arXiv subjects

Ewan S. Douglas

Publications and source records attributed to Ewan S. Douglas.

At least 37 records · Page 2Linked to original sources

arXiv2025

Stages of commissioning alignment for three-mirror anastigmat (TMA) telescopes

Reliable, autonomously, deployment of telescopes enables a wide range of possible science cases. In this paper, we present a method for multi-stage telescope alignment with a simple commercial imaging sensor. For these studies, we use a design of an example three mirror anastigmat telescope and consider how the average spot size across the detector changes as a function of primary and secondary mirror positioning. This multi-stage alignment procedure will consist of three subprocesses, starting with a coarse alignment and converging down to a finer alignment before moving on to a stage where the telescope will refine its misalignments for data acquisition. This alignment strategy has been tested and meets diffraction limited requirements on a subset of misalignment cases from a statistical Monte Carlo simulation given misalignment tolerances on the telescope.

astro-ph.IM↗

arXiv2025

Polarization aberration modeling of internal occulters for coronagraphs

The Habitable Worlds Observatory (HWO) is a flagship mission concept proposing to characterize earth-like exoplanets at high contrast with a coronagraph instrument. The most in-depth, validated contrast error budgets made to date have been at the $10^{-9}$ planet-to-star contrast levels for the Roman Space Telescope. To obtain the raw contrast levels of $\leq 10^{-10}$ contrast needed for HWO, more modeling is needed of the vector diffraction effects within a coronagraph instrument. Several coronagraph architectures are based on the Lyot coronagraph, which utilizes a small occulting spot to block most of the on-axis starlight at a focal plane. In this paper, we present a study of the polarization aberrations generated by internal occulting spots. First, we use finite-difference time-domain (FDTD) modeling to produce the complex transmission of the occulter in each polarization state, and then we separately run those through a closed-loop wavefront control model in FALCO\cite{rigss2018falco} to determine the degradation in achievable contrast. We perform sweeps of such parameters as spot diameter, spot thickness, and angle of incidence to inform the HWO instrument design.

astro-ph.IM↗

arXiv2025

Performance predictions and contrast limits for an ultraviolet high contrast imaging testbed

NASA's Habitable Worlds Observatory (HWO) concept and the 2020 Decadal Survey's recommendation to develop a large space telescope to "detect and characterize Earth-like extrasolar planets" requires new starlight suppression technologies to probe a variety of biomarkers across multiple wavelengths. Broadband absorption due to ozone dominates Earth's spectrum in the mid-ultraviolet (200-300 nm) and can be detected with low spectral resolution. Despite the high value of direct ultraviolet (UV) exoplanet observations, high-contrast coronagraph demonstrations have yet to be performed in the UV. Typical coronagraph leakage sources such as wavefront error, surface scatter, polarization aberrations, and coronagraph mask quality all become more significant in the UV and threaten the viability of HWO to produce meaningful science in this regime. As a first step toward a demonstration of UV coronagraphy in a laboratory environment, we develop an end-to-end model to produce performance predictions and a contrast budget for a vacuum testbed operating at wavelengths from 200-400nm. At 300nm, our model predicts testbed performance of ${\sim}3\times10^{-9}$ contrast in a narrow 2% bandwidth and $\lessapprox10^{-8}$ in a 5% bandwidth, dominated primarily by the chromatic residuals from surface errors on optics that are not conjugate to the pupil.

astro-ph.IM↗

arXiv2025

Polarization aberrations in next-generation Giant Segmented Mirror Telescopes (GSMTs). II. Influence of segment-to-segment coating variations on high-contrast imaging and polarimetry

Direct exo-Earth imaging is a key science goal for astronomy in the next decade. This ambitious task imposes a target contrast of ~10^-7 at wavelengths from I to J-band. In our prior study, we determined that polarization aberrations can limit the achievable contrast to 10^-5 to 10^-6 in the infrared. However, these results assumed a perfect coronagraph coupled to a telescope with an ideal coating on each of the mirrors. In this study we seek to understand the influence of polarization aberrations from segment-to-segment coating variations on coronagraphy and polarimetry. We use the Poke open-source polarization ray tracing package to compute the Jones pupil of each GSMT with spatially-varying coatings applied to the segments. The influence of the resultant polarization aberrations is simulated by propagating the Jones pupil through physical optics models of coronagraphs using HCIPy. After applying wavefront control from an ideal adaptive optics system, we determine that the segment-to-segment variations applied limit the performance of coronagraphy to a raw contrast of approximately 10^-8 in I-band, which is 2-3 orders of magnitude lower the target performance for high-contrast imaging systems on the ground. This is a negligible addition to the nominal polarization aberrations for ground-based systems. We further observe negligible degradation in polarimetric imaging of debris disks from segment-to-segment aberrations above and beyond the impact of nominal polarization aberration.

astro-ph.IM↗

arXiv2024

A PyTorch Benchmark for High-Contrast Imaging Post Processing

Direct imaging of exoplanets is a challenging task that involves distinguishing faint planetary signals from the overpowering glare of their host stars, often obscured by time-varying stellar noise known as "speckles". The predominant algorithms for speckle noise subtraction employ principal-based point spread function (PSF) fitting techniques to discern planetary signals from stellar speckle noise. We introduce torchKLIP, a benchmark package developed within the machine learning (ML) framework PyTorch. This work enables ML techniques to utilize extensive PSF libraries to enhance direct imaging post-processing. Such advancements promise to improve the post-processing of high-contrast images from leading-edge astronomical instruments like the James Webb Space Telescope and extreme adaptive optics systems.

astro-ph.EP↗

arXiv2024

Real-time control and data standardization on various telescopes and benches

Real-time control (RTC) is pivotal for any Adaptive Optics (AO) system, including high-contrast imaging of exoplanets and circumstellar environments. It is the brain of the AO system, and what wavefront sensing and control (WFS\&C) techniques need to work with to achieve unprecedented image quality and contrast, ultimately advancing our understanding of exoplanetary systems in the context of high contrast imaging (HCI). Developing WFS\&C algorithms first happens in simulation or a lab before deployment on-sky. The transition to on-sky testing is often challenging due to the different RTCs used. Sharing common RTC standards across labs and telescope instruments would considerably simplify this process. A data architecture based on the interprocess communication method known as shared memory is ideally suited for this purpose. The CACAO package, an example of RTC based on shared memory, was initially developed for the Subaru-SCExAO instrument and now deployed on several benches and instruments. This proceeding discusses the challenges, requirements, implementation strategies, and performance evaluations associated with integrating a shared memory-based RTC. The Santa Cruz Extreme AO Laboratory (SEAL) bench is a platform for WFS\&C development for large ground-based segmented telescopes. Currently, SEAL offers the user a non-real-time version of CACAO, a shared-memory based RTC package initially developed for the Subaru-SCExAO instrument, and now deployed on several benches and instruments. We show here the example of the SEAL RTC upgrade as a precursor to both RTC upgrade at the 3-m Shane telescopes at Lick Observatory (Shane-AO) and a future development platform for the Keck II AO. This paper is aimed at specialists in AO, astronomers, and WFS\&C scientists seeking a deeper introduction to the world of RTCs.

astro-ph.IM↗

arXiv2024

Focus diverse phase retrieval test results on broadband continuous wavefront sensing in space telescope applications

Continuous wavefront sensing benefits space observatories in on-orbit optical performance maintenance. To measure the phase of a wavefront, phase retrieval is an attractive technique as it uses multiple point spread function (PSF) images that are acquired by the telescope itself without extra metrology systems nor complicated calibration. The focus diverse phase retrieval utilizes PSFs from predetermined defocused positions to enhance the dynamic range of the algorithm. We describe an updated visible light active optics testbed with the addition of a linear motorized focus stage. The performance of the phase retrieval algorithm in broadband is tested under various cases. While broadband pass filters have advantages in higher signal-to-noise ratio (SNR), the performance of phase retrieval can be restricted due to blurred image caused by diffraction and increased computing cost. We used multiple bandpass filters (10 nm, 88 nm, and 150 nm) and investigated effects of bandwidth on the accuracy and required image acquisition conditions such as SNR, reaching accuracies below 20 nm RMS wavefront error at the widest bandwidth. We also investigated the dynamic range of the phase retrieval algorithm depending on the bandwidth and required amount of defocus to expand dynamic range. Finally, we simulated the continuous wavefront sensing and correction loop with a range of statistically generated representative telescope disturbance time series to test for edge cases.

astro-ph.IM↗

arXiv2024

Design and Test of Small Mirror Supports for Harsh Environments

As wavefront quality demands tighten on space systems for applications such as astronomy and laser communication, mounting small optics such that the wavefront is undisturbed, positioning is adjustable and the design is producible, while surviving harsh space environments, is a continuing challenge. We designed multiple candidate flexure mounts to support small optics (up to 50 mm diameter, and over 100 grams) to survive the qualification and acceptance tests of small spacecraft and units as defined in ISO 19683 and a mounting structure which is adjustable in decenter [+/-0.5mm], tip/tilt +/-0.5deg, and piston [+/-0.25mm]. We will present design details along with measurements showing less than approximately lambda/10 wavefront contribution from the optic bonding process, along with thermal and multi-axis vibration test data showing the mounted optics survived the acceptance testing loads and are suitable for operation in a wide range of harsh environments.

astro-ph.IM↗

arXiv2024

Alignment of three mirror anastigmat telescopes using a multilayered stochastic parallel gradient descent algorithm

When a telescope doesn't reach a reasonable point spread function on the detector or detectable wavefront quality after initial assembly, a coarse phase alignment on-sky is crucial. Before utilizing a closed loop adaptive optics system, the observatory needs a strategy to actively align the telescope sufficiently for fine wavefront sensing. This paper presents a method of early-stage alignment using a stochastic parallel-gradient-descent (SPGD) algorithm which performs random perturbations to the optics of a three mirror anastigmat telescope design. The SPGD algorithm will drive the telescope until the wavefront error is below the acceptable range of the fine adaptive optics system to hand the telescope over. The focused spot size over the field of view is adopted as a feed parameter to the SPGD algorithm and wavefront peak-to-valley error values are monitored to directly compare our mechanical capabilities to our alignment goal of diffraction limited imaging and fine wavefront sensing.

astro-ph.IM↗

arXiv2024

Deepest limits on scattered light emission from the Epsilon Eridani inner debris disk with HST/STIS

Epsilon Eridani ($ε$ Eri) is one of the first debris disk systems detected by the Infrared Astronomical Satellite (IRAS). However, the system has thus far eluded detection in scattered light with no components having been directly imaged. Its similarity to a relatively young Solar System combined with its proximity makes it an excellent candidate to further our understanding of planetary system evolution. We present a set of coronagraphic images taken using the Space Telescope Imaging Spectrograph (STIS) coronagraph on the Hubble space telescope at a small inner working angle to detect a predicted warm inner debris disk inside 1". We used three different post-processing approaches; Non-negative Matrix Factorization (NMF), Karhunen-Lo`eve Image Processing (KLIP), and Classical reference differential imaging (RDI), to best optimize reference star subtraction, and find that NMF performed the best overall while KLIP produced the absolute best contrast inside 1". We present limits on scattered light from warm dust, with constraints on surface brightness at 6 mJy/as$^2$ at our inner working angle of 0.6". We also place a constraint of 0.5 mJy/as$^2$ outside 1", which gives us an upper limit on the brightness for outer disks and substellar companions. Finally, we calculated an upper limit on the dust albedo at $ω<$ 0.487.

astro-ph.EP↗

arXiv2024

The space coronagraph optical bench (SCoOB): 3. Mueller matrix polarimetry of a coronagraphic exit pupil

High-contrast imaging in the next decade aims to image exoplanets at smaller angular separations and deeper contrasts than ever before. A problem that has recently garnered attention for telescopes equipped with high-contrast coronagraphs is polarization aberration arising from the optics. These aberrations manifest as low-order aberrations of different magnitudes for orthogonal polarization states and spread light into the dark hole of the coronagraph that cannot be fully corrected. The origin of polarization aberrations has been modeled at the telescope level. However, we don't fully understand how polarization aberrations arise at the instrument level. To directly measure this effect, we construct a dual-rotating-retarder polarimeter around the SCoOB high-contrast imaging testbed to measure its Mueller matrix. With this matrix, we directly characterize the diattenuation, retardance, and depolarization of the instrument as a function of position in the exit pupil. We measure the polarization aberrations in the Lyot plane to understand how polarization couples into high-contrast imaging residuals.

astro-ph.IM↗

arXiv2024

Black Silicon BRDF and Polarization for Coronagraphic Pupil Masks

Future space observatories will likely have segmented primaries, causing diffraction effects that reduce coronagraph performance. Reflective binary pupil apodizer masks can mitigate these, with the metamaterial black silicon (BSi) showing promise as a strong absorber. To bring contrast ratios to the $10^-{10}$ level as needed to observe Earth-like exoplanets, feature sizes on these BSi masks will need to be less than $5$ microns when paired with MEMS (micro-electromechanical systems) deformable mirrors. As scalar diffraction cannot reliably model this feature size, we developed a Finite-Difference Time-Domain (FDTD) model of BSi masks using Meep software. We characterize the FDTD-derived polarization-dependent bidirectional reflectance distribution function of BSi and discuss the model's shortcomings.

astro-ph.IM↗

arXiv2024

Modeling and performance analysis of Implicit Electric Field Conjugation with two deformable mirrors applied to the Roman Coronagraph

High-order wavefront sensing and control (HOWFSC) is key to create a dark hole region within the coronagraphic image plane where high contrasts are achieved. The Roman Coronagraph is expected to perform its HOWFSC with a ground-in-the-loop scheme due to the computational complexity of the Electric Field Conjugation (EFC) algorithm. This scheme provides the flexibility to alter the HOWFSC algorithm for given science objectives. The baseline HOWFSC scheme involves running EFC while observing a bright star such as ζ Puppis to create the initial dark hole followed by a slew to the science target. The new implicit EFC (iEFC) algorithm removes the optical diffraction model from the controller, making the final contrast independent of model accuracy. While previously demonstrated with a single DM, iEFC is extended to two deformable mirror systems in order to create annular dark holes. The algorithm is then applied to the Wide-Field-of-View Shaped Pupil Coronagraph (SPC-WFOV) mode designed for the Roman Space Telescope using end-to-end physical optics models. Initial monochromatic simulations demonstrate the efficacy of iEFC as well as the optimal choice of modes for the SPC-WFOV instrument. Further simulations with a 3.6% wavefront control bandpass and a broader 10% bandpass then demonstrate that iEFC can be used in broadband scenarios to achieve contrasts below 1E-8 with Roman. Finally, an EMCCD model is implemented to estimate calibration times and predict the controller's performance. Here, 1E-8 contrasts are achieved with a calibration time of about 6.8 hours assuming the reference star is ζ Puppis. The results here indicate that iEFC can be a valid HOWFSC method that can mitigate the risk of model errors associated with space-borne coronagraphs, but to maximize iEFC performance, lengthy calibration times will be required to mitigate the noise accumulated during calibration.

astro-ph.IM↗

arXiv2024

A Generalized Expression for Accelerating Beamlet Decomposition Simulations

Paraxial diffraction modeling based on the Fourier transform has seen widespread implementation for simulating the response of a diffraction-limited optical system. For systems where the paraxial assumption is not sufficient, a class of algorithms has been developed that employs hybrid propagation physics to compute the propagation of an elementary beamlet along geometric ray paths. These "beamlet decomposition" algorithms include the well-known Gaussian Beamlet Decomposition (GBD) algorithm, of which several variants have been created. To increase the computational efficiency of the GBD algorithm, we derive an alternative expression of the technique that utilizes the analytical propagation of beamlets to tilted planes. We then use this accelerated algorithm to conduct a parameter-space search to find the optimal combination of free parameters in GBD to construct the analytical Airy function. The experiment is conducted on a consumer-grade CPU, and a high-performance GPU, where the new algorithm is 34 times faster than the previously published algorithm on CPUs, and 67,513 times faster on GPUs.

physics.optics↗

arXiv2024

Coronagraphic Data Post-processing Using Projections on Instrumental Modes

Directly observing exoplanets with coronagraphs is impeded by the presence of speckles from aberrations in the optical path, which can be mitigated in hardware with wavefront control as well as in post-processing. This work explores using an instrument model in post-processing to separate astrophysical signals from residual aberrations in coronagraphic data. The effect of wavefront error (WFE) on the coronagraphic intensity consists of a linear contribution and a quadratic contribution. When either of the terms is much larger than the other, the instrument response can be approximated by a transfer matrix mapping WFE to detector plane intensity. From this transfer matrix, a useful projection onto instrumental modes that removes the dominant error modes can be derived. We apply this projection to synthetically generated Roman Space Telescope hybrid Lyot coronagraph (HLC) data to extract "robust observables," which can be used instead of raw data for applications such as detection testing. The projection improves planet flux ratio detection limits by about 28% in the linear regime and by over a factor of 2 in the quadratic regime, illustrating that robust observables can increase sensitivity to astrophysical signals and improve the scientific yield from coronagraphic data. While this approach does not require additional information such as observations of reference stars or modulations of a deformable mirror, it can and should be combined with these other techniques, acting as a model-informed prior in an overall post-processing strategy.

astro-ph.IM↗

arXiv2023

Hybrid propagation physics for the design and modeling of astronomical observatories: a coronagraphic example

For diffraction-limited optical systems an accurate physical optics model is necessary to properly evaluate instrument performance. Astronomical observatories outfitted with coronagraphs for direct exoplanet imaging require physical optics models to simulate the effects of misalignment and diffraction. Accurate knowledge of the observatory's PSF is integral for the design of high-contrast imaging instruments and simulation of astrophysical observations. The state of the art is to model the misalignment, ray aberration, and diffraction across multiple software packages, which complicates the design process. Gaussian Beamlet Decomposition (GBD) is a ray-based method of diffraction calculation that has been widely implemented in commercial optical design software. By performing the coherent calculation with data from the ray model of the observatory, the ray aberration errors can be fed directly into the physical optics model of the coronagraph, enabling a more integrated model of the observatory. We develop a formal algorithm for the transfer-matrix method of GBD, and evaluate it against analytical results and a traditional physical optics model to assess the suitability of GBD for high-contrast imaging simulations. Our GBD simulations of the observatory PSF, when compared to the analytical Airy function, have a sum-normalized RMS difference of ~10^-6. These fields are then propagated through a Fraunhofer model of a exoplanet imaging coronagraph where the mean residual numerical contrast is 4x10^-11, with a maximum near the inner working angle at 5x10^-9. These results show considerable promise for the future development of GBD as a viable propagation technique in high-contrast imaging. We developed this algorithm in an open-source software package and outlined a path for its continued development to increase the fidelity and flexibility of diffraction simulations using GBD.

astro-ph.IM↗

arXiv2023

Approaches to developing tolerance and error budget for active three mirror anastigmat space telescopes

The size of the optics used in observatories is often limited by fabrication, metrology, and handling technology, but having a large primary mirror provides significant benefits for scientific research. The evolution of rocket launch options enables heavy payload carrying on orbit and outstretching the telescope's form-factor choices. Moreover, cost per launch is lower than the traditional flight method, which is obviously advantageous for various novel space observatory concepts. The University of Arizona has successfully fabricated many large-scale primary optics for ground-based observatories including the Large Binocular Telescope (LBT, 8.4 meter diameter two primary mirrors), Large Synoptic Survey Telescope (now renamed to Vera C. Rubin Observatory, 8.4 meter diameter monolithic primary and tertiary mirror), and the Giant Magellan Telescope (GMT, 8.4 meter diameter primary mirror seven segments). Launching a monolithic primary mirror into space could bypass many of the difficulties encountered during the assembly and deployment of the segmented primary mirrors. However, it might bring up unprecedented challenges and hurdles, also. We explore and foresee the expected challenges and evaluate them. To estimate the tolerance and optical error budget of a large optical system in space such as three mirror anastigmat telescope, we have developed a methodology that considers various errors from design, fabrication, assembly, and environmental factors.

astro-ph.IM↗

arXiv2023

Nancy Grace Roman Space Telescope Coronagraph Instrument Overview and Status

The Nancy Grace Roman Space Telescope Coronagraph Instrument is a critical technology demonstrator for NASA's Habitable Worlds Observatory. With a predicted visible-light flux ratio detection limit of 1E-8 or better, it will be capable of reaching new areas of parameter space for both gas giant exoplanets and circumstellar disks. It is in the final stages of integration and test at the Jet Propulsion Laboratory, with an anticipated delivery to payload integration in the coming year. This paper will review the instrument systems, observing modes, potential observing applications, and overall progress toward instrument integration and test.

astro-ph.IM↗