arXiv subjects

Esteban Martinez

Publications and source records attributed to Esteban Martinez.

9 recordsLinked to original sources

arXiv2025

Distinct Lifetimes for $X$ and $Z$ Loop Measurements in a Majorana Tetron Device

We present a hardware realization and measurements of a tetron qubit device in a superconductor-semiconductor heterostructure. The device architecture contains two parallel superconducting nanowires, which support four Majorana zero modes (MZMs) when tuned into the topological phase, and a trivial superconducting backbone. Two distinct readout interferometers are formed by connecting the superconducting structure to a series of quantum dots. We perform single-shot interferometric measurements of the fermion parity for the two loops, designed to implement Pauli-$X$ and $Z$ measurements of the tetron. Performing repeated single-shot measurements yields two widely separated time scales $\tau_X = 14.5\pm 0.3 \, \mathrm{\mu s}$ and $\tau_Z = 12.4\pm 0.4\, \mathrm{ms}$ for parity switches observed in the $X$ and $Z$ measurement loops, which we attribute to intra-wire parity switches and external quasiparticle poisoning, respectively. We estimate assignment errors of $\mathrm{err}^X_a=16\%$ and $\mathrm{err}^Z_a=0.5\%$ for $X$ and $Z$ measurement-based operations, respectively.

cond-mat.mes-hall↗

arXiv2025

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944.

cond-mat.mes-hall↗

arXiv2025

Roadmap to fault tolerant quantum computation using topological qubit arrays

We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation.

quant-ph↗

arXiv2024

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $\mu$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $\mu$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.

cond-mat.mes-hall↗

arXiv2022

InAs-Al Hybrid Devices Passing the Topological Gap Protocol

We present measurements and simulations of semiconductor-superconductor heterostructure devices that are consistent with the observation of topological superconductivity and Majorana zero modes. The devices are fabricated from high-mobility two-dimensional electron gases in which quasi-one-dimensional wires are defined by electrostatic gates. These devices enable measurements of local and non-local transport properties and have been optimized via extensive simulations to ensure robustness against non-uniformity and disorder. Our main result is that several devices, fabricated according to the design's engineering specifications, have passed the topological gap protocol defined in Pikulin et al. [arXiv:2103.12217]. This protocol is a stringent test composed of a sequence of three-terminal local and non-local transport measurements performed while varying the magnetic field, semiconductor electron density, and junction transparencies. Passing the protocol indicates a high probability of detection of a topological phase hosting Majorana zero modes as determined by large-scale disorder simulations. Our experimental results are consistent with a quantum phase transition into a topological superconducting phase that extends over several hundred millitesla in magnetic field and several millivolts in gate voltage, corresponding to approximately one hundred micro-electron-volts in Zeeman energy and chemical potential in the semiconducting wire. These regions feature a closing and re-opening of the bulk gap, with simultaneous zero-bias conductance peaks at both ends of the devices that withstand changes in the junction transparencies. The extracted maximum topological gaps in our devices are 20-60 $\mu$eV. This demonstration is a prerequisite for experiments involving fusion and braiding of Majorana zero modes.

cond-mat.mes-hall↗

arXiv2017

Quantum estimation of unknown parameters

We discuss the problem of finding the best measurement strategy for estimating the value of a quantum system parameter. In general the optimum quantum measurement, in the sense that it maximizes the quantum Fisher information and hence allows one to minimize the estimation error, can only be determined if the value of the parameter is already known. A modification of the quantum Van Trees inequality, which gives a lower bound on the error in the estimation of a random parameter, is proposed. The suggested inequality allows us to assert if a particular quantum measurement, together with an appropriate estimator, is optimal. An adaptive strategy to estimate the value of a parameter, based on our modified inequality, is proposed.

quant-ph↗

arXiv2016

U(1) Wilson lattice gauge theories in digital quantum simulators

Lattice gauge theories describe fundamental phenomena in nature, but calculating their real-time dynamics on classical computers is notoriously difficult. In a recent publication [Nature 534, 516 (2016)], we proposed and experimentally demonstrated a digital quantum simulation of the paradigmatic Schwinger model, a U(1)-Wilson lattice gauge theory describing the interplay between fermionic matter and gauge bosons. Here, we provide a detailed theoretical analysis of the performance and the potential of this protocol. Our strategy is based on analytically integrating out the gauge bosons, which preserves exact gauge invariance but results in complicated long-range interactions between the matter fields. Trapped-ion platforms are naturally suited to implementing these interactions, allowing for an efficient quantum simulation of the model, with a number of gate operations that scales only polynomially with system size. Employing numerical simulations, we illustrate that relevant phenomena can be observed in larger experimental systems, using as an example the production of particle--antiparticle pairs after a quantum quench. We investigate theoretically the robustness of the scheme towards generic error sources, and show that near-future experiments can reach regimes where finite-size effects are insignificant. We also discuss the challenges in quantum simulating the continuum limit of the theory. Using our scheme, fundamental phenomena of lattice gauge theories can be probed using a broad set of experimentally accessible observables, including the entanglement entropy and the vacuum persistence amplitude.

quant-ph↗

arXiv2015

Heat transport through ion crystals

We study the thermodynamical properties of crystals of trapped ions which are laser cooled to two different temperatures in two separate regions. We show that these properties strongly depend on the structure of the ion crystal. Such structure can be changed by varying the trap parameters and undergoes a series of phase transitions from linear to zig-zag or helicoidal configurations. Thus, we show that these systems are ideal candidates to observe and control the transition from anomalous to normal heat transport. All structures behave as `heat superconductors', with a thermal conductivity increasing linearly with system size and a vanishing thermal gradient inside the system. However, zig-zag and helicoidal crystals turn out to be hyper sensitive to disorder having a linear temperature profile and a length independent conductivity. Interestingly, disordered 2D ion crystals are heat insulators. Sensitivity to disorder is much smaller in the 1D case.

quant-ph↗

arXiv2013

A quantum information processor with trapped ions

Quantum computers hold the promise to solve certain problems exponentially faster than their classical counterparts. Trapped atomic ions are among the physical systems in which building such a computing device seems viable. In this work we present a small-scale quantum information processor based on a string of $^{40}$Ca${^+}$ ions confined in a macroscopic linear Paul trap. We review our set of operations which includes non-coherent operations allowing us to realize arbitrary Markovian processes. In order to build a larger quantum information processor it is mandatory to reduce the error rate of the available operations which is only possible if the physics of the noise processes is well understood. We identify the dominant noise sources in our system and discuss their effects on different algorithms. Finally we demonstrate how our entire set of operations can be used to facilitate the implementation of algorithms by examples of the quantum Fourier transform and the quantum order finding algorithm.

quant-ph↗