Searcharxiv⌕ Search

arXiv subjects

Erfu Liu

Publications and source records attributed to Erfu Liu.

26 records · Page 2Linked to original sources

Intrinsic p-type W-based transition metal dichalcogenide by substitutional Ta-doping

Two-dimensional (2D) transition metal dichalcogenides (TMDs) have recently emerged as promising candidates for future electronics and optoelectronics. While most of TMDs are intrinsic n-type semiconductors due to electron donating which originates from chalcogen vacancies, obtaining intrinsic high-quality p-type semiconducting TMDs has been challenging. Here, we report an experimental approach to obtain intrinsic p-type Tungsten (W)-based TMDs by substitutional Ta-doping. The obtained few-layer Ta-doped WSe2 (Ta0.01W0.99Se2) field-effect transistor (FET) devices exhibit competitive p-type performances, including ~10^6 current on/off at room temperature. We also demonstrate high quality van der Waals (vdW) p-n heterojunctions based on Ta0.01W0.99Se2/MoS2 structure, which exhibit nearly ideal diode characteristics (with an ideality factor approaching 1 and a rectification ratio up to 10^5) and excellent photodetecting performance. Our study suggests that substitutional Ta-doping holds great promise to realize intrinsic p-type W-based TMDs for future electronic and photonic applications.

cond-mat.mtrl-sci↗

Room-temperature high detectivity mid-infrared photodetectors based on black arsenic phosphorus

The mid-infrared (MIR) spectral range, pertaining to important applications such as molecular 'fingerprint' imaging, remote sensing, free space telecommunication and optical radar, is of particular scientific interest and technological importance. However, state-of-the-art materials for MIR detection are limited by intrinsic noise and inconvenient fabrication processes, resulting in high cost photodetectors requiring cryogenic operation. We report black arsenic-phosphorus-based long wavelength infrared photodetectors with room temperature operation up to 8.2 um, entering the second MIR atmospheric transmission window. Combined with a van der Waals heterojunction, room temperature specific detectivity higher than 4.9*10^9 Jones was obtained in the 3-5 um range. The photodetector works in a zero-bias photovoltaic mode, enabling fast photoresponse and low dark noise. Our van der Waals heterojunction photodector not only exemplify black arsenic-phosphorus as a promising candidate for MIR opto-electronic applications, but also pave the way for a general strategy to suppress 1/f noise in photonic devices.

cond-mat.mtrl-sci↗

Gate-Tunable Negative Longitudinal Magnetoresistance in the Predicted Type-II Weyl Semimetal WTe2

The progress in exploiting new electronic materials and devices has been a major driving force in solid-state physics. As a new state of matter, a Weyl semimetal (WSM), particularly a type-II WSM, hosts Weyl fermions as emergent quasiparticles and may harbor novel electrical transport properties because of the exotic Fermi surface. Nevertheless, such a type-II WSM material has not been experimentally observed in nature. In this work, by performing systematic magneto-transport studies on thin films of a predicted material candidate WTe2, we observe notable angle-sensitive (between the electric and magnetic fields) negative longitudinal magnetoresistance (MR), which can likely be attributed to the chiral anomaly in WSM. This phenomenon also exhibits strong planar orientation dependence with the absence of negative longitudinal MR along the tungsten chains (a axis), which is consistent with the distinctive feature of a type-II WSM. By applying a gate voltage, we demonstrate that the Fermi energy can be tuned through the Weyl points via the electric field effect; this is the first report of controlling the unique transport properties in situ in a WSM system. Our results have important implications for investigating simulated quantum field theory in solid-state systems and may open opportunities for implementing new types of electronic applications, such as field-effect chiral electronic devices.

cond-mat.mes-hall↗

Broadband Photovoltaic Detectors based on an Atomically Thin Heterostructure

Van der Waals junctions of two-dimensional materials with an atomically sharp interface open up unprecedented opportunities to design and study functional heterostructures. Semiconducting transition metal dichalcogenides have shown tremendous potential for future applications due to their unique electronic properties and strong light-matter interaction. However, many important optoelectronic applications, such as broadband photodetection, are severely hindered by their limited spectral range and reduced light absorption. Here, we present a p-g-n heterostructure formed by sandwiching graphene with a gapless bandstructure and wide absorption spectrum in an atomically thin p-n junction to overcome these major limitations. We have successfully demonstrated a MoS2-graphene-WSe2 heterostructure for broadband photodetection in the visible to short-wavelength infrared range at room temperature that exhibits competitive device performance, including a specific detectivity of up to 1011 Jones in the near-infrared region. Our results pave the way toward the implementation of atomically thin heterostructures for broadband and sensitive optoelectronic applications.

cond-mat.mtrl-sci↗

High responsivity phototransistors based on few-layer ReS2 for weak signal detection

Two-dimensional transition metal dichalcogenides are emerging with tremendous potential in many optoelectronic applications due to their strong light-matter interactions. To fully explore their potential in photoconductive detectors, high responsivity and weak signal detection are required. Here, we present high responsivity phototransistors based on few-layer rhenium disulfide (ReS2). Depending on the back gate voltage, source drain bias and incident optical light intensity, the maximum attainable photoresponsivity can reach as high as 88,600 A W-1, which is a record value compared to other two-dimensional materials with similar device structures and two orders of magnitude higher than that of monolayer MoS2. Such high photoresponsivity is attributed to the increased light absorption as well as the gain enhancement due to the existence of trap states in the few-layer ReS2 flakes. It further enables the detection of weak signals, as successfully demonstrated with weak light sources including a lighter and limited fluorescent lighting. Our studies underscore ReS2 as a promising material for future sensitive optoelectronic applications.

cond-mat.mtrl-sci↗

Raman vibrational spectra of bulk to monolayer ReS2 with lower symmetry

Lattice structure and symmetry of two-dimensional (2D) layered materials are of key importance to their fundamental mechanical, thermal, electronic and optical properties. Raman spectroscopy, as a convenient and nondestructive tool, however has its limitations on identifying all symmetry allowing Raman modes and determining the corresponding crystal structure of 2D layered materials with high symmetry like graphene and MoS2. Due to lower structural symmetry and extraordinary weak interlayer coupling of ReS2, we successfully identified all 18 first-order Raman active modes for bulk and monolayer ReS2. Without van der Waals (vdW) correction, our local density approximation (LDA) calculations successfully reproduce all the Raman modes. Our calculations also suggest no surface reconstruction effect and the absence of low frequency rigid-layer Raman modes below 100 cm-1. Combining with Raman and LDA thus provides a general approach for studying the vibrational and structural properties of 2D layered materials with lower symmetry.

cond-mat.mes-hall↗

The positive piezoconductive effect in graphene

As the thinnest conductive and elastic material, graphene is expected to play a crucial role in post-Moore era. Besides applications on electronic devices, graphene has shown great potential for nano-electromechanical systems. While interlayer interactions play a key role in modifying the electronic structures of layered materials, no attention has been given to their impact on electromechanical properties. Here we report the positive piezoconductive effect observed in suspended bi- and multi-layer graphene. The effect is highly layer number dependent and shows the most pronounced response for tri-layer graphene. The effect, and its dependence on the layer number, can be understood as resulting from the strain-induced competition between interlayer coupling and intralayer transport, as confirmed by the numerical calculations based on the non-equilibrium Green's function method. Our results enrich the understanding of graphene and point to layer number as a powerful tool for tuning the electromechanical properties of graphene for future applications.

cond-mat.mes-hall↗

Integrated Digital Inverters Based on Two-dimensional Anisotropic ReS2 Field-effect Transistors

Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are emerging as top candidates for post-silicon electronics. While most of 2D TMDs exhibit isotropic behavior, lowering the lattice symmetry could induce anisotropic properties, which are both scientifically interesting and potentially useful. Here, we present atomically thin rhenium disulfide (ReS2) flakes with a unique distorted 1T structure, which exhibit in-plane anisotropic properties. We fabricated mono- and few-layer ReS2 field effect transistors (FETs), which exhibit competitive performance with large current on/off ratios (~107) and low subthreshold swings (100 mV dec-1). The observed anisotropic ratio along two principle axes reaches 3.1, which is the highest among all known 2D semiconducting materials. Furthermore, we successfully demonstrated an integrated digital inverter with good performance by utilizing two ReS2 anisotropic FETs, suggesting the promising implementation of large-scale 2D logic circuits. Our results underscore the unique properties of 2D semiconducting materials with low crystal symmetry for future electronic applications.

cond-mat.mtrl-sci↗