SearcharxivSearch

arXiv subjects

Eric R. J. Edwards

Publications and source records attributed to Eric R. J. Edwards.

8 recordsLinked to original sources

Spin wave localization and guiding by magnon band structure engineering in yttrium iron garnet

In spintronics the propagation of spin-wave excitations in magnetically ordered materials can also be used to transport and process information. One of the most popular materials in this regard is the ferrimagnetic insulator yttrium-iron-garnet due its exceptionally small spin-wave damping parameter. While the small relaxation rate allows for large propagation length of magnetic excitations, it also leads to non-locality of the magnetic properties. By imaging spin waves their band structure is mapped. In doing so wave vector selection is shown to suppress dispersion effects to a large extent allowing for local measurements of spin relaxation. Moreover we demonstrate even higher control of magnon propagation by employing the wave vector selectivity near an avoided crossing of different spin-wave modes where the group velocity approaches zero. Here local engineering of the dispersion allows constructing magnonic waveguides and at the same time reveals the local relaxation properties.

cond-mat.mes-hall

High Spin-Wave Propagation Length Consistent with Low Damping in a Metallic Ferromagnet

We report ultra-low intrinsic magnetic damping in Co$_{\text{25}}$Fe$_{\text{75}}$ heterostructures, reaching the low $10^{-4}$ regime at room temperature. By using a broadband ferromagnetic resonance technique, we extracted the dynamic magnetic properties of several Co$_{\text{25}}$Fe$_{\text{75}}$-based heterostructures with varying ferromagnetic layer thickness. By estimating the eddy current contribution to damping, measuring radiative damping and spin pumping effects, we found the intrinsic damping of a 26\,nm thick sample to be $$α_{\mathrm{0}} \lesssim 3.18\times10^{-4}$. Furthermore, using Brillouin light scattering microscopy we measured spin-wave propagation lengths of up to $(21\pm1)\,\mathrm{μm}$ in a 26 nm thick Co$_{\text{25}}$Fe$_{\text{75}}$ heterostructure at room temperature, which is in excellent agreement with the measured damping.

cond-mat.mtrl-sci

Magnetoelasticity of $\mathrm{Co_{25}}\mathrm{Fe_{75}}$ thin films

We investigate the magnetoelastic properties of $\mathrm{Co_{25}}\mathrm{Fe_{75}}$ and $\mathrm{Co_{10}}\mathrm{Fe_{90}}$ thin films by measuring the mechanical properties of a doubly clamped string resonator covered with multi-layer stacks containing these films. For the magnetostrictive constants we find $λ_{\mathrm{Co_{25}}\mathrm{Fe_{75}}}=(-20.68\pm0.25)\times10^{-6}$ and $λ_{\mathrm{Co_{10}}\mathrm{Fe_{90}}}=(-9.80\pm0.12)\times10^{-6}$ at room temperature. In stark contrast to the positive magnetostriction previously found in bulk CoFe crystals. $\mathrm{Co_{25}}\mathrm{Fe_{75}}$ thin films unite low damping and sizable magnetostriction and are thus a prime candidate for micromechanical magnonic applications, such as sensors and hybrid phonon-magnon systems.

cond-mat.mes-hall

$\text{Co}_{25}\text{Fe}_{75}$ Thin Films with Ultralow Total Damping

We measure the dynamic properties of $\text{Co}_{25}\text{Fe}_{75}$ thin films grown by dc magnetron sputtering. Using ferromagnetic resonance spectroscopy, we demonstrate an ultralow total damping parameter in the out-of-plane configuration of < 0.0013, whereas for the in-plane configuration we find a minimum total damping of < 0.0020. In both cases, we observe low inhomogeneous linewidth broadening in macroscopic films. We observe a minimum full-width half-maximum linewidth of 1 mT at 10 GHz resonance frequency for a 12 nm thick film. We characterize the morphology and structure of these films as a function of seed layer combinations and find large variation of the qualitative behavior of the in-plane linewidth vs. resonance frequency. Finally, we use wavevector-dependent Brillouin light scattering spectroscopy to characterize the spin-wave dispersion at wave vectors up to 23 $μ\text{m}^{-1}$.

cond-mat.mtrl-sci

Determination of spin Hall effect and spin diffusion length of Pt from self-consistent fitting of damping enhancement and inverse spin-orbit torque measurements

Understanding the evolution of spin-orbit torque (SOT) with increasing heavy-metal thickness in ferromagnet/normal metal (FM/NM) bilayers is critical for the development of magnetic memory based on SOT. However, several experiments have revealed an apparent discrepancy between damping enhancement and damping-like SOT regarding their dependence on NM thickness. Here, using linewidth and phase-resolved amplitude analysis of vector network analyzer ferromagnetic resonance (VNA-FMR) measurements, we simultaneously extract damping enhancement and both field-like and damping-like inverse SOT in Ni$_{80}$Fe$_{20}$/Pt bilayers as a function of Pt thickness. By enforcing an interpretation of the data which satisfies Onsager reciprocity, we find that both the damping enhancement and damping-like inverse SOT can be described by a single spin diffusion length ($\approx$ 4 nm), and that we can separate the spin pumping and spin memory loss (SML) contributions to the total damping. This analysis indicates that less than 40% of the angular momentum pumped by FMR through the Ni$_{80}$Fe$_{20}$/Pt interface is transported as spin current into the Pt. On account of the SML and corresponding reduction in total spin current available for spin-charge transduction in the Pt, we determine the Pt spin Hall conductivity ($σ_\mathrm{SH} = (2.36 \pm 0.04)\times10^6 Ω^{-1} \mathrm{m}^{-1}$) and bulk spin Hall angle ($θ_\mathrm{SH}=0.387 \pm0.008$) to be larger than commonly-cited values. These results suggest that Pt can be an extremely useful source of SOT if the FM/NM interface can be engineered to minimize SML. Lastly, we find that self-consistent fitting of the damping and SOT data is best achieved by a model with Elliott-Yafet spin relaxation and extrinsic inverse spin Hall effect, such that both the spin diffusion length and spin Hall conductivity are proportional to the Pt charge conductivity.

cond-mat.mes-hall

Inductive detection of field-like and damping-like AC inverse spin-orbit torques in ferromagnet/normal metal bilayers

Functional spintronic devices rely on spin-charge interconversion effects, such as the reciprocal processes of electric field-driven spin torque and magnetization dynamics-driven spin and charge flow. Both damping-like and field-like spin-orbit torques have been observed in the forward process of current-driven spin torque and damping-like inverse spin-orbit torque has been well-studied via spin pumping into heavy metal layers. Here we demonstrate that established microwave transmission spectroscopy of ferromagnet/normal metal bilayers under ferromagnetic resonance can be used to inductively detect the AC charge currents driven by the inverse spin-charge conversion processes. This technique relies on vector network analyzer ferromagnetic resonance (VNA-FMR) measurements. We show that in addition to the commonly-extracted spectroscopic information, VNA-FMR measurements can be used to quantify the magnitude and phase of all AC charge currents in the sample, including those due to spin pumping and spin-charge conversion. Our findings reveal that Ni$_{80}$Fe$_{20}$/Pt bilayers exhibit both damping-like and field-like inverse spin-orbit torques. While the magnitudes of both the damping-like and field-like inverse spin-orbit torque are of comparable scale to prior reported values for similar material systems, we observed a significant dependence of the damping-like magnitude on the order of deposition. This suggests interface quality plays an important role in the overall strength of the damping-like spin-to-charge conversion.

cond-mat.mtrl-sci

Observation of Spin-Orbit Effects with Spin Rotation Symmetry

The spin-orbit interaction enables interconversion between a charge current and a spin current. It is usually believed that in a nonmagnetic metal (NM) or at a NM/ferromagnetic metal (FM) bilayer interface, the symmetry of spin-orbit effects (SOE) requires that the spin current, charge current and spin orientation are all orthogonal to each other. Here we show the observation of a SOE near the NM/FM interface that exhibits a very different symmetry from the conventional spin Hall effect, insofar as the spin polarization is further rotated about the magnetization. These results imply that a perpendicularly polarized spin current can be generated with an in-plane charge current simply by use of a FM/NM bilayer with magnetization collinear to the charge current. The ability to generate a spin current with arbitrary polarization using typical magnetic materials will greatly benefit the development of magnetic memories.

cond-mat.mtrl-sci

A microwave interferometer of the Michelson-type to improve the dynamic range of broadband ferromagnetic resonance measurements

We present a Michelson-type microwave interferometer for use in ferromagnetic resonance experiments. The interferometer is capable of broadband operation without manual adjustment of phase delay or amplitude attenuation. A prototype of the design shows significant improvement of the signal-to-noise ratio when compared to non-interferometric ferromagnetic resonance experiments. We demonstrate that this increase in sensitivity can lead to a drastic increase in the data acquisition rate for hard-to-measure thin films that otherwise would require long integration times.

cond-mat.mes-hall