arXiv subjects

Eugene Vasiliev

Publications and source records attributed to Eugene Vasiliev.

At least 19 recordsLinked to original sources

arXiv2026

Disentangling the Morphology of Palomar~5: Effects of the Bar, Spiral Arms, LMC, and Halo Flattening

The Palomar~5 (Pal~5) globular cluster and its tidal tails provide a sensitive probe of globular-cluster evolution in the time-dependent Milky Way potential. We study the past 3~Gyr evolution of Pal~5 using collisional direct $N$-body simulations with \texttt{PeTar}, adopting Galactic potential models that include spiral arms, the Galactic bar, halo flattening, the Large Magellanic Cloud (LMC), and bar deceleration. We find that halo shape strongly influences the projected stream track, reflecting Pal~5's sensitivity to Galactic force-field flattening. The LMC causes only modest direct changes to the present-day projected stream morphology, but can alter the pericentric distance and hence the progenitor's mass evolution. The Galactic bar strongly affects stream length and debris redistribution along the tails, producing model-dependent density structures and leading--trailing asymmetries. Comparison with observations from Erkal et al. (2017) and Xiao et al. (2025) shows that no single model simultaneously reproduces all observed properties of Pal~5, including cluster evolution, stream length, track, width, and line-density profile. Although our simulations capture several global properties, the remaining discrepancies indicate that a more precise match likely requires better constraints on the initial properties of the Pal~5 progenitor and a more complex Galactic potential, including perturbations from small-scale perturbers such as dark matter subhalos and giant molecular clouds. Future work may combine self-consistent direct $N$-body simulations with particle-spray methods to investigate these discrepancies more efficiently.

astro-ph.GA↗

arXiv2026

SchwarMAX: a GPU-friendly Schwarzschild orbit-superposition modelling framework

The Schwarzschild orbit-superposition method is a highly flexible dynamical modelling tool. It constrains the mass distribution of a galaxy using line-of-sight velocity and photometric observations. However, constructing such a dynamical model of a galaxy is computationally expensive. We present SchwarMAX, a new publicly available GPU implementation of the Schwarzschild orbit-superposition method. The GPU-native code is significantly faster than other implementations, with entire model construction taking around a second on GPU A100. Using SchwarMAX, we can explore the distributions of both baryonic and dark matter in a galaxy across a high-dimensional parameter space. We demonstrate its performance using mock integrated-field spectroscopic unit data generated from an N-body simulated barred galaxy. We explore the 12-dimensional space of disc, bar and halo parameters using Markov Chain Monte Carlo. The density profiles and the bar pattern speed of the galaxy are recovered with good accuracy. We show that the code can be applied to barred galaxies across a wide range of inclination angles and can be easily extended to other stellar systems, such as elliptical and dwarf galaxies.

astro-ph.GA↗

arXiv2026

Self-interacting dark matter promotes bar formation in disk galaxies

Despite its remarkable success on large scales, the standard $Λ$CDM paradigm faces persistent small-scale challenges that have motivated alternative models for the dark sector. Self-interacting dark matter (SIDM) offers a compelling possibility, in which dark matter particles can scatter off each other. Stellar bars are a ubiquitous feature of disk galaxies across cosmic time. Bars are dynamically coupled to their host galaxy's dark matter halo, and therefore their properties provide a powerful probe of the nature and distribution of dark matter. In this paper, we use idealized, high-resolution $N$-body simulations and analytic calculations based on kinetic theory to study bar formation and evolution in disk galaxies embedded in SIDM halos. We find that compared with collisionless CDM, SIDM produces bars that form earlier and grow to larger amplitudes, even for modest self-interaction cross sections. In several cases, disks that remain stable in CDM, including kinematically hot and dark-matter-dominated disks, develop strong bars in SIDM. This accelerated bar growth occurs because self-interactions broaden the bar-halo resonances and enhance angular momentum transfer from the stellar disk to the halo. We explicitly show that this phenomenon is not related to core formation in SIDM halos. At late times, gravothermal core collapse can raise the central dark matter density enough to weaken or dissolve the bar. These results suggest that the abundance, strength, and redshift evolution of barred galaxies offer a promising observational route to constraining dark matter self-interactions, particularly in light of the growing sample of high-redshift bars revealed by JWST.

astro-ph.GA↗

arXiv2026

A New Torus Generator for AGAMA

Code is presented that computes and exploits orbital tori for any axisymmetric gravitational potential. The code is a development of the AGAMA software package for action-based galaxy modelling and can be downloaded as the AGAMAb code library. Although coded in C++, most of its functions can be accessed from Python. We add to the package functions that facilitate confronting models with data, which involve sky coordinates, lines of sight, distances, extinction, etc. The new torus generator can produce tori for both highly eccentric and nearly circular orbits that lie beyond the range of the earlier torus-mapping code. Tori can be created by interpolation between tori at very low cost. Tori are fundamentally devices for computing ordinary phase-space coordinates from angle-action coordinates, but AGAMAb includes an action finder that returns angle-action coordinates from any given phase-space location. This action finder yields the torus through the given point, so it includes the functionality of an orbit integrator. The action finder is more accurate and reliable but computationally more costly than the widely used Staeckel Fudge. We show how AGAMAb can be used to generate sophisticated but cheap models of tidal streams and use it to analyse data for the GD1 stream. With the most recently published distances to the stream, energy and angular momentum imply that the end that must be leading is trailing, but extremely small changes to the distances rectify the problem.

astro-ph.GA↗

arXiv2026

No Stream Left Unscathed: The imprint of a host galaxy

Stellar streams from disrupted globular clusters are excellent probes of dark matter (DM) subhalos. Observed Milky Way streams display a remarkable diversity of features: spurs, gaps, kinks, cocoons, and density variations, many attributed to subhalo encounters. But how much of this diversity arises from the host itself? We simulate $\sim$15,000 globular cluster streams across four Milky Way-mass halos from the FIRE-2 cosmological simulations, evolved in basis function expansion potentials capturing the evolving disk, halo, and large-scale structure while excluding small-scale perturbers such as DM subhalos and giant molecular clouds. We find that roughly three quarters of streams develop complex features from the host potential, such as spurs, kinks, and cocoon-like envelopes. Even the smoothest streams exhibit 10--25\% width variation along their track and host overdensities and gaps at scales of ${\sim}2^\circ$, squarely in the $1^\circ$--$5^\circ$ range predicted for subhalo-induced gaps. Pericentric distance is the primary predictor of stream morphology, with ${\sim}15$ kpc separating smooth from disturbed streams and circular orbits beyond $\sim$20 kpc producing the smoothest streams. Only $\sim$70 out of $\sim$15,000 streams are free of detectable wiggles in the track at any scale. Analogs to observed features, such as the GD-1 spur and the ATLAS--Aliqa Uma kink, emerge even without the presence of subhalos. As next-generation surveys (LSST, Euclid, and Roman) resolve stream structure across hundreds of streams, the baseline established here, streams evolved without small-scale perturbers, becomes essential for extracting DM substructure constraints.

astro-ph.GA↗

arXiv2026

Distribution function-based modelling of discrete kinematic datasets, in application to the Milky Way nuclear star cluster

We present a method for constructing dynamical models of stellar systems described by distribution functions and constrained by discrete-kinematic data. We implement various improvements compared to earlier applications of this approach, demonstrating with several examples that it can deliver meaningful constraints on the mass distribution even in situations when the density profile of tracers and the selection function of the kinematic catalogue are unknown. We then apply this method to the Milky Way nuclear star cluster, using kinematic data (line-of-sight velocities and proper motions) for a few thousand stars within 10 pc from the central black hole, accounting for the contributions of the nuclear stellar disc and the Galactic bar. We measure the mass of the black hole to be 4x10^6 Msun with a 10% uncertainty, which agrees with the more precise value obtained by the GRAVITY instrument. The inferred stellar mass profile depends on the choice of kinematic data, but the total mass within 10 pc is well constrained in all models to be (2.0-2.3)x10^7 Msun. We make our models publicly available as part of the Agama software framework for galactic dynamics.

astro-ph.GA↗

arXiv2026

Self-consistent modelling of the Milky Way's Nuclear Stellar Disc

The Nuclear Stellar Disc (NSD) is a flattened high-density stellar structure that dominates the gravitational field of the Milky Way at Galactocentric radius $30\lesssim R\lesssim 300$ pc. We construct axisymmetric self-consistent equilibrium dynamical models of the NSD in which the distribution function is an analytic function of the action variables. We fit the models to the normalised kinematic distributions (line-of-sight velocities + VIRAC2 proper motions) of stars in the NSD survey of Fritz et al., taking the foreground contamination due to the Galactic Bar explicitly into account using an $N$-body model. The posterior marginalised probability distributions give a total mass of $M_{\rm NSD} = 10.5^{+1.1}_{-1.0} \times10^8 \,{\rm M_\odot}$, roughly exponential radial and vertical scale-lengths of $R_{\rm disc} = 88.6^{+9.2}_{-6.9}$ pc and $H_{\rm disc}=28.4^{+5.5}_{-5.5}$ pc respectively, and a velocity dispersion $σ\simeq 70$ km/s that decreases with radius. We find that the assumption that the NSD is axisymmetric provides a good representation of the data. We quantify contamination from the Galactic Bar in the sample, which is substantial in most observed fields. Our models provide the full 6D (position+velocity) distribution function of the NSD, which can be used to generate predictions for future surveys. We make the models publicly available as part of the software package AGAMA.

astro-ph.GA↗

arXiv2025

How much can we learn from resolved stellar kinematics of galactic haloes using action-based dynamical models?

Dynamical models are used to study dark matter (DM) in galaxies, how galaxies assemble through mergers, and to test galaxy formation models. Despite its widespread use, there has been no systematic study quantifying how much information can be obtained from just two on-sky positions and line-of-sight velocities, which are typically available for nearby external galaxies. In this work, we introduce axisymmetric, action-based dynamical models that use the positions and velocities of stellar halo stars to jointly constrain the total mass distribution of galaxies and the underlying DM component, as well as the stellar halo phase-space distribution. We rigorously test the method using both idealised equilibrium galaxy mocks and cosmological hydrodynamical simulations from the Auriga suite, systematically assessing how its performance degrades as the available phase-space information is progressively reduced. We further examine the impact of galaxy inclination, modelling assumptions, and methodological systematics on the recovered mass profiles. A crucial development in this work is the improved marginalisation of the model likelihood over missing phase-space dimensions. Our models successfully recover the total and DM mass distributions, as well as the kinematic properties of the stellar tracers, within the derived confidence intervals. However, we find that with limited (3D or 4D) phase-space information, the flattening of the DM halo cannot be constrained with any degree of certainty. Nevertheless, the recovered mass profile is insensitive to the flattening. This finding is independently validated by Schwarzschild modelling tests.

astro-ph.GA↗

arXiv2025

A Supermassive Black Hole in a Diminutive Ultra-compact Dwarf Galaxy Discovered with JWST/NIRSpec+IFU

The integral-field unit mode of the Near-Infrared Spectrograph (NIRSpec+IFU) mounted on the James Webb Space Telescope has now enabled kinematic studies of smaller and less massive compact stellar systems in which to search for central massive black holes (BHs) than ever before. We present here the first such detection using NIRSpec+IFU in its highest resolution (R~2700) mode. We report a $3σ$ detection of a central black hole with mass ${\cal M}_{BH}=2.2\pm1.1\times10^6\,M_\odot$ in UCD736 orbiting within the Virgo galaxy cluster based on Schwarzschild's modeling of the 1D kinematic profile. The presence of such a massive BH strongly argues against a globular cluster origin of this UCD, and rather suggests a tidally stripped formation route from a former $\gtrsim10^9\,M_\odot$ dwarf galaxy host. Two other methods produce results consistent with Schwarzschild's modelling, but can only provide upper-limits on ${\cal M}_{BH}$. This represents the detection of a BH in the most compact ($r_h\approx15\,{\rm pc}$) stellar system to date, with a ${\cal M}_{BH}$ corresponding to ~9 percent of the system's stellar mass, roughly in line with previously reported UCD BH detections and comparable to the BH detected in the compact elliptical galaxy NGC4486B.

astro-ph.GA↗

arXiv2025

A Stellar Dynamical Mass for the Central Black Hole in MCG$-$06-30-15

We present the stellar dynamical mass of the central black hole in the nearby Seyfert galaxy MCG$-$06-30-15 using the Schwarzschild orbit-superposition method implemented in the open-source code FORSTAND. We obtained spatially resolved $K$-band nuclear stellar spectra for this galaxy with SINFONI on the VLT. We extracted the bulk stellar kinematics using Gauss$-$Hermite (GH) parameterization of the line-of-sight velocity distributions. A multicomponent surface brightness profile of the galaxy was determined from an $HST$ medium-band $V$ image. Our best-fit models indicate a black hole mass of $M_{BH}=(4.4\pm1.4) \times 10^7 M_{\odot}$ and a stellar mass-to-light ratio of $M/L$=($3.0\pm0.3$) $M_{\odot}$/$L_{\odot}$, within 1$σ$ confidence intervals. Our constraint on $M_{BH}$ agrees with an upper limit on the mass from stellar dynamics based on the Jeans Anisotropic Method, but is $\sim$10 times larger than the reported mass from reverberation mapping. However, our best-fit $M_{BH}$ may be systematically biased high due to the counter-rotating disk in the nucleus of MCG$-$06-30-15 and the inability of the GH parameterization to fully describe such a complicated set of stellar kinematics. In addition, a dynamical $M_{BH}$ value depends heavily on the assumed source distance, which is not yet accurately constrained for this galaxy. MCG$-$06-30-15 is only the fourth galaxy in which we can compare $M_{BH}$ from stellar dynamical modeling with that from reverberation mapping. A direct comparison of $M_{BH}$ allows us to identify and investigate the possible sources of bias associated with different mass measurement techniques, which may influence our understanding of black hole and galaxy coevolution across cosmological timescales.

astro-ph.GA↗

arXiv2025

A JWST View of the Overmassive Black Hole in NGC 4486B

We present a new stellar dynamical measurement of the supermassive black hole (SMBH) in the compact elliptical galaxy NGC 4486B, based on integral field spectroscopy with JWST/NIRSpec. The two-dimensional kinematic maps reveal a resolved double nucleus and a velocity dispersion peak offset from the photometric center. Utilizing two independent methods-Schwarzschild orbit-superposition and Jeans Anisotropic Modeling-we tightly constrain the black hole mass by fitting the full line-of-sight velocity distribution. Our axisymmetric Schwarzschild models yield a best-fit black hole mass of $M_{BH} = 3.6^{+0.7}_{-0.7} \times 10^8 \, M_{\odot}$, slightly lower but significantly more precise than previous estimates. However, since our models do not account for the non-equilibrium nature of the double nucleus, this value may represent a lower limit. Across all tested dynamical models, the inferred $M_{BH}/M_*$ ratio ranges from ~ 4-13%, providing robust evidence for an overmassive SMBH in NGC 4486B. Combined with the galaxy's location deep within the Virgo Cluster, our results support the interpretation that NGC 4486B is the tidally stripped remnant core of a formerly massive galaxy. As the JWST/NIRSpec field of view is insufficient to constrain the dark matter halo, we incorporate archival ground-based long-slit kinematics extending to 5 arcsec. While this provides some leverage on the dark matter content, the constraints remain relatively weak. We place only an upper limit on the dark matter fraction, with $M_{DM}/M_{*} < 0.5$ within 1 kpc-well beyond the effective radius. The inferred black hole mass remains unchanged with or without a dark matter halo.

astro-ph.GA↗

arXiv2025

Minimum-entropy constraints on galactic potentials

A tracer sample in a gravitational potential, starting from a generic initial condition, phase-mixes towards a stationary state. This evolution is accompanied by an entropy increase, and the final state is characterized by a distribution function (DF) that depends only on integrals of motion (Jeans' theorem). We present a method to constrain a gravitational potential assuming a stationary (phase mixed) sample by minimizing the entropy the sample would have if it were allowed to phase-mix in trial potentials. This method avoids modeling the DF, and is applicable to any sets of integrals. We provide expressions for the entropy of DFs depending on energy, $f(E)$, energy and angular momentum, $f(E,L)$, or three actions, $f(\vec{J})$, and investigate the bias and statistical uncertainties in their estimates. We show that the method correctly recovers the parameters for spherical and axisymmetric potentials. We also present a methodology to characterize the posterior probability distribution of the parameters with an Approximate Bayesian Computation, indicating a pathway for application to observational data. Using $10^4$ tracers with $10\% (20\%)$-uncertainties in the 6D coordinates, we recover the flattening parameter $q$ of an axisymmetric potential with $σ_q/q\sim 5\% (10\%)$. The python module for the entropy estimators, \texttt{tropygal}, is made publicly available.

astro-ph.GA↗

arXiv2025

Chemo-dynamics of the stellar component of the Sculptor dwarf galaxy II: dynamical properties and dark matter halo density

Dwarf galaxies satellite of the Milky Way are excellent laboratories for testing dark matter (DM) models and baryonic feedback implementation in simulations. The Sculptor 'classical' dwarf spheroidal galaxy, a system with two distinct stellar populations and high-quality data, offers a remarkable opportunity to study DM distributions in these galaxies. In this work, we infer the DM halo density distribution of Sculptor, applying a method based on spherically symmetric distribution functions depending on actions to fit the stellar structural and kinematic properties of Sculptor. The galaxy is represented via four components: two distinct stellar populations based on distribution functions, tracers within a fixed and dominant DM potential, plus the contribution of a third stellar component that accounts for possible sources of contamination. The model-data comparison accounts for the kinematics and metallicities of individual stars, allowing us to assign probabilities of membership to each star. The modeling is applied on the largest available set of spectroscopic data, which have not been previously analyzed with this objective. We find the DM distribution of Sculptor to have a logarithmic inner slope of 0.39+0.23-0.26 and a scale radius of 0.79+0.38-0.17 kpc at 1 sigma confidence level. Our results show that Sculptor DM density profile deviates from predictions of DM-only simulations at a 3 sigma level over a large range of radii. Our analysis suggests that the velocity distribution of Sculptor's two main stellar components is isotropic in the center and becomes radially anisotropic in the outskirts. Additionally, we provide predictions for the projected radial and tangential velocity dispersion profiles. We also present updated DM annihilation and decay J- and D-factors, finding J = 18.15+0.11-0.12 and D = 18.07+0.10-0.10 for an angular aperture of 0.5 degrees.

astro-ph.GA↗

arXiv2025

Dark Matter Particle Flux in a Dynamically Self-consistent Milky Way Model

We extend a recently developed dynamically self-consistent model of the Milky Way constrained by observations from the Gaia observatory to include a radially anisotropic component in the dark matter (DM) halo, which represents the debris from the accreted Gaia-Sausage-Enceladus (GSE) galaxy. In the new model, which we call a self-consistent Anisotropic Halo Model or scAHM, we derive distribution functions for DM velocity in heliocentric and geocentric reference frames. We compare them with the velocity distributions in the standard halo model (SHM) and another anisotropic model (SHM++). We compute predicted scattering rates in direct-detection experiments, for different target nuclei and DM particle masses. Seasonal dependencies of scattering rates are analyzed, revealing small but interesting variations in detection rates for different target nuclei and DM masses. Our findings show that the velocity distribution of the anisotropic GSE component significantly deviates from Gaussian, showing a modest impact on the detection rates. The peculiar kinematic signature of the radially anisotropic component would be most clearly observable by direction-sensitive detectors.

astro-ph.GA↗

arXiv2025

Milky Way dynamics in light of Gaia

The Gaia mission has triggered major developments in the field of Galactic dynamics in recent years, which we discuss in this review. The structure and kinematics of all Galactic components - disc, bar/bulge and halo - are now mapped in great detail not only in the Solar neighbourhood, but across a large part of the Milky Way. The dramatic improvements in the coverage and precision of observations revealed various disequilibrium processes, such as perturbations in the Galactic disc and the deformations of the outer halo, which are partly attributed to the interaction with satellite galaxies. The knowledge of the gravitational potential at all scales has also advanced considerably, but we are still far from having a consistent view on the key properties of the Galaxy, such as the bar pattern speed or the mass profile and shape of the dark halo. The complexity and interplay of several dynamical processes makes the interpretation of observational data challenging, and it is fair to say that more theoretical effort is needed to fully reap the fruit of the Gaia revolution.

astro-ph.GA↗

arXiv2024

Testing kinematic distances under a realistic Galactic potential

Obtaining reliable distance estimates to gas clouds within the Milky Way is challenging in the absence of certain tracers. The kinematic distance approach has been used as an alternative, derived from the assumption of circular trajectories around the Galactic centre. Consequently, significant errors are expected in regions where gas flow deviates from purely circular motions. We aim to quantify the systematic errors that arise from the kinematic distance method in the presence of a Galactic potential that is non-axisymmetric. We investigate how these errors differ in certain regions of the Galaxy and how they relate to the underlying dynamics. We perform 2D hydrodynamical simulation of the gas disk with the moving-mesh code Arepo, adding the capability of using an external potential provided by the Agama library for galactic dynamics. We introduce a new analytic potential of the Milky Way, taking elements from existing models and adjusting parameters to match recent observational constraints. In line with results of previous studies, we report significant errors in the kinematic distance estimate for gas close to the Sun, along sight lines towards the Galactic centre and anti-centre, and associated with the Galactic bar. Kinematic distance errors are low within the spiral arms as gas resides close to local potential minima and the resulting LOS velocity is similar to what is expected for an axisymmetric potential. Interarm regions exhibit large deviations at any given Galactic radius. This is caused by the gas being sped up or slowed down as it travels into or out of spiral arms. In addition, we identify 'zones of avoidance' in the lv-diagram, where the kinematic distance method is particularly unreliable and should only be used with caution, and we find a power law relation between the kinematic distance error and the deviation of the projected LOS velocity from circular motion.

astro-ph.GA↗

arXiv2024

Nexus: A framework for conrolled simulations of idealised galaxies

Motivated by the need for realistic, dynamically self-consistent, evolving galaxy models that avoid the complexity of full, and zoom-in, cosmological simulations, we have developed NEXUS, an integral framework to create and evolve synthetic galaxies made of collisionless and gaseous components. NEXUS leverages the power of publicly available, tried-and-tested packages: the stellar-dynamics, action-based library AGAMA; and the adaptive mesh refinement, N-body/hydrodynamical code RAMSES, modified to meet our needs. In addition, we make use of a proprietary module to account for galaxy formation physics, including gas cooling and heating, star formation, stellar feedback, and chemical enrichment. NEXUS' basic functionality consists in the generation of bespoke initial conditions (ICs) for a diversity of galaxy models, which are advanced in time to simulate the galaxy's evolution. The fully self-consistent ICs are generated with a distribution-function based approach, as implemented in the galaxy modelling module of AGAMA -- up to now restricted to collisionless components, extended in this work to treat two types of gaseous configurations: hot halos and gas discs. NEXUS allows constructing equilibrium models with disc gas fractions $0~\leq~f_{\rm gas}~\leq~1$, appropriate to model both low- and high-redshift galaxies. Similarly, the framework is ideally suited to the study of galactic ecology, i.e. the dynamical interplay between stars and gas over billions of years. As a validation and illustration of our framework, we reproduce several isolated galaxy model setups reported in earlier studies, and present a new, `nested bar' galaxy simulation. Future upgrades of NEXUS will include magneto-hydrodynamics and highly energetic particle (`cosmic ray') heating.

astro-ph.GA↗

arXiv2024

The Lower Limit of Dynamical Black Hole Masses Detectable in Virgo Compact Stellar Systems Using the JWST/NIRSpec IFU

Due to observational challenges, the mass function of black holes (BH) at lower masses is poorly constrained in the local universe. Understanding the occupation fraction of BHs in low-mass galaxies is crucial for constraining the origins of supermassive BH seeds. Compact stellar systems (CSSs), including ultra-compact dwarf galaxies (UCDs) and compact elliptical galaxies (cEs), are potential intermediate-mass BH hosts. Despite the difficulties posed by their limited spheres of influence, stellar dynamical modeling has been effective in estimating central BH masses in CSSs. Some CSSs may harbor a BH constituting up to 20% of their host stellar mass, while others might not have a central BH. In support of our ongoing efforts to determine the BH masses in select CSSs in the Virgo cluster using JWST/NIRSpec IFU observations and orbit-superposition dynamical models, we create mock kinematic data mimicking the characteristics of observed cEs/UCDs in the Virgo cluster with different BH masses. We then construct a series of dynamical models using the orbit-superposition code FORSTAND and explore the accuracy of recovering the BH mass. We find that the mass of BHs comprising 1% or more of the total host stellar mass can be accurately determined through kinematic maps featuring higher-order velocity moments. We also assess how BH mass measurement is affected by deprojection methods, regularization factors, anisotropy parameters, orbit initial conditions, the absence of higher-order velocity moments, spatial resolution, and the signal-to-noise ratio.

astro-ph.GA↗