arXiv subjects

Ewan Douglas

Publications and source records attributed to Ewan Douglas.

17 recordsLinked to original sources

arXiv2026

Upgrading LBTI/NOMIC with a quadruple annular groove phase mask and GeoSnap detector for imaging nearby, habitable-zone exoplanets

The Large Binocular Telescope Interferometer (LBTI)'s Nulling-Optimized Mid-Infrared Camera (NOMIC) is among the most capable thermal-infrared imaging systems available for high-contrast, high-angular-resolution astronomical observations. Here we describe two in-progress upgrades to LBTI/NOMIC: (1) the design, fabrication, and installation of a quadruple annular groove phase mask (Q-AGPM) coronagraph, and (2) the installation of a 13 micron-cutoff Teledyne GeoSnap array. The Q-AGPM is the first coronagraph to be installed within NOMIC and one of the first optimized for N-band (~11 micron) observations. It places four annular groove phase masks on a single diamond substrate so that, in the LBTI dual-aperture imaging mode, each of the two telescope beams can be chopped between a pair of masks without loss of observing efficiency. The GeoSnap array will replace NOMIC's original AQUARIUS array, delivering higher quantum efficiency, larger well depth, faster and more linear readout, and freedom from the excess low-frequency noise that requires aggressive chopping. Together these upgrades substantially improve the achievable contrast and sensitivity at small angular separations. We also present a high-contrast Fizeau imaging sequence obtained with LBTI's new FFTCam fringe tracker, which confirms the interferometric gain over a single aperture through injection/recovery tests: relative to an equal-time single aperture exposure, the S/N = 3 contrast is a factor of ~2-4 deeper across 0.2-1 arcsec, spanning the contrast- and background-limited regimes. Finally, we describe the role of the upgraded LBTI/NOMIC instrument within the Breakthrough Watch program at the University of Arizona, which aims to perform the deepest observations yet of the habitable zones of the nearest single Sun-like stars.

astro-ph.IM↗

arXiv2026

Design and modeling of an oblique incidence dichroic mirror for a high contrast imaging system

The proposed Habitable Worlds Observatory (HWO) aims to detect and characterize Earth-like planets around Sun-like stars from the ultraviolet to the infrared using high-contrast imaging. A dichroic mirror is a natural choice for splitting light between multiple wavelength channels in such a system, but the coating must introduce minimal polarization aberrations and chromatic wavefront errors (WFE) to avoid limiting contrast. We present the design of a long-pass dichroic mirror operated at a $7^\circ$ angle of incidence that provides high reflection in the short-wavelength band, high transmission in the long-wavelength band, and a sharp cut-on near 550~nm. A multilayer thin-film design process was used to meet these spectral requirements while reducing polarization aberrations and chromatic WFE sensitivity. Reflected phase optimization was also incorporated to reduce sensitivity to manufacturing-induced layer-thickness variations, which can produce wavelength-dependent WFE and degrade coronagraph performance. The resulting coating-induced WFE was propagated through simulations of a vector vortex coronagraph to assess contrast performance. Simulations predict dark-hole contrast residuals at the $10^{-12}$ level, indicating that the optimized dichroic mirror does not limit coronagraph performance.

astro-ph.IM↗

arXiv2026

Exploring Exoplanets with Interferometry

(Extract from the Executive Summary) Humanity stands at the threshold of answering one of its most profound questions: Does life exist beyond Earth? Ongoing and upcoming space missions, together with powerful ground-based instruments, have prepared the way for a transformational next step - the detailed characterization of Earth analogs orbiting Sun-like and other stars and the search for atmospheric biosignatures that may indicate life. Within this context, the European Space Agency's Voyage 2050 process has identified the direct detection of thermal emission from temperate terrestrial exoplanets in the mid-infrared (mid-IR) as a top scientific priority. The Large Interferometer For Exoplanets (LIFE) - a space-based, mid-IR nulling interferometer - is designed to meet this goal. LIFE will be capable of detecting climate-relevant gases such as CO$_2$ and H$_2$O, identifying classical biosignatures like O$_3$ and CH$_4$, and probing additional, non-classical biosignatures. It will also provide key data for determining planetary radius, albedo, and temperature, which are essential for assessing habitability. In parallel, the U.S. National Academy has recommended a complementary mission now called the Habitable Worlds Observatory (HWO) - a ~6-meter space telescope equipped with advanced coronagraphs to suppress starlight by a factor of ~10$^{10}$ across the visible and possibly into the near-infrared and near-ultraviolet. Together, LIFE and HWO offer synergistic capabilities, enabling a comprehensive and robust assessment of the prevalence of life-bearing exoplanets in our galactic neighbourhood - a first in human history. By uniting an international and interdisciplinary community of scientists and engineers, LIFE offers a credible pathway toward the direct detection and characterization of potentially habitable - and even inhabited - worlds.

astro-ph.IM↗

arXiv2025

Astrometric Methods for Detecting Exomoons Orbiting Imaged Exoplanets: Prospects for Detecting Moons Orbiting a Giant Planet in $α$ Centauri A's Habitable Zone

Nearby giant exoplanets offer an opportunity to search for moons (exomoons) orbiting them. Here, we present a simulation framework for investigating the possibilities of detecting exomoons via their astrometric signal in planet-to-star relative astrometry. We focus our simulations on $α$ Centauri A, orbited by a hypothetical giant planet consistent with candidate detections in Very Large Telescope and James Webb Space Telescope observations. We consider a variety of observatory architectures capable of searching for exomoons, including upcoming facilities and also a hypothetical dedicated facility $-$ e.g., a purpose-built space telescope with diameter = 3m, central observing wavelength of 500 nm, and contrast-limited performance of $\sim$10$^{-9}$ in 1 hr observations. We find that such a facility would be capable of detecting $\sim$Earth-mass moons in a five year campaign, assuming a Saturn-mass planet. More generally, we simulate expected detection limits for a variety of levels of astrometric precision. We find that moons as small as $\sim$0.2 M$_\oplus$ on orbital periods of 4$-$30 days can be detected with astrometric precision of 0.1 mas and observing cadence of 1 hr over a five year campaign. Additionally, we find that a 39m ground-based telescope can detect Earth-sized exomoons orbiting the same hypothetical planet with a more modest observing cadence of one day. We discuss these results as motivation for a dedicated space observatory as well as a more detailed study of the physical parameters of a greater variety of star-planet-moon systems.

astro-ph.EP↗

arXiv2025

The Space Coronagraph Optical Bench (SCoOB): 8. end-to-end numerical modeling of the testbed to estimate the contrast limits

The space coronagraph optical bench (SCoOB) at the University of Arizona is a high-contrast imaging testbed designed to operate in a vacuum to obtain a contrast better than 1e-8 in optical wavelengths using vector vortex coronagraph (VVC) masks. The testbed performance in a half-sided D-shaped dark hole is 2.2e-9 in a << 1% BW, 4e-9 in a 2% BW, and 2.5e-8 in a 15% BW. While the testbed has met the design specification contrast requirements in monochromatic wavelengths, comprehensive end-to-end numerical modeling to assess contrast limits across different bandpasses has yet to be conducted. In this work, we discuss the results of numerical modeling for the SCoOB testbed in both monochromatic and 10% bandwidths at 525 nm and 630 nm. This modeling incorporates measured VVC retardance, modeled polarization aberrations, measured surface and reflectivity errors, and diffuse and surface reflectivity. We explore and discuss the various factors contributing to the contrast limits.

astro-ph.IM↗

arXiv2024

Optical alignment of contamination-sensitive Far-Ultraviolet spectrographs for Aspera SmallSat mission

Aspera is a NASA Astrophysics Pioneers SmallSat mission designed to study diffuse OVI emission from the warm-hot phase gas in the halos of nearby galaxies. Its payload consists of two identical Rowland Circle-type long-slit spectrographs, sharing a single MicroChannel plate detector. Each spectrograph channel consists of an off-axis parabola primary mirror and a toroidal diffraction grating optimized for the 1013-1057 Angstroms bandpass. Despite the simple configuration, the optical alignment/integration process for Aspera is challenging due to tight optical alignment tolerances, driven by the compact form factor, and the contamination sensitivity of the Far-Ultraviolet optics and detectors. In this paper, we discuss implementing a novel multi-phase approach to meet these requirements using state-of-the-art optical metrology tools. For coarsely positioning the optics we use a blue-laser 3D scanner while the fine alignment is done with a Zygo interferometer and a custom computer-generated hologram. The detector focus requires iterative in-vacuum alignment using a Vacuum UV collimator. The alignment is done in a controlled cleanroom facility at the University of Arizona.

astro-ph.IM↗

arXiv2024

The Space Coronagraph Optical Bench (SCoOB): 5. End-to-end simulations of polarization aberrations

Polarization aberrations originating from the telescope and high-contrast imaging instrument optics introduce polarization-dependent speckles and associated errors in the image plane, affecting the measured exoplanet signal. Understanding this effect is critical for future space-based high-contrast imaging instruments that aim to image the Earth analogs with 1e-10 raw contrast and characterize their atmospheres. We present end-to-end modeling of the polarization aberrations for a high-contrast imaging testbed, SCoOB. We use a vector vortex coronagraph (VVC) as the focal plane mask, incorporate polarization filtering, and estimate the peak contrast in the dark hole region. The dominant polarization aberrations in the system are retardance defocus and tilt due to the OAPs and fold mirrors. Although the mean contrast in the dark hole region remains unaffected by the polarization aberrations, we see brighter speckles limiting the contrast to 1e-9 at smaller inner working angles. We extend the simulations using the measured retardance maps for the VVC. We find that the mean contrast in SCoOB is more sensitive to the VVC and the QWP retardance errors than the polarization aberrations.

astro-ph.IM↗

arXiv2024

Optical modeling for the evaluation of HOWFSC on embedded processors

The correction of quasi-static wavefront errors within a coronagraphic optical system will be a key challenge to overcome in order to directly image exoplanets in reflected light. These quasi-static errors are caused by mid to high-order surface errors on the optical elements as a result of manufacturing processes. Using high-order wavefront sensing and control (HOWFSC) techniques that do not introduce non-common path aberrations, the quasi-static errors can be corrected within the desired region of interest designated as the dark hole. For the future Habitable Worlds Observatory (HWO), HOWFSC algorithms will be key to attaining the desired contrasts. To simulate the performance of HOWFSC with space rated processors, optical models for a 6 m class space-borne observatory and a coronagraph have been developed. Phenomena such as the Talbot effect and beamwalk are included in the simulations using combinations of ray-based modeling and end-to-end propagation techniques. After integrating the optical models with the embedded processors, simulations with realistic computation times can be performed to understand the computational hardware performance that will be needed to maintain the desired contrasts. Here, the details of the optical models are presented along with the HOWFSC methods utilized. Initial results of the HOWFSC methods are also included as a demonstration of how system drifts will degrade the contrast and require dark hole maintenance.

astro-ph.IM↗

arXiv2023

Simulation of high-contrast polarimetric observations of debris disks with the Roman Coronagraph Instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument will enable the polarimetric imaging of debris disks and inner dust belts in the optical and near-infrared wavelengths, in addition to the high-contrast polarimetric imaging and spectroscopy of exoplanets. The Coronagraph uses two Wollaston prisms to produce four orthogonally polarized images and is expected to measure the polarization fraction with measurement errors < 3% per spatial resolution element. To simulate the polarization observations through the Hybrid Lyot Coronagraph (HLC) and Shaped Pupil Coronagraph (SPC), we model disk scattering, the coronagraphic point-response function, detector noise, speckles, jitter, and instrumental polarization and calculate the Stokes parameters. To illustrate the potential for discovery and a better understanding of known systems with both the HLC and SPC modes, we model the debris disks around Epsilon Eridani and HR 4796A, respectively. For Epsilon Eridani, using astrosilicates with 0.37+/-0.01 as the peak input polarization fraction in one resolution element, we recover the peak disk polarization fraction of 0.33+/-0.01. Similarly, for HR 4796A, for a peak input polarization fraction of 0.92+/-0.01, we obtain the peak output polarization fraction as 0.80+/-0.03. The Coronagraph design meets the required precision, and forward modeling is needed to accurately estimate the polarization fraction.

astro-ph.EP↗

arXiv2023

Simulating the efficacy of the implicit-electric-field-conjugation algorithm for the Roman Coronagraph with noise

The Roman Coronagraph is expected to perform its high-order wavefront sensing and control (HOWFSC) with a ground-in-the-loop scheme due to the computational complexity of the Electric-Field-Conjugation (EFC) algorithm. This scheme provides the flexibility to alter the HOWFSC algorithm for given science objectives. A new alternative implicit-EFC algorithm is of particular interest as it requires no optical model to create a dark-hole, making the final contrast independent of the model accuracy. The intended HOWFSC scheme involves running EFC while observing a bright star such as $ζ$ Puppis to create the initial dark-hole, then slew to the science target while maintaining the contrast with low-order WFSC over the given observation. Given a similar scheme, the efficacy of iEFC is simulated for two coronagraph modes, namely the Hybrid Lyot Coronagraph (HLC) and the wide-field-of-view Shaped-Pupil-Coronagraph (SPC-WFOV). End-to-end physical optics models for each mode serve as the tool for the simulations. Initial monochromatic simulations are presented and compared with monochromatic EFC results obtained with the FALCO software. Various sets of calibration modes are tested to understand the optimal modes to use when generating an iEFC response matrix. Further iEFC simulations are performed using broadband images with the assumption that $ζ$ Puppis is the stellar object being observed. Shot noise, read noise, and dark current are included in the broadband simulations to determine if iEFC could be a suitable alternative to EFC for the Roman Coronagraph.

astro-ph.IM↗

arXiv2020

Mueller matrix maps of dichroic filters reveal polarization aberrations

Dichroic filters are used by instrument designers to split a field of view into different optical paths for simultaneous measurement of different spectral bands. Quantifying the polarization aberrations of a dichroic is relevant for predicting the incident polarization states downstream, which could affect the performance of diffraction limited systems. One important application is the fore-optics of exoplanet imaging coronagraphs. In this work, the polarization properties of the Edmund #69-205 650 nm roll-off dichroic are measured using a rotating retarder Mueller matrix imaging polarimeter. The polarization properties of this commercial dichroic are compared at normal and 45$^{\circ}$ angle of incidence. The normal incidence measurements verify the instrument calibration since no polarization aberrations were observed. Transmission measurements at 680 nm and 45$^{\circ}$ yield a 2.9 rad magnitude of retardance and 0.95 diattenuation. Effectively, at 630 nm the dichroic is a $λ$/4 waveplate with a horizontal fast-axis.

astro-ph.IM↗

arXiv2020

Betelgeuse scope: Single-mode-fibers-assisted optical interferometer design for dedicated stellar activity monitoring

Betelgeuse has gone through a sudden shift in its brightness and dimmed mysteriously. This is likely caused by a hot blob of plasma ejected from Betelgeuse and then cooled to obscuring dust. If true, it is a remarkable opportunity to directly witness the formation of dust around a red supergiant star. Today's optical telescope facilities are not optimized for time-evolution monitoring of the Betelgeuse surface, so in this work, we propose a low-cost optical interferometer. The facility will consist of $12 \times 4$ inch optical telescopes mounted on the surface of a large radio dish for interferometric imaging; polarization-maintaining single-mode fibers will carry the coherent beams from the individual optical telescopes to an all-in-one beam combiner. A fast steering mirror assisted fiber injection system guides the flux into fibers. A metrology system senses vibration-induced piston errors in optical fibers, and these errors are corrected using fast-steering delay lines. We will present the design.

astro-ph.IM↗

arXiv2018

The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Interim Report

For the first time in human history, technologies have matured sufficiently to enable a mission capable of discovering and characterizing habitable planets like Earth orbiting sunlike stars other than the Sun. At the same time, such a platform would enable unique science not possible from ground-based facilities. This science is broad and exciting, ranging from new investigations of our own solar system to a full range of astrophysics disciplines. The Habitable Exoplanet Observatory, or HabEx, is one of four studies currently being undertaken by NASA in preparation for the 2020 Astrophysics Decadal Survey. HabEx has been designed to be the Great Observatory of the 2030s, with community involvement through a competed and funded Guest Observer (GO) program. This interim report describes the HabEx baseline concept, which is a space-based 4-meter diameter telescope mission concept with ultraviolet (UV), optical, and near-infrared (near-IR) imaging and spectroscopy capabilities. More information on HabEx can be found at https://www.jpl.nasa.gov/habex

astro-ph.IM↗

arXiv2018

Modeling coronagraphic extreme wavefront control systems for high contrast imaging in ground and space telescope missions

The challenges of high contrast imaging (HCI) for detecting exoplanets for both ground and space applications can be met with extreme adaptive optics (ExAO), a high-order adaptive optics system that performs wavefront sensing (WFS) and correction at high speed. We describe two ExAO optical system designs, one each for ground-based telescopes and space-based missions, and examine them using the angular spectrum Fresnel propagation module within the Physical Optics Propagation in Python (POPPY) package. We present an end-to-end (E2E) simulation of the MagAO-X instrument, an ExAO system capable of delivering 6$\times10^{-5}$ visible-light raw contrast for static, noncommon path aberrations without atmosphere. We present a laser guidestar (LGS) companion spacecraft testbed demonstration, which uses a remote beacon to increase the signal available for WFS and control of the primary aperture segments of a future large space telescope, providing on order of a factor of ten factor improvement for relaxing observatory stability requirements. The LGS E2E simulation provides an easily adjustable model to explore parameters, limits, and trade-offs on testbed design and characterization.

astro-ph.IM↗

arXiv2018

MagAO-X: project status and first laboratory results

MagAO-X is an entirely new "extreme" adaptive optics system for the Magellan Clay 6.5 m telescope, funded by the NSF MRI program starting in Sep 2016. The key science goal of MagAO-X is high-contrast imaging of accreting protoplanets at H$α$. With 2040 actuators operating at up to 3630 Hz, MagAO-X will deliver high Strehls (>70%), high resolution (19 mas), and high contrast ($< 1\times10^{-4}$) at H$α$ (656 nm). We present an overview of the MagAO-X system, review the system design, and discuss the current project status.

astro-ph.IM↗

arXiv2017

Simulating the WFIRST coronagraph Integral Field Spectrograph

A primary goal of direct imaging techniques is to spectrally characterize the atmospheres of planets around other stars at extremely high contrast levels. To achieve this goal, coronagraphic instruments have favored integral field spectrographs (IFS) as the science cameras to disperse the entire search area at once and obtain spectra at each location, since the planet position is not known a priori. These spectrographs are useful against confusion from speckles and background objects, and can also help in the speckle subtraction and wavefront control stages of the coronagraphic observation. We present a software package, the Coronagraph and Rapid Imaging Spectrograph in Python (crispy) to simulate the IFS of the WFIRST Coronagraph Instrument (CGI). The software propagates input science cubes using spatially and spectrally resolved coronagraphic focal plane cubes, transforms them into IFS detector maps and ultimately reconstructs the spatio-spectral input scene as a 3D datacube. Simulated IFS cubes can be used to test data extraction techniques, refine sensitivity analyses and carry out design trade studies of the flight CGI-IFS instrument. crispy is a publicly available Python package and can be adapted to other IFS designs.

astro-ph.IM↗

arXiv2016

Inverting OII 83.4 nm Dayglow Profiles Using Markov Chain Radiative Transfer

Emission profiles of the resonantly scattered OII~83.4~nm triplet can in principle be used to estimate $\mathrm{O}^+$ density profiles in the F2 region of the ionosphere. Given the emission source profile, solution of this inverse problem is possible, but requires significant computation. The traditional Feautrier solution to the radiative transfer problem requires many iterations to converge, making it time-consuming to compute. A Markov chain approach to the problem produces similar results by directly constructing a matrix that maps the source emission rate to an effective emission rate which includes scattering to all orders. The Markov chain approach presented here yields faster results and therefore can be used to perform the $\mathrm{O}^+$ density retrieval with higher resolution than would otherwise be possible.

physics.space-ph↗