arXiv subjects

Emmanuel Giner

Publications and source records attributed to Emmanuel Giner.

48 records · Page 3Linked to original sources

arXiv2018

Interplay between electronic correlation and metal-ligand delocalization in the spectroscopy of transition metal compounds: case study on a series of planar Cu$^{2+}$ complexes

We present a comprehensive theoretical study of the physical phenomena that determine the relative energies of the three of the lowest electronic states of each of the square-planar copper complexes $\cucl$, $\cunh$ and $\cuwater$, and present a detailed analysis of the extent to which truncated configuration interaction (CI) and coupled cluster (CC) theories succeed in predicing the excitation energies. We find that ligand-metal charge transfer (CT) single excitations play a crucial role in the correct determination of the properties of these systems, even though the CT processes first occur at fourth order in perturbation theory, and propose a suitable choice of minimal active space for describing these systems with multi-reference theories. CCSD energy differences agree very well with near full CI values even though the $T_1$ diagnostics are large, which casts doubt on the usefulness of singles-amplitude based multi-reference diagnostics. CISD severely underestimates the excitation energies and the failure is a direct consequence of the size-inconsisency errors in CISD. Finally, we present reference values for the energy differences computed using explicitly correlated CCSD(T) and BCCD(T) theory.

cond-mat.str-el↗

arXiv2017

A Jeziorski-Monkhorst fully uncontracted Multi-Reference perturbative treatment I: principles, second-order versions and tests on ground state potential energy curves

The present paper introduces a new multi-reference perturbation approach developed at second order, based on a Jeziorsky-Mokhorst expansion using individual Slater determinants as perturbers. Thanks to this choice of perturbers, an effective Hamiltonian may be built, allowing for the dressing of the Hamiltonian matrix within the reference space, assumed here to be a CAS-CI. Such a formulation accounts then for the coupling between the static and dynamic correlation effects. With our new definition of zeroth-order energies, these two approaches are strictly size-extensive provided that local orbitals are used, as numerically illustrated here and formally demonstrated in the appendix. Also, the present formalism allows for the factorization of all double excitation operators, just as in internally contracted approaches, strongly reducing the computational cost of these two approaches with respect to other determinant-based perturbation theories. The accuracy of these methods has been investigated on ground-state potential curves up to full dissociation limits for a set of six molecules involving single, double and triple bond breaking. The spectroscopic constants obtained with the present methods are found to be in very good agreement with the full configuration interaction (FCI) results. As the present formalism does not use any parameter or numerically unstable operation, the curves obtained with the two methods are smooth all along the dissociation path.

physics.chem-ph↗

arXiv2017

Alternative definition of excitation amplitudes in Multi-Reference state-specific Coupled Cluster

A central difficulty of state-specific Multi-Reference Coupled Cluster (MR-CC) formalisms concerns the definition of the amplitudes of the single and double excitation operators appearing in the exponential wave operator. If the reference space is a complete active space (CAS) the number of these amplitudes is larger than the number of singly and doubly excited determinants on which one may project the eigenequation, and one must impose additional conditions. The present work first defines a state-specific reference-independent operator $\hat{\tilde{T}}^m$ which acting on the CAS component of the wave function $|Ψ_0^m \rangle$ maximizes the overlap between $(1+\hat{\tilde{T}}^m)|Ψ_0^m \rangle$ and the eigenvector of the CAS-SD CI matrix $|Ψ_{\rm CAS-SD}^m \rangle$. This operator may be used to generate approximate coefficients of the Triples and Quadruples, and a dressing of the CAS-SD CI matrix, according to the intermediate Hamiltonian formalism. The process may be iterated to convergence. As a refinement towards a strict Coupled Cluster formalism, one may exploit reference-independent amplitudes provided by $(1+\hat{\tilde{T}}^m)|Ψ_0^m \rangle$ to define a reference-dependent operator $\hat{T}^m$ by fitting the eigenvector of the (dressed) CAS-SD CI matrix. The two variants, which are internally uncontracted, give rather similar results. The new MR-CC version has been tested on the ground state potential energy curves of 6 molecules (up to triple-bond breaking) and a two excited states. The non-parallelism error with respect to the Full-CI curves is of the order of 1 m$E_{\rm h}$.

physics.chem-ph↗

arXiv2016

Using CIPSI nodes in diffusion Monte Carlo

Several aspects of the recently proposed DMC-CIPSI approach consisting in using selected Configuration Interaction (SCI) approaches such as CIPSI (Configuration Interaction using a Perturbative Selection done Iteratively) to build accurate nodes for diffusion Monte Carlo (DMC) calculations are presented and discussed. The main ideas are illustrated with a number of calculations for diatomics molecules and for the benchmark G1 set.

physics.chem-ph↗

arXiv2016

Toward an improved control of the fixed-node error in quantum Monte Carlo: The case of the water molecule

All-electron Fixed-node Diffusion Monte Carlo (FN-DMC) calculations for the nonrelativistic ground-state energy of the water molecule at equilibrium geometry are presented. The determinantal part of the trial wavefunction is obtained from a perturbatively selected Configuration Interaction calculation (CIPSI method) including up to about 1.4 million of determinants. Calculations are made using the cc-pCV$n$Z family of basis sets, with $n$=2 to 5. In contrast with most QMC works no re-optimization of the determinantal part in presence of a Jastrow is performed. For the largest cc-pCV5Z basis set the lowest upper bound for the ground-state energy reported so far of -76.43744(18) is obtained. The fixed-node energy is found to decrease regularly as a function of the cardinal number $n$ and the Complete Basis Set limit (CBS) associated with {\it exact nodes} is easily extracted. The resulting energy of -76.43894(12) -in perfect agreement with the best experimentally derived value- is the most accurate theoretical estimate reported so far. We emphasize that employing selected CI nodes of increasing quality in a given family of basis sets may represent a simple, deterministic, reproducible, and systematic way of controlling the fixed-node error in DMC.

physics.chem-ph↗

arXiv2016

Quantum Monte Carlo with reoptimized perturbatively selected configuration-interaction wave functions

We explore the use in quantum Monte Carlo (QMC) of trial wave functions consisting of a Jastrow factor multiplied by a truncated configuration-interaction (CI) expansion in Slater determinants obtained from a CI perturbatively selected iteratively (CIPSI) calculation. In the CIPSI algorithm, the CI expansion is iteratively enlarged by selecting the best determinants using perturbation theory, which provides an optimal and automatic way of constructing truncated CI expansions approaching the full CI limit. We perform a systematic study of variational Monte Carlo (VMC) and fixed-node diffusion Monte Carlo (DMC) total energies of first-row atoms from B to Ne with different levels of optimization of the parameters (Jastrow parameters, coefficients of the determinants, and orbital parameters) in these trial wave functions. The results show that the reoptimization of the coefficients of the determinants in VMC (together with the Jastrow factor) leads to an important lowering of both VMC and DMC total energies, and to their monotonic convergence with the number of determinants. In addition, we show that the reoptimization of the orbitals is also important in both VMC and DMC for the Be atom when using a large basis set. These reoptimized Jastrow-CIPSI wave functions appear as promising, systematically improvable trial wave functions for QMC calculations.

physics.chem-ph↗

arXiv2015

Quantum Monte Carlo with very large multideterminant wavefunctions

An algorithm to compute efficiently the first two derivatives of (very) large multideterminant wavefunctions for quantum Monte Carlo calculations is presented. The calculation of determinants and their derivatives is performed using the Sherman-Morrison formula for updating the inverse Slater matrix. An improved implementation based on the reduction of the number of column substitutions and on a very efficient implementation of the calculation of the scalar products involved is presented. It is emphasized that multideterminant expansions contain in general a large number of identical spin-specific determinants: for typical configuration interaction-type wavefunctions the number of unique spin-specific determinants $N_{\rm det}^σ$ ($σ=\uparrow,\downarrow$) with a non-negligible weight in the expansion is of order ${\cal O}(\sqrt{N_{\rm det}})$. We show that a careful implementation of the calculation of the $N_{\rm det}$-dependent contributions can make this step negligible enough so that in practice the algorithm scales as the total number of unique spin-specific determinants, $\; N_{\rm det}^\uparrow + N_{\rm det}^\downarrow$, over a wide range of total number of determinants (here, $N_{\rm det}$ up to about one million), thus greatly reducing the total computational cost. Finally, a new truncation scheme for the multideterminant expansion is proposed so that larger expansions can be considered without increasing the computational time. The algorithm is illustrated with all-electron Fixed-Node Diffusion Monte Carlo calculations of the total energy of the chlorine atom. Calculations using a trial wavefunction including about 750 000 determinants with a computational increase of $\sim$ 400 compared to a single-determinant calculation are shown to be feasible.

physics.chem-ph↗

arXiv2015

Efficiency of a Multi-Reference Coupled Cluster method

The multi-reference Coupled Cluster method first proposed by Meller et al (J. Chem. Phys. 1996) has been implemented and tested. Guess values of the amplitudes of the single and double excitations (the ${\hat T}$ operator) on the top of the references are extracted from the knowledge of the coefficients of the Multi Reference Singles and Doubles Configuration Interaction (MRSDCI) matrix. The multiple parentage problem is solved by scaling these amplitudes on the interaction between the references and the Singles and Doubles. Then one proceeds to a dressing of the MRSDCI matrix under the effect of the Triples and Quadruples, the coefficients of which are estimated from the action of ${\hat T}^2$. This dressing follows the logics of the intermediate effective Hamiltonian formalism. The dressed MRSDCI matrix is diagonalized and the process is iterated to convergence. The method is tested on a series of benchmark systems from Complete Active Spaces (CAS) involving 2 or 4 active electrons up to bond breakings. The comparison with Full Configuration Interaction (FCI) results shows that the errors are of the order of a few milli-hartree, five times smaller than those of the CASSDCI. The method is totally uncontracted, parallelizable, and extremely flexible since it may be applied to selected MR and/or selected SDCI. Some potential generalizations are briefly discussed.

physics.chem-ph↗

arXiv2015

A useful underestimate for the convergence of integral functionals

This article deals with the lower compactness property of a sequence of integrands and the use of this key notion in various domains: convergence theory, optimal control, non-smooth analysis. First about the interchange of the weak epi-limit and the symbol of integration for a sequence of integral functionals. These functionals are defined on a topological space $(\mathcal{X, T})$ where $\mathcal{X}$ is a subset of measurable functions and the $\mathcal{T}$ convergence is stronger than or equal to the convergence in the Bitting sense. Given a sequence $(f_{n})_n$ of integrands, if the integrand $f$ is the weak lower sequential epi-limit of the integrands $f_n$ one of the main results of this article asserts that under the Ioffe's criterion, the $\mathcal{T}$-lower sequential epi-limit of the sequence of integral functionals at the point $x$ is bounded below by the value of the integral functional associated to the Fenchel-Moreau-Rockafellar biconjugate of $f$ at the point $x$. Then the strong-weak semicontinuity (respectively the subdifferentiability) are studied in relation with the Ioffe's criterion. This permits with original proofs to give new conditions for the strong-weak lower semicontinuity at a given point, and to obtain necessary and sufficient conditions for the Fréchet and the (weak)Hadamard subdifferentiability of integral functionals on general spaces, particularly on Lebesgue spaces.

math.OC↗

arXiv2014

Fixed-Node Diffusion Monte Carlo potential energy curve of the fluorine molecule F2 using selected configuration interaction trial wavefunctions

The potential energy curve of the F$_2$ molecule is calculated with Fixed-Node Diffusion Monte Carlo (FN-DMC) using Configuration Interaction (CI)-type trial wavefunctions. To keep the number of determinants reasonable (the first and second derivatives of the trial wavefunction need to be calculated at each step of FN-DMC), the CI expansion is restricted to those determinants that contribute the most to the total energy. The selection of the determinants is made using the so-called CIPSI approach (Configuration Interaction using a Perturbative Selection made Iteratively). Quite remarkably, the nodes of CIPSI wavefunctions are found to be systematically improved when increasing the number of selected determinants. To reduce the non-parallelism error of the potential energy curve a scheme based on the use of a $R$-dependent number of determinants is introduced. Numerical results show that improved FN-DMC energy curves for the F$_2$ molecule are obtained when employing CIPSI trial wavefunctions. Using the Dunning's cc-pVDZ basis set the FN-DMC energy curve is of a quality similar to that obtained with FCI/cc-pVQZ. A key advantage of using selected CI in FN-DMC is the possibility of improving nodes in a systematic and automatic way without resorting to a preliminary multi-parameter stochastic optimization of the trial wavefunction performed at the Variational Monte Carlo level as usually done in FN-DMC.

physics.chem-ph↗

arXiv2014

Spin density distribution in open-shell transition metal systems: A comparative post-Hartree-Fock, Density Functional Theory and quantum Monte Carlo study of the CuCl2 molecule

We present a comparative study of the spatial distribution of the spin density (SD) of the ground state of CuCl2 using Density Functional Theory (DFT), quantum Monte Carlo (QMC), and post-Hartree-Fock wavefunction theory (WFT). A number of studies have shown that an accurate description of the electronic structure of the lowest-lying states of this molecule is particularly challenging due to the interplay between the strong dynamical correlation effects in the 3d shell of the copper atom and the delocalization of the 3d hole over the chlorine atoms. It is shown here that qualitatively different results for SD are obtained from these various quantum-chemical approaches. At the DFT level, the spin density distribution is directly related to the amount of Hartree-Fock exchange introduced in hybrid functionals. At the QMC level, Fixed-node Diffusion Monte Carlo (FN-DMC) results for SD are strongly dependent on the nodal structure of the trial wavefunction employed (here, Hartree-Fock or Kohn-Sham with a particular amount of HF exchange) : in the case of this open-shell system, the 3N -dimensional nodes are mainly determined by the 3-dimensional nodes of the singly occupied molecular orbital. Regarding wavefunction approaches, HF and CASSCF lead to strongly localized spin density on the copper atom, in sharp contrast with DFT. To get a more reliable description and shed some light on the connections between the various theoretical descriptions, Full CI-type (FCI) calculations are performed. To make them feasible for this case a perturbatively selected CI approach generating multi-determinantal expansions of reasonable size and a small tractable basis set are employed. Although semi-quantitative, these near-FCI calculations allow to clarify how the spin density distribution evolves upon inclusion of dynamic correlation effects. A plausible scenario about the nature of the SD is proposed.

physics.chem-ph↗

arXiv2013

An efficient implementation of Slater-Condon rules

Slater-Condon rules are at the heart of any quantum chemistry method as they allow to simplify $3N$-dimensional integrals as sums of 3- or 6-dimensional integrals. In this paper, we propose an efficient implementation of those rules in order to identify very rapidly which integrals are involved in a matrix element expressed in the determinant basis set. This implementation takes advantage of the bit manipulation instructions on x86 architectures that were introduced in 2008 with the SSE4.2 instruction set. Finding which spin-orbitals are involved in the calculation of a matrix element doesn't depend on the number of electrons of the system.

physics.comp-ph↗