arXiv subjects

Erwan Lucas

Publications and source records attributed to Erwan Lucas.

27 records · Page 2Linked to original sources

arXiv2018

Spectral purification of microwave signals with disciplined dissipative Kerr solitons

Continuous-wave-driven Kerr nonlinear microresonators give rise to self-organization in terms of dissipative Kerr solitons, which constitute optical frequency combs that can be used to generate low-noise microwave signals. Here, by applying either amplitude or phase modulation to the driving laser we create an intracavity potential trap, to discipline the repetition rate of the solitons. We demonstrate that this effect gives rise to a novel spectral purification mechanism of the external microwave signal frequency, leading to reduced phase noise of the output signal. We experimentally observe that the microwave signal generated from disciplined solitons follows the external drive at long time scales, but exhibits an unexpected suppression of the fast timing jitter. Counter-intuitively, this filtering takes place for frequencies that are substantially lower than the cavity decay rate. As a result, while the long-time-scale stability of the Kerr frequency comb repetition rate is improved by more than 4 orders of magnitude as a result of locking to the external microwave signal, the soliton stream shows a reduction of the phase noise by 30 dB at offset frequencies above 10 kHz.

physics.app-ph↗

arXiv2018

Detuning-dependent Properties and Dispersion-induced Instabilities of Temporal Dissipative Kerr Solitons in Optical Microresonators

Temporal-dissipative Kerr solitons are self-localized light pulses sustained in driven nonlinear optical resonators. Their realization in microresonators has enabled compact sources of coherent optical frequency combs as well as the study of dissipative solitons. A key parameter of their dynamics is the effective-detuning of the pump laser to the thermally- and Kerr-shifted cavity resonance. Together with the free spectral range and dispersion, it governs the soliton-pulse duration, as predicted by an approximate analytical solution of the Lugiato-Lefever equation. Yet, a precise experimental verification of this relation was lacking so far. Here, by measuring and controlling the effective-detuning, we establish a new way of stabilizing solitons in microresonators and demonstrate that the measured relation linking soliton width and detuning deviates by less than 1 % from the approximate expression, validating its excellent predictive power. Furthermore, a detuning-dependent enhancement of specific comb lines is revealed, due to linear couplings between mode-families. They cause deviations from the predicted comb power evolution, and induce a detuning-dependent soliton recoil that modifies the pulse repetition-rate, explaining its unexpected dependence on laser-detuning. Finally, we observe that detuning-dependent mode-crossings can destabilize the soliton, leading to an unpredicted soliton breathing regime (oscillations of the pulse) that occurs in a normally-stable regime. Our results test the approximate analytical solutions with an unprecedented degree of accuracy and provide new insights into dissipative-soliton dynamics.

physics.optics↗

arXiv2018

Electrically pumped photonic integrated soliton microcomb

Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcombs is essential. To date, however, microcombs still rely on optical pumping by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.

physics.optics↗

arXiv2018

Spatial multiplexing of soliton microcombs

Dual-comb interferometry utilizes two optical frequency combs to map the optical field's spectrum to a radio-frequency signal without using moving parts, allowing improved speed and accuracy. However, the method is compounded by the complexity and demanding stability associated with operating multiple laser frequency combs. To overcome these challenges, we demonstrate simultaneous generation of multiple frequency combs from a single optical microresonator and a single continuous-wave laser. Similar to space-division multiplexing, we generate several dissipative Kerr soliton states - circulating solitonic pulses driven by a continuous-wave laser - in different spatial (or polarization) modes of a $\mathrm{MgF_2}$ microresonator. Up to three distinct combs are produced simultaneously, featuring excellent mutual coherence and substantial repetition rate differences, useful for fast acquisition and efficient rejection of soliton intermodulation products. Dual-comb spectroscopy with amplitude and phase retrieval, as well as optical sampling of a breathing soliton, is realised with the free-running system. Compatibility with photonic-integrated resonators could enable the deployment of dual- and triple-comb-based methods to applications where they remained impractical with current technology.

physics.optics↗

arXiv2017

Inter-mode breather solitons in optical microresonators

The observation of temporal dissipative Kerr solitons in optical microresonators provides, on the applied side, compact sources of coherent optical frequency combs that have already been applied in coherent communications, dual comb spectroscopy and metrology. On a fundamental level, it enables the study of soliton physics in driven nonlinear cavities. Microresonators are commonly multimode and, as a result, inter-mode interactions inherently occur among mode families - a condition referred to as "avoided mode crossings". Avoided mode crossings can cause soliton decay, but can also modify the soliton spectrum, leading to e.g. the formation of dispersive wave and inducing a spectral recoil. Yet, to date, the entailing temporal soliton dynamics from inter-mode interactions has rarely been studied, but is critical to understand regimes of soliton-stability. Here we report the discovery of an inter-mode breather soliton. Such breathing dynamics occurs within a laser detuning range where conventionally stationary dissipative solitons are expected. We demonstrate experimentally the phenomenon in two microresonator platforms (crystalline magnesium fluoride and photonic chip-based silicon nitride microresonators), and theoretically describe the dynamics based on a pair of coupled Lugiato-Lefever equations. We demonstrate experimentally that the breathing is associated with a periodic energy exchange between the soliton and another optical mode family. We further show that inter-mode interactions can be modeled by a response function acting on dissipative solitons. The observation of breathing dynamics in the conventionally stable soliton regime is critical to applications, ranging from low-noise microwave generation, frequency synthesis to spectroscopy. On a fundamental level, our results provide new understandings of the rich dissipative soliton dynamics in multimode nonlinear cavities.

physics.optics↗

arXiv2017

Octave-spanning dissipative Kerr soliton frequency combs in $Si_3N_4$ microresonators

Octave-spanning, self-referenced frequency combs are applied in diverse fields ranging from precision metrology to astrophysical spectrometer calibration. In the past decade, Kerr frequency comb generators have emerged as alternative scheme offering chip-scale integration, high repetition rate and bandwidths that are only limited by group velocity dispersion. The recent observation of Kerr frequency combs operating in the dissipative Kerr soliton (DKS) regime, along with dispersive wave formation, has provided the means for fully coherent, broadband Kerr frequency comb generation with engineered spectral envelope. Here, by carefully optimizing the photonic Damascene fabrication process, and dispersion engineering of $\mathrm{Si_{3}N_{4}}$ microresonators with $1\,\mathrm{THz}$ free spectral range, we achieve bandwidths exceeding one octave at low powers ($\mathcal{O}(100\,\mathrm{mW})$) for pump lasers residing in the telecom C-band ($1.55\,\mathrm{μm}$), as well as for the first time in the O-band ($1.3\,\mathrm{μm}$). Equally important, we find that for THz repetition rate comb states, conventional criteria applied to identify DKS comb states fail. Investigating the coherence of generated, octave-spanning Kerr comb states we unambiguously identify DKS states using a response measurement. This allows to demonstrate octave-spanning DKS comb states at both pump laser wavelengths of $1.3\mathrm{\,μm}$ and $1.55\,\mathrm{μm}$ including the broadest DKS state generated to date, spanning more than $200\,\mathrm{THz}$ of optical bandwidth. Octave spanning DKS frequency combs can form essential building blocks for metrology or spectroscopy, and their operation at $1.3\mathrm{\,μm}$ enables applications in life sciences such as Kerr comb based optical coherence tomography or dual comb coherent antistokes Raman scattering.

physics.optics↗

arXiv2016

Breathing dissipative solitons in optical microresonators

Dissipative solitons are self-localized structures resulting from a double balance between dispersion and nonlinearity as well as dissipation and a driving force. They occur in a wide variety of fields ranging from optics, hydrodynamics to chemistry and biology. Recently, significant interest has focused on their temporal realization in driven optical microresonators, known as dissipative Kerr solitons. They provide access to coherent, chip-scale optical frequency combs, which have already been employed in optical metrology, data communication and spectroscopy. Such Kerr resonator systems can exhibit numerous localized intracavity patterns and provide rich insights into nonlinear dynamics. A particular class of solutions consists of breathing dissipative solitons, representing pulses with oscillating amplitude and duration, for which no comprehensive understanding has been presented to date. Here, we observe and study single and multiple breathing dissipative solitons in two different microresonator platforms: crystalline $\mathrm{MgF_2}$ resonator and $\mathrm{Si_3N_4}$ integrated microring. We report a deterministic route to access the breathing state, which allowed for a detailed exploration of the breathing dynamics. In particular, we establish the link between the breathing frequency and two system control parameters - effective pump laser detuning and pump power. Using a fast detection, we present a direct observation of the spatiotemporal dynamics of individual solitons, revealing irregular oscillations and switching. An understanding of breathing solitons is not only of fundamental interest concerning nonlinear systems close to critical transition, but also relevant for applications to prevent breather-induced instabilities in soliton-based frequency combs.

physics.optics↗

arXiv2016

Self-referencing of an on-chip soliton Kerr frequency comb without external broadening

Self-referencing turns pulsed laser systems into self-referenced frequency combs. Such frequency combs allow counting of optical frequencies and have a wide range of applications. The required optical bandwidth to implement self-referencing is typically obtained via nonlinear broadening in optical fibers. Recent advances in the field of Kerr frequency combs have provided a path towards the development of compact frequency comb sources that provide broadband frequency combs, exhibit microwave repetition rates and that are compatible with on-chip photonic integration. These devices have the potential to significantly expand the use of frequency combs. Yet to date self-referencing of such Kerr frequency combs has only been attained by applying conventional, fiber based broadening techniques. Here we demonstrate external broadening-free self-referencing of a Kerr frequency comb. An optical spectrum that spans two-thirds of an octave is directly synthesized from a continuous wave laser-driven silicon nitride microresonator using temporal dissipative Kerr soliton formation and soliton Cherenkov radiation. Using this coherent bandwidth and two continuous wave transfer lasers in a 2f-3f self-referencing scheme, we are able to detect the offset frequency of the soliton Kerr frequency comb. By stabilizing the repetition rate to a radio frequency reference the self-referenced frequency comb is used to count and track the continuous wave pump laser's frequency. This work demonstrates the principal ability of soliton Kerr frequency combs to provide microwave-to-optical clockworks on a chip.

physics.optics↗

arXiv2016

Quantum cascade laser Kerr frequency comb

The mid-infrared (mid-IR) regime (typically the wavelength regime of $λ\sim 2.5-20 \ \mathrm{μm}$) is an important spectral range for spectroscopy as many molecules have their fundamental rotational-vibrational absorption in this band. Recently optical frequency combs based on optical microresonators ("Kerr" combs) at the onset of the mid-IR region have been generated using crystalline resonators and integrated planar silicon micro-resonators. Here we extend for the first time Kerr combs deep into the mid-IR i.e. the 'molecular fingerprint' region. This is achieved by combining an ultra high quality (Q) factor mid-IR microresonator based on crystalline $\mathrm{MgF_{2}}$ with the quantum cascade laser (QCL) technology. Using a tapered chalgogenide (ChG) fiber and a QCL continuous wave pump laser, frequency combs at $λ\sim 4.4\ \mathrm{μm}$ (i.e. 2270cm$^{-1}$) are generated, that span over 600nm (i.e. 300cm$^{-1}$) in bandwidth, with a mode spacing of 14.3GHz (0.5cm$^{-1}$), corresponding to more than 700 comb lines. Numerical simulations of the Kerr comb formation and the resonator dispersion predict that even larger bandwidth and coherent operation in the soliton regime may be achieved by dispersion engineering of the crystalline microresonator. The combination of ultra-high Q crystalline microresonators and CW QCL sources is a promising platform for broadband, compact sources of frequency combs in the mid-IR, that provides a route to compact mid-IR spectrometers.

physics.optics↗