arXiv subjects

Erik G. Larsson

Publications and source records attributed to Erik G. Larsson.

At least 181 records · Page 10Linked to original sources

arXiv2019

Dynamic Scheduling and Power Control in Uplink Massive MIMO with Random Data Arrivals

In this paper, we study the joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with random data arrivals. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmission queues and the transmission rates over the wireless channel. The proposed algorithm achieves nearly optimal performance on the long-term user throughput under various fairness policies. Simulation results show that the DSA can improve the time-average delay performance compared to the state-of-the-art power control schemes developed for Massive MIMO with infinite backlogs.

cs.NI↗

arXiv2019

Sum Spectral Efficiency Maximization in Massive MIMO Systems: Benefits from Deep Learning

This paper investigates the joint data and pilot power optimization for maximum sum spectral efficiency (SE) in multi-cell Massive MIMO systems, which is a non-convex problem. We first propose a new optimization algorithm, inspired by the weighted minimum mean square error (MMSE) approach, to obtain a stationary point in polynomial time. We then use this algorithm together with deep learning to train a convolutional neural network to perform the joint data and pilot power control in sub-millisecond runtime, making it suitable for online optimization in real multi-cell Massive MIMO systems. The numerical result demonstrates that the solution obtained by the neural network is $1\%$ less than the stationary point for four-cell systems, while the sum SE loss is $2\%$ in a nine-cell system.

cs.IT↗

arXiv2019

Age of Information in a Multiple Access Channel with Heterogeneous Traffic and an Energy Harvesting Node

Age of Information (AoI) is a newly appeared concept and metric to characterize the freshness of data. In this work, we study the delay and AoI in a multiple access channel (MAC) with two source nodes transmitting different types of data to a common destination. The first node is grid-connected and its data packets arrive in a bursty manner, and at each time slot it transmits one packet with some probability. Another energy harvesting (EH) sensor node generates a new status update with a certain probability whenever it is charged. We derive the delay of the grid-connected node and the AoI of the EH sensor as functions of different parameters in the system. The results show that the mutual interference has a non-trivial impact on the delay and age performance of the two nodes.

cs.IT↗

arXiv2019

Optimized Power Control for Massive MIMO with Underlaid D2D Communications

In this paper, we consider device-to-device (D2D) communication that is underlaid in a multi-cell massive multiple-input multiple-output (MIMO) system and propose a new framework for power control and pilot allocation. In this scheme, the cellular users (CUs) in each cell get orthogonal pilots which are reused with reuse factor one across cells, while all the D2D pairs share another set of orthogonal pilots. We derive a closed-form capacity lower bound for the CUs with different receive processing schemes. In addition, we derive a capacity lower bound for the D2D receivers and a closed-form approximation of it. We provide power control algorithms to maximize the minimum spectral efficiency (SE) and maximize the product of the signal-to-interference-plus-noise ratios in the network. Different from prior works, in our proposed power control schemes, we consider joint pilot and data transmission optimization. Finally, we provide a numerical evaluation where we compare our proposed power control schemes with the maximum transmit power case and the case of conventional multi-cell massive MIMO without D2D communication. Based on the provided results, we conclude that our proposed scheme increases the sum SE of multi-cell massive MIMO networks.

cs.IT↗

arXiv2019

Physical Adversarial Attacks Against End-to-End Autoencoder Communication Systems

We show that end-to-end learning of communication systems through deep neural network (DNN) autoencoders can be extremely vulnerable to physical adversarial attacks. Specifically, we elaborate how an attacker can craft effective physical black-box adversarial attacks. Due to the openness (broadcast nature) of the wireless channel, an adversary transmitter can increase the block-error-rate of a communication system by orders of magnitude by transmitting a well-designed perturbation signal over the channel. We reveal that the adversarial attacks are more destructive than jamming attacks. We also show that classical coding schemes are more robust than autoencoders against both adversarial and jamming attacks. The codes are available at [1].

cs.IT↗

arXiv2019

Joint Transmit and Circuit Power Minimization in Massive MIMO with Downlink SINR Constraints: When to Turn on Massive MIMO?

In this work, we consider the downlink of a multi-cell multiple-input multiple-output (MIMO) system and find the jointly optimal number of base station (BS) antennas and transmission powers that minimize the power consumption while satisfying each user's effective signal-to-interference-and-noise-ratio (SINR) constraint and the BSs' power constraints. Different from prior work, we consider a power consumption model that takes both transmitted and hardware-consumed power into account. We formulate the joint optimization problem for both single-cell and multi-cell systems. Closed-form expressions for the optimal number of BS antennas and transmission powers are derived for the single-cell case. The analysis for the multi-cell case reveals that increasing the number of BS antennas in any cell always improves the performance of the overall system in terms of both feasibility and total radiated power. A key contribution of this work is to show that the joint optimization problem can be relaxed as a geometric programming problem that can be solved efficiently. The solution can be utilized in practice to turn on and off antennas depending on the traffic load variations. Substantial power savings are demonstrated by simulation.

cs.IT↗

arXiv2019

Can Massive MIMO Support Uplink Intensive Applications?

Current outdoor mobile network infrastructure cannot support uplink intensive mobile applications such as connected vehicles that collect and upload large amount of real time data. Our investigation reveals that with maximum-ratio (MR) decoding, it is theoretically impossible to support such applications with cell-free Massive MIMO, and it requires a very large number of service antennas in single cell configuration, making it practically infeasible; but with zero-forcing (ZF) decoding, such applications can be easily supported by cell-free Massive MIMO with very moderate number of access points (AP's), and it requires a lot more service antennas in single cell configuration. Via the newly derived SINR expressions for cell-free Massive MIMO with ZF decoding we show that uplink power control is unnecessary, and that with 10 MHz effective bandwidth for uplink data transmission, in urban and suburban morphologies, on the 2 GHz band, 90 single antenna AP's per square kilometer and 32 single antenna AP's per square kilometer are enough to support 18 autonomous vehicles respectively. In rural morphology, using 450 MHz band, only 2 single antenna AP's per square kilometer is enough.

cs.IT↗

arXiv2019

Techniques for System Information Broadcast in Cell-Free Massive MIMO

We consider transmission of system information in a cell-free massive MIMO system, when the transmitting access points do not have any channel state information and the receiving terminal has to estimate the channel based on downlink pilots. We analyze the system performance in terms of outage rate and coverage probability, and use space-time block codes to increase performance. We propose a heuristic method for pilot/data power optimization that can be applied without any channel state information at the access points. We also analyze the problem of grouping the access points, which is needed when the single-antenna access points jointly transmit a space-time block code.

cs.IT↗

arXiv2019

Massive MIMO in Sub-6 GHz and mmWave: Physical, Practical, and Use-Case Differences

The use of base stations (BSs) and access points (APs) with a large number of antennas, called Massive MIMO (multiple-input multiple-output), is a key technology for increasing the capacity of 5G networks and beyond. While originally conceived for conventional sub-6GHz frequencies, Massive MIMO (mMIMO) is ideal also for frequency bands in the range 30-300 GHz, known as millimeter wave (mmWave). Despite conceptual similarities, the way in which mMIMO can be exploited in these bands is radically different, due to their specific propagation behaviors and hardware characteristics. This paper reviews these differences and their implications, while dispelling common misunderstandings. Building on this foundation, we suggest appropriate signal processing schemes and use cases to efficiently exploit mMIMO in both frequency bands.

cs.IT↗

arXiv2019

How Energy-Efficient Can a Wireless Communication System Become?

The data traffic in wireless networks is steadily growing. The long-term trend follows Cooper's law, where the traffic is doubled every two-and-a-half year, and it will likely continue for decades to come. The data transmission is tightly connected with the energy consumption in the power amplifiers, transceiver hardware, and baseband processing. The relation is captured by the energy efficiency metric, measured in bit/Joule, which describes how much energy is consumed per correctly received information bit. While the data rate is fundamentally limited by the channel capacity, there is currently no clear understanding of how energy-efficient a communication system can become. Current research papers typically present values on the order of 10 Mbit/Joule, while previous network generations seem to operate at energy efficiencies on the order of 10 kbit/Joule. Is this roughly as energy-efficient future systems (5G and beyond) can become, or are we still far from the physical limits? These questions are answered in this paper. We analyze a different cases representing potential future deployment and hardware characteristics.

cs.IT↗

arXiv2019

Optimal Channel Estimation for Reciprocity-Based Backscattering with a Full-Duplex MIMO Reader

Backscatter communication (BSC) technology can enable ubiquitous deployment of low-cost sustainable wireless devices. In this work we investigate the efficacy of a full-duplex multiple-input-multiple-output (MIMO) reader for enhancing the limited communication range of monostatic BSC systems. As this performance is strongly influenced by the channel estimation (CE) quality, we first derive a novel least-squares estimator for the forward and backward links between the reader and the tag, assuming that reciprocity holds and K orthogonal pilots are transmitted from the first K antennas of an N antenna reader. We also obtain the corresponding linear minimum-mean square-error estimate for the backscattered channel. After defining the transceiver design at the reader using these estimates, we jointly optimize the number of orthogonal pilots and energy allocation for the CE and information decoding phases to maximize the average backscattered signal-to-noise ratio (SNR) for efficiently decoding the tag's messages. The unimodality of this SNR in optimization variables along with a tight analytical approximation for the jointly global optimal design is also discoursed. Lastly, the selected numerical results validate the proposed analysis, present key insights into the optimal resource utilization at reader, and quantify the achievable gains over the benchmark schemes.

cs.IT↗

arXiv2018

On the Performance of Backhaul Constrained Cell-Free Massive MIMO with Linear Receivers

Limited-backhaul cell-free Massive multiple-input multiple-output (MIMO), in which the fog radio access network (F-RAN) is implemented to exchange the information between access points (APs) and the central processing unit (CPU), is investigated. We introduce a novel approach where the APs estimate the channel and send back the quantized version of the estimated channel and the quantized version of the received signal to the central processing unit. The Max algorithm and the Bussgang theorem are exploited to model the optimum uniform quantization. The ergodic achievable rates are derived. We show that exploiting microwave wireless backhaul links and using a small number of bits to quantize the estimated channel and the received signal, the performance of limited-backhaul cell-free Massive MIMO closely approaches the performance of cell-free Massive MIMO with perfect backhaul links.

cs.IT↗

arXiv2018

$M$-QAM Precoder Design for MIMO Directional Modulation Transceivers

Spectrally efficient multi-antenna wireless communication systems are a key challenge as service demands continue to increase. At the same time, powering up radio access networks is facing environmental and regulation limitations. In order to achieve more power efficiency, we design a directional modulation precoder by considering an $M$-QAM constellation, particularly with $M=4,8,16,32$. First, extended detection regions are defined for desired constellations using analytical geometry. Then, constellation points are placed in the optimal positions of these regions while the minimum Euclidean distance to adjacent constellation points and detection region boundaries is kept as in the conventional $M$-QAM modulation. For further power efficiency and symbol error rate similar to that of fixed design in high SNR, relaxed detection regions are modeled for inner points of $M=16,32$ constellations. The modeled extended and relaxed detection regions as well as the modulation characteristics are utilized to formulate symbol-level precoder design problems for directional modulation to minimize the transmission power while preserving the minimum required SNR at the destination. In addition, the extended and relaxed detection regions are used for precoder design to minimize the output of each power amplifier. We transform the design problems into convex ones and devise an interior point path-following iterative algorithm to solve the mentioned problems and provide details on finding the initial values of the parameters and the starting point. Results show that compared to the benchmark schemes, the proposed method performs better in terms of power and peak power reduction as well as symbol error rate reduction for a wide range of SNRs.

cs.IT↗

arXiv2018

Power Control for D2D Underlay in Multi-cell Massive MIMO Networks

This paper proposes a new power control and pilot allocation scheme for device-to-device (D2D) communication underlaying a multi-cell massive MIMO system. In this scheme, the cellular users in each cell get orthogonal pilots which are reused with reuse factor one across cells, while the D2D pairs share another set of orthogonal pilots. We derive a closed-form capacity lower bound for the cellular users with different receive processing schemes. In addition, we derive a capacity lower bound for the D2D receivers and a closed-form approximation of it. Then we provide a power control algorithm that maximizes the minimum spectral efficiency (SE) of the users in the network. Finally, we provide a numerical evaluation where we compare our proposed power control algorithm with the maximum transmit power case and the case of conventional multi-cell massive MIMO without D2D communication. Based on the provided results, we conclude that our proposed scheme increases the sum spectral efficiency of multi-cell massive MIMO networks.

cs.IT↗

arXiv2018

What Role Can NOMA Play in Massive MIMO?

This paper seeks to answer a simple but fundamental question: What role can NOMA play in massive MIMO? It is well-established that power-domain non-orthogonal multiple access (NOMA) schemes can outperform conventional orthogonal multiple access (OMA) schemes in cellular networks. However, this fact does not imply that NOMA is the most efficient way to communicate in massive MIMO setups, where the base stations have many more antennas than there are users in the cell. These setups are becoming the norm in future networks and are usually studied by assuming spatial multiplexing of the users using linear multi-user beamforming. To answer the above question, we analyze and compare the performance achieved by NOMA and multi-user beamforming in both NLOS and LOS scenarios. We reveal that the latter scheme gives the highest average sum rate in massive MIMO setups. We also identify specific cases where NOMA is the better choice in massive MIMO and explain how NOMA plays an essential role in creating a hybrid of NOMA and multi-user beamforming that is shown to perform better than two standalone schemes do.

cs.IT↗

arXiv2018

Humans and Machines can be Jointly Spatially Multiplexed by Massive MIMO

Future cellular networks are expected to support new communication paradigms such as machine-type communication (MTC) services along with conventional human-type communication (HTC) services. This requires base stations to serve a large number of devices in relatively short channel coherence intervals, which renders allocation of orthogonal pilot sequences per-device in each cell impractical. Furthermore, the stringent power constraints, place-and-play type connectivity and various data rate requirements of MTC devices make it impossible for the traditional cellular architecture to accommodate MTC and HTC services together. Massive multiple-input-multiple-output (mMIMO) technology has the potential to allow the coexistence of HTC and MTC services, thanks to its inherent spatial multiplexing properties and low transmission power requirements. In this work, we first tackle the optimal non-orthogonal pilot design problem and demonstrate that the optimal pilot sequences are Welch bound equality sequences. In the second part, we investigate the performance of a single cell under a shared physical channel assumption for MTC and HTC services and propose a novel scheme for sharing the time-frequency resources. The analysis reveals that mMIMO can significantly enhance the performance of such a setup and allow the inclusion of MTC services into the cellular networks without requiring additional resources.

cs.IT↗

arXiv2018

Adversarial Attacks on Deep-Learning Based Radio Signal Classification

Deep learning (DL), despite its enormous success in many computer vision and language processing applications, is exceedingly vulnerable to adversarial attacks. We consider the use of DL for radio signal (modulation) classification tasks, and present practical methods for the crafting of white-box and universal black-box adversarial attacks in that application. We show that these attacks can considerably reduce the classification performance, with extremely small perturbations of the input. In particular, these attacks are significantly more powerful than classical jamming attacks, which raises significant security and robustness concerns in the use of DL-based algorithms for the wireless physical layer.

cs.IT↗

arXiv2018

Multi-Cell Massive MIMO in LoS

We consider a multi-cell Massive MIMO system in a line-of-sight (LoS) propagation environment, for which each user is served by one base station, with no cooperation among the base stations. Each base station knows the channel between its service antennas and its users, and uses these channels for precoding and decoding. Under these assumptions we derive explicit downlink and uplink effective SINR formulas for maximum-ratio (MR) processing and zero-forcing (ZF) processing. We also derive formulas for power control to meet pre-determined SINR targets. A numerical example demonstrating the usage of the derived formulas is provided.

eess.SP↗