Searcharxiv⌕ Search

arXiv subjects

Eve C. Ostriker

Publications and source records attributed to Eve C. Ostriker.

At least 127 records · Page 7Linked to original sources

Three Dimensional Hydrodynamic Simulations of Multiphase Galactic Disks with Star Formation Feedback: II. Synthetic HI 21 cm Line Observations

We use three-dimensional numerical hydrodynamic simulations of the turbulent, multiphase atomic interstellar medium (ISM) to construct and analyze synthetic HI 21 cm emission and absorption lines. Our analysis provides detailed tests of 21 cm observables as physical diagnostics of the atomic ISM. In particular, we construct (1) the "observed" spin temperature, $T_{s,obs}(v_{ch})\equiv T_B(v_{ch})/[1-e^{-τ(v_{ch})}]$, and its optical-depth weighted mean T_s,obs; (2) the absorption-corrected "observed" column density, $N_{H,obs}\propto \int dv_{ch} T_B(v_{ch})τ(v_{ch})/[[1-e^{-τ(v_{ch})}]$; and (3) the "observed" fraction of cold neutral medium (CNM), $f_{c,obs}\equiv T_c/T_{s,obs}$ for T_c the CNM temperature; we compare each observed parameter with true values obtained from line-of-sight (LOS) averages in the simulation. Within individual velocity channels, T_s,obs(v_ch) is within a factor 1.5 of the true value up to $τ(v_{ch})\approx10$. As a consequence, N_H,obs and T_s,obs are respectively within 5% and 12% of the true values for 90% and 99% of LOSs. The optically thin approximation significantly underestimates N_H for $τ>1$. Provided that T_c is constrained, an accurate observational estimate of the CNM mass fraction can be obtained down to 20%. We show that T_s,obs cannot be used to distinguish the relative proportions of warm and thermally-unstable atomic gas, although the presence of thermally-unstable gas can be discerned from 21 cm lines with 200K<$T_{s,obs}(v_{ch})$<1000K. Our mock observations successfully reproduce and explain the observed distribution of the brightness temperature, optical depth, and spin temperature in Roy et al. (2013a). The threshold column density for CNM seen in observations is also reproduced by our mock observations. We explain this observed threshold behavior in terms of vertical equilibrium in the local Milky Way's ISM disk.

astro-ph.GA↗

Formation of Magnetized Prestellar Cores with Ambipolar Diffusion and Turbulence

We investigate the roles of magnetic fields and ambipolar diffusion during prestellar core formation in turbulent giant molecular clouds (GMCs), using three-dimensional numerical simulations. Our simulations focus on the shocked layer produced by a converging flow within a GMC, and survey varying ionization and angle between the upstream flow and magnetic field. We also include ideal magnetohydrodynamic (MHD) and hydrodynamic models. From our simulations, we identify hundreds of self-gravitating cores that form within 1 Myr, with masses M ~ 0.04 - 2.5 solar-mass and sizes L ~ 0.015 - 0.07 pc, consistent with observations of the peak of the core mass function (CMF). Median values are M = 0.47 solar-mass and L = 0.03 pc. Core masses and sizes do not depend on either the ionization or upstream magnetic field direction. In contrast, the mass-to-magnetic flux ratio does increase with lower ionization, from twice to four times the critical value. The higher mass-to-flux ratio for low ionization is the result of enhanced transient ambipolar diffusion when the shocked layer first forms. However, ambipolar diffusion is not necessary to form low-mass supercritical cores. For ideal MHD, we find similar masses to other cases. These masses are 1 - 2 orders of magnitude lower than the value that defines a magnetically supercritical sphere under post-shock ambient conditions. This discrepancy is the result of anisotropic contraction along field lines, which is clearly evident in both ideal MHD and diffusive simulations. We interpret our numerical findings using a simple scaling argument which suggests that gravitationally critical core masses will depend on the sound speed and mean turbulent pressure in a cloud, regardless of magnetic effects.

astro-ph.SR↗

Formation of Molecular Clouds and Global Conditions for Star Formation

Giant molecular clouds (GMCs) are the primary reservoirs of cold, star-forming molecular gas in the Milky Way and similar galaxies, and thus any understanding of star formation must encompass a model for GMC formation, evolution, and destruction. These models are necessarily constrained by measurements of interstellar molecular and atomic gas, and the emergent, newborn stars. Both observations and theory have undergone great advances in recent years, the latter driven largely by improved numerical simulations, and the former by the advent of large-scale surveys with new telescopes and instruments. This chapter offers a thorough review of the current state of the field.

astro-ph.GA↗

Three Dimensional Hydrodynamic Simulations of Multiphase Galactic Disks with Star Formation Feedback: I. Regulation of Star Formation Rates

The energy and momentum feedback from young stars has a profound impact on the interstellar medium (ISM), including heating and driving turbulence in the neutral gas that fuels future star formation. Recent theory has argued that this leads to a quasi-equilibrium self-regulated state, and for outer atomic-dominated disks results in the surface density of star formation $Σ_{SFR}$ varying approximately linearly with the weight of the ISM (or midplane turbulent + thermal pressure). We use three-dimensional numerical hydrodynamic simulations to test the theoretical predictions for thermal, turbulent, and vertical dynamical equilibrium, and the implied functional dependence of $Σ_{SFR}$ on local disk properties. Our models demonstrate that all equilibria are established rapidly, and that the expected proportionalities between mean thermal and turbulent pressures and $Σ_{SFR}$ apply. For outer disk regions, this results in $Σ_{SFR} \propto Σ\sqrt{ρ_{sd}}$, where $Σ$ is the total gas surface density and $ρ_{sd}$ is the midplane density of the stellar disk (plus dark matter). This scaling law arises because $ρ_{sd}$ sets the vertical dynamical time in our models (and outer disk regions generally). The coefficient in the star formation law varies inversely with the specific energy and momentum yield from massive stars. We find proportions of warm and cold atomic gas, turbulent-to-thermal pressure, and mean velocity dispersions that are consistent with Solar-neighborhood and other outer-disk observations. This study confirms the conclusions of a previous set of simulations, which incorporated the same physics treatment but was restricted to radial-vertical slices through the ISM.

astro-ph.GA↗

The Starburst-Driven Molecular Wind in NGC 253 and the Suppression of Star Formation

The under-abundance of very massive galaxies in the universe is frequently attributed to the effect of galactic winds. Although ionized galactic winds are readily observable most of the expelled mass is likely in cooler atomic and molecular phases. Expanding molecular shells observed in starburst systems such as NGC 253 and M 82 may facilitate the entrainment of molecular gas in the wind. While shell properties are well constrained, determining the amount of outflowing gas emerging from such shells and the connection between this gas and the ionized wind requires spatial resolution <100 pc coupled with sensitivity to a wide range of spatial scales, hitherto not available. Here we report observations of NGC 253, a nearby starburst galaxy (D~3.4 Mpc) known to possess a wind, which trace the cool molecular wind at 50 pc resolution. At this resolution the extraplanar molecular gas closely tracks the Hα filaments, and it appears connected to molecular expanding shells located in the starburst region. These observations allow us to directly measure the molecular outflow rate to be > 3 Msun/yr and likely ~9 Msun/yr. This implies a ratio of mass-outflow rate to star formation rate of at least η~1-3, establishing the importance of the starburst-driven wind in limiting the star formation activity and the final stellar content.

astro-ph.CO↗

A Two-moment Radiation Hydrodynamics Module in Athena Using a Time-explicit Godunov Method

We describe a module for the Athena code that solves the gray equations of radiation hydrodynamics (RHD), based on the first two moments of the radiative transfer equation. We use a combination of explicit Godunov methods to advance the gas and radiation variables including the non-stiff source terms, and a local implicit method to integrate the stiff source terms. We adopt the M1 closure relation and include all leading source terms. We employ the reduced speed of light approximation (RSLA) with subcycling of the radiation variables in order to reduce computational costs. Our code is dimensionally unsplit in one, two, and three space dimensions and is parallelized using MPI. The streaming and diffusion limits are well-described by the M1 closure model, and our implementation shows excellent behavior for a problem with a concentrated radiation source containing both regimes simultaneously. Our operator-split method is ideally suited for problems with a slowly varying radiation field and dynamical gas flows, in which the effect of the RSLA is minimal. We present an analysis of the dispersion relation of RHD linear waves highlighting the conditions of applicability for the RSLA. To demonstrate the accuracy of our method, we utilize a suite of radiation and RHD tests covering a broad range of regimes, including RHD waves, shocks, and equilibria, which show second-order convergence in most cases. As an application, we investigate radiation-driven ejection of a dusty, optically thick shell in the interstellar medium (ISM). Finally, we compare the timing of our method with other well-known iterative schemes for the RHD equations. Our code implementation, Hyperion, is suitable for a wide variety of astrophysical applications and will be made freely available on the Web.

astro-ph.IM↗

Implementation of Sink Particles in the Athena Code

We describe implementation and tests of sink particle algorithms in the Eulerian grid-based code Athena. Introduction of sink particles enables long-term evolution of systems in which localized collapse occurs, and it is impractical (or unnecessary) to resolve the accretion shocks at the centers of collapsing regions. We discuss similarities and differences of our methods compared to other implementations of sink particles. Our criteria for sink creation are motivated by the properties of the Larson-Penston collapse solution. We use standard particle-mesh methods to compute particle and gas gravity together. Accretion of mass and momenta onto sinks is computed using fluxes returned by the Riemann solver. A series of tests based on previous analytic and numerical collapse solutions is used to validate our method and implementation. We demonstrate use of our code for applications with a simulation of planar converging supersonic turbulent flow, in which multiple cores form and collapse to create sinks; these sinks continue to interact and accrete from their surroundings over several Myr.

astro-ph.IM↗

Numerical Modeling of Multiphase, Turbulent Galactic Disks with Star Formation Feedback

Star formation is self-regulated by its feedback that drives turbulence and heats the gas. In equilibrium, the star formation rate (SFR) should be directly related to the total (thermal plus turbulent) midplane pressure and hence the total weight of the diffuse gas if energy balance and vertical dynamical equilibrium hold simultaneously. To investigate this quantitatively, we utilize numerical hydrodynamic simulations focused on outer-disk regions where diffuse atomic gas dominates. By analyzing gas properties at saturation, we obtain relationships between the turbulence driving and dissipation rates, heating and cooling rates, the total midplane pressure and the total weight of gas, and the SFR and the total midplane pressure. We find a nearly linear relationship between the SFR and the midplane pressure consistent with the theoretical prediction.

astro-ph.GA↗

Maximally Star-Forming Galactic Disks II. Vertically-Resolved Hydrodynamic Simulations of Starburst Regulation

We explore the self-regulation of star formation using a large suite of high resolution hydrodynamic simulations, focusing on molecule-dominated regions (galactic centers and [U]LIRGS) where feedback from star formation drives highly supersonic turbulence. In equilibrium the total midplane pressure, dominated by turbulence, must balance the vertical weight of the ISM. Under self-regulation, the momentum flux injected by feedback evolves until it matches the vertical weight. We test this flux balance in simulations spanning a range of parameters, including surface density $Σ$, momentum injected per stellar mass formed ($p_*/m_*$), and angular velocity. The simulations are 2D radial-vertical slices, including both self-gravity and an external potential that confines gas to the disk midplane. After the simulations reach a steady state in all relevant quantities, including the star formation rate $Σ_{SFR}$, there is remarkably good agreement between the vertical weight, the turbulent pressure, and the momentum injection rate from supernovae. Gas velocity dispersions and disk thicknesses increase with $p_*/m_*$. The efficiency of star formation per free-fall time at the mid-plane density is insensitive to the local conditions and to the star formation prescription in very dense gas. We measure efficiencies $\sim$0.004-0.01, consistent with low and approximately constant efficiencies inferred from observations. For $Σ\in$(100--1000) \msunpc, we find $Σ_{SFR}\in$(0.1--4) \sfrunits, generally following a $Σ_{SFR}\propto Σ^2$ relationship. The measured relationships agree very well with vertical equilibrium and with turbulent energy replenishment by feedback within a vertical crossing time. These results, along with the observed $Σ_{SFR}-Σ$ relation in high density environments, provide strong evidence for the self-regulation of star formation.

astro-ph.CO↗

A General Model for the CO-H2 Conversion Factor in Galaxies with Applications to the Star Formation Law

The most common means of converting an observed CO line intensity into a molecular gas mass requires the use of a conversion factor (Xco). While in the Milky Way this quantity does not appear to vary significantly, there is good reason to believe that Xco will depend on the larger-scale galactic environment. Utilising numerical models, we investigate how varying metallicities, gas temperatures and velocity dispersions in galaxies impact the way CO line emission traces the underlying H2 gas mass, and under what circumstances Xco may differ from the Galactic mean value. We find that, due to the combined effects of increased gas temperature and velocity dispersion, Xco is depressed below the Galactic mean in high surface density environments such as ULIRGs. In contrast, in low metallicity environments, Xco tends to be higher than in the Milky Way, due to photodissociation of CO in metal-poor clouds. At higher redshifts, gas-rich discs may have gravitationally unstable clumps which are warm (due to increased star formation) and have elevated velocity dispersions. These discs tend to have Xco values ranging between present-epoch gas-rich mergers and quiescent discs at low-z. This model shows that on average, mergers do have lower Xco values than disc galaxies, though there is significant overlap. Xco varies smoothly with the local conditions within a galaxy, and is not a function of global galaxy morphology. We combine our results to provide a general fitting formula for Xco as a function of CO line intensity and metallicity. We show that replacing the traditional approach of using one constant Xco for starbursts and another for discs with our best-fit function produces star formation laws that are continuous rather than bimodal, and that have significantly reduced scatter.

astro-ph.GA↗

Ambipolar Diffusion in Action: Transient C shock Structure and Prestellar Core Formation

We analyze the properties of steady and time-dependent C shocks under conditions prevailing in giant molecular clouds. For steady C shocks, we show that ionization equilibrium holds and use numerical integrations to obtain the shock thickness mediated by ambipolar diffusion as a function of density, inflow velocity, magnetic field, and ionization fraction in the cloud. Our formula also agrees with an analytic estimate based on ion-neutral momentum exchange. Using time-dependent numerical simulations, we show that C shocks have a transient stage when the neutrals are compressed much more strongly than the magnetic field. The transient stage has a duration set by the neutral-ion collision time, t_AD ~ L_shock/v_drift ~ 0.1 - 1 Myr. This transient creates a strong enhancement in the mass-to-magnetic flux ratio. Under favorable conditions, supercritical prestellar cores may form and collapse promptly as a result of magnetic flux loss during the transient stage of C shocks.

astro-ph.SR↗

Regulation of Star Formation Rates in Multiphase Galactic Disks: Numerical Tests of the Thermal/Dynamical Equilibrium Model

We use vertically-resolved numerical hydrodynamic simulations to study star formation and the interstellar medium (ISM) in galactic disks. We focus on outer disk regions where diffuse HI dominates, with gas surface densities Sigma_SFR=3-20 Msun/kpc^2/yr and star-plus-dark matter volume densities rho_sd=0.003-0.5 Msun/pc^3. Star formation occurs in very dense, cold, self-gravitating clouds. Turbulence, driven by momentum feedback from supernova events, destroys bound clouds and puffs up the disk vertically. Time-dependent radiative heating (FUV) offsets gas cooling. We use our simulations to test a new theory for self-regulated star formation. Consistent with this theory, the disks evolve to a state of vertical dynamical equilibrium and thermal equilibrium with both warm and cold phases. The range of star formation surface densities and midplane thermal pressures is Sigma_SFR ~ 0.0001 - 0.01 Msun/kpc^2/yr and P_th/k_B ~ 100 -10000 cm^-3 K. In agreement with observations, turbulent velocity dispersions are ~7 km/s and the ratio of the total (effective) to thermal pressure is P_tot/P_th~4-5, across this whole range. We show that Sigma_SFR is not well correlated with Sigma alone, but rather with Sigma*(rho_sd)^1/2, because the vertical gravity from stars and dark matter dominates in outer disks. We also find that Sigma_SFR has a strong, nearly linear correlation with P_tot, which itself is within ~13% of the dynamical-equilibrium estimate P_tot,DE. The quantitative relationships we find between Sigma_SFR and the turbulent and thermal pressures show that star formation is highly efficient for energy and momentum production, in contrast to the low efficiency of mass consumption. Star formation rates adjust until the ISM's energy and momentum losses are replenished by feedback within a dynamical time.

astro-ph.GA↗

The CO-H2 Conversion Factor in Disc Galaxies and Mergers

Relating the observed CO emission from giant molecular clouds (GMCs) to the underlying H2 column density is a long-standing problem in astrophysics. While the Galactic CO-H2 conversion factor (Xco) appears to be reasonably constant, observations indicate that Xco may be depressed in high-surface density starburst environments. Using a multi-scale approach, we investigate the dependence of Xco on the galactic environment in numerical simulations of disc galaxies and galaxy mergers. Xco is proportional to the GMC surface density divided by the integrated CO intensity, Wco, and Wco is related to the kinetic temperature and velocity dispersion in the cloud. In disc galaxies (except within the central ~ kpc), the galactic environment is largely unimportant in setting the physical properties of GMCs provided they are gravitationally bound. The temperatures are roughly constant at ~10 K due to the balance of CO cooling and cosmic ray heating, giving a nearly constant CO-H2 conversion factor in discs. In mergers, the velocity dispersion of the gas rises dramatically during coalescence. The gas temperature also rises as it couples well to the warm (~50 K) dust at high densities (n > 10^4 cm^-3). The rise in velocity dispersion and temperature combine to offset the rise in surface density in mergers, causing Xco to drop by a factor of ~2-10 compared to the disc simulation. This model predicts that high-resolution ALMA observations of nearby ULIRGs should show velocity dispersions of ~10-100 km/s, and brightness temperatures comparable to the dust temperatures.

astro-ph.CO↗

Modeling CO Emission: II. The Physical Characteristics that Determine the X factor in Galactic Molecular Clouds

We investigate how the X factor, the ratio of H_2 column density (NH2) to velocity-integrated CO intensity (W), is determined by the physical properties of gas in model molecular clouds (MCs). We perform radiative transfer calculations on chemical-MHD models to compute X. Using integrated NH2 and W reproduces the limited range in X found in observations, resulting in a mean value X=2\times10^20 s/cm^2/K^1/km^1 from the Galactic MC model. However, in limited velocity intervals, X can take on a much larger range due to CO line saturation. Thus, X strongly depends on both the range in gas velocities and volume densities. The temperature (T) variations within individual MCs do not strongly affect X, as dense gas contributes most to setting X. For fixed velocity and density structure, gas with higher T has higher W, yielding X ~ T^-1/2 for T~20-100 K. We demonstrate that the linewidth-size scaling relation does not influence the X factor - only the range in velocities is important. Clouds with larger linewidths, regardless of the linewidth-size relation, have a higher W, corresponding to a lower value of X, scaling roughly as X ~ sigma^-1/2. The "mist" model, consisting of optically thick cloudlets with well-separated velocities, does not accurately reflect the conditions in a turbulent MC. We propose that the observed cloud-average values of X ~ XGal is simply a result of the limited range in NH2, temperatures, and velocities found in Galactic MCs - a ~constant value of X therefore does not require any linewidth-size relation, or that MCs are virialized objects. Since gas properties likely differ (slightly) between clouds, masses derived through a standard X should only be considered as a rough first estimate. For temperatures T~10-20 K, velocity dispersions ~1-6 km/s, and NH2~2-20\times10^21 cm^-2, we find cloud-averaged X ~ 2-4\times10^20 s/cm^2/K^1/km^1 for Solar-metallicity models.

astro-ph.GA↗

Maximally Star-Forming Galactic Disks I. Starburst Regulation Via Feedback-Driven Turbulence

Star formation rates in the centers of disk galaxies often vastly exceed those at larger radii. We investigate the idea that these central starbursts are self-regulated, with the momentum flux injected to the ISM by star formation balancing the gravitational force confining the gas. For most starbursts, supernovae are the largest contributor to the momentum flux, and turbulence provides the main pressure support for the predominantly-molecular ISM. If the momentum feedback per stellar mass formed is p_*/m_* ~ 3000 km/s, the predicted star formation rate is Sigma_SFR=2 pi G Sigma^2 m_*/p_* ~0.1(Sigma/100Msun/pc^2)^2 Msun/kpc^2/yr in regions where gas dominates the vertical gravity. We compare this prediction with numerical simulations of vertically-resolved disks that model star formation including feedback, finding good agreement for gas surface densities Sigma ~ 10^2-10^3 Msun/pc^2. We also compare to a compilation of star formation rates and gas contents from local and high-redshift galaxies (both mergers and normal galaxies), finding good agreement provided that X_CO decreases weakly as Sigma and Sigma_SFR increase. Star formation rates in dense, turbulent gas are also expected to depend on the gravitational free-fall time; if the efficiency per free-fall time is epsilon_ff ~ 0.01, the turbulent velocity dispersion driven by feedback is expected to be v_z = 0.4 epsilon_ff p_*/m_* ~ 10 km/s, relatively independent of Sigma or Sigma_SFR. Turbulence-regulated starbursts (controlled by kinetic momentum feedback) are part of the larger scheme of self-regulation; primarily-atomic low-Sigma outer disks may have star formation regulated by UV heating feedback, whereas regions at extremely high Sigma may be regulated by feedback of radiation that is reprocessed into trapped IR.

astro-ph.CO↗

Dense core formation in supersonic turbulent converging flows

We use numerical hydrodynamic simulations to investigate prestellar core formation in the dynamic environment of giant molecular clouds, focusing on planar post-shock layers produced by colliding turbulent flows. A key goal is to test how core evolution and properties depend on the velocity dispersion in the parent cloud; our simulation suite consists of 180 models with inflow Mach numbers Ma=v/c_s=1.1-9. At all Mach numbers, our models show that turbulence and self-gravity collect gas within post-shock regions into filaments at the same time as overdense areas within these filaments condense into cores. This morphology, together with the subsonic velocities we find inside cores, is similar to observations. We extend previous results showing that core collapse develops in an ``outside-in'' manner, with density and velocity approaching the Larson-Penston asymptotic solution. The time for the first core to collapse varies as 1/sqrt(v), consistent with analytic estimates. Core building takes 10 times as long as core collapse, consistent with observed prestellar core lifetimes. Core shapes change from oblate to prolate as they evolve. To define cores, we use isosurfaces of the gravitational potential. We compare to cores defined using the potential computed from projected surface density, finding good agreement for core masses and sizes; this offers a new way to identify cores in observed maps. Cores with masses varying by three orders of magnitude (0.05 - 50 M_sun) are identified in our simulations. Stability analysis of post-shock layers predicts that the first core to collapse will have mass M \propto v^-1/2, and that the minimum mass for cores formed at late times will have M\propto v^-1. From our simulations, the median mass lies between these two relations.

astro-ph.SR↗

Star Formation and Gas Dynamics in Galactic Disks: Physical Processes and Numerical Models

Star formation depends on the available gaseous "fuel" as well as galactic environment, with higher specific star formation rates where gas is predominantly molecular and where stellar (and dark matter) densities are higher. The partition of gas into different thermal components must itself depend on the star formation rate, since a steady state distribution requires a balance between heating (largely from stellar UV for the atomic component) and cooling. In this presentation, I discuss a simple thermal and dynamical equilibrium model for the star formation rate in disk galaxies, where the basic inputs are the total surface density of gas and the volume density of stars and dark matter, averaged over ~kpc scales. Galactic environment is important because the vertical gravity of the stars and dark matter compress gas toward the midplane, helping to establish the pressure, and hence the cooling rate. In equilibrium, the star formation rate must evolve until the gas heating rate is high enough to balance this cooling rate and maintain the pressure imposed by the local gravitational field. In addition to discussing the formulation of this equilibrium model, I review the current status of numerical simulations of multiphase disks, focusing on measurements of quantities that characterize the mean properties of the diffuse ISM. Based on simulations, turbulence levels in the diffuse ISM appear relatively insensitive to local disk conditions and energetic driving rates, consistent with observations. It remains to be determined, both from observations and simulations, how mass exchange processes control the ratio of cold-to-warm gas in the atomic ISM.

astro-ph.CO↗

Regulation of Star Formation Rates in Multiphase Galactic Disks: a Thermal/Dynamical Equilibrium Model

We develop a model for regulation of galactic star formation rates Sigma_SFR in disk galaxies, in which ISM heating by stellar UV plays a key role. By requiring simultaneous thermal and (vertical) dynamical equilibrium in the diffuse gas, and star formation at a rate proportional to the mass of the self-gravitating component, we obtain a prediction for Sigma_SFR as a function of the total gaseous surface density Sigma and the density of stars + dark matter, rho_sd. The physical basis of this relationship is that thermal pressure in the diffuse ISM, which is proportional to the UV heating rate and therefore to Sigma_SFR, must adjust to match the midplane pressure set by the vertical gravitational field. Our model applies to regions where Sigma < 100 Msun/pc^2. In low-Sigma_SFR (outer-galaxy) regions where diffuse gas dominates, the theory predicts Sigma_SFR \propto Sigma (rho_sd)^1/2. The decrease of thermal equilibrium pressure when Sigma_SFR is low implies, consistent with observations, that star formation can extend (with declining efficiency) to large radii in galaxies, rather than having a sharp cutoff. The main parameters entering our model are the ratio of thermal pressure to total pressure in the diffuse ISM, the fraction of diffuse gas that is in the warm phase, and the star formation timescale in self-gravitating clouds; all of these are (in principle) direct observables. At low surface density, our model depends on the ratio of the mean midplane FUV intensity (or thermal pressure in the diffuse gas) to the star formation rate, which we set based on Solar neighborhood values. We compare our results to recent observations, showing good agreement overall for azimuthally-averaged data in a set of spiral galaxies. For the large flocculent spiral galaxies NGC 7331 and NGC 5055, the correspondence between theory and observation is remarkably close.

astro-ph.CO↗