arXiv subjects

Emre Arslan

Publications and source records attributed to Emre Arslan.

14 recordsLinked to original sources

arXiv2026

Antenna Tilt Failure Detection and Estimation via Integrated Sensing and Communications

This paper addresses the critical sensitivity issue of narrow-beam communication systems to physical misalignments and exploits the potential of Integrated Sensing and Communications (ISAC) technology to propose a sensor-free antenna tilt failure detection and estimation framework. The proposed methods utilize environmental static clutter as geometric anchors to monitor systematic gain shifts in clutter heat maps. The proposed methods are introduced for precise antenna tilt detection and estimation using the standard 5G NR frame structure and two different waveforms. Numerical results show the potential of the proposed framework to enable autonomous, self healing network maintenance without the need for external sensors.

eess.SP↗

arXiv2026

Turbo-GS: Accelerating 3D Gaussian Fitting for High-Quality Radiance Fields

Novel-view synthesis plays a crucial role in computer vision with applications in 3D reconstruction, mixed reality, and robotics. Recent approaches, such as 3D Gaussian Splatting (3DGS), have emerged as state-of-the-art solutions, offering high-quality novel view synthesis in real time. However, training 3DGS models remains slow, particularly for high-resolution images, often requiring hours to fit a scene with 200 views. In this work, we aim to accelerate the fitting process by reducing computational overhead and improving learning efficiency. Specifically, we introduce a dilated rendering technique that renders only a subset of pixels instead of the full image, significantly reducing computational costs. To enhance learning efficiency, we develop a convergence-aware budget control mechanism that balances the addition of new Gaussians with the optimization of existing ones. Additionally, to improve densification efficiency and prevent gradient vanishing, we incorporate both positional and appearance errors to improve the effectiveness of densification. With these improvements, we achieve fast 4K-resolution fitting while maintaining, or even improving, novel view rendering quality. Extensive experiments demonstrate that our method achieves significantly faster optimization than existing approaches while preserving high rendering fidelity.

cs.CV↗

arXiv2026

Experimental Performance of a 5G N78 Reconfigurable Intelligent Surface: From Controlled Measurements to Commercial Network Deployment

This paper presents a real-world experimental analysis of a modular reconfigurable intelligent surface (RIS) prototype designed to operate in the 5G N78 band. Unlike most RIS studies in the literature that focus on simulations or controlled setups, the proposed system is validated through three phases consisting of indoor measurements, outdoor long-range tests, and deployment in a live commercial 5G standalone network. The RIS is exploited to enhance coverage in a non-line-of-sight (NLoS) zone, identified through baseline drive tests. Results show promising gains in RSRP and SINR, while also restoring 5G service at user locations where access was previously not available. The results highlight the practical potential of RIS for coverage enhancement in operational 5G networks.

eess.SP↗

arXiv2025

Experimental Performances of mmWave RIS-assisted 5G-Advanced Wireless Deployments in Urban Environments

Reconfigurable intelligent surface (RIS) has emerged as a groundbreaking technology for 6G wireless communication networks, enabling cost-effective control over wireless propagation environment. By dynamically manipulating its codebook so as to deflect the direction of the reflected electromagnetic wave, RIS can achieve enhanced signal quality, extended coverage, and interference mitigation. This study presents experimental performance of ZTE Dynamic 2.0 RIS products through a series of real-world tests conducted on Turkcell's millimeter-wave (mmWave) testbed. The evaluation involves network coverage extension in urban areas, multi-user efficiency, and the integration of virtual reality technology to support immersive applications in next-generation 6G networks. Through a comprehensive measurement-based analysis, the performance of the RIS product is demonstrated, highlighting its potential to address critical challenges in mmWave communications and to enable advanced 6G use cases.

eess.SP↗

arXiv2025

RIS Size Determination Across Frequencies and Deployment Scenarios: A Simulation-Based Study

Despite the growing interest in the integration of reconfigurable intelligent surfaces (RIS) into next-generation wireless communications systems, a critical gap remains in understanding what the dimensions of an RIS must be to provide meaningful performance gains across realistic deployment scenarios. This paper addresses this challenge by presenting a practical and scenario-aware methodology for determining optimal RIS dimensions, tailored to specific frequency bands, environments, and use cases. Leveraging a realistic simulation model that incorporates angular scattering characteristics, practical network node locations, and propagation constraints, we evaluate the RIS-assisted performance in a diverse set of configurations. For selected use-cases, we quantify key performance indicators such as average signal-to-noise ratio and outage probability, and we demonstrate how RIS size impacts system reliability. Our findings show that RIS deployment effectiveness is highly sensitive to both physical size and geometric placement, and that there is no one-size-fits-all solution. The proposed framework, supported by detailed use case tables and validated through comprehensive simulations, offers design guidelines for operators and vendors seeking to deploy RIS in practical wireless network settings.

eess.SP↗

arXiv2024

Hybrid Reconfigurable Intelligent Surface Enabled Over the Air Index Modulation

Users' desire for enhanced performance drive the inevitable technological progress on vertical applications in wireless communication systems. To meet these demands, researchers vigorously investigate potential 6G and beyond technologies and solutions. Reconfigurable intelligent surfaces (RISs) have risen in popularity and attracted the attention of academia as well as industry and seem to be a promising candidate for 6G technology. RISs are reflective metamaterials with many configurable elements consisting of pin diodes that have the ability to manipulate the impinging signals' properties, hence, enabling some sort of virtual control over the wireless channel. In this paper, we propose a novel over-the-air index modulation (IM) scheme through the use of a hybrid RIS with active and passive partitions to convey additional IM bits over-the-air. In addition we propose another modified scheme that allows the transmission for even more IM bits but at the expense of certain trade-offs. First, we present the system model for both of the proposed schemes. Furthermore, comprehensive computer simulation results are provided and discussed presenting the superior bit error rate (BER) performance and additional benefits of the proposed systems compared to similar benchmarks.

eess.SP↗

arXiv2024

Reconfigurable Intelligent Surface Identification in Mobile Networks: Opportunities and Challenges

The advent of the sixth generation (6G) wireless networks heralds a transformative era for mobile communication, where the integration of cutting-edge technologies like Reconfigurable Intelligent Surfaces (RISs) is paramount in addressing the burgeoning demands for energy efficiency, high data rates, reliable connectivity, and enhanced coverage in densely populated areas. RISs have attracted the attention of academia as well as the industry and emerged as a beacon of innovation, offering a novel paradigm to reconfigure the wireless propagation environment beneficially, thereby enhancing the overall network performance. It is envisioned that the deployment of numerous RISs in a mobile network will serve user equipments (UEs) to boost various key performance indicators (KPIs), with lower energy consumption compared to alternative solutions (e.g., relays, and network-controlled repeaters). However, the knowledge of whether or not a UE is being served through an RIS and if so, which RIS it is being served by is crucial and beneficial for various network planning and operational reasons. In this paper, we address the importance and the benefits of RIS identification in a mobile network. Additionally, we guide the readers and researchers by introducing alternative methods to enable RIS identification. Through the lens of this research, we unveil and shed light to various benefits, the challenges, and future opportunities in the identification of RISs serving mobile users in complex network environments, highlighting the necessity for advanced identification strategies to fully harness the potential of RIS technology in next-generation wireless systems.

eess.SP↗

arXiv2024

Reconfigurable Intelligent Surface-Enabled Downlink NOMA

Reconfigurable intelligent surfaces (RISs) bring great potential to the advancement of 6G and beyond wireless communication technologies. RISs introduce a great degree of flexibility, allowing some sort of virtual control over the wireless channel. Exploiting the flexibility introduced by RISs, we propose a novel RIS-enabled downlink (DL) non-orthogonal multiple access (NOMA) scheme where NOMA is enabled over-the-air rather than at the base station (BS) or the receiver (Rx). Here, the RIS is partitioned into distinctive groups where each part of the RIS serves a different user equipment (UE) to perform multiple accessing. The BS transmits an unmodulated signal to the RIS, and each partition modulates the impinging signal over-the-air by introducing a phase shift according to the incoming information bits to serve the corresponding UE. First, the end-to-end system model for the proposed system is presented. Furthermore, outage probability calculations, theoretical error probability analysis, and bit error rate (BER) derivations are discussed and reinforced with comprehensive computer simulation results.

eess.SP↗

arXiv2023

Clustering Students Based on Gamification User Types and Learning Styles

The aim of this study is clustering students according to their gamification user types and learning styles with the purpose of providing instructors with a new perspective of grouping students in case of clustering which cannot be done by hand when there are multiple scales in data. The data used consists of 251 students who were enrolled at a Turkish state university. When grouping students, K-means algorithm has been utilized as clustering algorithm. As for determining the gamification user types and learning styles of students, Gamification User Type Hexad Scale and Grasha-Riechmann Student Learning Style Scale have been used respectively. Silhouette coefficient is utilized as clustering quality measure. After fitting the algorithm in several ways, highest Silhouette coefficient obtained was 0.12 meaning that results are neutral but not satisfactory. All the statistical operations and data visualizations were made using Python programming language.

cs.LG↗

arXiv2023

Network-Independent and User-Controlled RIS: An Experimental Perspective

The march towards 6G is accelerating and future wireless network architectures require enhanced performance along with significant coverage especially, to combat impairments on account of the wireless channel. Reconfigurable intelligent surface (RIS) technology is a promising solution, that has recently been considered as a research topic in standards, to help manipulate the channel in favor of users needs. Generally, in experimental RIS systems, the RIS is either connected to the transmitter (Tx) or receiver (Rx) through a physical backhaul link and it is controlled by the network and requires significant computation at the RIS for codebook (CB) designs. In this paper, we propose a practical user-controlled RIS system that is isolated from the network to enhance communication performance and provide coverage to the user based on its location and preference. Furthermore, a low-complexity algorithm is proposed to aid in CB selection for the user, which is performed through the wireless cloud to enable a passive and energy efficient RIS. Extensive experimental test-bed measurements demonstrate the enhanced performance of the proposed system while both results match and validate each other.

eess.SP↗

arXiv2022

Reconfigurable Intelligent Surface Enabled Over-the-Air Uplink Non-orthogonal Multiple Access

Innovative reconfigurable intelligent surface (RIS) technologies are rising and recognized as promising candidates to enhance 6G and beyond wireless communication systems. RISs acquire the ability to manipulate electromagnetic signals, thus, offering a degree of control over the wireless channel and the potential for many more benefits. Furthermore, active RIS designs have recently been introduced to combat the critical double fading problem and other impairments passive RIS designs may possess. In this paper, the potential and flexibility of active RIS technology are exploited for uplink systems to achieve virtual non-orthogonal multiple access (NOMA) through power disparity over-the-air rather than controlling transmit powers at the user side. Specifically, users with identical transmit power, path loss, and distance can communicate with a base station sharing time and frequency resources in a NOMA fashion with the aid of the proposed hybrid RIS system. Here, the RIS is partitioned into active and passive parts and the distinctive partitions serve different users aligning their phases accordingly while introducing a power difference to the users' signals to enable NOMA. First, the end-to-end system model is presented considering two users. Furthermore, outage probability calculations and theoretical error probability analysis are discussed and reinforced with computer simulation results.

cs.IT↗

arXiv2022

Over-the-Air Equalization with Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surface (RIS)-empowered communications is on the rise and is a promising technology envisioned to aid in 6G and beyond wireless communication networks. RISs can manipulate impinging waves through their electromagnetic elements enabling some sort of control over the wireless channel. In this paper, the potential of RIS technology is explored to perform a sort of virtual equalization over-the-air for frequency-selective channels whereas, equalization is generally conducted at either the transmitter or receiver in conventional communication systems. Specifically, with the aid of an RIS, the frequency-selective channel from the transmitter to the RIS is transformed to a frequency-flat channel through elimination of inter-symbol interference (ISI) components at the receiver. ISI is eliminated by adjusting the phases of impinging signals particularly to maximize the incoming signal of the strongest tap. First, a general end-to-end system model is provided and a continuous to discrete-time signal model is presented. Subsequently, a probabilistic analysis for the elimination of ISI terms is conducted and reinforced with computer simulations. Furthermore, a theoretical error probability analysis is performed along with computer simulations. It is analyzed and demonstrated that conventional RIS phase alignment methods, can successfully eliminate ISI and the RIS-aided communication channel can be converted from frequency-selective to frequency-flat.

eess.SP↗

arXiv2020

Index Modulation-Based Flexible Non-Orthogonal Multiple Access

Non-orthogonal multiple access (NOMA) is envisioned as an efficient candidate for future communication systems. This letter proposes a novel orthogonal frequency division multiplexing (OFDM) with index modulation (IM)-based NOMA scheme, called OFDM-IM NOMA, for future multi-user communication systems. Inspired by IM and classical OFDM-NOMA, users utilize flexibility by adjusting power allocation factors and subcarrier activation ratios. Our new scheme allows different service users to share available resources as in classical NOMA, more efficiently. It is shown that OFDM-IM NOMA reliably supports a high and low data rate user at the same resources by adjusting their subcarrier activation ratios.

eess.SP↗

arXiv2020

Sparse-Encoded Codebook Index Modulation

Ultra-reliable and low-latency communications (URLLC) partakes a major role in 5G networks for mission-critical applications. Sparse vector coding (SVC) appears as a strong candidate for future URLLC networks by enabling superior performance in terms of bit error rate (BER). SVC exploits the virtual digital domain (VDD) and compressed sensing (CS) algorithms to encode and decode its information through active symbol indices. In this paper, first, a clever encoding/decoding algorithm is proposed for the SVC scheme, which allows the use of all possible activation patterns (APs) resulting in increasing spectral efficiency. Second, a novel solution is proposed to convey additional information bits by further exploiting index modulation (IM) for the codebooks of the SVC scheme. Computer simulation results reveal that our low-complexity algorithm and novel IM solution provide not only a superior BER performance but also an increase in the number of bits conveyed by IM compared to the ordinary SVC approach.

eess.SP↗