arXiv subjects

Erik Schnetter

Publications and source records attributed to Erik Schnetter.

At least 19 recordsLinked to original sources

arXiv2026

Overview of the Canadian Hydrogen Observatory and Radio Transient Detector (CHORD) Project

The Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) is a next-generation wideband radio interferometer currently being constructed and commissioned at the Dominion Radio Astrophysical Observatory in British Columbia, Canada. CHORD is designed for precision 21\,cm cosmology, fast radio transient discovery, spectral line galaxy surveys, and pulsar science using a highly redundant large-N, small-diameter drift-scan array architecture. The telescope consists of a 512-element core array of 6\,m dishes operating from 300--1500\,MHz in drift-scan mode, together with two 64-dish outrigger stations located at the Hat Creek Radio Observatory and the Green Bank Observatory for long-baseline transient localization. The instrument supports multiple simultaneous digital backends for interferometric correlation, FRB detection, pulsar beamforming, and high spectral resolution surveys. CHORD is designed with an emphasis on precision beam control and stable instrumental response, incorporating lessons learned from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) while providing a substantial increase in sensitivity. Initial performance has been evaluated using a three-dish engineering array, and a 64-dish pathfinder array is currently being commissioned. The full array will be commissioned in 2028.

astro-ph.IM↗

arXiv2026

Wave Optics Effects from Gravitational Wave Propagation Through Dark Matter Halos

Gravitational wave (GW) propagation is usually studied under the geometric optics approximation. But when GWs propagate through structures of sizes similar to their wavelength, this approximation breaks down. Going beyond the geometric optics approximation allows us to explore the wave optics effects in curved background that appear in such cases. In this work, we present a scheme for numerically evolving linearised plane GWs through stationary, spherical astrophysical structures in both weak and strong gravity regimes. Our simulations evolve the full Einstein equations (with all 10 components) for Gaussian, NFW and Burkert potentials, although in simplified form for the two latter. Our simulations show that the scattering of the GWs depends not only on the mass of the lens but also strongly on the gravitational potential distribution of the lens. We isolate the effects of diffraction by setting the wavelength of GW to be less than the Schwarzschild radius of the structure. Among our most important results, we find that the GWs do not propagate along null geodesics when propagating through the Gaussian density, neither in the strong nor weak gravity setting. We also find that for the Burkert potential, the convexity of the plane wave is flipped when leaving the structure, in the strong gravity case. We compare our results with the linearized scalar wave predictions and find that the difference between these and the exact GW modes are of order one when the wave is inside the central potential. However, the difference reduces to only a few percent when the wave has passed through the structure. Although these effects are small, future GW detectors and Pulsar Timing Arrays (PTAs) could be sensitive to these signals which could thus potentially help in constraining the structure of dark matter spikes or halos.

gr-qc↗

arXiv2026

Numerical self-force calculations for scalar particles, formulated in the lab frame

We derive equations of motion for scalar particles self-consistently interacting with a scalar field,including the radiation produced by the particles' acceleration. Our approach differs in three key aspects from current methods: (1) we assume a small but finite discretization length scale $h$, which allows us to treat the particle as a small but finite object, (2) we choose the state vector for the system before deriving equations of motion, and (3) we formulate the equations explicitly in the lab frame and not in a manifestly covariant manner. This approach, which is self-consistent, happens to greatly simplify the resulting equations and their derivation, and is directly suitable for numerical calculations. The result is an effective source method which generalizes to electrodynamics or general relativity in a straightforward manner (although we do not consider this here). We then provide two possible discretizations of these equations, based on finite volumes and spectral methods, and show results of one-dimensional calculations. These calculations show excellent agreement with analytic solutions.

gr-qc↗

arXiv2026

High-Order Summation-By-Parts Schemes for First-Order Hyperbolic Systems in Curvilinear Coordinates with Singularities

Formulating stable numerical methods for hyperbolic systems in curvilinear coordinate with singularities, e.g. spherical coordinates, is complicated by the presence of these singularities. We present a method for constructing high-order accurate, energy-stable finite difference operators satisfying the Summation-by-Parts (SBP) property on spherical domains, extending ideas presented by [C. Gundlach, J. M. Martín-García, and D. Garfinkle, CQG 30, 145003 (2013)]. We define discrete gradient and divergence operators that mirror the continuous integration-by-parts principle, even though there is a $1/r^p$ coordinate singularity present at the origin. We explicitly construct such operators up to order six. Our operators place a grid point directly on the origin. We also review how to construct stable SBP operators that straddle the origin. We analyze the accuracy and spectral radii of these operators, and we show example evolutions of the scalar wave equation to demonstrate the advantages of such operators.

gr-qc↗

arXiv2026

Accelerating Numerical Relativity Simulations with New Multistep Fourth-Order Runge-Kutta Methods

Many HPC applications that solve differential equations rely on the Runge-Kutta family of methods for time integration. Among these methods, the fourth-order accurate RK4 scheme is especially popular. This time integration scheme requires applications to evaluate four intermediate stages to take one time step. Depending on the complexity of the problem being solved, the evaluation of these intermediate stages can be computationally expensive. In this paper we develop explicit fourth-order accurate Multistep Runge-Kutta (MSRK) methods. The advantage of such methods is that they re-use data from previous time steps, thus requiring fewer intermediate stage evaluations and potentially speeding up applications. We outline a procedure to obtain and tune the method's coefficients by adjusting their stability regions in an attempt to maximize the size that a time step can take. We validate and evaluate our new methods in the context of Numerical Relativity applications using the EinsteinToolkit. We believe, however, that these methods and results should generalize to other applications using explicit Runge-Kutta methods.

gr-qc↗

arXiv2025

A resistive MHD module in the GPU-accelerated GRMHD code GRaM-X

Relativistic macroscopic plasma dynamics can be described by general-relativistic magnetohydrodynamics. In many high-energy astrophysical settings, such as the interior dynamics of magnetized stars, the ideal GRMHD approximation, in which we assume infinite conductivity, provides an excellent description. However, ideal GRMHD neglects resistive effects that are essential for processes such as magnetic reconnection, dissipation, and magnetospheric dynamics. Incorporating resistivity into astrophysical plasma models accounts for the fact that plasmas in such environments are not perfect conductors. We present a resistive version of the GPU-accelerated GRMHD code GRaM-X, which evolves the full resistive GRMHD equations using the Z4c formalism for Einstein's equations. We implement a second-order implicit-explicit Runge-Kutta scheme to handle stiff source terms, obtain the primitive quantities from the conserved quantities using a one-dimensional recovery method, and employ the HLLE Riemann solver in combination with TVD and WENO reconstruction schemes. We validate the module using a range of standard tests, including 1D shocktubes, current sheets, Alfvén waves, 2D cylindrical explosions, and 3D TOV stars. The results of these tests demonstrate accurate recovery of the ideal MHD limit, correct resistive behavior, and stable evolution in dynamical spacetimes. Leveraging the GPU-accelerated resistive version of GRaM-X enables efficient large-scale simulations, paving the way for realistic studies of binary mergers, accretion flows, and relativistic jets within the framework of multi-messenger astrophysics.

astro-ph.HE↗

arXiv2025

Gravitational waves from magnetorotational core-collapse supernovae using 3D GRMHD simulations: effect of rotation and magnetic fields

We investigate the gravitational wave emission for 10 supernova progenitors from magnetorotational core-collapse to the supernova explosion using fully three-dimensional dynamical-spacetime general-relativistic magnetohydrodynamics simulations with the GPU-accelerated code $\texttt{GRaM-X}$. We consider 2 progenitors of zero-age-main-sequence mass $25M_\odot$ and 8 with zero-age-main-sequence masses of $35M_\odot$. For these models, we explore a range of rotation rates between $0.0$ and $3.5 \mathrm{rad}\, \mathrm{s}^{-1}$, along with initial seed magnetic field of either $10^{12}\mathrm{G}$ or $10^{13}\mathrm{G}$. The analysis of the 10 models presented provides a comprehensive and systematic initial investigation of the interplay between progenitor rotation, magnetic field strength, and progenitor structure in shaping the explosion dynamics and gravitational wave (GW) emission. We find that stronger seed magnetic fields ($10^{13}\mathrm{G}$) suppress the GW strain amplitude relative to models with weaker initial fields ($10^{12}\mathrm{G}$). Increasing the initial rotation rate results in a more dynamical explosion, yielding correspondingly stronger gravitational waves. In addition, the progenitor mass/composition also exhibit a significant impact on the explosion dynamics and the morphology of the resulting waveforms. Finally, we find that all of our models lie above the detectability threshold for 3rd generation detectors aLIGO, Einstein Telescope, and Cosmic explorer at a $10\mathrm{kpc}$ distance and most would even still be detectable at $10\mathrm{Mpc}$, opening the possibility for observing gravitational wave emission for CCSNe beyond our galaxy.

astro-ph.HE↗

arXiv2025

A Black Hole is Born: 3D GRMHD Simulation of Black Hole Formation from Core-Collapse

We present the first three-dimensional, fully general-relativistic magnetohydrodynamic (3D GRMHD) simulation of a black hole (BH) formed from the collapsed core of a massive star. The ability to self-consistently capture the birth of a compact remnant in 3D is crucial for modeling natal BH properties (including masses, spins, and kicks), which are of particular interest in the era of gravitational wave astronomy. However, such simulations have remained elusive due to extreme computational challenges and demands. We employ the GPU-accelerated dynamical-spacetime GRMHD code GRaM-X to follow the collapse, core-bounce, shock propagation, and eventual BH formation of a massive stellar progenitor in full 3D. We initialize our simulation by mapping a one-dimensional (1D) model of a star with a zero-age-main-sequence mass of $45 M_\odot$ to 3D. We use moderate rotation (consistent with expectations from stellar evolution modeling) and a relatively weak dipolar magnetic field. The collapsing core drives a shock that reaches a maximum radius of roughly 170 km before stalling and does not lead to a successful explosion. The proto-neutron star accretes matter before collapsing to form a BH $t_{BH} \approx 325$ ms after core-bounce. The time of BH formation and initial BH mass are remarkably similar to those obtained with GR1D, a 1D general-relativistic neutrino-hydrodynamics code, to which we compare our results. We track the horizon of the newborn BH after formation and calculate a steady kick velocity of $v_{kick} \approx 72$ km/s and a mass of $M_{BH} \approx 2.62 M_\odot$, which is still rising at the end of the simulation.

astro-ph.HE↗

arXiv2025

Localizing quantum fields with time-dependent potentials

In this paper we study the effect of localizing quantum field degrees of freedom by dynamically growing cavity walls through a time-dependent potential. We use our results to show that it is possible to do this without introducing non-negligible mixedness in localized modes of the field. We discuss how this addresses the concerns, raised in previous literature, that the high degree of entanglement of regular states in QFT may hinder relativistic quantum information protocols that make use of localized relativistic probes.

quant-ph↗

arXiv2025

GPU-accelerated Subcycling Time Integration with the Einstein Toolkit

Adaptive Mesh Refinement (AMR) with subcycling in time enables different grid levels to advance using their own time steps, ensuring finer grids employ smaller steps for accuracy while coarser grids take larger steps to improve computational efficiency. We present the development, validation, and performance analysis of a subcycling in time algorithm implemented within the CarpetX driver in the Einstein Toolkit framework. This new approach significantly improves upon the previous subcycling implementation in the Carpet driver by achieving higher-order convergence -- fourth order in time instead of second order -- and enhanced scaling performance. The key innovation lies in optimizing the exchange of ghost points at refinement boundaries, limiting it to the same number as those at inter-process boundaries using dense output from coarser levels, thereby reducing computational and communication overhead compared to the implementation in Carpet, which required a larger number of buffer zones. To validate the algorithm, we first demonstrate its fourth-order convergence using a scalar wave test. We then apply the algorithm to binary black hole (BBH) simulations, confirming its robustness and accuracy in a realistic astrophysical scenario. The results show excellent agreement with the well-established LazEv code. Scaling tests on CPU (Frontera) and GPU (Vista) clusters reveal significant performance gains, with the new implementation achieving improved speed and scalability compared to the Carpet-based version.

astro-ph.IM↗

arXiv2025

3D full-GR simulations of magnetorotational core-collapse supernovae on GPUs: A systematic study of rotation rates and magnetic fields

We present a series of fully three-dimensional, dynamical-spacetime general relativistic magnetohydrodynamics (GRMHD) simulations of core-collapse supernovae (CCSNe) for a progenitor of zero-age-main-sequence (ZAMS) mass $25\, M_\odot$. We simulate a total of 12 models for simulation times in the range $190-260\, \mathrm{ms}$ to systematically study the effect of rotation rates and magnetic fields on jet formation via the magnetorotational mechanism. We have performed simulations on OLCF's Frontier using the new GPU-accelerated dynamical-spacetime GRMHD code \theCode for magnetic fields $B_0 = (10^{11}, 10^{12})\, \mathrm{G}$ and rotation rates $Ω_0 = (0.14, 0.5, 1.0, 1.5, 2.0, 2.5)\, \mathrm{rad/s}$. We always resolve the entire region containing the shock with a resolution of at least $1.48\, \mathrm{km}$. We find that models with $B_0=10^{11}\, \mathrm{G}$ fail to explode, while those with $B_0=10^{12}\, \mathrm{G}$ show a wide range of jet morphologies and explosive outcomes depending on the rotation rate. Models with $B_0=10^{12}\, \mathrm{G}$ and $Ω_0=(1.0,1.5)\, \mathrm{rad/s}$ form jets that bend sideways, giving the ejecta a more spherical character, and possibly representing explosions that \textit{appear} neutrino-driven even though they are magnetorotationally-driven. Models with $B_0=10^{12}\, \mathrm{G}$ and $Ω_0\geq2.0\, \mathrm{rad/s}$ show ejecta velocities $\gtrsim15000\, \mathrm{km/s}$, making them suitable candidates for broad-lined type Ic supernova progenitors. This work represents the largest set of 3D general-relativistic GRMHD simulations studying magnetorotational supernovae in full GR and demonstrates the potential of systematic studies with GPU-accelerated 3D simulations of CCSNe.

astro-ph.HE↗

arXiv2025

Numerical evolution of Maxwell's equations for wavefronts propagating through a spherical gravitational potential

We present a scheme for numerically solving Maxwell's equations in a weakly perturbed spacetime without introducing the usual geometric optics approximation. Using this scheme, we study light propagation through a spherical perturbation of a stationary metric in the linear limit. Going beyond geometric approximation allows us to explore the wave optics effects that occur when the wavefront propagates through the gravitational potential. We find that the wavefront breaks on the gravitational potential due to the Shapiro time delay, i.e. due to the slowing down of light when propagating in an inhomogeneous spacetime. This again leads to constructive interference, resulting in a persistent frequency dependent amplification of parts of the wave amplitude. When the wave length is shorter than a certain threshold set by the induced gravitational mass, the waves are reflected on the curvature gradient.

gr-qc↗

arXiv2025

AsterX: a new open-source GPU-accelerated GRMHD code for dynamical spacetimes

We present AsterX, a novel open-source, modular, GPU-accelerated, fully general relativistic magnetohydrodynamic (GRMHD) code designed for dynamic spacetimes in 3D Cartesian coordinates, and tailored for exascale computing. We utilize block-structured adaptive mesh refinement (AMR) through CarpetX, the new driver for the Einstein Toolkit, which is built on AMReX, a software framework for massively parallel applications. AsterX employs the Valencia formulation for GRMHD, coupled with the Z4c formalism for spacetime evolution, while incorporating high resolution shock capturing schemes to accurately handle the hydrodynamics. AsterX has undergone rigorous testing in both static and dynamic spacetime, demonstrating remarkable accuracy and agreement with other codes in literature. Using subcycling in time, we find an overall performance gain of factor 2.5 to 4.5. Benchmarking the code through scaling tests on OLCF's Frontier supercomputer, we demonstrate a weak scaling efficiency of about 67%-77% on 4096 nodes compared to an 8-node performance.

astro-ph.HE↗

arXiv2025

Formulating the complete initial boundary value problem in numerical relativity to model black hole echoes

In an attempt to simulate black hole echoes (generated by potential quantum-gravitational structure) in numerical relativity, we recently described how to implement a reflecting boundary outside of the horizon of a black hole in spherical symmetry. Here, we generalize this approach to spacetimes with no symmetries and implement it numerically using the generalized harmonic formulation. We cast the evolution equations and the numerical implementation into a Summation By Parts (SBP) scheme, which seats our method closer to a class of provably numerically stable systems. We implement an embedded boundary numerical framework that allows for arbitrarily shaped domains on a rectangular grid and even boundaries that evolve and move across the grid. As a demonstration of this framework, we study the evolution of gravitational wave scattering off a boundary either inside, or just outside, the horizon of a black hole. This marks a big leap toward the goal of a generic framework to obtain gravitational waveforms for behaviors motivated by quantum gravity near the horizons of merging black holes.

gr-qc↗

arXiv2024

Nonlinear ringdown at the black hole horizon

The gravitational waves emitted by a perturbed black hole ringing down are well described by damped sinusoids, whose frequencies are those of quasinormal modes. Typically, first-order black hole perturbation theory is used to calculate these frequencies. Recently, it was shown that second-order effects are necessary in binary black hole merger simulations to model the gravitational-wave signal observed by a distant observer. Here, we show that the horizon of a newly formed black hole after the head-on collision of two black holes also shows evidence of non-linear modes. Specifically, we identify one quadratic mode for the $l=2$ shear data, and two quadratic ones for the $l=4,6$ data in simulations with varying mass ratio and boost parameter. The quadratic mode amplitudes display a quadratic relationship with the amplitudes of the linear modes that generate them.

gr-qc↗

arXiv2023

Reflecting boundary conditions in numerical relativity as a model for black hole echoes

Recently, there has been much interest in black hole echoes, based on the idea that there may be some mechanism (e.g., from quantum gravity) that waves/fields falling into a black hole could partially reflect off of an interface before reaching the horizon. There does not seem to be a good understanding of how to properly model a reflecting surface in numerical relativity, as the vast majority of the literature avoids the implementation of artificial boundaries, or applies transmitting boundary conditions. Here, we present a framework for reflecting a scalar field in a fully dynamical spherically symmetric spacetime, and implement it numerically. We study the evolution of a wave packet in this situation and its numerical convergence, including when the location of a reflecting boundary is very close to the horizon of a black hole. This opens the door to model exotic near-horizon physics within full numerical relativity.

gr-qc↗

arXiv2023

MPI Application Binary Interface Standardization

MPI is the most widely used interface for high-performance computing (HPC) workloads. Its success lies in its embrace of libraries and ability to evolve while maintaining backward compatibility for older codes, enabling them to run on new architectures for many years. In this paper, we propose a new level of MPI compatibility: a standard Application Binary Interface (ABI). We review the history of MPI implementation ABIs, identify the constraints from the MPI standard and ISO C, and summarize recent efforts to develop a standard ABI for MPI. We provide the current proposal from the MPI Forum's ABI working group, which has been prototyped both within MPICH and as an independent abstraction layer called Mukautuva. We also list several use cases that would benefit from the definition of an ABI while outlining the remaining constraints.

cs.DC↗

arXiv2023

Outflows from Short-Lived Neutron-Star Merger Remnants Can Produce a Blue Kilonova

We present a 3D general-relativistic magnetohydrodynamic simulation of a short-lived neutron star remnant formed in the aftermath of a binary neutron star merger. The simulation uses an M1 neutrino transport scheme to track neutrino-matter interactions and is well-suited to studying the resulting nucleosynthesis and kilonova emission. We find that the ejecta in our simulations under-produce $r$-process abundances beyond the second $r$-process peak. For sufficiently long-lived remnants, these outflows \textit{alone} can produce blue kilonovae, including the blue kilonova component observed for AT2017gfo.

astro-ph.HE↗