arXiv subjects

Enrico Negro

Publications and source records attributed to Enrico Negro.

14 recordsLinked to original sources

arXiv2018

Reduced-Graphene-Oxide with Dispersed Au-Ir Nanoparticles as Active Support for Pt at low Loadding for Electrocatalytic Oxygen Electroreduction

We report here on a novel and facile techniques for the synthesis nanocomposite based on stable bimetallic catalyst containing iridium and gold nanoparticles electrodeposited on chemically reduced graphene oxide (rGO) sheet admixed with platinum nanoparticles as an efficient electrocatalyst to facilitate the oxygen reduction reaction (ORR) in acidic medium. Raman spectroscopy, infrared spectroscopy (IR), scanning electron microscope (SEM), transmission electron microscope (TEM) methods were employed to characterize the rGO, Au-NPS-rGO, Ir-NPS-rGO, Au-Ir-rGO nanocomposites formed on the electrode surface. Here we present a comparative study into the relative effects of each hybrid nanocomposites: Au-NPS-rGO, Ir-NPS-rGO, Au-Ir-rGO nanocomposites on the performance of platinum nanoparticles towards the oxygen reduction reaction (ORR) in acidic media. For the purposes of comparing the supports, a simple platinum black catalyst is used and the performance isevaluated via direct measurement of peroxide by rotating ring-disk electrode (RRDE) to determine the number of electrons (n) transferred in the ORR. It was found that platinum nanoparticles dispersed within Au-Ir-rGO support follows a quasi 4-electron mechanism (3.99-4 electrons involved) due to that the ORR takes place mainly on the active Pt particles, and produced hydrogen peroxide is reduced at Au-Ir-rGO support.

physics.app-ph↗

arXiv2018

Evaluation of Reduced-Graphene-Oxide Aligned with WO3-Nanorods as Support for Pt Nanoparticles during Oxygen Electroreduction in Acid Medium

Hybrid supports composed of chemically-reduced graphene-oxide-aligned with tungsten oxide nanowires are considered here as active carriers for dispersed platinum with an ultimate goal of producing improved catalysts for electroreduction of oxygen in acid medium. Here WO3 nanostructures are expected to be attached mainly to the edges of graphene thus making the hybrid structure not only highly porous but also capable of preventing graphene stacking and creating numerous sites for the deposition of Pt nanoparticles. Comparison has been made to the analogous systems utilizing neither reduced graphene oxide nor tungsten oxide component. By over-coating the reduced-graphene-oxide support with WO3 nanorods, the electrocatalytic activity of the system toward the reduction of oxygen in acid medium has been enhanced even at the low Pt loading of 30 microg cm-2. The RRDE data are consistent with decreased formation of hydrogen peroxide in the presence of WO3. Among important issues are such features of the oxide as porosity, large population of hydroxyl groups, high Broensted acidity, as well as fast electron transfers coupled to unimpeded proton displacements. The conclusions are supported with mechanistic and kinetic studies involving double-potential-step chronocoulometry as an alternative diagnostic tool to rotating ring-disk voltammetry.

physics.app-ph↗

arXiv2018

Development of nanostructured-graphene-supported silver nanoparticles as catalysts for electroreduction of oxygen in alkaline electrolyte

Here we develop a class off face centred cubic structure of metallic silver nanocrystals, to enable high ORR activity process. Silver nanoparticles deposited within different carbon supports: carboxylated-graphene, SiO2-doted reduced- graphene-oxide (Gr/SiO2) and reduced-graphene-oxide (Gr) were prepared. The reduction of silver ions and the formation of silver nanoparticles deposited within graphene-type supports have been assessed by UV-Vis spectroscopy and was confirmed by XRD studies. The major advantage of the proposed chemical synthetic method is the integration of the superb properties of both silver nanoparticles and graphene supports in a single-step synthesis with a 100% usage of the silver precursor (AgNO3). The choice of the carbon support strongly affected catalytic activity of the resulting Ag nanoparticles towards oxygen electroreduction in alkaline medium. We show that SiO2-doted reduced- graphene-oxide supported silver nanoparticles display significantly enhanced catalytic activity towards the oxygen reduction reaction (ORR) in alkaline solutions compared to the silver nanoparticles immobilized within carboxylated-graphene support and chemically reduced graphene oxide (Gr). Moreover under RRDE conditions the hybrid material based on SiO2-doted reduced- graphene-oxide supported silver nanoparticles displays the most impressive electrocatalytic performance toward ORR and shows the highest number of exchanged electrons (n) ranging from 3.96 to 3.998 when compared to the silver nanoparticles immobilized within carboxylated-graphene support (3.90-3.994) and reduced-graphene-oxide (Gr) supported silver nanoparticles (3.88-3.991).

physics.chem-ph↗

arXiv2018

Low-Noble-Metal-Loading Hybrid Catalytic System for Oxygen Reduction Utilizing Reduced-Graphene-Oxide-Supported-Platinum Aligned with Carbon-Nanotube-Supported Iridium

Hybrid systems composed of the reduced graphene oxide-supported platinum and multiwall carbon nanotubes-supported iridium (both noble metals utilized at low loadings on the level of 15 and < 5 microg cm-2, respectively) have been considered as catalytic materials for the reduction of oxygen in acid media (0.5 mol dm-3 H2SO4). The electrocatalytic activity toward reduction of oxygen and formation of hydrogen peroxide intermediate have been tested using rotating ring-disk electrode voltammetric experiments. The efficiency of the proposed catalytic systems has also been addressed by performing galvanodynamic measurements with gas diffusion electrode half-cell at 80 °C. The role of carbon nanotubes is to improve charge distribution at the electrocatalytic interface and facilitate the transport of oxygen and electrolyte in the catalytic systems by lowering the extent of reduced graphene oxide restacking during solvent evaporation. The diagnostic electrochemical experiments reveal that at iridium-containing systems not only higher disk currents, but also much smaller ring currents have been produced (compared to reduced graphene oxide-supported platinum and its composite with bare carbon nanotubes), clearly implying formation of lower amounts of the undesirable hydrogen peroxide intermediate. The enhancement effect coming from the addition of traces of iridium (supported onto carbon nanotubes) to Pt, utilized at low loading, may originate from the high ability of Ir to induce decomposition of the undesirable hydrogen peroxide intermediate. There is a competition between activation (due to the presence of small amounts of Ir) and dilution (by carbon nanotubes) of Pt active centers in hybrid systems, therefore special attention is paid to the adjustment of their composition.

cond-mat.mtrl-sci↗

arXiv2018

Graphene-Supported Silver-Iron Carbon Nitride Derived from Thermal Decomposition of Silver Hexacyanoferrate as Effective Electrocatalyst for the Oxygen Reduction Reaction in Alkaline Media

Silver-iron carbon nitride has been obtained by pyrolysis (under inert atmosphere) of silver hexacyanoferrate(II), precipitated on graphene nanoplatelets, and examined as electrocatalyst for oxygen reduction reaction in alkaline media in comparison to silver nanoparticles and iron carbon nitride (prepared separately in a similar manner on graphene nanoplatelets). The catalytic materials have been studied in 0.1 M potassium hydroxide electrolyte using such electrochemical diagnostic techniques as cyclic voltammetry and rotating ring-disk electrode voltammetry. Upon application of graphene nanoplateletssupported mixed silver-iron carbon nitride catalyst, the reduction of oxygen proceeds at more positive potentials and the amounts of hydrogen peroxide (generated during reduction of oxygen at potentials more positive than 0.3 V) are lower relative to silver nanoparticles and iron carbon nitride (supported on graphene nanoplatelets) examined separately. Promoting effect is ascribed to high activity of silver toward the reduction/decomposition of H2O2 in basic medium. Additionally, it has been observed that the systems based on carbon nitrides show considerable stability due to strong fixation of metal complexes to CN shells.

physics.chem-ph↗

arXiv2018

Graphene-Supported Au-Ni Carbon Nitride Electrocatalysts for the ORR in Alkaline Environment

This study reports the preparation and characterization of a new family of electrocatalysts (ECs) for the oxygen reduction reaction (ORR) exhibiting a 'core-shell' morphology. The 'core' consists of graphene sheets, which are covered by a carbon nitride (CN) 'shell' embedding Au and Ni active sites. The investigated ECs are labeled AuNi10-CNl 600/Gr and AuNi10-CNl 900/Gr. The chemical composition and thermal stability are studied by inductively-coupled plasma atomic emission spectroscopy (ICPAES), elemental analysis and by high-resolution thermogravimetric analysis (HR-TGA). The morphology of the ECs is probed by scanning electron microscopy (SEM), highresolution transmission electron microscopy (HR-TEM) and powder X-ray diffraction (XRD). The ORR performance of the ECs is studied both in acid (0.1 M HClO4) and in alkaline medium (0.1 M KOH) by Cyclic Voltammetry with the Thin-Film Rotating Ring-Disk Electrode (CV-TF-RRDE) method. Both ECs exhibit a promising performance in the ORR in the alkaline medium.

physics.chem-ph↗

arXiv2018

(Co, Ni)Sn0.5 nanoparticles supported on hierarchical CN-graphene-based electrocatalysts for the oxygen reduction reaction

The synthesis of new 'Pt-free' electrocatalysts (ECs) for the oxygen reduction reaction (ORR) is reported. The ECs are characterized by a hierarchical 'core-shell' morphology; the 'core' is made of graphene, that is covered by a cratered, microporous carbon nitride (CN) 'shell'. The latter supports nanoparticles of M1 and Sn metals (M1 = Co; Ni) in 'coordination nests'. These latter are holes in the CN matrix, whose walls consist of N- and C-ligands. Two groups of ECs are studied: (i) 'pristine' ECs; and (ii) 'activated' ECs, that are obtained from the 'pristine' ECs by means of a suitable activation process (A) aimed at improving the performance in the ORR. Here is clarified the interplay existent between: (i) the chemical composition, morphology, structure and A; and (ii) the ORR performance and mechanism as a function of the pH of the environment. The resulting insights improve the fundamental understanding of this family of ECs and open the door to the devising of new preparations of 'Pt-free' ECs for the ORR, which: (i) are stabilized by a CN matrix and; (ii) exhibit an improved performance.

physics.chem-ph↗

arXiv2018

Fe-carbon nitride 'Core-shell' electrocatalysts for the oxygen reduction reaction

In this report, the preparation of Fe-carbon nitride (CN)-based electrocatalysts (ECs) with a 'core-shell' morphology for the oxygen reduction reaction (ORR) is described. The ECs consist of spherical XC-72R carbon nanoparticles, the 'cores', that are covered by a CN matrix, the 'shell', embedding Fe species in 'coordination nests'. The latter is formed by the presence of carbon and nitrogen ligands on the surface of the CN matrix, the 'shell'. Two families of CN-based ECs are prepared, which are grouped on the basis of the concentration of N atoms in the CN 'shell'. Each group comprises of both a 'pristine' and an 'activated' EC; the latter is obtained from the 'pristine' EC by a suitable series of treatments (A) devised to improve the ORR performance. The chemical composition of the CN-based ECs is determined by Inductively-Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and microanalysis. The surface area of the CN-based ECs is determined by nitrogen physisorption techniques, and the surface composition is probed by X-ray Photoelectron Spectroscopy (XPS). The electrochemical performance and reaction mechanism of the CN-based ECs in the ORR is investigated in both acid and alkaline environments by cyclic voltammetry with the Thin-Film Rotating Ring-Disk Electrode setup (CV-TF-RRDE). The influence of the preparation parameters and of the treatments on the physicochemical properties, the ORR performance, and reaction mechanism is studied in detail. In the alkaline environment the FeFe2-CNl 900/CA 'core-shell' EC shows a remarkable ORR onset potential of 0.908 V vs. RHE which, with respect to the value of 0.946 V vs. RHE of the Pt/C ref., classifies the proposed materials as very promising 'Platinum Group Metal-free' ECs for the ORR.

physics.chem-ph↗

arXiv2018

Oxygen reduction reaction electrocatalysts based on FeSn0.5 species embedded in hierarchical CN-graphene based supports

This work reports the synthesis, the physicochemical characterization and the electrochemical studies of new electrocatalysts (ECs) for the oxygen reduction reaction (ORR) that: (i) are based on a hierarchical graphene-based support; and (ii) do not comprise platinum. The active sites of the ECs consist of Fe and Sn species stabilized in 'coordination nests' of a carbon nitride (CN) matrix. The latter exhibits a rough, microporous morphology and acts as a 'shell' covering a graphene 'core'. This paper: (i) discusses the role played by Fe as the 'active metal' in this family of ECs; and (ii) examines in detail how the physicochemical properties and, correspondingly, the electrochemical performance are affected by a suitable activation procedure A meant to boost the ORR kinetics. The results lead to an improved fundamental understanding on the features of the active sites, including the impact of both A and the pH of the environment in their performance and ORR mechanism. These insights clarify the most desirable features to be included in high-performing ECs belonging to this family, paving the way to the synthesis of next-generation, efficient ECs for the ORR that do not comprise platinum.

physics.chem-ph↗

arXiv2018

Unravelling of the chemistry and the performance in the oxygen reduction reaction of carbon nitride-supported bimetallic electrocatalysts through X-ray photoelectron spectroscopy

Five bimetallic electrocatalysts (ECs) including a carbon nitride (CN) support are synthesised through the pyrolysis of a solid precursor obtained through sol-gel and gel-plastic processes. The resulting ECs are characterised through ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectroscopy) and XPS (X-ray Photoelectron spectroscopy); their performance and reaction mechanism in the oxygen reduction reaction (ORR) are evaluated with the CV-TF-RRDE method (Cyclic Voltammetry Thin-Film Rotating Ring-Disk Electrode). Special attention is given to XPS results with the aim to carry out a thorough investigation of the surface concentration and the chemical environments of the different elements, as well as providing information on the structure of the metal components of the ECs and their interactions with the carbon nitride support. The correlation of the results obtained from the chemical analyses, XPS and the electrochemical studies allows to improve the fundamental understanding of the factors controlling the ORR kinetics and reaction pathway in bimetallic CN-supported ECs.

physics.chem-ph↗

arXiv2018

Graphene-Based Nanostructures in Electrocatalytic Oxygen Reduction

Application of graphene-type materials in electrocatalysis is a topic of growing scientific and technological interest. A tremendous amount of research has been carried out in the field of oxygen electroreduction, particularly with respect to potential applications in the fuel cell research also with use of graphene-type catalytic components. This work addresses fundamental aspects and potential applications of graphene structures in the oxygen reduction electrocatalysis. Special attention will be paid to creation of catalytically active sites by using non-metallic heteroatoms as dopants, formation of hierarchical nanostructured electrocatalysts, their long-term stability, and application as supports for dispersed metals (activating interactions).

cond-mat.mtrl-sci↗

arXiv2018

Elucidation of role of graphene in catalytic designs for electroreduction of oxygen

Graphene is, in principle, a promising material for consideration as component (support, active site) of electrocatalytic materials, particularly with respect to reduction of oxygen, an electrode reaction of importance to low-temperature fuel cell technology. Different concepts of utilization, including nanostructuring, doping, admixing, preconditioning, modification or functionalization of various graphene-based systems for catalytic electroreduction of oxygen are elucidated, as well as important strategies to enhance the systems' overall activity and stability are discussed.

cond-mat.mtrl-sci↗

arXiv2018

Evaluation of reduced-graphene-oxide-supported gold nanoparticles as catalytic system for electroreduction of oxygen in alkaline electrolyte

Chemically-reduced graphene-oxide-supported gold nanoparticles are considered here as catalytic materials for the reduction of oxygen in alkaline medium. Gold nanoparticles are prepared by the chemical reduction method, in which the NaBH4-prereduced Keggin-type phosphomolybdate heteropolyblue acts as the reducing agent for the precursor (HAuCl4). Polyoxmetallate (PMo12O403-) capping ligands stabilize gold nanoparticle deposits, facilitate their dispersion and attachment to carbon supports. Indeed, it is apparent from the independent diagnostic voltammetric experiments (in 0.5 mol dm-3 H2SO4) that heteropolymolybdates form readily stable adsorbates on nanostructures of both gold and carbon (reduced graphene oxide and Vulcan). It is reasonable to expect that the polyoxometallate-assisted nucleation of gold has occurred in the proximity of oxygenated defects existing on carbon substrates. Under conditions of electrochemical diagnostic experiments (performed in 0.1 mol dm-3 KOH): (i) the phosphomolybdate adsorbates are removed from the interface as they undergo dissolution in alkaline medium; and (ii) the Au nanoparticles (Au loading, 30 μg cm-2) remain well-dispersed on the carbon as evident from transmission electron microscopy. High electrocatalytic activity of the reduced-graphene oxide-supported Au nanoparticles toward reduction of oxygen in alkaline medium is demonstrated using cyclic and rotating ring-disk voltammetric experiments. Among important issues are possible activating interactions between gold and the support, as well as presence of structural defects existing on poorly organized graphitic structure of reduced graphene oxide (as evident from Raman spectroscopy).

physics.chem-ph↗

arXiv2018

Towards 'Pt-free' Anion-Exchange Membrane Fuel Cells: Fe-Sn Carbon Nitride-Graphene 'Core-Shell' Electrocatalysts for the Oxygen Reduction Reaction

We report on the development of two new Pt-free electrocatalysts (ECs) for the oxygen reduction reaction (ORR) based on graphene nanoplatelets (GNPs). We designed the ECs with a core-shell morphology, where a GNP core support is covered by a carbon nitride (CN) shell. The proposed ECs present ORR active sites that are not associated to nanoparticles of metal/alloy/oxide, but are instead based on Fe and Sn sub-nanometric clusters bound in coordination nests formed by carbon and nitrogen ligands of the CN shell. The performance and reaction mechanism of the ECs in the ORR are evaluated in an alkaline medium by cyclic voltammetry with the thin-film rotating ring-disk approach and confirmed by measurements on gas-diffusion electrodes. The proposed GNP-supported ECs present an ORR overpotential of only ca. 70 mV higher with respect to a conventional Pt/C reference EC including a XC-72R carbon black support. These results make the reported ECs very promising for application in anion-exchange membrane fuel cells. Moreover, our methodology provides an example of a general synthesis protocol for the development of new Pt-free ECs for the ORR having ample room for further performance improvement beyond the state of the art.

physics.chem-ph↗