arXiv subjects

Erik D. Demaine

Publications and source records attributed to Erik D. Demaine.

At least 109 records · Page 6Linked to original sources

arXiv2018

Rigid Foldability is NP-Hard

In this paper, we show that deciding rigid foldability of a given crease pattern using all creases is weakly NP-hard by a reduction from Partition, and that deciding rigid foldability with optional creases is strongly NP-hard by a reduction from 1-in-3 SAT. Unlike flat foldability of origami or flexibility of other kinematic linkages, whose complexity originates in the complexity of the layer ordering and possible self-intersection of the material, rigid foldability from a planar state is hard even though there is no potential self-intersection. In fact, the complexity comes from the combinatorial behavior of the different possible rigid folding configurations at each vertex. The results underpin the fact that it is harder to fold from an unfolded sheet of paper than to unfold a folded state back to a plane, frequently encountered problem when realizing folding-based systems such as self-folding matter and reconfigurable robots.

cs.CG↗

arXiv2018

Conic Crease Patterns with Reflecting Rule Lines

We characterize when two conic curved creases are compatible with each other, when the rule lines must converge to conic foci and reflect at the crease. Namely, two conics are compatible (can be connected by rule segments in a foldable curved crease pattern) if and only if they have equal or reciprocal eccentricity. Thus, circles (eccentricity 0) and parabolas (eccentricity 1) are compatible with only themselves (when scaled from a focus), and ellipses (eccentricity strictly between 0 and 1) and hyperbolas (eccentricity above 1) are compatible with themselves and each other (but only in specific pairings). The foundation of this result is a general condition relating any two curved creases connected by rule segments. We also use our characterization to analyze several curved crease designs.

cs.CG↗

arXiv2018

Structural Sparsity of Complex Networks: Bounded Expansion in Random Models and Real-World Graphs

This research establishes that many real-world networks exhibit bounded expansion, a strong notion of structural sparsity, and demonstrates that it can be leveraged to design efficient algorithms for network analysis. We analyze several common network models regarding their structural sparsity. We show that, with high probability, (1) graphs sampled with a prescribed s parse degree sequence; (2) perturbed bounded-degree graphs; (3) stochastic block models with small probabilities; result in graphs of bounded expansion. In contrast, we show that the Kleinberg and the Barabasi-Albert model have unbounded expansion. We support our findings with empirical measurements on a corpus of real-world networks.

cs.SI↗

arXiv2018

Conflict-Free Coloring of Planar Graphs

A conflict-free k-coloring of a graph assigns one of k different colors to some of the vertices such that, for every vertex v, there is a color that is assigned to exactly one vertex among v and v's neighbors. Such colorings have applications in wireless networking, robotics, and geometry, and are well-studied in graph theory. Here we study the natural problem of the conflict-free chromatic number chi_CF(G) (the smallest k for which conflict-free k-colorings exist). We provide results both for closed neighborhoods N[v], for which a vertex v is a member of its neighborhood, and for open neighborhoods N(v), for which vertex v is not a member of its neighborhood. For closed neighborhoods, we prove the conflict-free variant of the famous Hadwiger Conjecture: If an arbitrary graph G does not contain K_{k+1} as a minor, then chi_CF(G) <= k. For planar graphs, we obtain a tight worst-case bound: three colors are sometimes necessary and always sufficient. We also give a complete characterization of the computational complexity of conflict-free coloring. Deciding whether chi_CF(G)<= 1 is NP-complete for planar graphs G, but polynomial for outerplanar graphs. Furthermore, deciding whether chi_CF(G)<= 2 is NP-complete for planar graphs G, but always true for outerplanar graphs. For the bicriteria problem of minimizing the number of colored vertices subject to a given bound k on the number of colors, we give a full algorithmic characterization in terms of complexity and approximation for outerplanar and planar graphs. For open neighborhoods, we show that every planar bipartite graph has a conflict-free coloring with at most four colors; on the other hand, we prove that for k in {1,2,3}, it is NP-complete to decide whether a planar bipartite graph has a conflict-free k-coloring. Moreover, we establish that any general} planar graph has a conflict-free coloring with at most eight colors.

cs.DM↗

arXiv2018

Know When to Fold 'Em: Self-Assembly of Shapes by Folding in Oritatami

An oritatami system (OS) is a theoretical model of self-assembly via co-transcriptional folding. It consists of a growing chain of beads which can form bonds with each other as they are transcribed. During the transcription process, the $δ$ most recently produced beads dynamically fold so as to maximize the number of bonds formed, self-assemblying into a shape incrementally. The parameter $δ$ is called the delay and is related to the transcription rate in nature. This article initiates the study of shape self-assembly using oritatami. A shape is a connected set of points in the triangular lattice. We first show that oritatami systems differ fundamentally from tile-assembly systems by exhibiting a family of infinite shapes that can be tile-assembled but cannot be folded by any OS. As it is NP-hard in general to determine whether there is an OS that folds into (self-assembles) a given finite shape, we explore the folding of upscaled versions of finite shapes. We show that any shape can be folded from a constant size seed, at any scale n >= 3, by an OS with delay 1. We also show that any shape can be folded at the smaller scale 2 by an OS with unbounded delay. This leads us to investigate the influence of delay and to prove that, for all δ > 2, there are shapes that can be folded (at scale 1) with delay δ but not with delay δ'<δ. These results serve as a foundation for the study of shape-building in this new model of self-assembly, and have the potential to provide better understanding of cotranscriptional folding in biology, as well as improved abilities of experimentalists to design artificial systems that self-assemble via this complex dynamical process.

cs.DS↗

arXiv2018

Losing at Checkers is Hard

We prove computational intractability of variants of checkers: (1) deciding whether there is a move that forces the other player to win in one move is NP-complete; (2) checkers where players must always be able to jump on their turn is PSPACE-complete; and (3) cooperative versions of (1) and (2) are NP-complete. We also give cooperative checkers puzzles whose solutions are the letters of the alphabet.

cs.CC↗

arXiv2018

Computational Complexity of Motion Planning of a Robot through Simple Gadgets

We initiate a general theory for analyzing the complexity of motion planning of a single robot through a graph of "gadgets", each with their own state, set of locations, and allowed traversals between locations that can depend on and change the state. This type of setup is common to many robot motion planning hardness proofs. We characterize the complexity for a natural simple case: each gadget connects up to four locations in a perfect matching (but each direction can be traversable or not in the current state), has one or two states, every gadget traversal is immediately undoable, and that gadget locations are connected by an always-traversable forest, possibly restricted to avoid crossings in the plane. Specifically, we show that any single nontrivial four-location two-state gadget type is enough for motion planning to become PSPACE-complete, while any set of simpler gadgets (effectively two-location or one-state) has a polynomial-time motion planning algorithm. As a sample application, our results show that motion planning games with "spinners" are PSPACE-complete, establishing a new hard aspect of Zelda: Oracle of Seasons.

cs.CC↗

arXiv2018

Reconfiguration of Satisfying Assignments and Subset Sums: Easy to Find, Hard to Connect

We consider the computational complexity of reconfiguration problems, in which one is given two combinatorial configurations satisfying some constraints, and is asked to transform one into the other using elementary transformations, while satisfying the constraints at all times. Such problems appear naturally in many contexts, such as model checking, motion planning, enumeration and sampling, and recreational mathematics. We provide hardness results for problems in this family, in which the constraints and operations are particularly simple. More precisely, we prove the PSPACE-completeness of the following decision problems: $\bullet$ Given two satisfying assignments to a planar monotone instance of Not-All-Equal 3-SAT, can one assignment be transformed into the other by single variable `flips' (assignment changes), preserving satisfiability at every step? $\bullet$ Given two subsets of a set S of integers with the same sum, can one subset be transformed into the other by adding or removing at most three elements of S at a time, such that the intermediate subsets also have the same sum? $\bullet$ Given two points in $\{0,1\}^n$ contained in a polytope P specified by a constant number of linear inequalities, is there a path in the n-hypercube connecting the two points and contained in P? These problems can be interpreted as reconfiguration analogues of standard problems in NP. Interestingly, the instances of the NP problems that appear as input to the reconfiguration problems in our reductions can be shown to lie in P. In particular, the elements of S and the coefficients of the inequalities defining P can be restricted to have logarithmic bit-length.

cs.CC↗

arXiv2018

Tree-Residue Vertex-Breaking: a new tool for proving hardness

In this paper, we introduce a new problem called Tree-Residue Vertex-Breaking (TRVB): given a multigraph $G$ some of whose vertices are marked "breakable," is it possible to convert $G$ into a tree via a sequence of "vertex-breaking" operations (replacing a degree-$k$ breakable vertex by $k$ degree-$1$ vertices, disconnecting the $k$ incident edges)? We characterize the computational complexity of TRVB with any combination of the following additional constraints: $G$ must be planar, $G$ must be a simple graph, the degree of every breakable vertex must belong to an allowed list $B$, and the degree of every unbreakable vertex must belong to an allowed list $U$. The two results which we expect to be most generally applicable are that (1) TRVB is polynomially solvable when breakable vertices are restricted to have degree at most $3$; and (2) for any $k \ge 4$, TRVB is NP-complete when the given multigraph is restricted to be planar and to consist entirely of degree-$k$ breakable vertices. To demonstrate the use of TRVB, we give a simple proof of the known result that Hamiltonicity in max-degree-$3$ square grid graphs is NP-hard. We also demonstrate a connection between TRVB and the Hypergraph Spanning Tree problem. This connection allows us to show that the Hypergraph Spanning Tree problem in $k$-uniform $2$-regular hypergraphs is NP-complete for any $k \ge 4$, even when the incidence graph of the hypergraph is planar.

cs.CC↗

arXiv2018

Solving the Rubik's Cube Optimally is NP-complete

In this paper, we prove that optimally solving an $n \times n \times n$ Rubik's Cube is NP-complete by reducing from the Hamiltonian Cycle problem in square grid graphs. This improves the previous result that optimally solving an $n \times n \times n$ Rubik's Cube with missing stickers is NP-complete. We prove this result first for the simpler case of the Rubik's Square---an $n \times n \times 1$ generalization of the Rubik's Cube---and then proceed with a similar but more complicated proof for the Rubik's Cube case.

cs.CC↗

arXiv2018

Nearly Optimal Separation Between Partially And Fully Retroactive Data Structures

Since the introduction of retroactive data structures at SODA 2004, a major unsolved problem has been to bound the gap between the best partially retroactive data structure (where changes can be made to the past, but only the present can be queried) and the best fully retroactive data structure (where the past can also be queried) for any problem. It was proved in 2004 that any partially retroactive data structure with operation time $T(n,m)$ can be transformed into a fully retroactive data structure with operation time $O(\sqrt{m} \cdot T(n,m))$, where $n$ is the size of the data structure and $m$ is the number of operations in the timeline [Demaine 2004], but it has been open for 14 years whether such a gap is necessary. In this paper, we prove nearly matching upper and lower bounds on this gap for all $n$ and $m$. We improve the upper bound for $n \ll \sqrt m$ by showing a new transformation with multiplicative overhead $n \log m$. We then prove a lower bound of $\min\{n \log m, \sqrt m\}^{1-o(1)}$ assuming any of the following conjectures: - Conjecture I: Circuit SAT requires $2^{n - o(n)}$ time on $n$-input circuits of size $2^{o(n)}$. (Far weaker than the well-believed SETH conjecture, which asserts that CNF SAT with $n$ variables and $O(n)$ clauses already requires $2^{n-o(n)}$ time.) - Conjecture II: Online $(\min,+)$ product between an integer $n\times n$ matrix and $n$ vectors requires $n^{3 - o(1)}$ time. - Conjecture III (3-SUM Conjecture): Given three sets $A,B,C$ of integers, each of size $n$, deciding whether there exist $a \in A, b \in B, c \in C$ such that $a + b + c = 0$ requires $n^{2 - o(1)}$ time. Our lower bound construction illustrates an interesting power of fully retroactive queries: they can be used to quickly solve batched pair evaluation. We believe this technique can prove useful for other data structure lower bounds, especially dynamic ones.

cs.DS↗

arXiv2018

Folding Polyominoes into (Poly)Cubes

We study the problem of folding a polyomino $P$ into a polycube $Q$, allowing faces of $Q$ to be covered multiple times. First, we define a variety of folding models according to whether the folds (a) must be along grid lines of $P$ or can divide squares in half (diagonally and/or orthogonally), (b) must be mountain or can be both mountain and valley, (c) can remain flat (forming an angle of $180^\circ$), and (d) must lie on just the polycube surface or can have interior faces as well. Second, we give all the inclusion relations among all models that fold on the grid lines of $P$. Third, we characterize all polyominoes that can fold into a unit cube, in some models. Fourth, we give a linear-time dynamic programming algorithm to fold a tree-shaped polyomino into a constant-size polycube, in some models. Finally, we consider the triangular version of the problem, characterizing which polyiamonds fold into a regular tetrahedron.

cs.CG↗

arXiv2018

Flat Foldings of Plane Graphs with Prescribed Angles and Edge Lengths

When can a plane graph with prescribed edge lengths and prescribed angles (from among $\{0,180^\circ, 360^\circ$\}) be folded flat to lie in an infinitesimally thin line, without crossings? This problem generalizes the classic theory of single-vertex flat origami with prescribed mountain-valley assignment, which corresponds to the case of a cycle graph. We characterize such flat-foldable plane graphs by two obviously necessary but also sufficient conditions, proving a conjecture made in 2001: the angles at each vertex should sum to $360^\circ$, and every face of the graph must itself be flat foldable. This characterization leads to a linear-time algorithm for testing flat foldability of plane graphs with prescribed edge lengths and angles, and a polynomial-time algorithm for counting the number of distinct folded states.

cs.CG↗

arXiv2018

Computational Complexity of Generalized Push Fight

We analyze the computational complexity of optimally playing the two-player board game Push Fight, generalized to an arbitrary board and number of pieces. We prove that the game is PSPACE-hard to decide who will win from a given position, even for simple (almost rectangular) hole-free boards. We also analyze the mate-in-1 problem: can the player win in a single turn? One turn in Push Fight consists of up to two "moves" followed by a mandatory "push". With these rules, or generalizing the number of allowed moves to any constant, we show mate-in-1 can be solved in polynomial time. If, however, the number of moves per turn is part of the input, the problem becomes NP-complete. On the other hand, without any limit on the number of moves per turn, the problem becomes polynomially solvable again.

cs.CC↗

arXiv2018

Coordinated Motion Planning: Reconfiguring a Swarm of Labeled Robots with Bounded Stretch

We present a number of breakthroughs for coordinated motion planning, in which the objective is to reconfigure a swarm of labeled convex objects by a combination of parallel, continuous, collision-free translations into a given target arrangement. Problems of this type can be traced back to the classic work of Schwartz and Sharir (1983), who gave a method for deciding the existence of a coordinated motion for a set of disks between obstacles; their approach is polynomial in the complexity of the obstacles, but exponential in the number of disks. Other previous work has largely focused on {\em sequential} schedules, in which one robot moves at a time. We provide constant-factor approximation algorithms for minimizing the execution time of a coordinated, {\em parallel} motion plan for a swarm of robots in the absence of obstacles, provided some amount of separability. Our algorithm achieves {\em constant stretch factor}: If all robots are at most $d$ units from their respective starting positions, the total duration of the overall schedule is $O(d)$. Extensions include unlabeled robots and different classes of robots. We also prove that finding a plan with minimal execution time is NP-hard, even for a grid arrangement without any stationary obstacles. On the other hand, we show that for densely packed disks that cannot be well separated, a stretch factor $Ω(N^{1/4})$ may be required. On the positive side, we establish a stretch factor of $O(N^{1/2})$ even in this case.

cs.CG↗

arXiv2017

Fine-Grained I/O Complexity via Reductions: New lower bounds, faster algorithms, and a time hierarchy

This paper initiates the study of I/O algorithms (minimizing cache misses) from the perspective of fine-grained complexity (conditional polynomial lower bounds). Specifically, we aim to answer why sparse graph problems are so hard, and why the Longest Common Subsequence problem gets a savings of a factor of the size of cache times the length of a cache line, but no more. We take the reductions and techniques from complexity and fine-grained complexity and apply them to the I/O model to generate new (conditional) lower bounds as well as faster algorithms. We also prove the existence of a time hierarchy for the I/O model, which motivates the fine-grained reductions. Using fine-grained reductions, we give an algorithm for distinguishing 2 vs. 3 diameter and radius that runs in $O(|E|^2/(MB))$ cache misses, which for sparse graphs improves over the previous $O(|V|^2/B)$ running time. We give new reductions from radius and diameter to Wiener index and median. We show meaningful reductions between problems that have linear-time solutions in the RAM model. The reductions use low I/O complexity (typically $O(n/B)$), and thus help to finely capture the relationship between "I/O linear time" $Θ(n/B)$ and RAM linear time $Θ(n)$. We generate new I/O assumptions based on the difficulty of improving sparse graph problem running times in the I/O model. We create conjectures that the current best known algorithms for Single Source Shortest Paths (SSSP), diameter, and radius are optimal. From these I/O-model assumptions, we show that many of the known reductions in the word-RAM model can naturally extend to hold in the I/O model as well (e.g., a lower bound on the I/O complexity of Longest Common Subsequence that matches the best known running time). Finally, we prove an analog of the Time Hierarchy Theorem in the I/O model.

cs.DS↗

arXiv2017

Particle Computation: Complexity, Algorithms, and Logic

We investigate algorithmic control of a large swarm of mobile particles (such as robots, sensors, or building material) that move in a 2D workspace using a global input signal (such as gravity or a magnetic field). We show that a maze of obstacles to the environment can be used to create complex systems. We provide a wide range of results for a wide range of questions. These can be subdivided into external algorithmic problems, in which particle configurations serve as input for computations that are performed elsewhere, and internal logic problems, in which the particle configurations themselves are used for carrying out computations. For external algorithms, we give both negative and positive results. If we are given a set of stationary obstacles, we prove that it is NP-hard to decide whether a given initial configuration of unit-sized particles can be transformed into a desired target configuration. Moreover, we show that finding a control sequence of minimum length is PSPACE-complete. We also work on the inverse problem, providing constructive algorithms to design workspaces that efficiently implement arbitrary permutations between different configurations. For internal logic, we investigate how arbitrary computations can be implemented. We demonstrate how to encode dual-rail logic to build a universal logic gate that concurrently evaluates and, nand, nor, and or operations. Using many of these gates and appropriate interconnects, we can evaluate any logical expression. However, we establish that simulating the full range of complex interactions present in arbitrary digital circuits encounters a fundamental difficulty: a fan-out gate cannot be generated. We resolve this missing component with the help of 2x1 particles, which can create fan-out gates that produce multiple copies of the inputs. Using these gates we provide rules for replicating arbitrary digital circuits.

cs.ET↗

arXiv2017

Data Structures for Halfplane Proximity Queries and Incremental Voronoi Diagrams

We consider preprocessing a set $S$ of $n$ points in convex position in the plane into a data structure supporting queries of the following form: given a point $q$ and a directed line $\ell$ in the plane, report the point of $S$ that is farthest from (or, alternatively, nearest to) the point $q$ among all points to the left of line $\ell$. We present two data structures for this problem. The first data structure uses $O(n^{1+\varepsilon})$ space and preprocessing time, and answers queries in $O(2^{1/\varepsilon} \log n)$ time, for any $0 < \varepsilon < 1$. The second data structure uses $O(n \log^3 n)$ space and polynomial preprocessing time, and answers queries in $O(\log n)$ time. These are the first solutions to the problem with $O(\log n)$ query time and $o(n^2)$ space. The second data structure uses a new representation of nearest- and farthest-point Voronoi diagrams of points in convex position. This representation supports the insertion of new points in clockwise order using only $O(\log n)$ amortized pointer changes, in addition to $O(\log n)$-time point-location queries, even though every such update may make $Θ(n)$ combinatorial changes to the Voronoi diagram. This data structure is the first demonstration that deterministically and incrementally constructed Voronoi diagrams can be maintained in $o(n)$ amortized pointer changes per operation while keeping $O(\log n)$-time point-location queries.

cs.CG↗