arXiv subjects

Emmanuel Centeno

Publications and source records attributed to Emmanuel Centeno.

17 recordsLinked to original sources

arXiv2026

Engineering correlated disorder for tailored light scattering

Correlated disorder is known to shape light scattering in ways uncorrelated disorder cannot, from hyperuniform transparency to the structural colors of naturally occurring structures. What has been missing in photonics is a direct link between the disorder and the scattering pattern it produces. Here we show that adding correlated noise to a periodic array splits the scattering pattern into three distinct components: diffraction peaks, a diffuse background, and correlation halos. Often mistaken for broadened diffraction peaks, these halos are in fact independent features: their positions are set by the correlation range, meaning that they can appear between Bragg peaks, and - crucially - they persist far beyond the regime where the diffraction peaks vanish. Shaping the disorder itself offers further control: tuning the noise distribution suppresses selected diffraction peaks, while tuning the correlation statistics moves the halos away from the Bragg positions. This approach reproduces the scattering signatures of natural photonic structures, such as Morpho butterfly wings, and reveals multiple pathways from order to disorder, each with distinct optical properties. It also offers a practical route to inverse design - finding the disorder that produces a desired scattering pattern. This establishes scattering as a designable quantity, expanding the toolkit for metasurfaces and structural colors.

physics.optics↗

arXiv2021

Analysis and fabrication of a photonic crystal based anti-reflective coating for photovoltaics generated by evolutionary optimization

We optimize multilayered anti-reflective coatings for photovoltaic devices, using modern evolutionary algorithms. We apply a rigorous methodology to show that a given structure, which is particularly regular, emerge spontaneously in a very systematical way for a very broad range of conditions. The very regularity of the structure allows for a thorough physical analysis of how the designs operate. This allows to understand that the central part is a photonic crystal utilized as a buffer for light, and that the external layers have the purpose of reducing the impedance mismatch between the outer media and the Bloch mode supported by the photonic crystal. This shows how optimization can suggest new design rules and be considered as a source of inspiration. Finally, we fabricate these structures with easily deployable techniques.

physics.optics↗

arXiv2019

Ultra thin anti-reflective coatings designed using Differential Evolution

We use a state-of-the-art optimization algorithm combined with a careful methodology to find optimal anti-reflective coatings. Our results show that ultra thin structures (less than $300 \,nm$ thick) outperform much thicker gradual patterns as well as traditional interferential anti-reflective coatings. These optimal designs actually combine a gradual increase of the refractive index with patterns meant to leverage interferential effects. Contrarily to gradual patterns, they do not require extremely low refractive index materials, so that they can actually be fabricated. Using a cheap and easily deployable vapor deposition technique, we fabricated a 4-layer anti-reflective coating, which proved very efficient over the whole visible spectrum despite a total thickness of only 200 nm.

physics.optics↗

arXiv2019

The energy point of view in plasmonics

The group velocity of a plasmonic guided mode can be written as the ratio of the flux of the Poynting to the integral of the energy density along the profile of the mode. This theorem, linking the way energy propagates in metals to the properties of guided modes and Bloch modes in a multilayer, provides a unique physical insight in plasmonics. It allows to better understand the link between the negative permittivity of metals and the wide diversity of exotic phenomenon that occur in plasmonics -- like the slowing down of guided modes, the high wavevector and the negative refraction.

physics.optics↗

arXiv2019

Influence of spatial dispersion on surface plasmons, nanoparticles and grating couplers

Recent experiments have shown that spatial dispersion may have a conspicuous impact on the response of plasmonic structures. This suggests that in some cases the Drude model should be replaced by more advanced descriptions that take spatial dispersion into account, like the hydrodynamic model. Here we show that nonlocality in the metallic response affects surface plasmons propagating at the interface between a metal and a dielectric with high permittivity. As a direct consequence, any nanoparticle with a radius larger than 20 nm can be expected to be sensitive to spatial dispersion whatever its size. The same behavior is expected for a simple metallic grating allowing the excitation of surface plasmons, just as in Wood's famous experiments. Importantly, our work suggests that for any plasmonic structure in a high permittivity dielectric, nonlocality should be taken into account.

physics.optics↗

arXiv2018

Evolutionary algorithms converge towards evolved biological photonic structures

Nature features a plethora of extraordinary photonic architectures that have been optimized through natural evolution. While numerical optimization is increasingly and successfully used in photonics, it has yet to replicate any of these complex naturally occurring structures. Using evolutionary algorithms directly inspired by natural evolution, we have retrieved emblematic natural photonic structures, indicating how such regular structures might have spontaneously emerged in nature and to which precise optical or fabrication constraints they respond. Comparisons between algorithms show that recombination between individuals inspired by sexual reproduction confers a clear advantage in this context of modular problems and suggest further ways to improve the algorithms. Such an in silico evolution can also suggest original and elegant solutions to practical problems, as illustrated by the design of counter-intuitive anti-reflective coating for solar cells.

physics.optics↗

arXiv2018

Plasmonic enhancement of spatial dispersion effects in prism coupler experiments

Recent experiments with film-coupled nanoparticles suggest that the impact of spatial dispersion is enhanced in plasmonic structures where high wavevector guided modes are excited. More advanced descriptions of the optical response of metals than Drude's are thus probably necessary in plasmonics. We show that even in classical prism coupler experiments, the plasmonic enhancement of spatial dispersion can be leveraged to make such experiments two orders of magnitude more sensitive. The realistic multilayered structures involved rely on layers that are thick enough to rule our any other phenomenon as the spill-out. Optical evanescent excitation of plasmonic waveguides using prism couplers thus constitutes an ideal platform to study spatial dispersion.

physics.optics↗

arXiv2017

Fresnel coefficients and Fabry-Perot formula for spatially dispersive metallic layers

The repulsion between free electrons inside a metal makes its optical response spatially dispersive, so that it is not described by Drude's model but by a hydrodynamic model. We give here fully analytic results for a metallic slab in this framework, thanks to a two-modes cavity formalism leading to a Fabry-Perot formula, and show that a simplification can be made that preserves the accuracy of the results while allowing much simpler analytic expressions. For metallic layers thicker than 2.7 nm modified Fresnel coefficients can actually be used to accurately predict the response of any multilayer with spatially dispersive metals (for reflection, transmission or the guided modes). Finally, this explains why adding a small dielectric layer[Y. Luo et al., Phys. Rev. Lett. 111, 093901 (2013)] allows to reproduce the effects of nonlocality in many cases, and especially for multilayers.

physics.optics↗

arXiv2016

Leveraging beam deformation to improve the detection of resonances

Decades of work on beam deformation on reflection, and especially on lateral shifts, have spread the idea that a reflected beam is larger than the incident beam. However, when the right conditions are met, a beam reflected by a multilayered resonant structure can be 10\% narrower than the incoming beam. Such an easily measurable change occurs on a very narrow angular range close to a resonance, which can be leveraged to improve the resolution of sensors based on the detection of surface plasmon resonances by a factor three. We provide theoretical tools to deal with this effect, and a thorough physical discussion that leads to expect similar phenomenon to occur for temporal wavepackets and in other domains of physics.

physics.optics↗

arXiv2016

Universal metamaterial absorbe

We propose a design for an universal absorber, characterized by a resonance frequency that can be tuned from visible to microwave frequencies independently of the choice of the metal and the dielectrics involved. An almost resonant perfect absorption up to 99.8 % is demonstrated at resonance for all polarization states of light and for a very wide angular aperture. These properties originate from a magnetic Fabry-Perot mode that is confined in a dielectric spacer of $λ/100$ thickness by a metamaterial layer and a mirror. An extraordinary large funneling through nano-slits explains how light can be trapped in the structure. Simple scaling laws can be used as a recipe to design ultra-thin perfect absorbers whatever the materials and the desired resonance wavelength, making our design truly universal.

physics.optics↗

arXiv2016

Influence of spatial dispersion in metals on the optical response of deeply subwavelength slit arrays

In the framework of the hydrodynamic model describing the response of electrons in a metal, we show that arrays of very narrow and shallow metallic slits have an optical response that is influenced by the spatial dispersion in metals arising from the repulsive interaction between electrons. As a simple Fabry-Perot model is not accurate enough to describe the structure's behavior, we propose to consider the slits as generalized cavities with two modes, one being propagative and the other evanescent. This very general model allows to conclude that the impact of spatial dispersion on the propagative mode is the key factor explaining why the whole structure is sensitive to spatial dispersion. As the fabrication of such structures with relatively large gaps compared to previous experiments is within our reach, this work paves the way for future much needed experiments on nonlocality.

physics.optics↗

arXiv2014

Nonlocality in metallo-dielectric multilayers: numerical tools and physical analysis

We provide theoretical and numerical tools to quantitatively study the impact of nonlocality arising from free electrons in metals on the optical properties of metallo-dielectric multilayers. Though effects due to nonlocality are in general quite small, they nevertheless can be important for very thin (typically below 10 nm) metallic layers - as are used in structures characterized by relatively flat dispersion curves. Such structures include those with negative refractive index; hyperbolic metamaterials; and materials with index near zero. We find in all cases that the inclusion of nonlocal effects through application of the hydrodynamic model to the electron response leads to a higher transmission through the considered medium. Finally, we examine the excitation of gap-plasmon resonances, where nonlocality plays a much greater role, and suggest possible routes for experimental investigation.

physics.optics↗

arXiv2013

Ultimate resolution of indefinite metamaterial flat lenses

We show that any metallo-dielectric multilayer with a hyperbolic dispersion relation can actually be characterized by a complex effective index. This refractive index, extracted from the complex Bloch band diagram, can be directly linked to the super-resolution of a flat lens made of this so- called indefinite metamaterials. This allows for a systematic optimization of the lens design, leading to structures that are outperforming state-of-art flat lenses. We show that, even when fully taking absorption into account, our design provides super-resolved images for visible light up to a distance of one wavelength from the lens edge.

physics.optics↗

arXiv2012

Optically optimal wavelength-scale patterned ITO/ZnO composite coatings for thin film solar cells

A methodology is proposed for finding structures that are, optically speaking, locally optimal : a physical analysis of much simpler structures is used to constrain the optimization process. The obtained designs are based on a flat amorphous silicon layer (to minimize recombination) with a patterned anti-reflective coating made of ITO or ZnO, or a composite ITO/ZnO coating. These latter structures are realistic and present good performances despite very thin active layers.

physics.optics↗

arXiv2011

Mesoscopic self-collimation and slow light in all-positive index layered photonic crystals

We demonstrate a mesoscopic self-collimation effect in photonic crystal superlattices consisting of a periodic set of all-positive index 2D photonic crystal and homogeneous layers. We develop an electromagnetic theory showing that diffraction-free beams are observed when the curvature of the optical dispersion relation is properly compensated for. This approach allows to combine slow light regime together with self-collimation in photonic crystal superlattices presenting an extremely low filling ratio in air.

physics.optics↗

arXiv2011

Large negative lateral shifts due to negative refraction

When a thin structure in which negative refraction occurs (a metallo-dielectric or a photonic crystal) is illuminated by a beam, the reflected and transmitted beam can undergo a large negative lateral shift. This phenomenon can be seen as an interferential enhancement of the geometrical shift and can be considered as a signature of negative refraction.

physics.optics↗

arXiv2000

Light propagation control by finite-size effects in photonic crystals

We exhibit the strong influence on light propagation of the finite size in photonic band-gap material. We show that light emission can be controlled by the symmetry group of the boundary of the finite device. These results lead simply to important practical applications.

physics.optics↗