arXiv subjects

Erik G. Larsson

Publications and source records attributed to Erik G. Larsson.

At least 217 records · Page 12Linked to original sources

arXiv2017

Multigroup Multicast Precoding in Massive MIMO

Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user terminals (UTs). With the advent of massive multiple-input-multiple-output (MIMO), PLM has become more challenging, as the computational complexity of the precoder design is proportional to the number of BS antennas. In this paper, we address these issues by introducing computationally efficient precoders that account for practical CSI acquisition. We derive achievable spectral efficiency expressions for the proposed precoders. Then we introduce a novel problem formulation for the max-min fairness power control that accounts the CSI acquisition overhead, uplink training and downlink transmission powers. We solve this problem and find the optimal uplink and downlink power control policies in closed form. Using numerical simulations, we verify the effectiveness of our proposed schemes compared to the-state-of-the-art PLM schemes for massive MIMO systems.

cs.IT↗

arXiv2017

Device Activity and Embedded Information Bit Detection Using AMP in Massive MIMO

Future cellular networks will support a massive number of devices as a result of emerging technologies such as Internet-of-Things and sensor networks. Enhanced by machine type communication (MTC), low-power low-complex devices in the order of billions are projected to receive service from cellular networks. Contrary to traditional networks which are designed to handle human driven traffic, future networks must cope with MTC based systems that exhibit sparse traffic properties, operate with small packets and contain a large number of devices. Such a system requires smarter control signaling schemes for efficient use of system resources. In this work, we consider a grant-free random access cellular network and propose an approach which jointly detects user activity and single information bit per packet. The proposed approach is inspired by the approximate message passing (AMP) and demonstrates a superior performance compared to the original AMP approach. Furthermore, the numerical analysis reveals that the performance of the proposed approach scales with number of devices, which makes it suitable for user detection in cellular networks with massive number of devices.

cs.IT↗

arXiv2017

Optimal Base Station Design with Limited Fronthaul: Massive Bandwidth or Massive MIMO?

To reach a cost-efficient 5G architecture, the use of remote radio heads connected through a fronthaul to baseband controllers is a promising solution. However, the fronthaul links must support high bit rates as 5G networks are projected to use wide bandwidths and many antennas. Upgrading all of the existing fronthaul connections would be cumbersome, while replacing the remote radio head and upgrading the software in the baseband controllers is relatively simple. In this paper, we consider the uplink and seek the answer to the question: If we have a fixed fronthaul capacity and can deploy any technology in the remote radio head, what is the optimal technology? In particular, we optimize the number of antennas, quantization bits and bandwidth to maximize the sum rate under a fronthaul capacity constraint. The analytical results suggest that operating with many antennas equipped with low-resolution analog-to-digital converters, while the interplay between number of antennas and bandwidth depends on various parameters. The numerical analysis provides further insights into the design of communication systems with limited fronthaul capacity.

cs.IT↗

arXiv2017

Random Pilot and Data Access in Massive MIMO for Machine-type Communications

A massive MIMO system, represented by a base station with hundreds of antennas, is capable of spatially multiplexing many devices and thus naturally suited to serve dense crowds of wireless devices in emerging applications, such as machine-type communications. Crowd scenarios pose new challenges in the pilot-based acquisition of channel state information and call for pilot access protocols that match the intermittent pattern of device activity. A joint pilot assignment and data transmission protocol based on random access is proposed in this paper for the uplink of a massive MIMO system. The protocol relies on the averaging across multiple transmission slots of the pilot collision events that result from the random access process. We derive new uplink sum rate expressions that take pilot collisions, intermittent device activity, and interference into account. Simplified bounds are obtained and used to optimize the device activation probability and pilot length. A performance analysis indicates how performance scales as a function of the number of antennas and the transmission slot duration.

cs.IT↗

arXiv2017

Max-Min Fair Transmit Precoding for Multi-group Multicasting in Massive MIMO

This paper considers the downlink precoding for physical layer multicasting in massive multiple-input-multiple-output (MIMO) systems. We study the max-min fairness (MMF) problem, where channel state information (CSI) at the transmitter is used to design precoding vectors that maximize the minimum spectral efficiency (SE) of the system, given fixed power budgets for uplink training and downlink transmission. Our system model accounts for channel estimation, pilot contamination, arbitrary pathlosses, and multi-group multicasting. We consider six scenarios with different transmission technologies (unicast and multicast), different pilot assignment strategies (dedicated or shared pilot assignments), and different precoding schemes (maximum ratio transmission and zero forcing), and derive achievable spectral efficiencies for all possible combinations. Then we solve the MMF problem for each of these scenarios and for any given pilot length we find the SE maximizing uplink pilot and downlink data transmission policies, all in closed-forms. We use these results to draw a general guideline for massive MIMO multicasting design, where for a given number of base station antennas, number of users, and coherence interval length, we determine the multicasting scheme that shall be used.

cs.IT↗

arXiv2017

Out-of-Band Radiation from Large Antenna Arrays

Co-existing wireless systems, which share a common spectrum, need to mitigate out-of-band (OOB) radiation to avoid excessive interference. For legacy systems, OOB radiation is well understood and is commonly handled by digital precompensation techniques. When using large arrays, however, new phenomena and hardware limitations have to be considered. First, signals can be radiated directionally, which might focus the OOB radiation. Second, low-complexity hardware is used for cost reasons, which increases the relative amount of OOB radiation. Given that massive MIMO and millimeter wave communication rely on base stations with a large number of antennas, the spatial behavior of OOB radiation from large arrays will have significant implications for the hardware requirements of future base stations. We show that, if the OOB radiation is beamformed, its array gain is never larger than that of the in-band signal. In many cases, the OOB radiation is close to isotropic even when the in-band signal is highly directive. With the same total radiated power, the OOB radiation from large arrays is therefore never more severe than from a legacy system with the same adjacent-channel-leakage ratio. Further, the OOB radiation is less detrimental than from a legacy system since the high array gain of the in-band signal allows large arrays to radiate less total power than legacy systems. We also show how OOB radiation from large arrays varies with location in static propagation environments and how these effects vanish when averaged over the small-scale fading. Since a higher relative amount of OOB radiation can be tolerated for large arrays, the linearity requirement can be relaxed as compared to legacy systems. Specifically, less stringent linearity requirements on each transmitter makes it possible to build large arrays from low-complexity hardware.

cs.IT↗

arXiv2017

Massive MIMO Performance - TDD Versus FDD: What Do Measurements Say?

Downlink beamforming in Massive MIMO either relies on uplink pilot measurements - exploiting reciprocity and TDD operation, or on the use of a predetermined grid of beams with user equipments reporting their preferred beams, mostly in FDD operation. Massive MIMO in its originally conceived form uses the first strategy, with uplink pilots, whereas there is currently significant commercial interest in the second, grid-of-beams. It has been analytically shown that in isotropic scattering (independent Rayleigh fading) the first approach outperforms the second. Nevertheless there remains controversy regarding their relative performance in practice. In this contribution, the performances of these two strategies are compared using measured channel data at 2.6 GHz.

cs.IT↗

arXiv2017

Random Access Protocols for Massive MIMO

5G wireless networks are expected to support new services with stringent requirements on data rates, latency and reliability. One novel feature is the ability to serve a dense crowd of devices, calling for radically new ways of accessing the network. This is the case in machine-type communications, but also in urban environments and hotspots. In those use cases, the high number of devices and the relatively short channel coherence interval do not allow per-device allocation of orthogonal pilot sequences. This article motivates the need for random access by the devices to pilot sequences used for channel estimation, and shows that Massive MIMO is a main enabler to achieve fast access with high data rates, and delay-tolerant access with different data rate levels. Three pilot access protocols along with data transmission protocols are described, fulfilling different requirements of 5G services.

cs.IT↗

arXiv2017

Joint Pilot Sequence Design and Power Control for Max-Min Fairness in Uplink Massive MIMO

This paper optimizes the pilot assignment and pilot transmit powers to mitigate pilot contamination in Massive MIMO (multiple-input multiple-output) systems. While prior works have treated pilot assignment as a combinatorial problem, we achieve a more tractable problem formulation by directly optimizing the pilot sequences. To this end, we compute a lower bound on the uplink (UL) spectral efficiency (SE), for Rayleigh fading channels with maximum ratio (MR) detection and arbitrary pilot sequences. We optimize the max-min SE with respect to the pilot sequences and pilot powers, under power budget constraints. This becomes an NP-hard signomial problem, but we propose an efficient algorithm to obtain a local optimum with polynomial complexity. Numerical results manifest the near optimality of the proposed algorithm and show significant gains over existing suboptimal algorithms.

cs.IT↗

arXiv2017

Jamming-Resistant Receivers for the Massive MIMO Uplink

We design a jamming-resistant receiver scheme to enhance the robustness of a massive MIMO uplink system against jamming. We assume that a jammer attacks the system both in the pilot and data transmission phases. The key feature of the proposed scheme is that, in the pilot phase, we estimate not only the legitimate channel, but also the jamming channel by exploiting a purposely unused pilot sequence. The jamming channel estimate is used to constructed linear receive filters that reject the impact of the jamming signal. The performance of the proposed scheme is analytically evaluated using asymptotic properties of massive MIMO. The optimal regularized zero-forcing receiver and the optimal power allocation are also studied. Numerical results are provided to verify our analysis and show that the proposed scheme greatly improves the achievable rates, as compared to conventional receivers. Interestingly, the proposed scheme works particularly well under strong jamming attacks, since the improved estimate of the jamming channel outweighs the extra jamming power.

cs.IT↗

arXiv2017

Jamming Resistant Receivers for Massive MIMO

We design jamming resistant receivers to enhance the robustness of a massive MIMO uplink channel against jamming. In the pilot phase, we estimate not only the desired channel, but also the jamming channel by exploiting purposely unused pilot sequences. The jamming channel estimate is used to construct the linear receive filter to reduce impact that jamming has on the achievable rates. The performance of the proposed scheme is analytically and numerically evaluated. These results show that the proposed scheme greatly improves the rates, as compared to conventional receivers. Moreover, the proposed schemes still work well with stronger jamming power.

cs.IT↗

arXiv2017

A Random Access Protocol for Pilot Allocation in Crowded Massive MIMO Systems

The Massive MIMO (multiple-input multiple-output) technology has great potential to manage the rapid growth of wireless data traffic. Massive MIMO achieves tremendous spectral efficiency by spatial multiplexing of many tens of user equipments (UEs). These gains are only achieved in practice if many more UEs can connect efficiently to the network than today. As the number of UEs increases, while each UE intermittently accesses the network, the random access functionality becomes essential to share the limited number of pilots among the UEs. In this paper, we revisit the random access problem in the Massive MIMO context and develop a reengineered protocol, termed strongest-user collision resolution (SUCRe). An accessing UE asks for a dedicated pilot by sending an uncoordinated random access pilot, with a risk that other UEs send the same pilot. The favorable propagation of Massive MIMO channels is utilized to enable distributed collision detection at each UE, thereby determining the strength of the contenders' signals and deciding to repeat the pilot if the UE judges that its signal at the receiver is the strongest. The SUCRe protocol resolves the vast majority of all pilot collisions in crowded urban scenarios and continues to admit UEs efficiently in overloaded networks.

cs.IT↗

arXiv2017

Cell-Free Massive MIMO versus Small Cells

A Cell-Free Massive MIMO (multiple-input multiple-output) system comprises a very large number of distributed access points (APs)which simultaneously serve a much smaller number of users over the same time/frequency resources based on directly measured channel characteristics. The APs and users have only one antenna each. The APs acquire channel state information through time-division duplex operation and the reception of uplink pilot signals transmitted by the users. The APs perform multiplexing/de-multiplexing through conjugate beamforming on the downlink and matched filtering on the uplink. Closed-form expressions for individual user uplink and downlink throughputs lead to max-min power control algorithms. Max-min power control ensures uniformly good service throughout the area of coverage. A pilot assignment algorithm helps to mitigate the effects of pilot contamination, but power control is far more important in that regard. Cell-Free Massive MIMO has considerably improved performance with respect to a conventional small-cell scheme, whereby each user is served by a dedicated AP, in terms of both 95%-likely per-user throughput and immunity to shadow fading spatial correlation. Under uncorrelated shadow fading conditions, the cell-free scheme provides nearly 5-fold improvement in 95%-likely per-user throughput over the small-cell scheme, and 10-fold improvement when shadow fading is correlated.

cs.IT↗

arXiv2016

No Downlink Pilots are Needed in TDD Massive MIMO

We consider the Massive Multiple-Input Multiple-Output (MIMO) downlink with maximum-ratio and zero-forcing processing and time-division duplex (TDD) operation. To decode, the terminals must know their instantaneous effective channel gain. Conventionally, it is assumed that by virtue of channel hardening, this instantaneous gain is close to its average and hence that terminals can rely on knowledge of that average (also known as statistical channel information). However, in some propagation environments, such as keyhole channels, channel hardening does not hold. We propose a blind algorithm to estimate the effective channel gain at each user, that does not require any downlink pilots. We derive a capacity lower bound of each user for our proposed scheme, applicable to any propagation channel. Compared to the case of no downlink pilots (relying on channel hardening), and compared to training-based estimation using downlink pilots, our blind algorithm performs significantly better. The difference is especially pronounced in environments that do not offer channel hardening.

cs.IT↗

arXiv2016

Optimal Pilot and Payload Power Control in Single-Cell Massive MIMO Systems

This paper considers the jointly optimal pilot and data power allocation in single-cell uplink massive multiple-input-multiple-output (MIMO) systems. Using the spectral efficiency (SE) as performance metric and setting a total energy budget per coherence interval, the power control is formulated as optimization problems for two different objective functions: the weighted minimum SE among the users and the weighted sum SE. A closed form solution for the optimal length of the pilot sequence is derived. The optimal power control policy for the former problem is found by solving a simple equation with a single variable. Utilizing the special structure arising from imperfect channel estimation, a convex reformulation is found to solve the latter problem to global optimality in polynomial time. The gain of the optimal joint power control is theoretically justified, and is proved to be large in the low SNR regime. Simulation results also show the advantage of optimizing the power control over both pilot and data power, as compared to the cases of using full power and of only optimizing the data powers as done in previous work.

cs.IT↗

arXiv2016

Achievable Uplink Rates for Massive MIMO with Coarse Quantization

The high hardware complexity of a massive MIMO base station, which requires hundreds of radio chains, makes it challenging to build commercially. One way to reduce the hardware complexity and power consumption of the receiver is to lower the resolution of the analog-to-digital converters (ADCs). We derive an achievable rate for a massive MIMO system with arbitrary quantization and use this rate to show that ADCs with as low as 3 bits can be used without significant performance loss at spectral efficiencies around 3.5 bpcu per user, also under interference from stronger transmitters and with some imperfections in the automatic gain control.

cs.IT↗

arXiv2016

Uplink Performance of Wideband Massive MIMO with One-Bit ADCs

Analog-to-digital converters (ADCs) stand for a significant part of the total power consumption in a massive MIMO base station. One-bit ADCs are one way to reduce power consumption. This paper presents an analysis of the spectral efficiency of single-carrier and OFDM transmission in massive MIMO systems that use one-bit ADCs. A closed-form achievable rate, i.e., a lower bound on capacity, is derived for a wideband system with a large number of channel taps that employs low-complexity linear channel estimation and symbol detection. Quantization results in two types of error in the symbol detection. The circularly symmetric error becomes Gaussian in massive MIMO and vanishes as the number of antennas grows. The amplitude distortion, which severely degrades the performance of OFDM, is caused by variations between symbol durations in received interference energy. As the number of channel taps grows, the amplitude distortion vanishes and OFDM has the same performance as single-carrier transmission. A main conclusion of this paper is that wideband massive MIMO systems work well with one-bit ADCs.

cs.IT↗

arXiv2016

On the Performance of Cell-Free Massive MIMO with Short-Term Power Constraints

In this paper we consider a time-division duplex cell-free massive multiple-input multiple-output (MIMO) system where many distributed access points (APs) simultaneously serve many users. A normalized conjugate beamforming scheme, which satisfies short-term average power constraints at the APs, is proposed and analyzed taking into account the effect of imperfect channel information. We derive an approximate closed-form expression for the per-user achievable downlink rate of this scheme. We also provide, analytically and numerically, a performance comparison between the normalized conjugate beamforming and the conventional conjugate beamforming scheme in [1] (which satisfies long-term average power constraints). Normalized conjugate beamforming scheme reduces the beamforming uncertainty gain, which comes from the users' lack of the channel state information knowledge, and hence, it improves the achievable downlink rate compared to the conventional conjugate beamforming scheme.

cs.IT↗