arXiv subjects

Euclid Collaboration

Publications and source records attributed to Euclid Collaboration.

At least 91 records · Page 5Linked to original sources

arXiv2025

Euclid preparation: The NISP spectroscopy channel, on ground performance and calibration

ESA's Euclid cosmology mission relies on the very sensitive and accurately calibrated spectroscopy channel of the Near-Infrared Spectrometer and Photometer (NISP). With three operational grisms in two wavelength intervals, NISP provides diffraction-limited slitless spectroscopy over a field of $0.57$ deg$^2$. A blue grism $\text{BG}_\text{E}$ covers the wavelength range $926$--$1366$\,nm at a spectral resolution $R=440$--$900$ for a $0.5''$ diameter source with a dispersion of $1.24$ nm px$^{-1}$. Two red grisms $\text{RG}_\text{E}$ span $1206$ to $1892$\,nm at $R=550$--$740$ and a dispersion of $1.37$ nm px$^{-1}$. We describe the construction of the grisms as well as the ground testing of the flight model of the NISP instrument where these properties were established.

astro-ph.IM↗

arXiv2025

Euclid Quick Data Release (Q1). First Euclid statistical study of galaxy mergers and their connection to active galactic nuclei

Galaxy major mergers are a key pathway to trigger AGN. We present the first detection of major mergers in the Euclid Deep Fields and analyse their connection with AGN. We constructed a stellar-mass-complete ($M_*>10^{9.8}\,M_{\odot}$) sample of galaxies from the first quick data release (Q1), in the redshift range z=0.5-2. We selected AGN using X-ray data, optical spectroscopy, mid-infrared colours, and processing \IE observations with an image decomposition algorithm. We used CNNs trained on cosmological simulations to classify galaxies as mergers and non-mergers. We found a larger fraction of AGN in mergers compared to the non-merger controls for all AGN selections, with AGN excess factors ranging from 2 to 6. Likewise, a generally larger merger fraction ($f_{merg}$) is seen in active galaxies than in the non-active controls. We analysed $f_{merg}$ as a function of the AGN bolometric luminosity ($L_{bol}$) and the contribution of the point-source to the total galaxy light in the \IE-band ($f_{PSF}$) as a proxy for the relative AGN contribution fraction. We uncovered a rising $f_{merg}$, with increasing $f_{PSF}$ up to $f_{PSF}=0.55$, after which we observed a decreasing trend. We then derived the point-source luminosity ($L_{PSF}$) and showed that $f_{merg}$ monotonically increases as a function of $L_{PSF}$ at z<0.9, with $f_{merg}>$50% for $L_{PSF}>2\,10^{43}$ erg/s. At z>0.9, $f_{merg}$ rises as a function of $L_{PSF}$, though mergers do not dominate until $L_{PSF}=10^{45}$ erg/s. For X-ray and spectroscopic AGN, we computed $L_{bol}$, which has a positive correlation with $f_{merg}$ for X-ray AGN, while shows a less pronounced trend for spectroscopic AGN due to the smaller sample size. At $L_{bol}>10^{45}$ erg/s, AGN mostly reside in mergers. We concluded that mergers are strongly linked to the most powerful, dust-obscured AGN, associated with rapid supermassive black hole growth.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). Optical and near-infrared identification and classification of point-like X-ray selected sources

To better understand the role of active galactic nuclei (AGN) in galaxy evolution, it is crucial to achieve a complete and pure AGN census. X-ray surveys are key to this, but identifying their counterparts (CTPs) at other wavelengths remains challenging due to their larger positional uncertainties and limited availability of deeper, uniform ancillary data. Euclid is revolutionising this effort, offering extensive coverage of nearly the entire extragalactic sky, particularly in the near-infrared bands, where AGN are more easily detected. With the first Euclid Quick Data Release (Q1), we identifyed, classifyed, and determined the redshifts of Euclid CTPs to known point-like sources from major X-ray surveys, including XMM-Newton, Chandra, and eROSITA. Using Bayesian statistics, combined with machine learning (ML), we identify the CTPs to 11 286 X-ray sources from the three X-ray telescopes. For the large majority of 10 194 sources, the associations are unique, with the remaining $\sim$ 10% of multi-CTP cases equally split between XMM-Newton and eROSITA. ML is then used to distinguish between Galactic (8%) and extragalactic (92%) sources. We computed photo-zs using deep learning for the 8617 sources detected in the 10th data release of the DESI Legacy Survey, reaching an accuracy and a fraction of outliers of about 5%. Based on their X-ray luminosities, over 99% of CTPs identified as extragalactic are classified as AGN, most of which appear unobscured given their hardness ratios. With this paper, we release our catalogue, which includes identifiers, basic X-ray properties, the details of the associations, and additional features such as Galactic/extragalactic classifications and photometric/spectroscopic redshifts. We also provide probabilities for sub-selecting the sample based on purity and completeness, allowing users to tailor the sample according to their specific needs.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). First detections from the galaxy cluster workflow

The first survey data release by the Euclid mission covers approximately $63\,\mathrm{deg^2}$ in the Euclid Deep Fields to the same depth as the Euclid Wide Survey. This paper showcases, for the first time, the performance of cluster finders on Euclid data and presents examples of validated clusters in the Quick Release 1 (Q1) imaging data. We identify clusters using two algorithms (AMICO and PZWav) implemented in the Euclid cluster-detection pipeline. We explore the internal consistency of detections from the two codes, and cross-match detections with known clusters from other surveys using external multi-wavelength and spectroscopic data sets. This enables assessment of the Euclid photometric redshift accuracy and also of systematics such as mis-centring between the optical cluster centre and centres based on X-ray and/or Sunyaev--Zeldovich observations. We report 426 joint PZWav and AMICO-detected clusters with high signal-to-noise ratios over the full Q1 area in the redshift range $0.2 \leq z \leq 1.5$. The chosen redshift and signal-to-noise thresholds are motivated by the photometric quality of the early Euclid data. We provide richness estimates for each of the Euclid-detected clusters and show its correlation with various external cluster mass proxies. Out of the full sample, 77 systems are potentially new to the literature. Overall, the Q1 cluster catalogue demonstrates a successful validation of the workflow ahead of the Euclid Data Release 1, based on the consistency of internal and external properties of Euclid-detected clusters.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). Exploring galaxy morphology across cosmic time through Sersic fits

We present the results of the single-component Sérsic profile fitting for the magnitude-limited sample of \IE$<23$ galaxies within the 63.1 deg$^2$ area of the Euclid Quick Data Release (Q1). The associated morphological catalogue includes two sets of structural parameters fitted using \texttt{SourceXtractor++}: one for VIS \IE images and one for a combination of three NISP images in \YE, \JE and \HE bands. We compare the resulting Sérsic parameters to other morphological measurements provided in the Q1 data release, and to the equivalent parameters based on higher-resolution \HST imaging. These comparisons confirm the consistency and the reliability of the fits to Q1 data. Our analysis of colour gradients shows that NISP profiles have systematically smaller effective radii ($R_{\rm e}$) and larger Sérsic indices ($n$) than in VIS. In addition, we highlight trends in NISP-to-VIS parameter ratios with both magnitude and $n_{\rm VIS}$. From the 2D bimodality of the $(u-r)$ colour-$\log(n)$ plane, we define a $(u-r)_{\rm lim}(n)$ that separates early- and late-type galaxies (ETGs and LTGs). We use the two subpopulations to examine the variations of $n$ across well-known scaling relations at $z<1$. ETGs display a steeper size--stellar mass relation than LTGs, indicating a difference in the main drivers of their mass assembly. Similarly, LTGs and ETGs occupy different parts of the stellar mass--star-formation rate plane, with ETGs at higher masses than LTGs, and further down below the Main Sequence of star-forming galaxies. This clear separation highlights the link known between the shutdown of star formation and morphological transformations in the Euclid imaging data set. In conclusion, our analysis demonstrates both the robustness of the Sérsic fits available in the Q1 morphological catalogue and the wealth of information they provide for studies of galaxy evolution with Euclid.

astro-ph.GA↗

arXiv2025

Euclid preparation. LXXIV. Euclidised observations of Hubble Frontier Fields and CLASH galaxy clusters

We present HST2EUCLID, a novel Python code to generate Euclid realistic mock images in the $H_{\rm E}$, $J_{\rm E}$, $Y_{\rm E}$, and $I_{\rm E}$ photometric bands based on panchromatic Hubble Space Telescope observations. The software was used to create a simulated database of Euclid images for the 27 galaxy clusters observed during the Cluster Lensing And Supernova survey with Hubble (CLASH) and the Hubble Frontier Fields (HFF) program. Since the mock images were generated from real observations, they incorporate, by construction, all the complexity of the observed galaxy clusters. The simulated Euclid data of the galaxy cluster MACS J0416.1$-$2403 were then used to explore the possibility of developing strong lensing models based on the Euclid data. In this context, complementary photometric or spectroscopic follow-up campaigns are required to measure the redshifts of multiple images and cluster member galaxies. By Euclidising six parallel blank fields obtained during the HFF program, we provide an estimate of the number of galaxies detectable in Euclid images per ${\rm deg}^2$ per magnitude bin (number counts) and the distribution of the galaxy sizes. Finally, we present a preview of the Chandra Deep Field South that will be observed during the Euclid Deep Survey and two examples of galaxy-scale strong lensing systems residing in regions of the sky covered by the Euclid Wide Survey. The methodology developed in this work lends itself to several additional applications, as simulated Euclid fields based on HST (or JWST) imaging with extensive spectroscopic information can be used to validate the feasibility of legacy science cases or to train deep learning techniques in advance, thus preparing for a timely exploitation of the Euclid Survey data.

astro-ph.CO↗

arXiv2025

Euclid preparation. Establishing the quality of the 2D reconstruction of the filaments of the cosmic web with DisPerSE using Euclid photometric redshifts

Cosmic filaments are prominent structures of the matter distribution of the Universe. Modern detection algorithms are an efficient way to identify filaments in large-scale observational surveys of galaxies. Many of these methods were originally designed to work with simulations and/or well-sampled spectroscopic surveys. When spectroscopic redshifts are not available, the filaments of the cosmic web can be detected in projection using photometric redshifts in slices along the Line of Sight, which enable the exploration of larger cosmic volumes. However, this comes at the expense of a lower redshift precision. It is therefore crucial to assess the differences between filaments extracted from exact redshifts and from photometric redshifts for a specific survey. We apply this analysis to capture the uncertainties and biases of filament extractions introduced by using the photometric sample of the Euclid Wide Survey. The question that we address in this work is how can we compare two filament samples derived with redshifts of different precisions in the Euclid Wide Survey context. We apply the cosmic web detection algorithm DisPerSE, in the redshift range $0.1 \leq z \leq 0.5$, to the GAlaxy Evolution and Assembly (GAEA) simulated galaxy sample which reproduces several characteristics of the Euclid Wide Survey. We develop a method to compare skeletons derived from photometric redshifts to those derived from true galaxy positions. This method expands the commonly used measure of distance between filaments to include geometrical (angles between filaments) and astrophysical considerations (galaxy mass gradients and connectivity-mass relations). We assess whether this approach strengthens our ability to correctly identify filaments in very large surveys such as the Euclid Wide Survey. [abridged]

astro-ph.CO↗

arXiv2025

Euclid preparation. Spatially resolved stellar populations of local galaxies with Euclid: a proof of concept using synthetic images with the TNG50 simulation

The European Space Agency's Euclid mission will observe approximately 14,000 $\rm{deg}^{2}$ of the extragalactic sky and deliver high-quality imaging for many galaxies. The depth and high spatial resolution of the data will enable a detailed analysis of stellar population properties of local galaxies. In this study, we test our pipeline for spatially resolved SED fitting using synthetic images of Euclid, LSST, and GALEX generated from the TNG50 simulation. We apply our pipeline to 25 local simulated galaxies to recover their resolved stellar population properties. We produce 3 types of data cubes: GALEX + LSST + Euclid, LSST + Euclid, and Euclid-only. We perform the SED fitting tests with two SPS models in a Bayesian framework. Because the age, metallicity, and dust attenuation estimates are biased when applying only classical formulations of flat priors, we examine the effects of additional priors in the forms of mass-age-$Z$ relations, constructed using a combination of empirical and simulated data. Stellar-mass surface densities can be recovered well using any of the 3 data cubes, regardless of the SPS model and prior variations. The new priors then significantly improve the measurements of mass-weighted age and $Z$ compared to results obtained without priors, but they may play an excessive role compared to the data in determining the outcome when no UV data is available. The spatially resolved SED fitting method is powerful for mapping the stellar populations of galaxies with the current abundance of high-quality imaging data. Our study re-emphasizes the gain added by including multiwavelength data from ancillary surveys and the roles of priors in Bayesian SED fitting. With the Euclid data alone, we will be able to generate complete and deep stellar mass maps of galaxies in the local Universe, thus exploiting the telescope's wide field, NIR sensitivity, and high spatial resolution.

astro-ph.GA↗

arXiv2025

Euclid preparation: Expected constraints on initial conditions

The Euclid mission of the European Space Agency will deliver galaxy and cosmic shear surveys, which will be used to constrain initial conditions and statistics of primordial fluctuations. We present highlights for the Euclid scientific capability to test initial conditions beyond LCDM with the main probes, i.e. 3D galaxy clustering from the spectroscopic survey, the tomographic approach to 3x2pt statistics from photometric galaxy survey, and their combination. We provide Fisher forecasts from the combination of Euclid spectroscopic and photometric surveys for spatial curvature, running of the spectral index of the power spectrum of curvature perturbations, isocurvature perturbations, and primordial features. For the parameters of these models we also provide the combination of Euclid forecasts (pessimistic and optimistic) with current and future measurements of the cosmic microwave background (CMB) anisotropies., i.e. Planck, the Simons Observatory (SO), and CMB-S4. We provide Fisher forecasts for how the power spectrum and bispectrum from the Euclid spectroscopic survey will constrain the local, equilateral, and orthogonal shapes of primordial non-Gaussianity. We also review how Bayesian field-level inference of primordial non-Gaussianity can constrain local primordial non-Gaussianity. We show how Euclid, with its unique combination of the main probes, will provide the tightest constraints on low redshift to date. By targeting a markedly different range in redshift and scale, Euclid's expected uncertainties are complementary to those obtained by CMB primary anisotropy, returning the tightest combined constraints on the physics of the early Universe.

astro-ph.CO↗

arXiv2025

Euclid VI. NISP-P optical ghosts

The Near-Infrared Spectrometer and Photometer (NISP) onboard Euclid includes several optical elements in its path, which introduce artefacts into the data from non-nominal light paths. To ensure uncontaminated source photometry, these artefacts must be accurately accounted for. This paper focuses on two specific optical features in NISP's photometric data (NISP-P): ghosts caused by the telescope's dichroic beamsplitter, and the bandpass filters within the NISP fore-optics. Both ghost types exhibit a characteristic morphology and are offset from the originating stars. The offsets are well modelled using 2D polynomials, with only stars brighter than approximately 10 magnitudes in each filter producing significant ghost contributions. The masking radii for these ghosts depend on both the source-star brightness and the filter wavelength, ranging from 20 to 40 pixels. We present the final relations and models used in the near-infrared (NIR) data pipeline to mask these ghosts for Euclid's Quick Data Release (Q1).

astro-ph.IM↗

arXiv2025

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗

arXiv2025

Euclid preparation. Full-shape modelling of 2-point and 3-point correlation functions in real space

We investigate the accuracy and range of validity of the perturbative model for the 2-point (2PCF) and 3-point (3PCF) correlation functions in real space in view of the forthcoming analysis of the Euclid mission spectroscopic sample. We take advantage of clustering measurements from four snapshots of the Flagship I N-body simulations at z = {0.9, 1.2, 1.5, 1.8}, which mimic the expected galaxy population in the ideal case of absence of observational effects such as purity and completeness. For the 3PCF we consider all available triangle configurations given a minimal separation. First, we assess the model performance by fixing the cosmological parameters and evaluating the goodness-of-fit provided by the perturbative bias expansion in the joint analysis of the two statistics, finding overall agreement with the data down to separations of 20 Mpc/h. Subsequently, we build on the state-of-the-art and extend the analysis to include the dependence on three cosmological parameters: the amplitude of scalar perturbations As, the matter density ωcdm and the Hubble parameter h. To achieve this goal, we develop an emulator capable of generating fast and robust modelling predictions for the two summary statistics, allowing efficient sampling of the joint likelihood function. We therefore present the first joint full-shape analysis of the real-space 2PCF and 3PCF, testing the consistency and constraining power of the perturbative model across both probes, and assessing its performance in a combined likelihood framework. We explore possible systematic uncertainties induced by the perturbative model at small scales finding an optimal scale cut of rmin = 30 Mpc/h for the 3PCF, when imposing an additional limitation on nearly isosceles triangular configurations included in the data vector. This work is part of a Euclid Preparation series validating theoretical models for galaxy clustering.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine C: Finding lenses with machine learning

Strong gravitational lensing has the potential to provide a powerful probe of astrophysics and cosmology, but fewer than 1000 strong lenses have been confirmed so far. With a 0.16'' resolution covering a third of the sky, the Euclid telescope will revolutionise the identification of strong lenses, with 170 000 lenses forecasted to be discovered amongst the 1.5 billion galaxies it will observe. We present an analysis of the performance of five machine-learning models at finding strong gravitational lenses in the quick release of Euclid data (Q1) covering 63 deg2. The models have been validated by citizen scientists and expert visual inspection. We focus on the best-performing network: a fine-tuned version of the Zoobot pretrained model originally trained to classify galaxy morphologies in heterogeneous astronomical imaging surveys. Of the one million Q1 objects that Zoobot was tasked to find strong lenses within, the top 1000 ranked objects contain 122 grade A lenses (almost-certain lenses) and 41 grade B lenses (probable lenses). A deeper search with the five networks combined with visual inspection yielded 250 (247) grade A (B) lenses, of which 224 (182) are ranked in the top 20 000 by Zoobot. When extrapolated to the full Euclid survey, the highest ranked one million images will contain 75 000 grade A or B strong gravitational lenses.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): From images to multiwavelength catalogues: the Euclid MERge Processing Function

The Euclid satellite is an ESA mission that was launched in July 2023. \Euclid is working in its regular observing mode with the target of observing an area of $14\,000~\text{deg}^2$ with two instruments, the Visible Camera (VIS) and the Near IR Spectrometer and Photometer (NISP) down to $I_{\rm E} = 24.5~\text{mag}$ ($10\, σ$) in the Euclid Wide Survey. Ground-based imaging data in the \textit{ugriz} bands complement the \Euclid data to enable photo-$z$ determination and VIS PSF modeling for week lensing analysis. Euclid investigates the distance-redshift relation and the evolution of cosmic structures by measuring shapes and redshifts of galaxies and clusters of galaxies out to $z\sim 2$. Generating the multi-wavelength catalogues from \Euclid and ground-based data is an essential part of the \Euclid data processing system. In the framework of the \Euclid Science Ground Segment (SGS), the aim of the MER Processing Function (PF) pipeline is to detect objects in the \Euclid imaging data, measure their properties, and MERge them into a single multi-wavelength catalogue. The MER PF pipeline performs source detection on both visible (VIS) and near-infrared (NIR) images and offers four different photometric measurements: Kron total flux, aperture photometry on PSF-matched images, template fitting photometry, and Sérsic fitting photometry. Furthermore, the MER PF pipeline measures a set of ancillary quantities, spanning from morphology to quality flags, to better characterise all detected sources. In this paper, we show how the MER PF pipeline is designed, detailing its main steps, and we show that the pipeline products meet the tight requirements that Euclid aims to achieve on photometric accuracy. We also present the other measurements (e.g. morphology) that are included in the OU-MER output catalogues and we list all output products coming out of the MER PF pipeline.

astro-ph.IM↗

arXiv2025

Euclid preparation. Constraining parameterised models of modifications of gravity with the spectroscopic and photometric primary probes

The Euclid mission has the potential to understand the fundamental physical nature of late-time cosmic acceleration and, as such, of deviations from the standard cosmological model, LCDM. In this paper, we focus on model-independent methods to modify the evolution of scalar perturbations at linear scales. We consider two approaches: the first is based on the two phenomenological modified gravity (PMG) parameters, $μ_{\rm mg}$ and $Σ_{\rm mg}$, which are phenomenologically connected to the clustering of matter and weak lensing, respectively; and the second is the effective field theory (EFT) of dark energy and modified gravity, which we use to parameterise the braiding function, $α_{\rm B}$, which defines the mixing between the metric and the dark energy field. We discuss the predictions from spectroscopic and photometric primary probes by Euclid on the cosmological parameters and a given set of additional parameters featuring the PMG and EFT models. We use the Fisher matrix method applied to spectroscopic galaxy clustering (GCsp), weak lensing (WL), photometric galaxy clustering (GCph), and cross-correlation (XC) between GCph and WL. For the modelling of photometric predictions on nonlinear scales, we use the halo model to cover two limits for the screening mechanism: the unscreened (US) case, for which the screening mechanism is not present; and the super-screened (SS) case, which assumes strong screening. We also assume scale cuts to account for our uncertainties in the modelling of nonlinear perturbation evolution. We choose a time-dependent form for $\{μ_{\rm mg},Σ_{\rm mg}\}$, with two fiducial sets of values for the corresponding model parameters at the present time, $\{\barμ_0,\barΣ_0\}$, and two forms for $α_{\rm B}$, with one fiducial set of values for each of the model parameters, $α_{\rm B,0}$ and $\{α_{\rm B,0},m\}$. (Abridged)

astro-ph.CO↗

arXiv2025

Euclid preparation LXXI. Simulations and nonlinearities beyond $\mathsfΛ$CDM. 3. Constraints on $f(R)$ models from the photometric primary probes

We study the constraint on $f(R)$ gravity that can be obtained by photometric primary probes of the Euclid mission. Our focus is the dependence of the constraint on the theoretical modelling of the nonlinear matter power spectrum. In the Hu-Sawicki $f(R)$ gravity model, we consider four different predictions for the ratio between the power spectrum in $f(R)$ and that in $Λ$CDM: a fitting formula, the halo model reaction approach, ReACT and two emulators based on dark matter only $N$-body simulations, FORGE and e-Mantis. These predictions are added to the MontePython implementation to predict the angular power spectra for weak lensing (WL), photometric galaxy clustering and their cross-correlation. By running Markov Chain Monte Carlo, we compare constraints on parameters and investigate the bias of the recovered $f(R)$ parameter if the data are created by a different model. For the pessimistic setting of WL, one dimensional bias for the $f(R)$ parameter, $\log_{10}|f_{R0}|$, is found to be $0.5 σ$ when FORGE is used to create the synthetic data with $\log_{10}|f_{R0}| =-5.301$ and fitted by e-Mantis. The impact of baryonic physics on WL is studied by using a baryonification emulator BCemu. For the optimistic setting, the $f(R)$ parameter and two main baryon parameters are well constrained despite the degeneracies among these parameters. However, the difference in the nonlinear dark matter prediction can be compensated by the adjustment of baryon parameters, and the one-dimensional marginalised constraint on $\log_{10}|f_{R0}|$ is biased. This bias can be avoided in the pessimistic setting at the expense of weaker constraints. For the pessimistic setting, using the $Λ$CDM synthetic data for WL, we obtain the prior-independent upper limit of $\log_{10}|f_{R0}|< -5.6$. Finally, we implement a method to include theoretical errors to avoid the bias.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). A first view of the star-forming main sequence in the Euclid Deep Fields

The star-forming main sequence (SFMS) is a tight relation observed between stellar masses and star formation rates (SFR) in a population of galaxies. This relation is observed at different redshifts, in various morphological, and environmental domains, and is key to understanding the underlying relations between a galaxy budget of cold gas and its stellar content. Euclid Quick Data Release 1 (Q1) gives us the opportunity to investigate this fundamental relation in galaxy formation and evolution. We complement the Euclid release with public IRAC observations of the Euclid Deep Fields, improving the quality of recovered photometric redshifts, stellar masses, and SFRs, as is shown both with simulations and a comparison with available spectroscopic redshifts. From Q1 data alone, we recover more than $\sim 30\,\mathrm{k}$ galaxies with $\log_{10} (M_\ast/M_\odot) > 11$, giving a precise constraint of the SFMS at the high-mass end. We investigated the SFMS, in a redshift interval between $0.2$ and $3.0$, comparing our results with the existing literature and fitting them with a parameterisation taking into account the presence of a bending of the relation at the high-mass end, depending on the bending mass, $M_0$. We find good agreement with previous results in terms of $M_0$ values, and an increasing trend for the relation scatter at higher stellar masses. We also investigate the distribution of physical (e.g. dust absorption, $A_V$, and formation age) and morphological properties (e.g., Sérsic index and radius) in the SFR--stellar mass plane, and their relation with the SFMS. These results highlight the potential of Euclid in studying the fundamental scaling relations that regulate galaxy formation and evolution in anticipation of the forthcoming Data Release 1.

astro-ph.GA↗

arXiv2025

Euclid preparation: TBD. Cosmic Dawn Survey: evolution of the galaxy stellar mass function across 0.2<z<6.5 measured over 10 square degrees

The Cosmic Dawn Survey Pre-launch (PL) catalogues cover an effective 10.13 deg$^{2}$ area with uniform deep Spitzer/IRAC data ($m\sim25$ mag, 5$σ$), the largest area covered to these depths in the infrared. These data are used to gain new insight into the growth of stellar mass across cosmic history by characterising the evolution of the galaxy stellar mass function (GSMF) through $0.2 < z \leq 6.5$. The total volume (0.62 Gpc$^{3}$) represents a tenfold increase compared to previous works that have explored $z > 3$ and significantly reduces cosmic variance, yielding strong constraints on the abundance of massive galaxies. Results are generally consistent with the literature but now provide firm estimates of number density where only upper limits were previously available. Contrasting the GSMF with the dark matter halo mass function suggests that massive galaxies ($M \gtrsim10^{11}$ M$_{\odot}$) at $z > 3.5$ required integrated star-formation efficiencies of $M/(M_{\rm h}f_{\rm b}) \gtrsim$ 0.25--0.5, in excess of the commonly-held view of ``universal peak efficiency" from studies on the stellar-to-halo mass relation (SHMR). Such increased efficiencies imply an evolving peak in the SHMR at $z > 3.5$ which can be maintained if feedback mechanisms from active galactic nuclei and stellar processes are ineffective at early times. In addition, a significant fraction of the most massive quiescent galaxies are observed to be in place already by $z\sim 2.5$--3. The apparent lack in change of their number density by $z\sim 0.2$ is consistent with relatively little mass growth from mergers. Utilising the unique volume, evidence for an environmental dependence of the galaxy stellar mass function is found all the way through $z\sim 3.5$ for the first time, though a more careful characterisation of the density field is ultimately required for confirmation.

astro-ph.GA↗