arXiv subjects

Erik G. Larsson

Publications and source records attributed to Erik G. Larsson.

At least 145 records · Page 8Linked to original sources

arXiv2020

MMSE-Optimal Sequential Processing for Cell-Free Massive MIMO With Radio Stripes

Cell-free massive multiple-input-multiple-output (mMIMO) is an emerging technology for beyond 5G with its promising features such as higher spectral efficiency and superior spatial diversity as compared to conventional multiple-input-multiple-output (MIMO) technology. The main working principle of cell-free mMIMO is that many distributed access points (APs) cooperate simultaneously to serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture with a sequential fronthaul between the APs. A novel uplink sequential processing algorithm is developed which is proved to be optimal in both the maximum spectral efficiency (SE) and the minimum mean square error (MSE) sense. A detailed quantitative analysis of the fronthaul requirement or signaling of the proposed algorithm and its comparison with competing sub-optimal algorithms is provided. Key conclusions and implications are summarized in the form of corollaries. Based on the analytical and numerical simulation results, we conclude that the proposed scheme can greatly reduce the fronthaul signaling, without compromising the communication performance.

cs.IT↗

arXiv2020

Massive Machine Type Communication Pilot-Hopping Sequence Detection Architectures Based on Non-Negative Least Squares for Grant-Free Random Access

User activity detection in grant-free random access massive machine type communication (mMTC) using pilot-hopping sequences can be formulated as solving a non-negative least squares (NNLS) problem. In this work, two architectures using different algorithms to solve the NNLS problem is proposed. The algorithms are implemented using a fully parallel approach and fixed-point arithmetic, leading to high detection rates and low power consumption. The first algorithm, fast projected gradients, converges faster to the optimal value. The second algorithm, multiplicative updates, is partially implemented in the logarithmic domain, and provides a smaller chip area and lower power consumption. For a detection rate of about one million detections per second, the chip area for the fast algorithm is about 0.7 mm$^2$ compared to about 0.5 mm$^2$ for the multiplicative algorithm when implemented in a 28 nm FD-SOI standard cell process at 1 V power supply voltage. The energy consumption is about 300 nJ/detection for the fast projected gradient algorithm using 256 iterations, leading to a convergence close to the theoretical. With 128 iterations, about 250 nJ/detection is required, with a detection performance on par with 192 iterations of the multiplicative algorithm for which about 100 nJ/detection is required.

eess.SP↗

arXiv2020

Max-Min Power Control in Downlink Massive MIMO with Distributed Antenna Arrays

In this paper, we investigate optimal downlink power allocation in massive multiple-input multiple-output (MIMO) networks with distributed antenna arrays (DAAs) under correlated and uncorrelated channel fading. In DAA massive MIMO, the base station (BS) consists of multiple antenna sub-arrays. Notably, the antenna sub-arrays are deployed in arbitrary locations within a DAA massive MIMO cell. Consequently, the distance-dependent large-scale propagation coefficients are different from a user to these different antenna sub-arrays, which makes power control a challenging problem. We assume that the network operates in time-division duplex mode, where each BS obtains the channel estimates via uplink pilots. Based on the channel estimates, the BSs perform maximum-ratio transmission in the downlink. We then derive a closed-form signal-to-interference-plus-noise ratio (SINR) expression, where the channels are subject to correlated fading. Based on the SINR expression, we propose a networkwide max-min power control algorithm to ensure that each user in the network receives a uniform quality of service. Numerical results demonstrate the performance advantages offered by DAA massive MIMO. For some specific scenarios, DAA massive MIMO can improve the average per-user throughput up to 55%. Furthermore, we demonstrate that channel fading covariance is an important factor in determining the performance of DAA massive MIMO.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surfaces: Three Myths and Two Critical Questions

The search for physical-layer technologies that can play a key role in beyond-5G systems has started. One option is reconfigurable intelligent surfaces (RIS), which can collect wireless signals from a transmitter and passively beamform them towards the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have witnessed how several myths and overstatements are spreading in the literature. In this article, we take a neutral look at the RIS technology. We first review the fundamentals and then explain specific features that can be easily misinterpreted. In particular, we debunk three myths: 1) Current network technology can only control the transmitter and receiver, not the environment in between; 2) A better asymptotic array gain is achieved than with conventional beamforming; 3) The pathloss is the same as with anomalous mirrors. To inspire further research, we conclude by identifying two critical questions that must be answered for RIS to become a successful technology: 1) What is a convincing use case for RIS?; 2) How can we estimate channels and control an RIS in real time?

cs.IT↗

arXiv2020

Massively Distributed Antenna Systems with Non-Ideal Optical Fiber Front-hauls: A Promising Technology for 6G Wireless Communication Systems

Employing massively distributed antennas brings radio access points (RAPs) closer to users, thus enables aggressive spectrum reuse that can bridge gaps between the scarce spectrum resource and extremely high connection densities in future wireless systems. Examples include cloud radio access network (C-RAN), ultra-dense network (UDN), and cell-free massive multiple-input multiple-output (MIMO) systems. These systems are usually designed in the form of fiber-wireless communications (FWC), where distributed antennas or RAPs are connected to a central unit (CU) through optical front-hauls. A large number of densely deployed antennas or RAPs requires an extensive infrastructure of optical front-hauls. Consequently, the cost, complexity, and power consumption of the network of optical front-hauls may dominate the performance of the entire system. This article provides an overview and outlook on the architecture, modeling, design, and performance of massively distributed antenna systems with non-ideal optical front-hauls. Complex interactions between optical front-hauls and wireless access links require optimum designs across the optical and wireless domains by jointly exploiting their unique characteristics. It is demonstrated that systems with analog radio-frequency-over-fiber (RFoF) links outperform their baseband-over-fiber (BBoF) or intermediate-frequency-over-fiber (IFoF) counterparts for systems with shorter fiber length and more RAPs, which are all desired properties for future wireless communication systems.

eess.SP↗

arXiv2020

Massive Access for 5G and Beyond

Massive access, also known as massive connectivity or massive machine-type communication (mMTC), is one of the main use cases of the fifth-generation (5G) and beyond 5G (B5G) wireless networks. A typical application of massive access is the cellular Internet of Things (IoT). Different from conventional human-type communication, massive access aims at realizing efficient and reliable communications for a massive number of IoT devices. Hence, the main characteristics of massive access include low power, massive connectivity, and broad coverage, which require new concepts, theories, and paradigms for the design of next-generation cellular networks. This paper presents a comprehensive survey of aspects of massive access design for B5G wireless networks. Specifically, we provide a detailed review of massive access from the perspectives of theory, protocols, techniques, coverage, energy, and security. Furthermore, several future research directions and challenges are identified.

cs.IT↗

arXiv2020

Symbiotic Radio: Cognitive Backscattering Communications for Future Wireless Networks

The heterogenous wireless services and exponentially growing traffic call for novel spectrum- and energy-efficient wireless communication technologies. In this paper, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications(AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitter (PTx) based on cognitive backscattering communications, thus the secondary system shares not only the radio spectrum, but also the power, and infrastructure with the primary system. In return, the secondary transmission provides beneficial multipath diversity to the primary system, therefore the two systems form mutualism spectrum sharing. More importantly, joint decoding is exploited at SRx to achieve highly reliable backscattering communications. To exploit the full potential of SR, in this paper, we address three fundamental tasks in SR: (1) enhancing the backscattering link via active load; (2) achieving highly reliable communications through joint decoding; and (3) capturing PTx's RF signals using reconfigurable intelligent surfaces. Emerging applications, design challenges and open research problems will also be discussed.

eess.SP↗

arXiv2020

Joint Power Allocation and Load Balancing Optimization for Energy-Efficient Cell-Free Massive MIMO Networks

Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more uniform service level to the users than a conventional cellular topology. For a given user set, only a subset of the APs is likely needed to satisfy the users' performance demands, particularly outside the peak traffic hours. To find achieve an energy-efficient load balancing, we minimize the total downlink power consumption at the APs, considering both the transmit powers and hardware dissipation. APs can be temporarily turned off to reduce the latter part. The formulated optimization problem is non-convex but, nevertheless, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. Since the computational complexity is prohibitive for real-time implementation, we also propose two low-complexity algorithms that exploit the inherent group-sparsity and the optimized transmit powers in the problem formulation. Numerical results manifest that our optimization algorithms can greatly reduce the power consumption compared to keeping all APs turned on and only minimizing the transmit powers. Moreover, the low-complexity algorithms can effectively handle the power allocation and AP activation for large-scale networks.

cs.IT↗

arXiv2020

Max-Min Optimal Beamforming for Cell-Free Massive MIMO

This letter develops an optimum beamforming method for downlink transmissions in cell-free massive multiple-input multiple-output (MIMO) systems, which employ a massive number of distributed access points to provide concurrent services to multiple users. The optimum design is formulated as a max-min problem that maximizes the minimum signal-to-interference-plus-noise ratio of all users. It is shown analytically that the problem is quasi-concave, and the optimum solution is obtained with the second-order cone programming. The proposed method identifies the best achievable beamforming performance in cell-free massive MIMO systems. The results can be used as benchmarks for the design of practical low complexity beamformers.

eess.SP↗

arXiv2020

Power Control in Cellular Massive MIMO with Varying User Activity: A Deep Learning Solution

This paper considers the sum spectral efficiency (SE) optimization problem in multi-cell Massive MIMO systems with a varying number of active users. This is formulated as a joint pilot and data power control problem. Since the problem is non-convex, we first derive a novel iterative algorithm that obtains a stationary point in polynomial time. To enable real-time implementation, we also develop a deep learning solution. The proposed neural network, PowerNet, only uses the large-scale fading information to predict both the pilot and data powers. The main novelty is that we exploit the problem structure to design a single neural network that can handle a dynamically varying number of active users; hence, PowerNet is simultaneously approximating many different power control functions with varying number inputs and outputs. This is not the case in prior works and thus makes PowerNet an important step towards a practically useful solution. Numerical results demonstrate that PowerNet only loses $2\%$ in sum SE, compared to the iterative algorithm, in a nine-cell system with up to $90$ active users per in each coherence interval, and the runtime was only $0.03$ ms on a graphics processing unit (GPU). When good data labels are selected for the training phase, PowerNet can yield better sum SE than by solving the optimization problem with one initial point.

cs.IT↗

arXiv2020

Self-Learning Detector for the Cell-Free Massive MIMO Uplink: The Line-of-Sight Case

The precoding in cell-free massive multiple-input multiple-output (MIMO) technology relies on accurate knowledge of channel responses between users (UEs) and access points (APs). Obtaining high-quality channel estimates in turn requires the path losses between pairs of UEs and APs to be known. These path losses may change rapidly especially in line-of-sight environments with moving blocking objects. A difficulty in the estimation of path losses is pilot contamination, that is, simultaneously transmitted pilots from different UEs that may add up destructively or constructively by chance, seriously affecting the estimation quality (and hence the eventual performance). A method for estimation of path losses, along with an accompanying pilot transmission scheme, is proposed that works for both Rayleigh fading and line-of-sight channels and that significantly improves performance over baseline state-of-the-art. The salient feature of the pilot transmission scheme is that pilots are structurally phase-rotated over different coherence blocks (according to a pre-determined function known to all parties), in order to create an effective statistical distribution of the received pilot signal that can be efficiently exploited by the proposed estimation algorithm.

cs.IT↗

arXiv2020

Local Partial Zero-Forcing Precoding for Cell-Free Massive MIMO

Cell-free Massive MIMO (multiple-input multiple-output) is a promising distributed network architecture for 5G-and-beyond systems. It guarantees ubiquitous coverage at high spectral efficiency (SE) by leveraging signal co-processing at multiple access points (APs), aggressive spatial user multiplexing and extraordinary macro-diversity gain. In this study, we propose two distributed precoding schemes, referred to as \textit{local partial zero-forcing} (PZF) and \textit{local protective partial zero-forcing} (PPZF), that further improve the spectral efficiency by providing an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-hauling overhead, and implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. PZF and PPZF can substantially outperform maximum ratio transmission and zero-forcing, and their performance is comparable to that achieved by regularized zero-forcing (RZF), which is a benchmark in the downlink. Importantly, these closed-form expressions can be employed to devise optimal (long-term) power control strategies that are also suitable for RZF, whose closed-form expression for the SE is not available.

cs.IT↗

arXiv2020

Cell-Free Massive MIMO With Radio Stripes and Sequential Uplink Processing

Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture. We propose a novel sequential processing algorithm with normalized linear minimum mean square error (N-LMMSE) combining at every. This algorithm enables interference suppression in cell-free MMO while keeping the cost and front-haul requirements low. The spectral efficiency of the proposed algorithm is computed and analyzed. We conclude that it provides an attractive trade-off between low front-haul requirements and high spectral efficiency.

cs.IT↗

arXiv2020

Performance Analysis of Quantized Uplink Massive MIMO-OFDM With Oversampling Under Adjacent Channel Interference

Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resolution ADCs under frequency selective fading with orthogonal frequency division multiplexing in the perfect and imperfect receiver channel state information cases. We derive analytical expressions for the bit error rate and ergodic capacity. We show that the interfering band can be suppressed by increasing the number of antennas or the oversampling rate when a zero-forcing receiver is employed.

cs.IT↗

arXiv2020

Using Intelligent Reflecting Surfaces for Rank Improvement in MIMO Communications

An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only large at high SNR, and high SNR channels are mainly appearing in line-of-sight (LoS) scenarios where the channel matrix has low rank and therefore does not support spatial multiplexing. We demonstrate how an IRS can be used and optimized in such scenarios to increase the rank of the channel matrix, leading to substantial capacity gains.

eess.SP↗

arXiv2020

RadioWeaves for efficient connectivity: analysis andimpact of constraints in actual deployments

We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the environment. Technologically, RadioWeaves will deploy distributed arrays to create both favorable propagation and antenna array interaction. The technology leverages on the ideas of large-scale intelligent surfaces and cell-free wireless access. Offering close to the service connectivity and computing, new grades in energy efficiency,reliability, and low latency can be reached. The new concept moreover can be scaled up easily to offer a very high capacity inspecific areas demanding so. In this paper we anticipate how two different demanding use cases can be served well by a dedicated RadioWeaves deployment: a crowd scenario and a highly reflective factory environment. A practical approach towards a RadioWeaves prototype, integrating dispersed electronics invisibly in a room environment, is introduced. We outline diverse R\&D challenges that need to be addressed to realize the great potential of the RadioWeaves technology.

eess.SP↗

arXiv2020

Artificial Intelligence Enabled Wireless Networking for 5G and Beyond: Recent Advances and Future Challenges

The fifth generation (5G) wireless communication networks are currently being deployed, and beyond 5G (B5G) networks are expected to be developed over the next decade. Artificial intelligence (AI) technologies and, in particular, machine learning (ML) have the potential to efficiently solve the unstructured and seemingly intractable problems by involving large amounts of data that need to be dealt with in B5G. This article studies how AI and ML can be leveraged for the design and operation of B5G networks. We first provide a comprehensive survey of recent advances and future challenges that result from bringing AI/ML technologies into B5G wireless networks. Our survey touches different aspects of wireless network design and optimization, including channel measurements, modeling, and estimation, physical-layer research, and network management and optimization. Then, ML algorithms and applications to B5G networks are reviewed, followed by an overview of standard developments of applying AI/ML algorithms to B5G networks. We conclude this study by the future challenges on applying AI/ML to B5G networks.

cs.NI↗

arXiv2019

Weighted Sum-Rate Maximization for Reconfigurable Intelligent Surface Aided Wireless Networks

Reconfigurable intelligent surfaces (RIS) is a promising solution to build a programmable wireless environment via steering the incident signal in fully customizable ways with reconfigurable passive elements. In this paper, we consider a RIS-aided multiuser multiple-input single-output (MISO) downlink communication system. Our objective is to maximize the weighted sum-rate (WSR) of all users by joint designing the beamforming at the access point (AP) and the phase vector of the RIS elements, while both the perfect channel state information (CSI) setup and the imperfect CSI setup are investigated. For perfect CSI setup, a low-complexity algorithm is proposed to obtain the stationary solution for the joint design problem by utilizing the fractional programming technique. Then, we resort to the stochastic successive convex approximation technique and extend the proposed algorithm to the scenario wherein the CSI is imperfect. The validity of the proposed methods is confirmed by numerical results. In particular, the proposed algorithm performs quite well when the channel uncertainty is smaller than 10%.

eess.SP↗