arXiv subjects

Eric Sihite

Publications and source records attributed to Eric Sihite.

At least 19 recordsLinked to original sources

arXiv2025

Dynamic Quadrupedal Legged and Aerial Locomotion via Structure Repurposing

Multi-modal ground-aerial robots have been extensively studied, with a significant challenge lying in the integration of conflicting requirements across different modes of operation. The Husky robot family, developed at Northeastern University, and specifically the Husky v.2 discussed in this study, addresses this challenge by incorporating posture manipulation and thrust vectoring into multi-modal locomotion through structure repurposing. This quadrupedal robot features leg structures that can be repurposed for dynamic legged locomotion and flight. In this paper, we present the hardware design of the robot and report primary results on dynamic quadrupedal legged locomotion and hovering.

cs.RO↗

arXiv2025

Guiding Energy-Efficient Locomotion through Impact Mitigation Rewards

Animals achieve energy-efficient locomotion by their implicit passive dynamics, a marvel that has captivated roboticists for decades.Recently, methods incorporated Adversarial Motion Prior (AMP) and Reinforcement learning (RL) shows promising progress to replicate Animals' naturalistic motion. However, such imitation learning approaches predominantly capture explicit kinematic patterns, so-called gaits, while overlooking the implicit passive dynamics. This work bridges this gap by incorporating a reward term guided by Impact Mitigation Factor (IMF), a physics-informed metric that quantifies a robot's ability to passively mitigate impacts. By integrating IMF with AMP, our approach enables RL policies to learn both explicit motion trajectories from animal reference motion and the implicit passive dynamic. We demonstrate energy efficiency improvements of up to 32%, as measured by the Cost of Transport (CoT), across both AMP and handcrafted reward structure.

cs.RO↗

arXiv2025

Crater Observing Bio-inspired Rolling Articulator (COBRA)

NASA aims to establish a sustainable human basecamp on the Moon as a stepping stone for future missions to Mars and beyond. The discovery of water ice on the Moon's craters located in permanently shadowed regions, which can provide drinking water, oxygen, and rocket fuel, is therefore of critical importance. However, current methods to access lunar ice deposits are limited. While rovers have been used to explore the lunar surface for decades, they face significant challenges in navigating harsh terrains, such as permanently shadowed craters, due to the high risk of immobilization. This report introduces COBRA (Crater Observing Bio-inspired Rolling Articulator), a multi-modal snake-style robot designed to overcome mobility challenges in Shackleton Crater's rugged environment. COBRA combines slithering and tumbling locomotion to adapt to various crater terrains. In snake mode, it uses sidewinding to traverse flat or low inclined surfaces, while in tumbling mode, it forms a circular barrel by linking its head and tail, enabling rapid movement with minimal energy on steep slopes. Equipped with an onboard computer, stereo camera, inertial measurement unit, and joint encoders, COBRA facilitates real-time data collection and autonomous operation. This paper highlights COBRAs robustness and efficiency in navigating extreme terrains through both simulations and experimental validation.

cs.RO↗

arXiv2025

Estimation of Aerodynamics Forces in Dynamic Morphing Wing Flight

Accurate estimation of aerodynamic forces is essential for advancing the control, modeling, and design of flapping-wing aerial robots with dynamic morphing capabilities. In this paper, we investigate two distinct methodologies for force estimation on Aerobat, a bio-inspired flapping-wing platform designed to emulate the inertial and aerodynamic behaviors observed in bat flight. Our goal is to quantify aerodynamic force contributions during tethered flight, a crucial step toward closed-loop flight control. The first method is a physics-based observer derived from Hamiltonian mechanics that leverages the concept of conjugate momentum to infer external aerodynamic forces acting on the robot. This observer builds on the system's reduced-order dynamic model and utilizes real-time sensor data to estimate forces without requiring training data. The second method employs a neural network-based regression model, specifically a multi-layer perceptron (MLP), to learn a mapping from joint kinematics, flapping frequency, and environmental parameters to aerodynamic force outputs. We evaluate both estimators using a 6-axis load cell in a high-frequency data acquisition setup that enables fine-grained force measurements during periodic wingbeats. The conjugate momentum observer and the regression model demonstrate strong agreement across three force components (Fx, Fy, Fz).

cs.RO↗

arXiv2025

Optimal Trajectory Planning in a Vertically Undulating Snake Locomotion using Contact-implicit Optimization

Contact-rich problems, such as snake robot locomotion, offer unexplored yet rich opportunities for optimization-based trajectory and acyclic contact planning. So far, a substantial body of control research has focused on emulating snake locomotion and replicating its distinctive movement patterns using shape functions that either ignore the complexity of interactions or focus on complex interactions with matter (e.g., burrowing movements). However, models and control frameworks that lie in between these two paradigms and are based on simple, fundamental rigid body dynamics, which alleviate the challenging contact and control allocation problems in snake locomotion, remain absent. This work makes meaningful contributions, substantiated by simulations and experiments, in the following directions: 1) introducing a reduced-order model based on Moreau's stepping-forward approach from differential inclusion mathematics, 2) verifying model accuracy, 3) experimental validation.

cs.RO↗

arXiv2025

Quadratic Programming-Based Posture Manipulation and Thrust-vectoring for Agile Dynamic Walking on Narrow Pathways

There has been significant advancement in legged robot's agility where they can show impressive acrobatic maneuvers, such as parkour. These maneuvers rely heavily on posture manipulation. To expand the stability and locomotion plasticity, we use the multi-modal ability in our legged-aerial platform, the Husky Beta, to perform thruster-assisted walking. This robot has thrusters on each of its sagittal knee joints which can be used to stabilize its frontal dynamic as it walks. In this work, we perform a simulation study of quadruped narrow-path walking with Husky $\beta$, where the robot will utilize its thrusters to stably walk on a narrow path. The controller is designed based on a centroidal dynamics model with thruster and foot ground contact forces as inputs. These inputs are regulated using a QP solver to be used in a model predictive control framework. In addition to narrow-path walking, we also perform a lateral push-recovery simulation to study how the thrusters can be used to stabilize the frontal dynamics.

cs.RO↗

arXiv2025

NMPC-based Unified Posture Manipulation and Thrust Vectoring for Fault Recovery

Multi-rotors face significant risks, as actuator failures at high altitudes can easily result in a crash and the robot's destruction. Therefore, rapid fault recovery in the event of an actuator failure is necessary for the fault-tolerant and safe operation of unmanned aerial robots. In this work, we present a fault recovery approach based on the unification of posture manipulation and thrust vectoring. The key contributions of this work are: 1) Derivation of two flight dynamics models (high-fidelity and reduced-order) that capture posture control and thrust vectoring. 2) Design of a controller based on Nonlinear Model Predictive Control (NMPC) and demonstration of fault recovery in simulation using a high-fidelity model of the Multi-Modal Mobility Morphobot (M4) in Simscape.

cs.RO↗

arXiv2025

Vision-Guided Loco-Manipulation with a Snake Robot

This paper presents the development and integration of a vision-guided loco-manipulation pipeline for Northeastern University's snake robot, COBRA. The system leverages a YOLOv8-based object detection model and depth data from an onboard stereo camera to estimate the 6-DOF pose of target objects in real time. We introduce a framework for autonomous detection and control, enabling closed-loop loco-manipulation for transporting objects to specified goal locations. Additionally, we demonstrate open-loop experiments in which COBRA successfully performs real-time object detection and loco-manipulation tasks.

cs.RO↗

arXiv2025

Reduced-Order Model-Based Gait Generation for Snake Robot Locomotion using NMPC

This paper presents an optimization-based motion planning methodology for snake robots operating in constrained environments. By using a reduced-order model, the proposed approach simplifies the planning process, enabling the optimizer to autonomously generate gaits while constraining the robot's footprint within tight spaces. The method is validated through high-fidelity simulations that accurately model contact dynamics and the robot's motion. Key locomotion strategies are identified and further demonstrated through hardware experiments, including successful navigation through narrow corridors.

cs.RO↗

arXiv2024

Self-supervised cost of transport estimation for multimodal path planning

Autonomous robots operating in real environments are often faced with decisions on how best to navigate their surroundings. In this work, we address a particular instance of this problem: how can a robot autonomously decide on the energetically optimal path to follow given a high-level objective and information about the surroundings? To tackle this problem we developed a self-supervised learning method that allows the robot to estimate the cost of transport of its surroundings using only vision inputs. We apply our method to the multi-modal mobility morphobot (M4), a robot that can drive, fly, segway, and crawl through its environment. By deploying our system in the real world, we show that our method accurately assigns different cost of transports to various types of environments e.g. grass vs smooth road. We also highlight the low computational cost of our method, which is deployed on an Nvidia Jetson Orin Nano robotic compute unit. We believe that this work will allow multi-modal robotic platforms to unlock their full potential for navigation and exploration tasks.

cs.RO↗

arXiv2024

Conjugate momentum based thruster force estimate in dynamic multimodal robot

In a multi-modal system which combines thruster and legged locomotion such our state-of-the-art Harpy platform to perform dynamic locomotion. Therefore, it is very important to have a proper estimate of Thruster force. Harpy is a bipedal robot capable of legged-aerial locomotion using its legs and thrusters attached to its main frame. we can characterize thruster force using a thrust stand but it generally does not account for working conditions such as battery voltage. In this study, we present a momentum-based thruster force estimator. One of the key information required to estimate is terrain information. we show estimation results with and without terrain knowledge. In this work, we derive a conjugate momentum thruster force estimator and implement it on a numerical simulator that uses thruster force to perform thruster-assisted walking.

cs.RO↗

arXiv2024

Enhanced Capture Point Control Using Thruster Dynamics and QP-Based Optimization for Harpy

Our work aims to make significant strides in understanding unexplored locomotion control paradigms based on the integration of posture manipulation and thrust vectoring. These techniques are commonly seen in nature, such as Chukar birds using their wings to run on a nearly vertical wall. In this work, we developed a capture-point-based controller integrated with a quadratic programming (QP) solver which is used to create a thruster-assisted dynamic bipedal walking controller for our state-of-the-art Harpy platform. Harpy is a bipedal robot capable of legged-aerial locomotion using its legs and thrusters attached to its main frame. While capture point control based on centroidal models for bipedal systems has been extensively studied, the use of these thrusters in determining the capture point for a bipedal robot has not been extensively explored. The addition of these external thrust forces can lead to interesting interpretations of locomotion, such as virtual buoyancy studied in aquatic-legged locomotion. In this work, we derive a thruster-assisted bipedal walking with the capture point controller and implement it in simulation to study its performance.

cs.RO↗

arXiv2024

Quadratic Programming Optimization for Bio-Inspired Thruster-Assisted Bipedal Locomotion on Inclined Slopes

Our work aims to make significant strides in understanding unexplored locomotion control paradigms based on the integration of posture manipulation and thrust vectoring. These techniques are commonly seen in nature, such as Chukar birds using their wings to run on a nearly vertical wall. In this work, we show quadratic programming with contact constraints which is then given to the whole body controller to map on robot states to produce a thruster-assisted slope walking controller for our state-of-the-art Harpy platform. Harpy is a bipedal robot capable of legged-aerial locomotion using its legs and thrusters attached to its main frame. The optimization-based walking controller has been used for dynamic locomotion such as slope walking, but the addition of thrusters to perform inclined slope walking has not been extensively explored. In this work, we derive a thruster-assisted bipedal walking with the quadratic programming (QP) controller and implement it in simulation to study its performance.

cs.RO↗

arXiv2024

Validation of Tumbling Robot Dynamics with Posture Manipulation for Closed-Loop Heading Angle Control

Navigating rugged terrain and steep slopes is a challenge for mobile robots. Conventional legged and wheeled systems struggle with these environments due to limited traction and stability. Northeastern University's COBRA (Crater Observing Bio-inspired Rolling Articulator), a novel multi-modal snake-like robot, addresses these issues by combining traditional snake gaits for locomotion on flat and inclined surfaces with a tumbling mode for controlled descent on steep slopes. Through dynamic posture manipulation, COBRA can modulate its heading angle and velocity during tumbling. This paper presents a reduced-order cascade model for COBRA's tumbling locomotion and validates it against a high-fidelity rigid-body simulation, presenting simulation results that show that the model captures key system dynamics.

cs.RO↗

arXiv2024

Optimization free control and ground force estimation with momentum observer for a multimodal legged aerial robot

Legged-aerial multimodal robots can make the most of both legged and aerial systems. In this paper, we propose a control framework that bypasses heavy onboard computers by using an optimization-free Explicit Reference Governor that incorporates external thruster forces from an attitude controller. Ground reaction forces are maintained within friction cone constraints using costly optimization solvers, but the ERG framework filters applied velocity references that ensure no slippage at the foot end. We also propose a Conjugate momentum observer, that is widely used in Disturbance Observation to estimate ground reaction forces and compare its efficacy against a constrained model in estimating ground reaction forces in a reduced-order simulation of Husky.

cs.RO↗

arXiv2024

Conjugate Momentum-Based Estimation of External Forces for Bio-Inspired Morphing Wing Flight

Dynamic morphing wing flights present significant challenges in accurately estimating external forces due to complex interactions between aerodynamics, rapid wing movements, and external disturbances. Traditional force estimation methods often struggle with unpredictable disturbances like wind gusts or unmodeled impacts that can destabilize flight in real-world scenarios. This paper addresses these challenges by implementing a Conjugate Momentum-based Observer, which effectively estimates and manages unknown external forces acting on the Aerobat, a bio-inspired robotic platform with dynamically morphing wings. Through simulations, the observer demonstrates its capability to accurately detect and quantify external forces, even in the presence of Gaussian noise and abrupt impulse inputs. The results validate the robustness of the method, showing improved stability and control of the Aerobat in dynamic environments. This research contributes to advancements in bio-inspired robotics by enhancing force estimation for flapping-wing systems, with potential applications in autonomous aerial navigation and robust flight control.

cs.RO↗

arXiv2024

Enabling steep slope walking on Husky using reduced order modeling and quadratic programming

Wing-assisted inclined running (WAIR) observed in some young birds, is an attractive maneuver that can be extended to legged aerial systems. This study proposes a control method using a modified Variable Length Inverted Pendulum (VLIP) by assuming a fixed zero moment point and thruster forces collocated at the center of mass of the pendulum. A QP MPC is used to find the optimal ground reaction forces and thruster forces to track a reference position and velocity trajectory. Simulation results of this VLIP model on a slope of 40 degrees is maintained and shows thruster forces that can be obtained through posture manipulation. The simulation also provides insight to how the combined efforts of the thrusters and the tractive forces from the legs make WAIR possible in thruster-assisted legged systems.

cs.RO↗

arXiv2024

Capture Point Control in Thruster-Assisted Bipedal Locomotion

Despite major advancements in control design that are robust to unplanned disturbances, bipedal robots are still susceptible to falling over and struggle to negotiate rough terrains. By utilizing thrusters in our bipedal robot, we can perform additional posture manipulation and expand the modes of locomotion to enhance the robot's stability and ability to negotiate rough and difficult-to-navigate terrains. In this paper, we present our efforts in designing a controller based on capture point control for our thruster-assisted walking model named Harpy and explore its control design possibilities. While capture point control based on centroidal models for bipedal systems has been extensively studied, the incorporation of external forces that can influence the dynamics of linear inverted pendulum models, often used in capture point-based works, has not been explored before. The inclusion of these external forces can lead to interesting interpretations of locomotion, such as virtual buoyancy studied in aquatic-legged locomotion. This paper outlines the dynamical model of our robot, the capture point method we use to assist the upper body stabilization, and the simulation work done to show the controller's feasibility.

cs.RO↗