arXiv subjects

Eric Folsom

Publications and source records attributed to Eric Folsom.

6 recordsLinked to original sources

arXiv2026

Cumulative X-ray Damage in Bismuth Selenide Examined by Simultaneous TXM and XRD

Bismuth selenide (Bi2Se3) is a topological insulator with potential applications in thermoelectrics, spintronics, and optoelectronics. However, its response to radiation remains poorly understood. We investigate cumulative X-ray damage in Bi2Se3 using simultane- ous transmission X-ray microscopy (TXM) and X-ray diffraction (XRD) at the Pohang Accelerator Laboratory X-Ray Free Electron Laser (PAL-XFEL) over 27,000 successive pulses. We observe distinct damage mechanisms: rapid hole formation via vaporization within 100 pulses, followed by slower grain refinement and material sputtering over thousands of thermal cycles. Williamson-Hall analysis reveals a progressive transformation from single-crystal to nanocrystalline structure, with grain sizes decreasing from mi- cron to nanometer scale. Finite-element modeling confirms that X-rays penetrate 13.47 {\mu}m, driving local temperatures above 1600 K with subsequent cooling between pulses. Scanning electron microscopy identifies three characteristic morphologies correspond- ing to different thermal histories: sputter streaks, prismatic crystals, and disordered microcrystals. Our results demonstrate that grain-boundary formation creates a feedback mechanism that accelerates damage in later pulses. This work establishes a method- ology for studying radiation damage across multiple length scales and provides insight into topological insulator stability under extreme conditions

cond-mat.mtrl-sci↗

arXiv2024

X-ray induced grain boundary formation and grain rotation in Bi2Se3

Optimizing grain boundary characteristics in polycrystalline materials can improve their properties. Many processing methods have been developed for grain boundary manipulation, including the use of intense radiation in certain applications. In this work, we used X-ray free electron laser pulses to irradiate single-crystalline bismuth selenide (Bi2Se3) and observed grain boundary formation and subsequent grain rotation in response to the X-ray radiation. Our observations with simultaneous transmission X-ray microscopy and X-ray diffraction demonstrate how intense X- ray radiation can rapidly change size and texture of grains.

cond-mat.mtrl-sci↗

arXiv2023

Dark-Field X-ray Microscopy for 2D and 3D imaging of Microstructural Dynamics at the European X-ray Free Electron Laser

Dark field X-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond X-ray pulses generated by X-ray free-electron lasers (XFEL), DFXM can achieve sub-{\mu}m spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically-driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatially 3D and 2D axial-strain scans with sub-{\mu}m spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatio-temporal dynamics of microstructures.

cond-mat.mes-hall↗

arXiv2022

Real-time imaging of acoustic waves in bulk materials with X-ray microscopy

Materials modelling and processing require experiments to visualize and quantify how external excitations drive the evolution of deep subsurface structure and defects that determine properties. Today, 3D movies with ~100-nm resolution of crystalline structure are regularly acquired in minutes to hours using X-ray diffraction based imaging. We present an X-ray microscope that improves this time resolution to <100 femtoseconds, with images attainable even from a single X-ray pulse. Using this, we resolve the propagation of 18-km/s acoustic waves in mm-sized diamond crystals, and demonstrate how mechanical energy thermalizes from picosecond to microsecond timescales. Our approach unlocks a vast range of new experiments of materials phenomena with intricate structural dynamics at ultrafast timescales.

cond-mat.mtrl-sci↗

arXiv2022

Simultaneous Bright- and Dark-Field X-ray Microscopy at X-ray Free Electron Lasers

The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and defects required to map lattice distortions or deformation, but are limited to studies of the (near) surface. Generally speaking, such tools cannot probe the structural dynamics in a way that is representative of bulk behavior. Synchrotron X-ray diffraction based imaging has long mapped the deeply embedded structural elements, and with enhanced resolution, Dark Field X-ray Microscopy (DFXM) can now map those features with the requisite nm-resolution. However, these techniques still suffer from the required integration times due to limitations from the source and optics. This work extends DFXM to X-ray free electron lasers, showing how the $10^{12}$ photons per pulse available at these sources offer structural characterization down to 100 fs resolution (orders of magnitude faster than current synchrotron images). We introduce the XFEL DFXM setup with simultaneous bright field microscopy to probe density changes within the same volume. This work presents a comprehensive guide to the multi-modal ultrafast high-resolution X-ray microscope that we constructed and tested at two XFELs, and shows initial data demonstrating two timing strategies to study associated reversible or irreversible lattice dynamics.

cond-mat.mtrl-sci↗

arXiv2022

Development of slurry targets for high repetition-rate XFEL experiments

Combining an x-ray free electron laser (XFEL) with high power laser drivers enables the study of phase transitions, equation-of-state, grain growth, strength, and transformation pathways as a function of pressure to 100s GPa along different thermodynamic compression paths. Future high-repetition rate laser operation will enable data to be accumulated at >1 Hz which poses a number of experimental challenges including the need to rapidly replenish the target. Here, we present a combined shock-compression and X-ray diffraction study on vol% epoxy(50)-crystalline grains(50) (slurry) targets, which can be fashioned into extruded ribbons for high repetition-rate operation. For shock-loaded NaCl-slurry samples, we observe pressure, density and temperature states within the embedded NaCl grains consistent with observations for shock-compressed single-crystal NaCl.

hep-ex↗