arXiv subjects

Eric I. Rosenthal

Publications and source records attributed to Eric I. Rosenthal.

15 recordsLinked to original sources

arXiv2026

Quantum sensing with a spin ensemble in a two-dimensional material

Quantum sensing with solid-state spin defects has transformed nanoscale metrology, offering sub-wavelength spatial resolution with exceptional sensitivity to multiple signal types. Maximizing these advantages requires minimizing both the sensor-target separation and the detectable signal threshold. However, leading platforms such as nitrogen-vacancy (NV) centers in diamond suffer from performance degradation near surfaces or in nanoscale volumes, motivating the search for optically addressable spin sensors in atomically thin, two-dimensional (2D) van der Waals materials. Here, we present a comprehensive experimental framework to probe a 2D spin ensemble, including its Hamiltonian, coherent sensing dynamics, and noise environment. Using a central spin system in a hexagonal boron nitride (hBN) crystal, we fully map the hyperfine interactions with proximal nuclear spins, demonstrate switchable magnetic and electric noise sensing, and introduce a method to accurately reconstruct the environmental noise spectrum while explicitly accounting for quantum control imperfections. We achieve a record coherence time of $80~μ\mathrm{s}$ under dynamical decoupling, enabling sub-microtesla AC magnetic sensitivity at a $10~\mathrm{nm}$ target distance. Leveraging the broad opportunities for defect engineering in atomically thin hosts, these results lay the foundation for next-generation quantum sensors with ultrahigh sensitivity, tunable noise selectivity, and versatile functionalities.

quant-ph↗

arXiv2026

Three-Wave Mixing Element with Quantum Paraelectric Materials

At cryogenic temperatures and microwave frequencies, the perovskite crystals strontium titanate (STO) and potassium tantalate (KTO) have large, tunable permittivity arising from a quantum paraelectric phase. As such, these materials hold promise as a platform to realize compact, variable capacitance elements for use in quantum devices. From modulating this capacitance, we propose the development of a parametric mixing element: a quantum paraelectric nonlinear dielectric amplifier (PANDA). We calculate that a PANDA made from a nanofabricated parallel plate capacitor and realistic design constraints can demonstrate a three-wave mixing strength of order MHz, in comparison to an effective Kerr strength of sub-Hz. This suggests excellent performance as a three-wave mixing element, with high compression power in analogy to superconducting parametric amplifiers based on kinetic inductance. Beyond parametric amplifiers, we predict that compact, tunable capacitors based on STO, KTO, and related materials can enable a wide class of cryogenic quantum circuits including novel filters, switches, circulators, and qubits.

quant-ph↗

arXiv2025

Quantum sensing of electron beams using solid-state spins

Scattering experiments with energetic particles, such as free electrons, have been historically used to reveal the quantum structure of matter. However, realizing coherent interactions between free-electron beams and solid-state quantum systems has remained out of reach, owing to their intrinsically weak coupling. Realizing such coherent control would open up opportunities for hybrid quantum platforms combining free electrons and solid-state qubits for coincident quantum information processing and nanoscale sensing. Here, we present a framework that employs negatively charged nitrogen-vacancy centers (NV-) in diamond as quantum sensors of a bunched electron beam. We develop a Lindblad master equation description of the magnetic free-electron--qubit interactions and identify spin relaxometry as a sensitive probe of the interaction. Experimentally, we integrate a confocal fluorescence microscopy setup into a microwave-bunched electron beam line. We monitor charge-state dynamics and assess their impact on key sensing performance metrics (such as spin readout contrast), defining safe operating parameters for quantum sensing experiments. By performing $T_1$ relaxometry under controlled electron beam exposure, we establish an upper bound on the free-electron--spin coupling strength. Our results establish NV- centers as quantitative probes of free electrons, providing a metrological benchmark for free-electron--qubit coupling under realistic conditions, and chart a route toward solid-state quantum control with electron beams.

quant-ph↗

arXiv2024

Quantum sensitivity of parametric oscillators

Many quantum systems exhibit high sensitivity to their initial conditions, where microscopic quantum fluctuations can significantly influence macroscopic observables. Understanding how quantum states may influence the behavior of nonlinear dynamic systems may open new avenues in controlling light-matter interactions. To explore this issue, we analyze the sensitivity of a fundamental quantum optical process - parametric oscillation - to quantum initializations. Focusing on optical parametric oscillators (OPOs), we demonstrate that the quantum statistics of arbitrary initial states are imprinted in the early-stage dynamics and can persist in the steady-state probabilities. We derive the "quantum sensitivity" of parametric oscillators, linking the initial quantum state to the system's steady-state outcomes, highlighting how losses and parametric gain govern the system's quantum sensitivity. Moreover, we show that these findings extend beyond OPOs to a broader class of nonlinear systems, including Josephson junction based superconducting circuits. Our work opens the way to a new class of experiments that can test the sensitivity of macroscopic systems to quantum initial conditions and offers a pathway for controlling systems with quantum degrees of freedom.

quant-ph↗

arXiv2024

Single-Shot Readout and Weak Measurement of a Tin-Vacancy Qubit in Diamond

The negatively charged tin-vacancy center in diamond (SnV$^-$) is an emerging platform for building the next generation of long-distance quantum networks. This is due to the SnV$^-$'s favorable optical and spin properties including bright emission, insensitivity to electronic noise, and long spin coherence times at temperatures above 1 Kelvin. Here, we demonstrate measurement of a single SnV$^-$ electronic spin with a single-shot readout fidelity of $87.4\%$, which can be further improved to $98.5\%$ by conditioning on multiple readouts. We show this performance is compatible with rapid microwave spin control, demonstrating that the trade-off between optical readout and spin control inherent to group-IV centers in diamond can be overcome for the SnV$^-$. Finally, we use weak quantum measurement to study measurement induced dephasing; this illuminates the fundamental interplay between measurement and decoherence in quantum mechanics, and makes use of the qubit's spin coherence as a metrological tool. Taken together, these results overcome an important hurdle in the development of the SnV$^-$ based quantum technologies, and in the process, develop techniques and understanding broadly applicable to the study of solid-state quantum emitters.

quant-ph↗

arXiv2024

Spatial Addressing of Qubits in a Dispersive Waveguide

Waveguide quantum electrodynamics, the study of atomic systems interacting with propagating electromagnetic fields, is a powerful platform for understanding the complex interplay between light and matter. Qubit control is an indispensable tool in this field, and most experiments have so far focused on narrowband electromagnetic waves that interact with qubits at specific frequencies. This interaction, however, changes significantly with fast, broadband pulses, as waveguide properties like dispersion affect the pulse evolution and its impact on the qubit. Here, we use dispersion to achieve spatial addressing of superconducting qubits separated by a sub-wavelength distance within a microwave waveguide. This novel approach relies on a self-focusing effect to create a position-dependent interaction between the pulse and the qubits. This experiment emphasizes the importance of dispersion in the design and analysis of quantum experiments, and offers new avenues for the rapid control of quantum states.

quant-ph↗

arXiv2023

Microwave Spin Control of a Tin-Vacancy Qubit in Diamond

The negatively charged tin-vacancy (SnV-) center in diamond is a promising solid-state qubit for applications in quantum networking due to its high quantum efficiency, strong zero phonon emission, and reduced sensitivity to electrical noise. The SnV- has a large spin-orbit coupling, which allows for long spin lifetimes at elevated temperatures, but unfortunately suppresses the magnetic dipole transitions desired for quantum control. Here, by use of a naturally strained center, we overcome this limitation and achieve high-fidelity microwave spin control. We demonstrate a pi-pulse fidelity of up to 99.51+/0.03%$ and a Hahn-echo coherence time of T2echo = 170.0+/-2.8 microseconds, both the highest yet reported for SnV- platform. This performance comes without compromise to optical stability, and is demonstrated at 1.7 Kelvin where ample cooling power is available to mitigate drive induced heating. These results pave the way for SnV- spins to be used as a building block for future quantum technologies.

quant-ph↗

arXiv2023

Integrating planar circuits with superconducting 3D microwave cavities using tunable low-loss couplers

We design and test a low-loss interface between superconducting 3-dimensional microwave cavities and 2-dimensional circuits, where the coupling rate is highly tunable. This interface seamlessly integrates a loop antenna and a Josephson junction-based coupling element. We demonstrate that the loss added by connecting this interface to the cavity is 1.28 kHz, corresponding to an inverse quality factor of $1/(4.5 \times 10^6)$. Furthermore, we show that the cavity's external coupling rate to a 50 $Ω$ transmission line can be tuned from negligibly small to over 3 orders of magnitude larger than its internal loss rate in a characteristic time of 3.2 ns. This switching speed does not impose additional limits on the coupling rate because it is much faster than the coupling rate. Moreover, the coupler can be controlled by low frequency signals to avoid interference with microwave signals near the cavity or qubit frequencies. Finally, the coupling element introduces a 0.04 Hz/photon self-Kerr nonlinearity to the cavity, remaining linear in high photon number operations.

quant-ph↗

arXiv2021

Efficient and Low-Backaction Quantum Measurement Using a Chip-Scale Detector

Superconducting qubits are a leading platform for scalable quantum computing and quantum error correction. One feature of this platform is the ability to perform projective measurements orders of magnitude more quickly than qubit decoherence times. Such measurements are enabled by the use of quantum-limited parametric amplifiers in conjunction with ferrite circulators - magnetic devices which provide isolation from noise and decoherence due to amplifier backaction. Because these non-reciprocal elements have limited performance and are not easily integrated on-chip, it has been a longstanding goal to replace them with a scalable alternative. Here, we demonstrate a solution to this problem by using a superconducting switch to control the coupling between a qubit and amplifier. Doing so, we measure a transmon qubit using a single, chip-scale device to provide both parametric amplification and isolation from the bulk of amplifier backaction. This measurement is also fast, high fidelity, and has 70% efficiency, comparable to the best that has been reported in any superconducting qubit measurement. As such, this work constitutes a high-quality platform for the scalable measurement of superconducting qubits.

quant-ph↗

arXiv2018

Design of an on-chip superconducting microwave circulator with octave bandwidth

We present a design for a superconducting, on-chip circulator composed of dynamically modulated transfer switches and delays. Design goals are set for the multiplexed readout of superconducting qubits. Simulations of the device show that it allows for low-loss circulation (insertion loss < 0.35 dB and isolation >20 dB) over an instantaneous bandwidth of 2.3 GHz. As the device is estimated to be linear for input powers up to -65 dBm, this design improves on the bandwidth and power-handling of previous superconducting circulators by over a factor of 50, making it ideal for integration with broadband quantum limited amplifiers.

quant-ph↗

arXiv2018

Topological phase transition measured in a dissipative metamaterial

We construct a metamaterial from radio-frequency harmonic oscillators, and find two topologically distinct phases resulting from dissipation engineered into the system. These phases are distinguished by a quantized value of bulk energy transport. The impulse response of our circuit is measured and used to reconstruct the band structure and winding number of circuit eigenfunctions around a dark mode. Our results demonstrate that dissipation can lead to topological transport in a much wider class of physical systems than considered before.

cond-mat.mes-hall↗

arXiv2017

Breaking Lorentz reciprocity with frequency conversion and delay

We introduce a method for breaking Lorentz reciprocity based upon the non-commutation of frequency conversion and delay. The method requires no magnetic materials or resonant physics, allowing for the design of scalable and broadband non-reciprocal circuits. With this approach, two types of gyrators --- universal building blocks for linear, non-reciprocal circuits --- are constructed. Using one of these gyrators, we create a circulator with > 15 dB of isolation across the 5 -- 9 GHz band. Our designs may be readily extended to any platform with suitable frequency conversion elements, including semiconducting devices for telecommunication or an on-chip superconducting implementation for quantum information processing.

physics.class-ph↗

arXiv2017

Widely tunable on-chip microwave circulator for superconducting quantum circuits

We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW ($\approx 10^3$ circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.

quant-ph↗

arXiv2017

Single-sideband modulator for frequency domain multiplexing of superconducting qubit readout

We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microwave-frequency control tones. Microwave signals in the 4 to 8 GHz band, with power up to -85 dBm, are converted up or down in frequency by as much as 120 MHz. Spurious harmonics in the device can be suppressed by up to 25 dB for select probe and modulation frequencies.

quant-ph↗

arXiv2016

General purpose multiplexing device for cryogenic microwave systems

We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures. In particular, rapid switching (less than or equal to 15 ns) between these operation modes enables several multiplexing readout protocols for superconducting qubits. We report the device's performance in a two-channel code domain multiplexing demonstration. The multiplexed data are recovered with fast readout times (up to 400 ns) and infidelities less than 0.01 for probe powers greater than 7 fW, in agreement with the expectation for binary signaling with Gaussian noise.

quant-ph↗