arXiv subjects

Enrique Gaztañaga

Publications and source records attributed to Enrique Gaztañaga.

At least 91 records · Page 5Linked to original sources

arXiv2022

Target Selection and Validation of DESI Quasars

The Dark Energy Spectroscopic Instrument (DESI) survey will measure large-scale structures using quasars as direct tracers of dark matter in the redshift range 0.9 2.1. We present several methods to select candidate quasars for DESI, using input photometric imaging in three optical bands (g, r, z) from the DESI Legacy Imaging Surveys and two infrared bands (W1, W2) from the Wide-field Infrared Explorer (WISE). These methods were extensively tested during the Survey Validation of DESI. In this paper, we report on the results obtained with the different methods and present the selection we optimized for the DESI main survey. The final quasar target selection is based on a Random Forest algorithm and selects quasars in the magnitude range 16.5 99% purity for a nominal effective exposure time of ~1000s. With a 310 per sq. deg. target density, the main selection allows DESI to select more than 200 QSOs per sq. deg. (including 60 quasars with z>2.1), exceeding the project requirements by 20%. The redshift distribution of the selected quasars is in excellent agreement with quasar luminosity function predictions.

astro-ph.CO↗

arXiv2022

DESI Bright Galaxy Survey: Final Target Selection, Design, and Validation

Over the next five years, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage-IV dark energy galaxy survey. At $z < 0.6$, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the Universe during the dark energy dominated epoch with redshifts of >10 million galaxies over 14,000 deg$^2$. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target a $r < 19.5$ magnitude-limited sample (BGS Bright); a fainter $19.5 < r < 20.175$ sample, color-selected to have high redshift efficiency (BGS Faint); and a smaller low-z quasar sample. BGS will observe these targets using exposure times, scaled to achieve uniform completeness, and visit each point on the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with realistic simulations to show that BGS can complete its strategy and make optimal use of `bright' time. We demonstrate that BGS targets have stellar contamination <1% and that their densities do not depend strongly on imaging properties. We also confirm that BGS Bright will achieve >80% fiber assignment efficiency. Finally, we show that BGS Bright and Faint will achieve >95% redshift success rates with no significant dependence on observing conditions. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise Baryon Acoustic Oscillations and Redshift-Space Distortions measurements at $z < 0.4$. It also presents opportunities to exploit new methods that require highly complete and dense galaxy samples (e.g. N-point statistics, multi-tracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter.

astro-ph.CO↗

arXiv2022

The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI)

A system of 5,020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically re-target their optical fibers every 10 - 20 minutes, each to a precision of several microns, with a reconfiguration time less than 2 minutes. Over the next five years, they will enable the newly-constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5,020 robotic positioners and optical fibers, DESI's Focal Plane System includes 6 guide cameras, 4 wavefront cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multi-object, fiber-fed spectrographs.

astro-ph.IM↗

arXiv2022

New catalogue of dark-matter halo properties identified in MICE-GC -- I. Analysis of density profile distributions

Constraints on dark matter halo masses from weak gravitational lensing can be improved significantly by using additional information about the morphology of their density distribution, leading to tighter cosmological constraints derived from the halo mass function. This work is the first of two in which we investigate the accuracy of halo morphology and mass measurements in 2D and 3D. To this end, we determine several halo physical properties in the MICE-Grand Challenge dark matter only simulation. We present a public catalogue of these properties that includes density profiles and shape parameters measured in 2D and 3D, the halo centre at the peak of the 3D density distribution as well as the gravitational and kinetic energies and angular momentum vectors. The density profiles are computed using spherical and ellipsoidal radial bins, taking into account the halo shapes. We also provide halo concentrations and masses derived from fits to 2D and 3D density profiles using NFW and Einasto models for halos with more than $1000$ particles ($\gtrsim 3 \times 10^{13} h^{-1} M_{\odot}$). We find that the Einasto model provides better fits compared to NFW, regardless of the halo relaxation state and shape. The mass and concentration parameters of the 3D density profiles derived from fits to the 2D profiles are in general biased. Similar biases are obtained when constraining mass and concentrations using a weak-lensing stacking analysis. We show that these biases depend on the radial range and density profile model adopted in the fitting procedure, but not on the halo shape.

astro-ph.CO↗

arXiv2022

Cosmology Intertwined: A Review of the Particle Physics, Astrophysics, and Cosmology Associated with the Cosmological Tensions and Anomalies

In this paper we will list a few important goals that need to be addressed in the next decade, also taking into account the current discordances between the different cosmological probes, such as the disagreement in the value of the Hubble constant $H_0$, the $σ_8$--$S_8$ tension, and other less statistically significant anomalies. While these discordances can still be in part the result of systematic errors, their persistence after several years of accurate analysis strongly hints at cracks in the standard cosmological scenario and the necessity for new physics or generalisations beyond the standard model. In this paper, we focus on the $5.0\,σ$ tension between the {\it Planck} CMB estimate of the Hubble constant $H_0$ and the SH0ES collaboration measurements. After showing the $H_0$ evaluations made from different teams using different methods and geometric calibrations, we list a few interesting new physics models that could alleviate this tension and discuss how the next decade's experiments will be crucial. Moreover, we focus on the tension of the {\it Planck} CMB data with weak lensing measurements and redshift surveys, about the value of the matter energy density $Ω_m$, and the amplitude or rate of the growth of structure ($σ_8,fσ_8$). We list a few interesting models proposed for alleviating this tension, and we discuss the importance of trying to fit a full array of data with a single model and not just one parameter at a time. Additionally, we present a wide range of other less discussed anomalies at a statistical significance level lower than the $H_0$--$S_8$ tensions which may also constitute hints towards new physics, and we discuss possible generic theoretical approaches that can collectively explain the non-standard nature of these signals.[Abridged]

astro-ph.CO↗

arXiv2022

A measurement of the scale of homogeneity in the Early Universe

We present the first measurement of the homogeneity index, $\mathcal{H}$, a fractal or Hausdorff dimension of the early Universe from the Planck CMB temperature variations $δT$ in the sky. This characterization of the isotropy scale is model-free and purely geometrical, independent of the amplitude of $δT$. We find evidence of homogeneity ($\mathcal{H}=0$) for scales larger than $θ_{\mathcal{H}} = 65.9 \pm 9.2 °$ on the CMB sky. This finding is at odds with the $Λ$CDM prediction, which assumes a scale invariant infinite universe. Such anomaly is consistent with the well known low quadrupule amplitude in the angular $δT$ spectrum, but quantified in a direct and model independent way. We estimate the significance of our finding for $\mathcal{H}=0$ using a principal component analysis from the sampling variations of the observed sky. This analysis is validated with theoretical prediction of the covariance matrix \textcolor{black}{ and simulations, booth base purely on data or in the $Λ$CDM prediction.} Assuming translation invariance (and flat geometry) we can convert the isotropy scale $θ_\mathcal{H}$ into a (comoving) homogeneity scale which is very close to the trapped surface generated by the observed cosmological constant $Λ$.

astro-ph.CO↗

arXiv2022

The DESI PRObabilistic Value-Added Bright Galaxy Survey (PROVABGS) Mock Challenge

The PRObabilistic Value-Added Bright Galaxy Survey (PROVABGS) catalog will provide measurements of galaxy properties, such as stellar mass ($M_*$), star formation rate (${\rm SFR}$), stellar metallicity ($Z_{\rm MW}$), and stellar age ($t_{\rm age, MW}$), for >10 million galaxies of the DESI Bright Galaxy Survey. Full posterior distributions of the galaxy properties will be inferred using state-of-the-art Bayesian spectral energy distribution (SED) modeling of DESI spectroscopy and Legacy Surveys photometry. In this work, we present the SED model, Bayesian inference framework, and methodology of PROVABGS. Furthermore, we apply the PROVABGS SED modeling on realistic synthetic DESI spectra and photometry, constructed using the L-GALAXIES semi-analytic model. We compare the inferred galaxy properties to the true galaxy properties of the simulation using a hierarchical Bayesian framework to quantify accuracy and precision. Overall, we accurately infer the true $M_*$, ${\rm SFR}$, $Z_{\rm MW}$, and $t_{\rm age, MW}$ of the simulated galaxies. However, the priors on galaxy properties induced by the SED model have a significant impact on the posteriors. They impose a ${\rm SFR}{>}10^{-1} M_\odot/{\rm yr}$ lower bound on ${\rm SFR}$, a ${\sim}0.3$ dex bias on $\log Z_{\rm MW}$ for galaxies with low spectral signal-to-noise, and $t_{\rm age, MW} < 8\,{\rm Gyr}$ upper bound on stellar age. This work also demonstrates that a joint analysis of spectra and photometry significantly improves the constraints on galaxy properties over photometry alone and is necessary to mitigate the impact of the priors. With the methodology presented and validated in this work, PROVABGS will maximize information extracted from DESI observations and provide a probabilistic value-added galaxy catalog that will extend current galaxy studies to new regimes and unlock cutting-edge probabilistic analyses.

astro-ph.GA↗

arXiv2022

Angular clustering properties of the DESI QSO target selection using DR9 Legacy Imaging Surveys

The quasar target selection for the upcoming survey of the Dark Energy Spectroscopic Instrument (DESI) will be fixed for the next five years. The aim of this work is to validate the quasar selection by studying the impact of imaging systematics as well as stellar and galactic contaminants, and to develop a procedure to mitigate them. Density fluctuations of quasar targets are found to be related to photometric properties such as seeing and depth of the Data Release 9 of the DESI Legacy Imaging Surveys. To model this complex relation, we explore machine learning algorithms (Random Forest and Multi-Layer Perceptron) as an alternative to the standard linear regression. Splitting the footprint of the Legacy Imaging Surveys into three regions according to photometric properties, we perform an independent analysis in each region, validating our method using eBOSS EZ-mocks. The mitigation procedure is tested by comparing the angular correlation of the corrected target selection on each photometric region to the angular correlation function obtained using quasars from the Sloan Digital Sky Survey (SDSS)Data Release 16. With our procedure, we recover a similar level of correlation between DESI quasar targets and SDSS quasars in two thirds of the total footprint and we show that the excess of correlation in the remaining area is due to a stellar contamination which should be removed with DESI spectroscopic data. We derive the Limber parameters in our three imaging regions and compare them to previous measurements from SDSS and the 2dF QSO Redshift Survey.

astro-ph.CO↗

arXiv2021

Preliminary clustering properties of the DESI BGS bright targets using DR9 Legacy Imaging Surveys

We characterise the selection cuts and clustering properties of a magnitude-limited sample of bright galaxies that is part of the Bright Galaxy Survey (BGS) of the Dark Energy Spectroscopic Instrument (DESI) using the ninth data release of the Legacy Imaging Surveys (DR9). We describe changes in the DR9 selection compared to the DR8 one as explored in Ruiz-Macias et al. (2021). We also compare the DR9 selection in three distinct regions: BASS/MzLS in the north Galactic Cap (NGC), DECaLS in the NGC, and DECaLS in the south Galactic Cap (SGC). We investigate the systematics associated with the selection and assess its completeness by matching the BGS targets with the Galaxy and Mass Assembly (GAMA) survey. We measure the angular clustering for the overall bright sample (r $\leq$ 19.5) and as function of apparent magnitude and colour. This enables to determine the clustering strength and slope by fitting a power-law model that can be used to generate accurate mock catalogues for this tracer. We use a counts-in-cells technique to explore higher-order statistics and cross-correlations with external spectroscopic data sets in order to check the evolution of the clustering with redshift and the redshift distribution of the BGS targets using clustering-redshifts. While this work validates the properties of the BGS bright targets, the final target selection pipeline and clustering properties of the entire DESI BGS will be fully characterised and validated with the spectroscopic data of Survey Validation.

astro-ph.GA↗

arXiv2021

Characterising the target selection pipeline for the Dark Energy Spectroscopic Instrument Bright Galaxy Survey

We present the steps taken to produce a reliable and complete input galaxy catalogue for the Dark Energy Spectroscopic Instrument (DESI) Bright Galaxy Survey (BGS) using the photometric Legacy Survey DR8 DECam. We analyse some of the main issues faced in the selection of targets for the DESI BGS, such as star-galaxy separation, contamination by fragmented stars and bright galaxies. Our pipeline utilizes a new way to select BGS galaxies using Gaia photometry and we implement geometrical and photometric masks that reduce the number of spurious objects. The resulting catalogue is cross-matched with the Galaxy And Mass Assembly (GAMA) survey to assess the completeness of the galaxy catalogue and the performance of the target selection. We also validate the clustering of the sources in our BGS catalogue by comparing with mock catalogues and the Sloan Digital Sky Survey (SDSS) data. Finally, the robustness of the BGS selection criteria is assessed by quantifying the dependence of the target galaxy density on imaging and other properties. The largest systematic correlation we find is a 7 per cent suppression of the target density in regions of high stellar density.

astro-ph.GA↗

arXiv2021

Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall's Serrurier truss and replaced with the newly-constructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall's primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

astro-ph.IM↗

arXiv2020

Preliminary Target Selection for the DESI Quasar (QSO) Sample

The DESI survey will measure large-scale structure using quasars as direct tracers of dark matter in the redshift range $0.9 2.1$. We present two methods to select candidate quasars for DESI based on imaging in three optical ($g, r, z$) and two infrared ($W1, W2$) bands. The first method uses traditional color cuts and the second utilizes a machine-learning algorithm.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Emission Line Galaxy (ELG) Sample

DESI will precisely constrain cosmic expansion and the growth of structure by collecting $\sim$35 million redshifts across $\sim$80% of cosmic history and one third of the sky to study Baryon Acoustic Oscillations (BAO) and Redshift Space Distortions (RSD). We present a preliminary target selection for an Emission Line Galaxy (ELG) sample, which will comprise about half of all DESI tracers. The selection consists of a $g$-band magnitude cut and a $(g-r)$ vs. $(r-z)$ color box, which we validate using HSC/PDR2 photometric redshifts and DEEP2 spectroscopy. The ELG target density should be $\sim$2400 deg$^{-2}$, with $\sim$65% of ELG redshifts reliably within a redshift range of $0.6<z<1.6$. ELG targeting for DESI will be finalized during a `Survey Validation' phase.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Luminous Red Galaxy (LRG) Sample

The DESI survey will observe more than 8 million candidate luminous red galaxies (LRGs) in the redshift range $0.3<z<1.0$. Here we present a preliminary version of the DESI LRG target selection developed using Legacy Surveys Data Release 8 $g$, $r$, $z$ and $W1$ photometry. This selection yields a sample with a uniform surface density of ${\sim}\,600$ deg$^{-2}$and very low predicted stellar contamination and redshift failure rates. During DESI Survey Validation, updated versions of this selection will be tested and optimized.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Milky Way Survey (MWS)

The DESI Milky Way Survey (MWS) will observe $\ge$8 million stars between $16 < r < 19$ mag, supplemented by observations of brighter targets under poor observing conditions. The survey will permit an accurate determination of stellar kinematics and population gradients; characterize diffuse substructure in the thick disk and stellar halo; enable the discovery of extremely metal-poor stars and other rare stellar types; and improve constraints on the Galaxy's 3D dark matter distribution from halo star kinematics. MWS will also enable a detailed characterization of the stellar populations within 100 pc of the Sun, including a complete census of white dwarfs. The target catalog from the preliminary selection described here is public.

astro-ph.GA↗

arXiv2020

Preliminary Target Selection for the DESI Bright Galaxy Survey (BGS)

The Dark Energy Spectroscopic Instrument (DESI) will execute a nearly magnitude-limited survey of low redshift galaxies ($0.05 \leq z \leq 0.4$, median $z \approx 0.2$). Clustering analyses of this Bright Galaxy Survey (BGS) will yield the most precise measurements to date of baryon acoustic oscillations and redshift-space distortions at low redshift. DESI BGS will comprise two target classes: (i) BRIGHT ($r<19.5$~mag), and (ii) FAINT ($19.5<r<20$~mag). Here we present a summary of the star-galaxy separation, and different photometric and geometrical masks, used in BGS to reduce the number of spurious targets. The selection results in a total density of $\sim 800$ objects/deg$^2$ for the BRIGHT and $\sim 600$ objects/deg$^2$ for the FAINT selections.A full characterization of the BGS selection can be found in Ruiz-Macias et al. (2020).

astro-ph.GA↗

arXiv2020

The clustering of LRGs in the DECaLS DR8 footprint: distance constraints from baryon acoustic oscillations using photometric redshifts

A photometric redshift sample of Luminous Red Galaxies (hereafter LRGs) obtained from The DECam Legacy Survey (DECaLS) is analysed to probe cosmic distances by exploiting the wedge approach of the two-point correlation function. Although the cosmological information is highly contaminated by the uncertainties existing in the photometric redshifts from the galaxy map, an angular diameter distance can be probed at the perpendicular configuration in which the measured correlation function is minimally contaminated. An ensemble of wedged correlation functions selected up to a given threshold based on having the least contamination was studied in the previous work (arXiv:1903.09651v2 [astro-ph.CO]) using simulations, and the extracted cosmological information was unbiased within this threshold. We apply the same methodology for analysing the LRG sample from DECaLS which will provide the optical imaging for targeting two-thirds of the DESI footprint and measure the angular diameter distances at $z=0.69$ and $z=0.87$ to be $D_{A}(0.697)=(1499 \pm 77\,\mathrm{Mpc})(r_{d}/r_{d,fid})$ and $D_{A}(0.874)=(1680 \pm 109\,\mathrm{Mpc})(r_{d}/r_{d,fid})$ with a fractional error of 5.14% and 6.48% respectively. We obtain a value of $H_{0}=67.59\pm5.52$ km/s/Mpc which supports the $H_0$ measured by all other BAO results and is consistent with $Λ$CDM model.

astro-ph.CO↗

arXiv2020

CosmoHub: Interactive exploration and distribution of astronomical data on Hadoop

We present CosmoHub (https://cosmohub.pic.es), a web application based on Hadoop to perform interactive exploration and distribution of massive cosmological datasets. Recent Cosmology seeks to unveil the nature of both dark matter and dark energy mapping the large-scale structure of the Universe, through the analysis of massive amounts of astronomical data, progressively increasing during the last (and future) decades with the digitization and automation of the experimental techniques. CosmoHub, hosted and developed at the Port d'Informació Científica (PIC), provides support to a worldwide community of scientists, without requiring the end user to know any Structured Query Language (SQL). It is serving data of several large international collaborations such as the Euclid space mission, the Dark Energy Survey (DES), the Physics of the Accelerating Universe Survey (PAUS) and the Marenostrum Institut de Ciències de l'Espai (MICE) numerical simulations. While originally developed as a PostgreSQL relational database web frontend, this work describes the current version of CosmoHub, built on top of Apache Hive, which facilitates scalable reading, writing and managing huge datasets. As CosmoHub's datasets are seldomly modified, Hive it is a better fit. Over 60 TiB of catalogued information and $50 \times 10^9$ astronomical objects can be interactively explored using an integrated visualization tool which includes 1D histogram and 2D heatmap plots. In our current implementation, online exploration of datasets of $10^9$ objects can be done in a timescale of tens of seconds. Users can also download customized subsets of data in standard formats generated in few minutes.

astro-ph.IM↗