecting mirror allows choosing which sensor to use. In the LO approach up to 8 pyramids can be placed on as many reference stars and their light is co-added optically on two different CCDs conjugated at ground and to an high layer. In this paper we discuss LO commissioning phase and on sky operations.

astro-ph.IM↗

arXiv2007

A deep Large Binocular Telescope view of the Canes Venatici I dwarf galaxy

We present the first deep color-magnitude diagram of the Canes Venatici I (CVnI) dwarf galaxy from observations with the wide field Large Binocular Camera on the Large Binocular Telescope. Reaching down to the main-sequence turnoff of the oldest stars, it reveals a dichotomy in the stellar populations of CVnI: it harbors an old (> 10 Gyr), metal-poor ([Fe/H] ~ -2.0) and spatially extended population along with a much younger (~ 1.4-2.0 Gyr), 0.5 dex more metal-rich, and spatially more concentrated population. These young stars are also offset by 64_{-20}^{+40} pc to the East of the galaxy center. The data suggest that this young population, which represent ~ 3-5 % of the stellar mass of the galaxy within its half-light radius, should be identified with the kinematically cold stellar component found by Ibata et al. (2006). CVnI therefore follows the behavior of the other remote MW dwarf spheroidals which all contain intermediate age and/or young populations: a complex star formation history is possible in extremely low-mass galaxies.

astro-ph↗