SearcharxivSearch

arXiv subjects

Erfan Amini

Publications and source records attributed to Erfan Amini.

9 recordsLinked to original sources

Convergence of Byzantine-Resilient Gradient Tracking via Probabilistic Edge Dropout

We study distributed optimization over networks with Byzantine agents that may send arbitrary adversarial messages. We propose \emph{Gradient Tracking with Probabilistic Edge Dropout} (GT-PD), a stochastic gradient tracking method that preserves the convergence properties of gradient tracking under adversarial communication. GT-PD combines two complementary defense layers: a universal self-centered projection that clips each incoming message to a ball of radius $\tau$ around the receiving agent, and a fully decentralized probabilistic dropout rule driven by a dual-metric trust score in the decision and tracking channels. This design bounds adversarial perturbations while preserving the doubly stochastic mixing structure, a property often lost under robust aggregation in decentralized settings. Under complete Byzantine isolation ($p_b=0$), GT-PD converges linearly to a neighborhood determined solely by stochastic gradient variance. For partial isolation ($p_b>0$), we introduce \emph{Gradient Tracking with Probabilistic Edge Dropout and Leaky Integration} (GT-PD-L), which uses a leaky integrator to control the accumulation of tracking errors caused by persistent perturbations and achieves linear convergence to a bounded neighborhood determined by the stochastic variance and the clipping-to-leak ratio. We further show that under two-tier dropout with $p_h=1$, isolating Byzantine agents introduces no additional variance into the honest consensus dynamics. Experiments on MNIST under Sign Flip, ALIE, and Inner Product Manipulation attacks show that GT-PD-L outperforms coordinate-wise trimmed mean by up to 4.3 percentage points under stealth attacks.

cs.LG

Test-Time Adaptation For Speech Enhancement Via Mask Polarization

Adapting speech enhancement (SE) models to unseen environments is crucial for practical deployments, yet test-time adaptation (TTA) for SE remains largely under-explored due to a lack of understanding of how SE models degrade under domain shifts. We observe that mask-based SE models lose confidence under domain shifts, with predicted masks becoming flattened and losing decisive speech preservation and noise suppression. Based on this insight, we propose mask polarization (MPol), a lightweight TTA method that restores mask bimodality through distribution comparison using the Wasserstein distance. MPol requires no additional parameters beyond the trained model, making it suitable for resource-constrained edge deployments. Experimental results across diverse domain shifts and architectures demonstrate that MPol achieves very consistent gains that are competitive with significantly more complex approaches.

eess.AS

Multi-faceted Methodology for Coastal Vegetation Drag Coefficient Calibration: Implications for Wave Height Attenuation

The accurate prediction of wave height attenuation due to vegetation is crucial for designing effective and efficient natural and nature-based solutions for flood mitigation, shoreline protection, and coastal ecosystem preservation. Central to these predictions is the estimation of the vegetation drag coefficient. The present study undertakes a comprehensive evaluation of three distinct methodologies for estimating the drag coefficient: traditional manual calibration, calibration using a novel application of state-of-the-art metaheuristic optimization algorithms, and the integration of an established empirical bulk drag coefficient formula (Tanino and Nepf, 2008) into the XBeach non-hydrostatic wave model. These methodologies were tested using a series of existing laboratory experiments involving nearshore vegetation on a sloping beach. A key innovation of the study is the first application of metaheuristic optimization algorithms for calibrating the drag coefficient, which enables efficient automated searches to identify optimal values aligning with measurements. We found that the optimization algorithms rapidly converge to precise drag coefficients, enhancing accuracy and overcoming limitations in manual calibration which can be laborious and inconsistent. While the integrated empirical formula also demonstrates reasonable performance, the optimization approach exemplifies the potential of computational techniques to transform traditional practices of model calibration. Comparing these strategies provides a framework to determine the most effective methodology based on constraints in determining the vegetation drag coefficient.

physics.flu-dyn

A Novel Hybrid Algorithm for Optimized Solutions in Ocean Renewable Energy Industry: Enhancing Power Take-Off Parameters and Site Selection Procedure of Wave Energy Converters

Ocean renewable energy, particularly wave energy, has emerged as a pivotal component for diversifying the global energy portfolio, reducing dependence on fossil fuels, and mitigating climate change impacts. This study delves into the optimization of power take-off (PTO) parameters and the site selection process for an offshore oscillating surge wave energy converter (OSWEC). However, the intrinsic dynamics of these interactions, coupled with the multi-modal nature of the optimization landscape, make this a daunting challenge. Addressing this, we introduce the novel Hill Climb - Explorative Gray Wolf Optimizer (HC-EGWO). This new methodology blends a local search method with a global optimizer, incorporating dynamic control over exploration and exploitation rates. This balance paves the way for an enhanced exploration of the solution space, ensuring the identification of superior-quality solutions. Further anchoring our approach, a feasibility landscape analysis based on linear water wave theory assumptions and the flap's maximum angular motion is conducted. This ensures the optimized OSWEC consistently operates within safety and efficiency parameters. Our findings hold significant promise for the development of more streamlined OSWEC power take-off systems. They provide insights for selecting the prime offshore site, optimizing power output, and bolstering the overall adoption of ocean renewable energy sources. Impressively, by employing the HC-EGWO method, we achieved an upswing of up to 3.31% in power output compared to other methods. This substantial increment underscores the efficacy of our proposed optimization approach. Conclusively, the outcomes offer invaluable knowledge for deploying OSWECs in the South Caspian Sea, where unique environmental conditions intersect with considerable energy potential.

cs.NE

Optimization Study of Hydraulic Power Take-off System for an Ocean Wave Energy Converter

Ocean wave renewable energy is fast becoming a key part of renewable energy industries over the recent decades. By developing wave energy converters as the main converter technology in this process, their power take-off (PTO) systems have been investigated. Adjusting PTO parameters is a challenging optimization problem because there is a complex and nonlinear relationship between these parameters and the absorbed power output. In this regard, this study aims to optimize the PTO system parameters of a point absorber wave energy converter in the wave scenario in Perth, on Western Australian coasts. The converter is numerically designed to oscillate against irregular and multi-dimensional waves and sensitivity analysis for PTO settings is performed. Then, to find the optimal PTO system parameters which lead to the highest power output, ten optimization algorithms are incorporated to solve the non-linear problem, Including Nelder-Mead search method, Active-set method, Sequential quadratic Programming method (SQP), Multi-Verse Optimizer (MVO), and six modified combination of Genetic, Surrogate and fminsearch algorithms. After a feasibility landscape analysis, the optimization outcome is carried out and gives us the best answer in terms of PTO system settings. Finally, the investigation shows that the modified combinations of Genetic, Surrogate, and fminsearch algorithms can outperform the others in the studied wave scenario, as well as the interaction between PTO system variables.

cs.NE

Ocean Wave Energy Converters Optimization: A Comprehensive Review on Research Directions

Ocean wave energy is one of the latest renewable energy resources, projected to be commercialized and competitive with other energy technologies in the near future. However, wave energy technologies are not fully developed, so various criteria must be optimized to enter the energy market. To optimize the performance of wave energy converters (WECs) components, three challenges are mostly considered: i)Power take-off systems settings (PTO), ii)Geometry parameters of WECs, iii)WECs' layout. As each of them plays a significant role in harnessing the maximum power output, this paper reviews applied optimization techniques in WECs. Furthermore, due to the importance of fidelity and computational cost in numerical methods, we discuss methods to analyze a WEC together with the basics and developments of WECs interactions. Moreover, the most popular optimization methods applied to optimize WEC parameters are categorized, and their key characteristics are briefly discussed. As a result, in terms of convergence rate, a combination of bio-inspired algorithms and local search can outperform the competition in layout optimization. A review of PTO coefficients and the geometry of WECs have emphasized the indispensability of optimizing PTO coefficients and balancing design parameters with cost issues even though it is costly on multi-modal and large-scale problems.

physics.app-ph

Comparative Analysis of Oscillating Wave Energy Converter Performance in Southern Coast of the Caspian Sea

The importance of renewable energy supplies, particularly ocean wave energy, has become undeniable globally in the last two decades. Iran is not an exception due to the long barrier with deep water in the north and south of the country. Because of this potential, the first step is chosen in order to locate a suitable site for installing wave energy converters (WECs). The next step is an applicable design for converters based on conditional and geometrical parameters. In this study, locations with maximum potential are chosen, and conditional parameters are used as input data to design the oscillating converter geometrically. Next, geometric parameters are simulated by the ABAQUS program, and for verifying it, three case study sites in the Caspian sea are considered and designed in the WEC-Sim module in MATLAB to evaluate conditional and geometrical parameters simultaneously. Finally, both results are compared with each other. It is found that the Nowshahr port has more potential than Anzali and Amirabad port, and after considering the proposed design, the converter's productivity raised by 63 percent. It is also written that the flap's optimal width is recommended to be between 18 and 23 meters. Moreover, changes in damping incident forces have a direct relationship with the system's efficiency, and the value of this force is more on Nowshahr in pitch degree of freedom. Finally, according to the software outputs, it can be concluded that the force applied to the power take-off system behind the converter flap, which is the most crucial force in evaluating the performance of the converter as the leading indicator, is derived and compared between studied sites.

physics.app-ph

Investigating Wave Energy Potential in Southern Coasts of the Caspian Sea Using Grey Wolf Optimizer Algorithm

There is a significantly accelerating trend in the application of the marine wave energy converters in recent years. As a result, it is imperative to adopt a suitable point for implementing these systems. Besides, the Caspian Sea, as one of the most important marine renewable energy sources in Asia, is capable of supplying the coastal areas with a large amount of energy. Therefore, areas around nine ports in the southern coasts of the Caspian Sea were selected to measure their wave energy potential. Initially, the amount of energy on these points was measured using the irregular energy theory. It was observed that the wave power was higher in the southwestern areas (within the Kiashahr coast and Anzali port) than the southeastern areas. A new approach was developed to compare these points and measure their fitnesses in supplying the maximum energy using the Grey Wolf optimizer (GWO) algorithm and time history analysis. In this method, the optimal parameters were first extracted from the algorithm for assessing the points within the southern areas of the Caspian Sea. These values were regarded as the assessment indices. Then, the fitness of each point was obtained using the correlation function and the norm vector to present the most optimal position with maximum wave energy exploitation potential. This new approach was validated with analytical data, and its accuracy in predicting and comparing the wave power on different points was approved. Finally, by a side-by-side comparison of the parameters affecting the wave energy, the optimum range of significant wave height and wave energy period was achieved.

cs.NE

Performance investigation on the different wave energy converters layouts in real wave scenarios

Wave energy is a broadly accessible renewable energy source, but principally it is not unexploited still and fully developed. Wave energy technologies need more investigations to reach commercial developments. In this paper, an array of interacting wave energy converters (WECs) with various arrangements and layout size is considered. The WEC model is a symmetrical, spherical and fully submerged buoy with three tethers. A frequency-domain model is derived by using linear potential theory. Numerical simulations and parametric examinations are designed in order to evaluate the distance influence among buoys with a pre-defined arrangement on the total power output of the array, based on the irregular wave models. With regard to validating the best-found layout, we perform a landscape analysis experiment using a grid search technique. These experiments are evaluated in four real wave scenarios from south of Australia. Experiments show that the distance between WECs and also the relative angle of the layout to significant wave direction plays a pivotal role to harness more power from the incident waves. Furthermore, we observe that increasing the number of WEC in the layout leads to a rise in the optimal distance among WECs. The maximum power of an array produced by a 5 buoy layout arrangement with 185 $m$ distance among buoys in the Tasmania wave scenario with a relative angle of 63 degrees to the significant in-site wave direction.

physics.app-ph