arXiv subjects

Eng Gee Lim

Publications and source records attributed to Eng Gee Lim.

At least 19 recordsLinked to original sources

arXiv2026

An Asynchronous Two-Speed Kalman Filter for Real-Time UUV Cooperative Navigation Under Acoustic Delays

In Global Navigation Satellite System (GNSS)-denied underwater environments, individual unmanned underwater vehicles (UUVs) suffer from unbounded dead-reckoning drift, making collaborative navigation (CN) crucial for accurate state estimation. However, the severe communication delay inherent in underwater acoustic channels poses serious challenges to real-time state estimation. Traditional filters, such as Extended Kalman Filters (EKFs) or Unscented Kalman Filters (UKFs), usually block the main control loop while waiting for delayed data, or effectively discard Out-of-Sequence Measurements (OOSMs), resulting in serious drift. To address this, we propose an Asynchronous Two-Speed Kalman Filter (TSKF) enhanced by a novel projection mechanism, which we term Variational History Distillation (VHD). The proposed architecture decouples the estimation process into two parallel threads: a fast-rate thread that utilizes Gaussian Process (GP) compensated dead reckoning to guarantee high-frequency real-time control, and a slow-rate thread dedicated to processing asynchronously delayed collaborative information. By introducing a Finite-Length Circular State Buffer (FLCSB), the algorithm applies delayed measurements to their corresponding historical states, and utilizes a VHD-based projection to fast-forward the correction to the current time without computationally heavy recalculations. Simulation results demonstrate that the proposed TSKF maintains a trajectory error comparable to computationally intensive batch-optimization methods under severe delays (up to 30\,s). Executing in sub-millisecond time, it significantly outperforms standard EKF/UKF. The results demonstrate an effective control, communication, and computing (3C) co-design that significantly enhances the resilience of autonomous marine automation systems.

cs.RO↗

arXiv2026

Communication Outage-Resistant UUV State Estimation: A Variational History Distillation Approach

The reliable operation of Unmanned Underwater Vehicle (UUV) clusters is highly dependent on continuous acoustic communication. However, this communication method is highly susceptible to intermittent interruptions. When communication outages occur, standard state estimators such as the Unscented Kalman Filter (UKF) will be forced to make open-loop predictions. If the environment contains unmodeled dynamic factors, such as unknown ocean currents, this estimation error will grow rapidly, which may eventually lead to mission failure. To address this critical issue, this paper proposes a Variational History Distillation (VHD) approach. VHD regards trajectory prediction as an approximate Bayesian reasoning process, which links a standard motion model based on physics with a pattern extracted directly from the past trajectory of the UUV. This is achieved by synthesizing ``virtual measurements'' distilled from historical trajectories. Recognizing that the reliability of extrapolated historical trends degrades over extended prediction horizons, an adaptive confidence mechanism is introduced. This mechanism allows the filter to gradually reduce the trust of virtual measurements as the communication outage time is extended. Extensive Monte Carlo simulations in a high-fidelity environment demonstrate that the proposed method achieves a 91% reduction in prediction Root Mean Square Error (RMSE), reducing the error from approximately 170 m to 15 m during a 40-second communication outage. These results demonstrate that VHD can maintain robust state estimation performance even under complete communication loss.

cs.RO↗

arXiv2025

An Overview of Algorithms for Contactless Cardiac Feature Extraction from Radar Signals: Advances and Challenges

Contactless cardiac monitoring has vast potential to replace contact-based monitoring in various future scenarios such as smart home and in-cabin monitoring. Various contactless sensors can be potentially implemented for cardiac monitoring, such as cameras, acoustic sensors, Wi-Fi routers and radars. Among all these sensors, radar could achieve unobtrusive monitoring with high accuracy and robustness at the same time. The research about radar-based cardiac monitoring can be generally divided into the radar architecture design and signal-processing parts, where the former has been thoroughly reviewed in the literature but not the latter. To the best of the author knowledge, this is the first review paper that focuses on elaborating the algorithms for extracting cardiac features from the received radar signal. In addition, a new taxonomy is proposed to reveal the core feature of each algorithm, with the pros and cons evaluated in detail. Furthermore, the public datasets containing the received radar signal and ground-truth cardiac feature signal are listed with detailed configurations, and the corresponding evaluations may help the researchers select the suitable dataset. At last, several unsolved challenges and future directions are suggested and discussed in detail to encourage future research on solving the main obstacles in this field. In summary, this review can be served as a guide for researchers and practitioners to quickly understand the research trend and recent development of the cardiac feature extraction algorithms, and it is worth further investigating the relative area based on the proposed challenges and future directions.

eess.SP↗

arXiv2025

Crucial-Diff: A Unified Diffusion Model for Crucial Image and Annotation Synthesis in Data-scarce Scenarios

The scarcity of data in various scenarios, such as medical, industry and autonomous driving, leads to model overfitting and dataset imbalance, thus hindering effective detection and segmentation performance. Existing studies employ the generative models to synthesize more training samples to mitigate data scarcity. However, these synthetic samples are repetitive or simplistic and fail to provide "crucial information" that targets the downstream model's weaknesses. Additionally, these methods typically require separate training for different objects, leading to computational inefficiencies. To address these issues, we propose Crucial-Diff, a domain-agnostic framework designed to synthesize crucial samples. Our method integrates two key modules. The Scene Agnostic Feature Extractor (SAFE) utilizes a unified feature extractor to capture target information. The Weakness Aware Sample Miner (WASM) generates hard-to-detect samples using feedback from the detection results of downstream model, which is then fused with the output of SAFE module. Together, our Crucial-Diff framework generates diverse, high-quality training data, achieving a pixel-level AP of 83.63% and an F1-MAX of 78.12% on MVTec. On polyp dataset, Crucial-Diff reaches an mIoU of 81.64% and an mDice of 87.69%. Code is publicly available at https://github.com/JJessicaYao/Crucial-diff.

cs.CV↗

arXiv2025

A Joint Topology-Data Fusion Graph Network for Robust Traffic Speed Prediction with Data Anomalism

Accurate traffic prediction is essential for Intelligent Transportation Systems (ITS), yet current methods struggle with the inherent complexity and non-linearity of traffic dynamics, making it difficult to integrate spatial and temporal characteristics. Furthermore, existing approaches use static techniques to address non-stationary and anomalous historical data, which limits adaptability and undermines data smoothing. To overcome these challenges, we propose the Graph Fusion Enhanced Network (GFEN), an innovative framework for network-level traffic speed prediction. GFEN introduces a novel topological spatiotemporal graph fusion technique that meticulously extracts and merges spatial and temporal correlations from both data distribution and network topology using trainable methods, enabling the modeling of multi-scale spatiotemporal features. Additionally, GFEN employs a hybrid methodology combining a k-th order difference-based mathematical framework with an attention-based deep learning structure to adaptively smooth historical observations and dynamically mitigate data anomalies and non-stationarity. Extensive experiments demonstrate that GFEN surpasses state-of-the-art methods by approximately 6.3% in prediction accuracy and exhibits convergence rates nearly twice as fast as recent hybrid models, confirming its superior performance and potential to significantly enhance traffic prediction system efficiency.

cs.LG↗

arXiv2025

From High-SNR Radar Signal to ECG: A Transfer Learning Model with Cardio-Focusing Algorithm for Scenarios with Limited Data

Electrocardiogram (ECG), as a crucial find-grained cardiac feature, has been successfully recovered from radar signals in the literature, but the performance heavily relies on the high-quality radar signal and numerous radar-ECG pairs for training, restricting the applications in new scenarios due to data scarcity. Therefore, this work will focus on radar-based ECG recovery in new scenarios with limited data and propose a cardio-focusing and -tracking (CFT) algorithm to precisely track the cardiac location to ensure an efficient acquisition of high-quality radar signals. Furthermore, a transfer learning model (RFcardi) is proposed to extract cardio-related information from the radar signal without ECG ground truth based on the intrinsic sparsity of cardiac features, and only a few synchronous radar-ECG pairs are required to fine-tune the pre-trained model for the ECG recovery. The experimental results reveal that the proposed CFT can dynamically identify the cardiac location, and the RFcardi model can effectively generate faithful ECG recoveries after using a small number of radar-ECG pairs for training. The code and dataset are available after the publication.

eess.SP↗

arXiv2025

HiGarment: Cross-modal Harmony Based Diffusion Model for Flat Sketch to Realistic Garment Image

Diffusion-based garment synthesis tasks primarily focus on the design phase in the fashion domain, while the garment production process remains largely underexplored. To bridge this gap, we introduce a new task: Flat Sketch to Realistic Garment Image (FS2RG), which generates realistic garment images by integrating flat sketches and textual guidance. FS2RG presents two key challenges: 1) fabric characteristics are solely guided by textual prompts, providing insufficient visual supervision for diffusion-based models, which limits their ability to capture fine-grained fabric details; 2) flat sketches and textual guidance may provide conflicting information, requiring the model to selectively preserve or modify garment attributes while maintaining structural coherence. To tackle this task, we propose HiGarment, a novel framework that comprises two core components: i) a multi-modal semantic enhancement mechanism that enhances fabric representation across textual and visual modalities, and ii) a harmonized cross-attention mechanism that dynamically balances information from flat sketches and text prompts, allowing controllable synthesis by generating either sketch-aligned (image-biased) or text-guided (text-biased) outputs. Furthermore, we collect Multi-modal Detailed Garment, the largest open-source dataset for garment generation. Experimental results and user studies demonstrate the effectiveness of HiGarment in garment synthesis. The code and dataset are available at https://github.com/Maple498/HiGarment.

cs.CV↗

arXiv2025

Mozualization: Crafting Music and Visual Representation with Multimodal AI

In this work, we introduce Mozualization, a music generation and editing tool that creates multi-style embedded music by integrating diverse inputs, such as keywords, images, and sound clips (e.g., segments from various pieces of music or even a playful cat's meow). Our work is inspired by the ways people express their emotions -- writing mood-descriptive poems or articles, creating drawings with warm or cool tones, or listening to sad or uplifting music. Building on this concept, we developed a tool that transforms these emotional expressions into a cohesive and expressive song, allowing users to seamlessly incorporate their unique preferences and inspirations. To evaluate the tool and, more importantly, gather insights for its improvement, we conducted a user study involving nine music enthusiasts. The study assessed user experience, engagement, and the impact of interacting with and listening to the generated music.

cs.HC↗

arXiv2025

Supervised Visual Docking Network for Unmanned Surface Vehicles Using Auto-labeling in Real-world Water Environments

Unmanned Surface Vehicles (USVs) are increasingly applied to water operations such as environmental monitoring and river-map modeling. It faces a significant challenge in achieving precise autonomous docking at ports or stations, still relying on remote human control or external positioning systems for accuracy and safety which limits the full potential of human-out-of-loop deployment for USVs.This paper introduces a novel supervised learning pipeline with the auto-labeling technique for USVs autonomous visual docking. Firstly, we designed an auto-labeling data collection pipeline that appends relative pose and image pair to the dataset. This step does not require conventional manual labeling for supervised learning. Secondly, the Neural Dock Pose Estimator (NDPE) is proposed to achieve relative dock pose prediction without the need for hand-crafted feature engineering, camera calibration, and peripheral markers. Moreover, The NDPE can accurately predict the relative dock pose in real-world water environments, facilitating the implementation of Position-Based Visual Servo (PBVS) and low-level motion controllers for efficient and autonomous docking.Experiments show that the NDPE is robust to the disturbance of the distance and the USV velocity. The effectiveness of our proposed solution is tested and validated in real-world water environments, reflecting its capability to handle real-world autonomous docking tasks.

cs.RO↗

arXiv2025

Communication Strategy on Macro-and-Micro Traffic State in Cooperative Deep Reinforcement Learning for Regional Traffic Signal Control

Adaptive Traffic Signal Control (ATSC) has become a popular research topic in intelligent transportation systems. Regional Traffic Signal Control (RTSC) using the Multi-agent Deep Reinforcement Learning (MADRL) technique has become a promising approach for ATSC due to its ability to achieve the optimum trade-off between scalability and optimality. Most existing RTSC approaches partition a traffic network into several disjoint regions, followed by applying centralized reinforcement learning techniques to each region. However, the pursuit of cooperation among RTSC agents still remains an open issue and no communication strategy for RTSC agents has been investigated. In this paper, we propose communication strategies to capture the correlation of micro-traffic states among lanes and the correlation of macro-traffic states among intersections. We first justify the evolution equation of the RTSC process is Markovian via a system of store-and-forward queues. Next, based on the evolution equation, we propose two GAT-Aggregated (GA2) communication modules--GA2-Naive and GA2-Aug to extract both intra-region and inter-region correlations between macro and micro traffic states. While GA2-Naive only considers the movements at each intersection, GA2-Aug also considers the lane-changing behavior of vehicles. Two proposed communication modules are then aggregated into two existing novel RTSC frameworks--RegionLight and Regional-DRL. Experimental results demonstrate that both GA2-Naive and GA2-Aug effectively improve the performance of existing RTSC frameworks under both real and synthetic scenarios. Hyperparameter testing also reveals the robustness and potential of our communication modules in large-scale traffic networks.

cs.MA↗

arXiv2024

CNC: Cross-modal Normality Constraint for Unsupervised Multi-class Anomaly Detection

Existing unsupervised distillation-based methods rely on the differences between encoded and decoded features to locate abnormal regions in test images. However, the decoder trained only on normal samples still reconstructs abnormal patch features well, degrading performance. This issue is particularly pronounced in unsupervised multi-class anomaly detection tasks. We attribute this behavior to over-generalization(OG) of decoder: the significantly increasing diversity of patch patterns in multi-class training enhances the model generalization on normal patches, but also inadvertently broadens its generalization to abnormal patches. To mitigate OG, we propose a novel approach that leverages class-agnostic learnable prompts to capture common textual normality across various visual patterns, and then apply them to guide the decoded features towards a normal textual representation, suppressing over-generalization of the decoder on abnormal patterns. To further improve performance, we also introduce a gated mixture-of-experts module to specialize in handling diverse patch patterns and reduce mutual interference between them in multi-class training. Our method achieves competitive performance on the MVTec AD and VisA datasets, demonstrating its effectiveness.

cs.CV↗

arXiv2024

VMGNet: A Low Computational Complexity Robotic Grasping Network Based on VMamba with Multi-Scale Feature Fusion

While deep learning-based robotic grasping technology has demonstrated strong adaptability, its computational complexity has also significantly increased, making it unsuitable for scenarios with high real-time requirements. Therefore, we propose a low computational complexity and high accuracy model named VMGNet for robotic grasping. For the first time, we introduce the Visual State Space into the robotic grasping field to achieve linear computational complexity, thereby greatly reducing the model's computational cost. Meanwhile, to improve the accuracy of the model, we propose an efficient and lightweight multi-scale feature fusion module, named Fusion Bridge Module, to extract and fuse information at different scales. We also present a new loss function calculation method to enhance the importance differences between subtasks, improving the model's fitting ability. Experiments show that VMGNet has only 8.7G Floating Point Operations and an inference time of 8.1 ms on our devices. VMGNet also achieved state-of-the-art performance on the Cornell and Jacquard public datasets. To validate VMGNet's effectiveness in practical applications, we conducted real grasping experiments in multi-object scenarios, and VMGNet achieved an excellent performance with a 94.4% success rate in real-world grasping tasks. The video for the real-world robotic grasping experiments is available at https://youtu.be/S-QHBtbmLc4.

cs.RO↗

arXiv2024

A Novel Approach to Grasping Control of Soft Robotic Grippers based on Digital Twin

This paper has proposed a Digital Twin (DT) framework for real-time motion and pose control of soft robotic grippers. The developed DT is based on an industrial robot workstation, integrated with our newly proposed approach for soft gripper control, primarily based on computer vision, for setting the driving pressure for desired gripper status in real-time. Knowing the gripper motion, the gripper parameters (e.g. curvatures and bending angles, etc.) are simulated by kinematics modelling in Unity 3D, which is based on four-piecewise constant curvature kinematics. The mapping in between the driving pressure and gripper parameters is achieved by implementing OpenCV based image processing algorithms and data fitting. Results show that our DT-based approach can achieve satisfactory performance in real-time control of soft gripper manipulation, which can satisfy a wide range of industrial applications.

cs.RO↗

arXiv2024

radarODE-MTL: A Multi-Task Learning Framework with Eccentric Gradient Alignment for Robust Radar-Based ECG Reconstruction

Millimeter-wave radar is promising to provide robust and accurate vital sign monitoring in an unobtrusive manner. However, the radar signal might be distorted in propagation by ambient noise or random body movement, ruining the subtle cardiac activities and destroying the vital sign recovery. In particular, the recovery of electrocardiogram (ECG) signal heavily relies on the deep-learning model and is sensitive to noise. Therefore, this work creatively deconstructs the radar-based ECG recovery into three individual tasks and proposes a multi-task learning (MTL) framework, radarODE-MTL, to increase the robustness against consistent and abrupt noises. In addition, to alleviate the potential conflicts in optimizing individual tasks, a novel multi-task optimization strategy, eccentric gradient alignment (EGA), is proposed to dynamically trim the task-specific gradients based on task difficulties in orthogonal space. The proposed radarODE-MTL with EGA is evaluated on the public dataset with prominent improvements in accuracy, and the performance remains consistent under noises. The experimental results indicate that radarODE-MTL could reconstruct accurate ECG signals robustly from radar signals and imply the application prospect in real-life situations. The code is available at: http://github.com/ZYY0844/radarODE-MTL.

eess.SP↗

arXiv2024

NanoMVG: USV-Centric Low-Power Multi-Task Visual Grounding based on Prompt-Guided Camera and 4D mmWave Radar

Recently, visual grounding and multi-sensors setting have been incorporated into perception system for terrestrial autonomous driving systems and Unmanned Surface Vehicles (USVs), yet the high complexity of modern learning-based visual grounding model using multi-sensors prevents such model to be deployed on USVs in the real-life. To this end, we design a low-power multi-task model named NanoMVG for waterway embodied perception, guiding both camera and 4D millimeter-wave radar to locate specific object(s) through natural language. NanoMVG can perform both box-level and mask-level visual grounding tasks simultaneously. Compared to other visual grounding models, NanoMVG achieves highly competitive performance on the WaterVG dataset, particularly in harsh environments and boasts ultra-low power consumption for long endurance.

cs.CV↗

arXiv2024

radarODE: An ODE-Embedded Deep Learning Model for Contactless ECG Reconstruction from Millimeter-Wave Radar

Radar-based contactless cardiac monitoring has become a popular research direction recently, but the fine-grained electrocardiogram (ECG) signal is still hard to reconstruct from millimeter-wave radar signal. The key obstacle is to decouple the cardiac activities in the electrical domain (i.e., ECG) from that in the mechanical domain (i.e., heartbeat), and most existing research only uses pure data-driven methods to map such domain transformation as a black box. Therefore, this work first proposes a signal model for domain transformation, and then a novel deep learning framework called radarODE is designed to fuse the temporal and morphological features extracted from radar signals and generate ECG. In addition, ordinary differential equations are embedded in radarODE as a decoder to provide morphological prior, helping the convergence of the model training and improving the robustness under body movements. After being validated on the dataset, the proposed radarODE achieves better performance compared with the benchmark in terms of missed detection rate, root mean square error, Pearson correlation coefficient with the improvement of 9%, 16% and 19%, respectively. The validation results imply that radarODE is capable of recovering ECG signals from radar signals with high fidelity and can be potentially implemented in real-life scenarios.

eess.SP↗

arXiv2024

MVG-Splatting: Multi-View Guided Gaussian Splatting with Adaptive Quantile-Based Geometric Consistency Densification

In the rapidly evolving field of 3D reconstruction, 3D Gaussian Splatting (3DGS) and 2D Gaussian Splatting (2DGS) represent significant advancements. Although 2DGS compresses 3D Gaussian primitives into 2D Gaussian surfels to effectively enhance mesh extraction quality, this compression can potentially lead to a decrease in rendering quality. Additionally, unreliable densification processes and the calculation of depth through the accumulation of opacity can compromise the detail of mesh extraction. To address this issue, we introduce MVG-Splatting, a solution guided by Multi-View considerations. Specifically, we integrate an optimized method for calculating normals, which, combined with image gradients, helps rectify inconsistencies in the original depth computations. Additionally, utilizing projection strategies akin to those in Multi-View Stereo (MVS), we propose an adaptive quantile-based method that dynamically determines the level of additional densification guided by depth maps, from coarse to fine detail. Experimental evidence demonstrates that our method not only resolves the issues of rendering quality degradation caused by depth discrepancies but also facilitates direct mesh extraction from dense Gaussian point clouds using the Marching Cubes algorithm. This approach significantly enhances the overall fidelity and accuracy of the 3D reconstruction process, ensuring that both the geometric details and visual quality.

cs.CV↗

arXiv2024

Talk2Radar: Bridging Natural Language with 4D mmWave Radar for 3D Referring Expression Comprehension

Embodied perception is essential for intelligent vehicles and robots in interactive environmental understanding. However, these advancements primarily focus on vision, with limited attention given to using 3D modeling sensors, restricting a comprehensive understanding of objects in response to prompts containing qualitative and quantitative queries. Recently, as a promising automotive sensor with affordable cost, 4D millimeter-wave radars provide denser point clouds than conventional radars and perceive both semantic and physical characteristics of objects, thereby enhancing the reliability of perception systems. To foster the development of natural language-driven context understanding in radar scenes for 3D visual grounding, we construct the first dataset, Talk2Radar, which bridges these two modalities for 3D Referring Expression Comprehension (REC). Talk2Radar contains 8,682 referring prompt samples with 20,558 referred objects. Moreover, we propose a novel model, T-RadarNet, for 3D REC on point clouds, achieving State-Of-The-Art (SOTA) performance on the Talk2Radar dataset compared to counterparts. Deformable-FPN and Gated Graph Fusion are meticulously designed for efficient point cloud feature modeling and cross-modal fusion between radar and text features, respectively. Comprehensive experiments provide deep insights into radar-based 3D REC. We release our project at https://github.com/GuanRunwei/Talk2Radar.

cs.RO↗