arXiv subjects

Erik Schnetter

Publications and source records attributed to Erik Schnetter.

At least 73 records · Page 4Linked to original sources

arXiv2011

The Einstein Toolkit: A Community Computational Infrastructure for Relativistic Astrophysics

We describe the Einstein Toolkit, a community-driven, freely accessible computational infrastructure intended for use in numerical relativity, relativistic astrophysics, and other applications. The Toolkit, developed by a collaboration involving researchers from multiple institutions around the world, combines a core set of components needed to simulate astrophysical objects such as black holes, compact objects, and collapsing stars, as well as a full suite of analysis tools. The Einstein Toolkit is currently based on the Cactus Framework for high-performance computing and the Carpet adaptive mesh refinement driver. It implements spacetime evolution via the BSSN evolution system and general-relativistic hydrodynamics in a finite-volume discretization. The toolkit is under continuous development and contains many new code components that have been publicly released for the first time and are described in this article. We discuss the motivation behind the release of the toolkit, the philosophy underlying its development, and the goals of the project. A summary of the implemented numerical techniques is included, as are results of numerical test covering a variety of sample astrophysical problems.

gr-qc↗

arXiv2011

Extreme black hole simulations: collisions of unequal mass black holes and the point particle limit

Numerical relativity has seen incredible progress in the last years, and is being applied with success to a variety of physical phenomena, from gravitational-wave research and relativistic astrophysics to cosmology and high-energy physics. Here we probe the limits of current numerical setups, by studying collisions of unequal mass, non-rotating black holes of mass-ratios up to 1:100 and making contact with a classical calculation in General Relativity: the infall of a point-like particle into a massive black hole. Our results agree well with the predictions coming from linearized calculations of the infall of point-like particles into non-rotating black holes. In particular, in the limit that one hole is much smaller than the other, and the infall starts from an infinite initial separation, we recover the point-particle limit. Thus, numerical relativity is able to bridge the gap between fully non-linear dynamics and linearized approximations, which may have important applications. Finally, we also comment on the "spurious" radiation content in the initial data and the linearized predictions.

gr-qc↗

arXiv2011

Gravitational Wave Extraction in Simulations of Rotating Stellar Core Collapse

We perform simulations of general relativistic rotating stellar core collapse and compute the gravitational waves (GWs) emitted in the core bounce phase of three representative models via multiple techniques. The simplest technique, the quadrupole formula (QF), estimates the GW content in the spacetime from the mass quadrupole tensor. It is strictly valid only in the weak-field and slow-motion approximation. For the first time, we apply GW extraction methods in core collapse that are fully curvature-based and valid for strongly radiating and highly relativistic sources. We employ three extraction methods computing (i) the Newman-Penrose (NP) scalar Psi_4, (ii) Regge-Wheeler-Zerilli-Moncrief (RWZM) master functions, and (iii) Cauchy-Characteristic Extraction (CCE) allowing for the extraction of GWs at future null infinity, where the spacetime is asymptotically flat and the GW content is unambiguously defined. The latter technique is the only one not suffering from residual gauge and finite-radius effects. All curvature-based methods suffer from strong non-linear drifts. We employ the fixed-frequency integration technique as a high-pass waveform filter. Using the CCE results as a benchmark, we find that finite-radius NP extraction yields results that agree nearly perfectly in phase, but differ in amplitude by ~1-7% at core bounce, depending on the model. RWZM waveforms, while in general agreeing in phase, contain spurious high-frequency noise of comparable amplitudes to those of the relatively weak GWs emitted in core collapse. We also find remarkably good agreement of the waveforms obtained from the QF with those obtained from CCE. They agree very well in phase but systematically underpredict peak amplitudes by ~5-11% which is comparable to the NP results and is within the uncertainties associated with core collapse physics. (abridged)

gr-qc↗

arXiv2011

Ensuring Correctness at the Application Level: a Software Framework Approach

As scientific applications extend to the simulation of more and more complex systems, they involve an increasing number of abstraction levels, at each of which errors can emerge and across which they can propagate; tools for correctness evaluation and enforcement at every level (from the code level to the application level) are therefore necessary. Whilst code-level debugging tools are already a well established standard, application-level tools are lagging behind, possibly due to their stronger dependence on the application's details. In this paper, we describe the programming model introduced by the Cactus framework, review the High Performance Computing (HPC) challenges that Cactus is designed to address, and illustrate the correctness strategies that are currently available in Cactus at the code, component, and application level.

cs.SE↗

arXiv2010

Stability of general-relativistic accretion disks

Self-gravitating relativistic disks around black holes can form as transient structures in a number of astrophysical scenarios such as binary neutron star and black hole-neutron star coalescences, as well as the core-collapse of massive stars. We explore the stability of such disks against runaway and non-axisymmetric instabilities using three-dimensional hydrodynamics simulations in full general relativity using the THOR code. We model the disk matter using the ideal fluid approximation with a $Γ$-law equation of state with $Γ=4/3$. We explore three disk models around non-rotating black holes with disk-to-black hole mass ratios of 0.24, 0.17 and 0.11. Due to metric blending in our initial data, all of our initial models contain an initial axisymmetric perturbation which induces radial disk oscillations. Despite these oscillations, our models do not develop the runaway instability during the first several orbital periods. Instead, all of the models develop unstable non-axisymmetric modes on a dynamical timescale. We observe two distinct types of instabilities: the Papaloizou-Pringle and the so-called intermediate type instabilities. The development of the non-axisymmetric mode with azimuthal number m = 1 is accompanied by an outspiraling motion of the black hole, which significantly amplifies the growth rate of the m = 1 mode in some cases. Overall, our simulations show that the properties of the unstable non-axisymmetric modes in our disk models are qualitatively similar to those in Newtonian theory.

astro-ph.HE↗

arXiv2010

Component Specification in the Cactus Framework: The Cactus Configuration Language

Component frameworks are complex systems that rely on many layers of abstraction to function properly. One essential requirement is a consistent means of describing each individual component and how it relates to both other components and the whole framework. As component frameworks are designed to be flexible by nature, the description method should be simultaneously powerful, lead to efficient code, and be easy to use, so that new users can quickly adapt their own code to work with the framework. In this paper, we discuss the Cactus Configuration Language (CCL) which is used to describe components ("thorns'') in the Cactus Framework. The CCL provides a description language for the variables, parameters, functions, scheduling and compilation of a component and includes concepts such as interface and implementation which allow thorns providing the same capabilities to be easily interchanged. We include several application examples which illustrate how community toolkits use the CCL and Cactus and identify needed additions to the language.

cs.DC↗

arXiv2010

Simplifying Complex Software Assembly: The Component Retrieval Language and Implementation

Assembling simulation software along with the associated tools and utilities is a challenging endeavor, particularly when the components are distributed across multiple source code versioning systems. It is problematic for researchers compiling and running the software across many different supercomputers, as well as for novices in a field who are often presented with a bewildering list of software to collect and install. In this paper, we describe a language (CRL) for specifying software components with the details needed to obtain them from source code repositories. The language supports public and private access. We describe a tool called GetComponents which implements CRL and can be used to assemble software. We demonstrate the tool for application scenarios with the Cactus Framework on the NSF TeraGrid resources. The tool itself is distributed with an open source license and freely available from our web page.

cs.PL↗

arXiv2010

Simulation Factory: Taming Application Configuration and Workflow on High-End Resources

Computational Science on large high performance computing resources is hampered by the complexity of these systems. Much of this complexity is due to low-level details on these resources that are exposed to the application and the end user. This includes (but is not limited to) mechanisms for remote access, configuring and building applications from source code, and managing simulations and their output files via batch queue systems. These challenges multiply in a modern research environment, where a research collaboration spans multiple groups, often in loosely defined international collaborations, where there is a constant influx of new students into multi-year projects, and where simulations are performed on several different resources. The Simulation Factory addresses these challenges by significantly simplifying remote access, building executables, and managing simulations. By abstracting out the low-level differences between different resources, it offers a uniform interface to these resources. At the same time, it can enforce certain standards for performing simulations that encapsulate best practices from experienced users. Furthermore, SimFactory's automation avoids many possible user errors that can in the worst case render month-long simulations worthless.

cs.DC↗

arXiv2010

The slicing dependence of non-spherically symmetric quasi-local horizons in Vaidya Spacetimes

It is well known that quasi-local black hole horizons depend on the choice of a time coordinate in a spacetime. This has implications for notions such as the surface of the black hole and also on quasi-local physical quantities such as horizon measures of mass and angular momentum. In this paper, we compare different horizons on non-spherically symmetric slicings of Vaidya spacetimes. The spacetimes we investigate include both accreting and evaporating black holes. For some simple choices of the Vaidya mass function function corresponding to collapse of a hollow shell, we compare the area for the numerically found axisymmetric trapping horizons with the area of the spherically symmetric trapping horizon and event horizon. We find that as expected, both the location and area are dependent on the choice of foliation. However, the area variation is not large, of order $0.035\%$ for a slowly evolving horizon with $\dot{m}=0.02$. We also calculate analytically the difference in area between the spherically symmetric quasi-local horizon and event horizon for a slowly accreting black hole. We find that the difference can be many orders of magnitude larger than the Planck area for sufficiently large black holes.

gr-qc↗

arXiv2010

Time Step Size Limitation Introduced by the BSSN Gamma Driver

Many mesh refinement simulations currently performed in numerical relativity counteract instabilities near the outer boundary of the simulation domain either by changes to the mesh refinement scheme or by changes to the gauge condition. We point out that the BSSN Gamma Driver gauge condition introduces a time step size limitation in a similar manner as a CFL condition, but which is independent of the spatial resolution. We give a didactic explanation of this issue, show why especially mesh refinement simulations suffer from it, and point to a simple remedy.

gr-qc↗

arXiv2010

On the frequency band of the f-mode CFS instability

Rapidly rotating neutron stars can be unstable to the gravitational-wave-driven CFS mechanism if they have a neutral point in the spectrum of nonaxisymmetric f-modes. We investigate the frequencies of these modes in two sequences of uniformly rotating polytropes using nonlinear simulations in full general relativity, determine the approximate locations of the neutral points, and derive limits on the observable frequency band available to the instability in these sequences. We find that general relativity enhances the detectability of a CFS-unstable neutron star substantially, both by widening the instability window and enlarging the band into the optimal range for interferometric detectors like LIGO, VIRGO, and GEO-600.

astro-ph.SR↗

arXiv2009

High accuracy binary black hole simulations with an extended wave zone

We present results from a new code for binary black hole evolutions using the moving-puncture approach, implementing finite differences in generalised coordinates, and allowing the spacetime to be covered with multiple communicating non-singular coordinate patches. Here we consider a regular Cartesian near zone, with adapted spherical grids covering the wave zone. The efficiencies resulting from the use of adapted coordinates allow us to maintain sufficient grid resolution to an artificial outer boundary location which is causally disconnected from the measurement. For the well-studied test-case of the inspiral of an equal-mass non-spinning binary (evolved for more than 8 orbits before merger), we determine the phase and amplitude to numerical accuracies better than 0.010% and 0.090% during inspiral, respectively, and 0.003% and 0.153% during merger. The waveforms, including the resolved higher harmonics, are convergent and can be consistently extrapolated to $r\to\infty$ throughout the simulation, including the merger and ringdown. Ringdown frequencies for these modes (to $(\ell,m)=(6,6)$) match perturbative calculations to within 0.01%, providing a strong confirmation that the remnant settles to a Kerr black hole with irreducible mass $M_{\rm irr} = 0.884355\pm20\times10^{-6}$ and spin $S_f/M_f^2 = 0.686923 \pm 10\times10^{-6}$

gr-qc↗

arXiv2009

The Asymptotic Falloff of Local Waveform Measurements in Numerical Relativity

We examine current numerical relativity computations of gravitational waves, which typically determine the asymptotic waves at infinity by extrapolation from finite (small) radii. Using simulations of a black hole binary with accurate wave extraction at $r=1000M$, we show that extrapolations from the near-zone are self-consistent in approximating measurements at this radius, although with a somewhat reduced accuracy. We verify that $ψ_4$ is the dominant asymptotic contribution to the gravitational energy (as required by the peeling theorem) but point out that gauge effects may complicate the interpretation of the other Weyl components.

gr-qc↗

arXiv2009

Testing gravitational-wave searches with numerical relativity waveforms: Results from the first Numerical INJection Analysis (NINJA) project

The Numerical INJection Analysis (NINJA) project is a collaborative effort between members of the numerical relativity and gravitational-wave data analysis communities. The purpose of NINJA is to study the sensitivity of existing gravitational-wave search algorithms using numerically generated waveforms and to foster closer collaboration between the numerical relativity and data analysis communities. We describe the results of the first NINJA analysis which focused on gravitational waveforms from binary black hole coalescence. Ten numerical relativity groups contributed numerical data which were used to generate a set of gravitational-wave signals. These signals were injected into a simulated data set, designed to mimic the response of the Initial LIGO and Virgo gravitational-wave detectors. Nine groups analysed this data using search and parameter-estimation pipelines. Matched filter algorithms, un-modelled-burst searches and Bayesian parameter-estimation and model-selection algorithms were applied to the data. We report the efficiency of these search methods in detecting the numerical waveforms and measuring their parameters. We describe preliminary comparisons between the different search methods and suggest improvements for future NINJA analyses.

gr-qc↗

arXiv2009

Status of NINJA: the Numerical INJection Analysis project

The 2008 NRDA conference introduced the Numerical INJection Analysis project (NINJA), a new collaborative effort between the numerical relativity community and the data analysis community. NINJA focuses on modeling and searching for gravitational wave signatures from the coalescence of binary system of compact objects. We review the scope of this collaboration and the components of the first NINJA project, where numerical relativity groups shared waveforms and data analysis teams applied various techniques to detect them when embedded in colored Gaussian noise.

gr-qc↗

arXiv2009

Turduckening black holes: an analytical and computational study

We provide a detailed analysis of several aspects of the turduckening technique for evolving black holes. At the analytical level we study the constraint propagation for a general family of BSSN-type formulation of Einstein's field equations and identify under what conditions the turducken procedure is rigorously justified and under what conditions constraint violations will propagate to the outside of the black holes. We present high-resolution spherically symmetric studies which verify our analytical predictions. Then we present three dimensional simulations of single distorted black holes using different variations of the turduckening method and also the puncture method. We study the effect that these different methods have on the coordinate conditions, constraint violations, and extracted gravitational waves. We find that the waves agree up to small but non-vanishing differences, caused by escaping superluminal gauge modes. These differences become smaller with increasing detector location.

gr-qc↗

arXiv2008

Spin Diagrams for Equal-Mass Black-Hole Binaries with Aligned Spins

Binary black-hole systems with spins aligned with the orbital angular momentum are of special interest as they may be the preferred end-state of the inspiral of generic supermassive binary black-hole systems. In view of this, we have computed the inspiral and merger of a large set of binary systems of equal-mass black holes with spins aligned with the orbital angular momentum but otherwise arbitrary. By least-square fitting the results of these simulations we have constructed two "spin diagrams" which provide straightforward information about the recoil velocity |v_kick| and the final black-hole spin a_fin in terms of the dimensionless spins a_1 and a_2 of the two initial black holes. Overall they suggest a maximum recoil velocity of |v_kick|=441.94 km/s, and minimum and maximum final spins a_fin=0.3471 and a_fin=0.9591, respectively.

gr-qc↗

arXiv2008

The final spin from the coalescence of aligned-spin black-hole binaries

Determining the final spin of a black-hole (BH) binary is a question of key importance in astrophysics. Modelling this quantity in general is made difficult by the fact that it depends on the 7-dimensional space of parameters characterizing the two initial black holes. However, in special cases, when symmetries can be exploited, the description can become simpler. For black-hole binaries with unequal masses but with equal spins which are aligned with the orbital angular momentum, we show that the use of recent simulations and basic but exact constraints derived from the extreme mass-ratio limit allow to model this quantity with a simple analytic expression. Despite the simple dependence, the expression models very accurately all of the available estimates, with errors of a couple of percent at most. We also discuss how to use the fit to predict when a Schwarzschild BH is produced by the merger of two spinning BHs, when the total angular momentum of the spacetime ``flips'' sign, or under what conditions the final BH is ``spun-up'' by the merger. Finally, suggest an extension of the fit to include unequal-spin binaries, thus potentially providing a complete description of the final spin from the coalescence of generic black-hole binaries with spins aligned to the orbital angular momentum.

gr-qc↗