Evgenii Novoselov | Searcharxiv

arXiv2020

IR- and visible- light single photon detection in superconducting $MgB_{2}$ nanowires

State-of-the-art Superconducting Nanowire Single Photon Detectors based on low-Tc materials reach 100% quantum efficiency. However, the response time is limited to >1-10 ns. Recently, it has been shown that due to a much lower kinetic inductance, a 100 ps response rate can be achieved in 120 $μ$m-long $MgB_{2}$ nanowires. In this work, we demonstrate experimentally that such $MgB_{2}$ nanowires function as single-photon detectors for both visible ($λ$= 630 nm) and infrared ($λ$= 1550 nm) photons when biased close to the critical current, with a dark count rate of <10 cps. $MgB_{2}$ photodetectors over-perform NbN SNSPDs in speed by at least an order of magnitude for similar nanowire lengths. Such photodetectors offer a platform for single-photon detectors with a long thought-after combination of a large detector area and a response rate of up to 10 GHz with a single readout line.

physics.app-ph↗

arXiv2020

Low kinetic inductance superconducting $MgB_{2}$ nanowire photon detectors with a 100 picosecond relaxation time

Properties of superconducting nanowires set the performance level for Superconducting Nanowire Single Photon Detectors (SNSPD). Reset time in commonly employed large area SNSPDs,5-10ns,is known to be limited by the nanowires kinetic inductance.On the other hand, reduction of the kinetic inductance in small area (waveguide integrated) SNSPDs prevents biasing them close to the critical current due to latching into a permanent resistive state.In order to reduce the reset time in SNSPDs, superconducting nanowires with both low kinetic inductance and fast electron energy relaxation are required. In this paper, we report on narrow (15-100nm) and long (up to 120 $μ$m) superconducting $MgB_{2}$ nanowires offering such combination of properties.In 5 nm-thick $MgB_{2}$ films, grown using Hybrid Physical Chemical Vapor Deposition, the electron relaxation time was 12ps, the critical temperature was 32K, and the critical current density was 5x$10^{7}$ A/$cm^{2}$ (at 4.8K). Using microwave reflectometry, we measured a kinetic inductance of Lk0(4.8K)=1.3-1.6 pH/sqr regardless of the nanowire width, which results in a magnetic field penetration depth of 90 nm. These values are very close to those in pristine $MgB_{2}$. For 120 $μ$m long nanowires the response time was only 100ps, i.e. 1/80 of that in previously reported NbN nanowire photon detectors of similar dimensions.

cond-mat.supr-con↗