arXiv subjects

Ertugrul Basar

Publications and source records attributed to Ertugrul Basar.

At least 91 records · Page 5Linked to original sources

arXiv2022

Channel Modeling in RIS-Empowered Wireless Communications

One of the most critical aspects of enabling next-generation wireless technologies is developing an accurate and consistent channel model to be validated effectively with the help of real-world measurements. From this point of view, remarkable research has recently been conducted to model propagation channels involving the modification of the wireless propagation environment through the inclusion of reconfigurable intelligent surfaces (RISs). This study mainly aims to present a vision on channel modeling strategies for the RIS-empowered communications systems considering the state-of-the-art channel and propagation modeling efforts in the literature. Moreover, it is also desired to draw attention to open-source and standard-compliant physical channel modeling efforts to provide comprehensive insights regarding the practical use-cases of RISs in future wireless networks.

eess.SP↗

arXiv2021

Reconfigurable Intelligent Surface Optimization for Uplink Sparse Code Multiple Access

The reconfigurable intelligent surface (RIS)-assisted sparse code multiple access (RIS-SCMA) is an attractive scheme for future wireless networks. In this letter, for the first time, the RIS phase shifts of the uplink RIS-SCMA system are optimized based on the alternate optimization (AO) technique to improve the received signal-to-noise ratio (SNR) for a discrete set of RIS phase shifts. The system model of the uplink RIS-SCMA is formulated to utilize the AO algorithm. For further reduction in the computational complexity, a low-complexity AO (LC-AO) algorithm is proposed. The complexity analysis of the two proposed algorithms is performed. Monte Carlo simulations and complexity analysis show that the proposed algorithms significantly improve the received SNR compared to the non-optimized RIS-SCMA scenario. The LC-AO provides the same received SNR as the AO algorithm, with a significant reduction in complexity. Moreover, the deployment of RISs for the uplink RIS-SCMA is investigated.

cs.IT↗

arXiv2021

SimMBM Channel Simulator for Media-Based Modulation Systems

Media-based modulation (MBM), exploiting rich scattering properties of transmission environments via different radiation patterns of a single reconfigurable antenna (RA), has brought new insights into future communication systems. In this study, considering this innovative transmission principle, we introduce the realistic, two-dimensional (2D), and open-source SimMBM channel simulator to support various applications of MBM systems at sub-6 GHz frequency bands in different environments.

cs.IT↗

arXiv2021

Physical Channel Modeling for RIS-Empowered Wireless Networks in Sub-6 GHz Bands

Reconfigurable intelligent surface (RIS)-assisted communications is one of the promising candidates for next generation wireless networks by controlling the propagation environment dynamically. In this study, a channel modeling strategy for RIS-assisted wireless networks is introduced in sub-6 GHz bands by considering both far-field and near-field behaviours in transmission. We also proposed an open-source physical channel simulator for sub-6 GHz bands where operating frequency, propagation environment, terminal locations, RIS location and size can be adjusted. It is demonstrated via extensive computer simulations that an improved achievable rate performance is obtained in the presence of RISs for both near-field and far-field conditions.

cs.IT↗

arXiv2021

Modeling and Measurements for Multi-path Mitigation with Reconfigurable Intelligent Surfaces

A reconfigurable intelligent surface (RIS) is capable of manipulating electromagnetic waves with its flexibly configurable unit cells, thus is an appealing technology to resist fast fading caused by multi-path in wireless communications. In this paper, a two-path propagation model for RIS-assisted wireless communications is proposed by considering both the direct path from the transmitter to the receiver and the assisted path provided by the RIS. The proposed propagation model unveils that the phase shifts of RISs can be optimized by appropriate configuration for multi-path fading mitigation. In particular, four types of RISs with different configuration capabilities are introduced and their performances on improving received signal power in virtue of the assisted path to resist fast fading are compared through extensive simulation results. In addition, an RIS operating at 35 GHz is used for experimental measurement. The experimental results verify that an RIS has the ability to combat fast fading and thus improves the receiving performance, which may lay a foundation for further researches.

cs.IT↗

arXiv2021

Present and Future of Reconfigurable Intelligent Surface-Empowered Communications

Signal processing and communication communities have witnessed the rise of many exciting communication technologies in recent years. Notable examples include alternative waveforms, massive multiple-input multiple-output (MIMO) signaling, non-orthogonal multiple access (NOMA), joint communications and sensing, sparse vector coding, index modulation, and so on. It is inevitable that 6G wireless networks will require a rethinking of wireless communication systems and technologies, particularly at the physical layer (PHY), considering the fact that the cellular industry reached another important milestone with the development of 5G wireless networks with diverse applications. Within this perspective, this article aims to shed light on the rising concept of reconfigurable intelligent surface (RIS)-empowered communications towards 6G wireless networks. Software-defined RISs can manipulate their impinging signals in an effective way to boost certain key performance indicators. We discuss the recent developments in the field and put forward promising candidates for future research and development. Specifically, we put our emphasis on active, transmitter-type, transmissive-reflective, and standalone RISs, by discussing their advantages and disadvantages compared to reflective RIS designs. Finally, we also envision an ultimate RIS architecture, which is able to adjust its operation modes dynamically, and introduce the new concept of PHY slicing over RISs towards 6G wireless networks.

eess.SP↗

arXiv2021

Design and Implementation of MIMO Transmission Based on Dual-Polarized Reconfigurable Intelligent Surface

Multiple-input multiple-output (MIMO) signaling is one of the key technologies of current mobile communication systems. However, the complex and expensive radio frequency (RF) chains have always limited the increase of MIMO scale. In this paper, we propose a MIMO transmission architecture based on a dual-polarized reconfigurable intelligent surface (RIS), which can directly achieve modulation and transmission of multichannel signals without the need for conventional RF chains. Compared with previous works, the proposed architecture can improve the integration of RIS-based transmission systems. A prototype of the dual-polarized RIS-based MIMO transmission system is built and the experimental results confirm the feasibility of the proposed architecture. The dual-polarized RIS-based MIMO transmission architecture provides a promising solution for realizing low-cost ultra-massive MIMO towards future networks.

cs.IT↗

arXiv2021

The Interplay of Reconfigurable Intelligent Surfaces and Mobile Edge Computing in Future Wireless Networks: A Win-Win Strategy to 6G

Reconfigurable intelligent surface (RIS)-empowered communication is being considered as an enabling technology for sixth generation (6G) wireless networks. The key idea of RIS-assisted communication is to enhance the capacity, coverage, energy efficiency, physical layer security, and many other aspects of modern wireless networks. At the same time, mobile edge computing (MEC) has already shown its huge potential by extending the computation, communication, and caching capabilities of a standalone cloud server to the network edge. In this article, we first provide an overview of how MEC and RIS can benefit each other. We envision that the integration of MEC and RIS will bring an unprecedented transformation to the future evolution of wireless networks. We provide a system-level perspective on the MEC-aided RIS (and RIS-assisted MEC) that will evolve wireless network towards 6G. We also outline some of the fundamental challenges that pertain to the implementation of MEC-aided RIS (and RIS-assisted MEC) networks. Finally, the key research trends in the RIS-assisted MEC are discussed.

cs.NI↗

arXiv2021

Index Modulation Based Coordinate Interleaved Orthogonal Design for Secure Communications

In this paper, we propose a physical layer security scheme that exploits a novel index modulation (IM) technique for coordinate interleaved orthogonal designs (CIOD). Utilizing the diversity gain of CIOD transmission, the proposed scheme, named CIOD-IM, provides an improved spectral efficiency by means of IM. In order to provide a satisfactory secrecy rate, we design a particular artificial noise matrix, which does not affect the performance of the legitimate receiver, while deteriorating the performance of the eavesdropper. We derive expressions of the ergodic secrecy rate and the theoretical bit error rate upper bound. In addition, we analyze the case of imperfect channel estimation by taking practical concerns into consideration. It is shown via computer simulations that the proposed scheme outperforms the existing IM-based schemes and might be a candidate for future secure communication systems.

cs.IT↗

arXiv2021

Joint Transmit and Receive Antenna Selection System for MIMO-NOMA with Energy Harvesting

In this paper, outage probability (OP) of a joint transmit and receive antenna selection (JTRAS) scheme is analyzed in multiple-input multiple-output non orthogonal multiple access based downlink energy harvesting (EH) relaying networks. In this dual-hop and amplify-and-forward relaying based network, since the first and second hops are types of single-user and multi-user systems, respectively, the optimal JTRAS and suboptimal majority-based JTRAS schemes are employed in the first and second hops. The theoretical OP analysis is carried out over Nakagami-m fading channels in the cases of perfect and imperfect successive interference cancellation. Finally, Monte Carlo simulations are performed to substantiate the accuracy of the theoretical analysis. It is shown that the optimal power splitting ratios at the EH relay are different for users and the users with good channel conditions have minimum optimal ratios.

eess.SP↗

arXiv2021

Pulse Index Modulation

Emerging systems such as Internet-of-things (IoT) and machine-to-machine (M2M) communications have strict requirements on the power consumption of used equipments and associated complexity in the transceiver design. As a result, multiple-input multiple-output (MIMO) solutions might not be directly suitable for these system due to their high complexity, inter-antenna synchronization (IAS) requirement, and high inter-antenna interference (IAI) problems. In order to overcome these problems, we propose two novel index modulation (IM) schemes, namely pulse index modulation (PIM) and generalized PIM (GPIM) for single-input single-output (SISO) schemes. The proposed models use well-localized and orthogonal Hermite-Gaussian pulses for data transmission and provide high spectral efficiency owing to the Hermite-Gaussian pulse indices. Besides, it has been shown via analytical derivations and computer simulations that the proposed PIM and GPIM systems have better error performance and considerable signal-to-noise ratio (SNR) gain compared to existing spatial modulation (SM), quadrature SM (QSM), and traditional M-ary systems.

eess.SP↗

arXiv2020

Hybrid RIS-Empowered Reflection and Decode-and-Forward Relaying for Coverage Extension

In this letter, we introduce two hybrid transmission schemes combining a passive reconfigurable intelligent surface (RIS) with decode-and-forward relaying in a synergistic manner. The proposed schemes offer a flexible as well as cost- and power-efficient solution for coverage extension in future generation wireless networks. We present closed-form expressions for the end-to-end signal-to-noise ratio of both schemes and a sequential optimization algorithm for the power allocation and the RIS phase configurations. Our computer simulations and theoretical analysis demonstrate that the RIS and relaying technologies enhance the achievable rate and error performance remarkably when working complementary to each other, rather than being considered as competing technologies.

cs.IT↗

arXiv2020

Uplink Achievable Rate Maximization for Reconfigurable Intelligent Surface Aided Millimeter Wave Systems with Resolution-Adaptive ADCs

In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bits, the RIS phase shifts, and the beam selection matrix. Due to the non-convexity of the feasible set and objective function, the formulated problem is non-convex and difficult to solve. To efficiently tackle this problem, a block coordinated descent (BCD)-based algorithm is proposed. Simulations demonstrate that an RIS can mitigate the hardware loss due to use of RADCs, and that the proposed BCD-based algorithm outperforms state-of-the-art algorithms.

eess.SP↗

arXiv2020

Reconfigurable Intelligent Surface-Assisted Uplink Sparse Code Multiple Access

Reconfigurable intelligent surface-empowered communication (RIS) and sparse code multiple access (SCMA) are promising candidates for future generations of wireless networks. The former enhances the transmission environments, whereas the latter provides a high spectral efficiency transmission. This letter proposes, for the first time, an RIS-assisted uplink SCMA (SCMA-RIS) scheme to improve the conventional SCMA spectrum efficiency. The message passing algorithm (MPA) is utilized and modified to decode the SCMA-RIS transmitted signals. Moreover, a low-complexity decoder for the SCMA-RIS scheme is proposed to significantly reduce the MPA decoding complexity and improve the bit error rate performance of the conventional SCMA. Monte-Carlo simulations and complexity analysis are presented, which support the findings.

cs.IT↗

arXiv2020

A Novel RIS-Assisted Modulation Scheme

In this work, in order to achieve higher spectrum efficiency, we propose a reconfigurable intelligent surface (RIS)-assisted multi-user communication uplink system. Different from previous work in which the RIS only optimizes the phase of the incident users's signal, we propose the use of the RIS to create a virtual constellation diagram to transmit the data of an additional user signal. We focus on the two-user case and develop a tight approximation for the cumulative distribution function (CDF) of the received signal-to-noise ratio of both users. Then, based on the proposed statistical distribution, we derive the analytical expressions of the average bit error rate of the considered two users. The paper shows the trade off between the performance of the two users against each other as a function of the proposed phase shift at the RIS.

cs.IT↗

arXiv2020

Exploiting Reconfigurable Intelligent Surfaces in Edge Caching: Joint Hybrid Beamforming and Content Placement Optimization

Edge caching can effectively reduce backhaul burden at core network and increase quality-ofservice at wireless edge nodes. However, the beneficial role of edge caching cannot be fully realized when the offloading link is in deep fade. Fortunately, the impairments induced by wireless propagation environments could be renovated by a reconfigurable intelligent surface (RIS). In this paper, a new RIS-aided edge caching system is proposed, where a network cost minimization problem is formulated to optimize content placement at cache units, active beamforming at base station and passive phase shifting at RIS. After decoupling the content placement subproblem with hybrid beamforming design, we propose an alternating optimization algorithm to tackle the active beamforming and passive phase shifting. For active beamforming, we transform the problem into a semidefinite programming (SDP) and prove that the optimal solution of SDP is always rank-1. For passive phase shifting, we introduce block coordinate descent method to alternately optimize the auxiliary variables and the RIS phase shifts. Further, a conjugate gradient algorithm based on manifold optimization is proposed to deal with the non-convex unit-modulus constraints. Numerical results show that our RIS-aided edge caching design can effectively decrease the network cost in terms of backhaul capacity and power consumption.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surfaces for Doppler Effect and Multipath Fading Mitigation

Extensive research has already started on 6G and beyond wireless technologies due to the envisioned new use-cases and potential new requirements for future wireless networks. Although a plethora of modern physical layer solutions have been introduced in the last few decades, it is undeniable that a level of saturation has been reached in terms of the available spectrum, adapted modulation/coding solutions and accordingly the maximum capacity. Within this context, communications through reconfigurable intelligent surfaces (RISs), which enable novel and effective functionalities including wave absorption, tuneable anomalous reflection, and reflection phase modification, appear as a potential candidate to overcome the inherent drawbacks of legacy wireless systems. The core idea of RISs is the transformation of the uncontrollable and random wireless propagation environment into a reconfigurable communication system entity that plays an active role in forwarding information. In this paper, the well-known multipath fading phenomenon is revisited in mobile wireless communication systems, and novel and unique solutions are introduced from the perspective of RISs. The feasibility of eliminating or mitigating the multipath fading effect stemming from the movement of mobile receivers is also investigated by utilizing the RISs. It is shown that rapid fluctuations in the received signal strength due to the Doppler effect can be effectively reduced by using the real-time tuneable RISs. It is also proven that the multipath fading effect can be totally eliminated when all reflectors in a propagation environment are coated with RISs, while even a few RISs can significantly reduce the Doppler spread as well as the deep fades in the received signal for general propagation environments with several interacting objects.

eess.SP↗

arXiv2020

Multidimensional Index Modulation for 5G and Beyond Wireless Networks

This study examines the flexible utilization of existing IM techniques in a comprehensive manner to satisfy the challenging and diverse requirements of 5G and beyond services. After spatial modulation (SM), which transmits information bits through antenna indices, application of IM to orthogonal frequency division multiplexing (OFDM) subcarriers has opened the door for the extension of IM into different dimensions, such as radio frequency (RF) mirrors, time slots, codes, and dispersion matrices. Recent studies have introduced the concept of multidimensional IM by various combinations of one-dimensional IM techniques to provide higher spectral efficiency (SE) and better bit error rate (BER) performance at the expense of higher transmitter (Tx) and receiver (Rx) complexity. Despite the ongoing research on the design of new IM techniques and their implementation challenges, proper use of the available IM techniques to address different requirements of 5G and beyond networks is an open research area in the literature. For this reason, we first provide the dimensional-based categorization of available IM domains and review the existing IM types regarding this categorization. Then, we develop a framework that investigates the efficient utilization of these techniques and establishes a link between the IM schemes and 5G services, namely enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable low-latency communication (URLLC). Additionally, this work defines key performance indicators (KPIs) to quantify the advantages and disadvantages of IM techniques in time, frequency, space, and code dimensions. Finally, future recommendations are given regarding the design of flexible IM-based communication systems for 5G and beyond wireless networks.

eess.SP↗