arXiv subjects

Ewelina Obrzud

Publications and source records attributed to Ewelina Obrzud.

12 recordsLinked to original sources

arXiv2026

Test of a 34 GHz EOM laser frequency comb at ESPRESSO

Laser frequency combs (LFCs) are a promising technology for wavelength calibration of astronomical high-resolution spectrographs requiring utmost accuracy and stability, since they directly translate the fundamental SI time standard from the radio frequency regime to optical frequencies. However, they have so far seen limited use in practice, due to their complexity, incomplete wavelength coverage, but also the challenges in the data analysis they imply. Here, we present a detailed test of a 34 GHz electro-optic modulation comb with the ESPRESSO spectrograph. Using thin-film lithum-niobate waveguides for broadening and harmonic generation, the setup provides partial coverage of the IR, visible, and near-UV spectral ranges. We focus on assessing the quality of the delivered spectra and their capability to facilitate accurate and stable wavelength calibration. We present a detailed analysis of the spectrally-diffuse background, the line width, and characterize the line-spread function over a broader width than possible with the ESPRESSO facility LFC. Comparing both combs, we find strong local discrepancies in the wavelength calibration accuracy up to 15m/s , which correlate with the echellogram structure. These do not originate from the lasers, but from misalignments in the ESPRESSO calibration unit, highlighting the strong need to make instrument fiber feeds more robust to light-injection effects. Nevertheless, we demonstrate excellent stability of the wavelength calibration, with a scatter of only 17cm/s . This, however, can only be achieved when accurately modeling the non-Gaussian line-spread function, showcasing the need for advanced data analysis techniques when dealing with LFC spectra.

astro-ph.IM↗

arXiv2025

Efficient Tunable THz wave generation using spectral shaping in electro-optic combs

We propose a novel method for generating terahertz (THz) waves using cascaded electro-optic modulators (EOMs), providing numerical simulations and experimental validations to demonstrate its effectiveness. The key of this technique is to apply hybrid amplitude and phase modulation to the incident light, which significantly enhances the control capability over the output optical spectrum. This enhanced control turns to be crucial for the efficient generation of THz waves. By carefully adjusting the relative phase offset between microwave RF signals applied to the amplitude and phase modulators and by applying an appropriate DC bias to the amplitude modulator, we can considerably reduce the optical power of unwanted sidebands. This allows us to concentrate more energy on desired frequencies, facilitating the generation of high-purity THz waves through optical heterodyne mixing at the detector. To validate our concept, we have successfully generated a dual-frequency-like laser with as spectral separation of 0.897 THz. This result was accomplished by modulating the phase EOM at 34.5 GHz with a modulation depth of ~4.7, paving the way for the generation of more practical and efficient THz waves.

physics.optics↗

arXiv2024

Ultraviolet astronomical spectrograph calibration with laser frequency combs from nanophotonic lithium niobate waveguides

Astronomical precision spectroscopy underpins searches for life beyond Earth, direct observation of the expanding Universe and constraining the potential variability of physical constants across cosmological scales. Laser frequency combs can provide the critically required accurate and precise calibration to the astronomical spectrographs. For cosmological studies, extending the calibration with such astrocombs to the ultraviolet spectral range is highly desirable, however, strong material dispersion and large spectral separation from the established infrared laser oscillators have made this exceedingly challenging. Here, we demonstrate for the first time astronomical spectrograph calibrations with an astrocomb in the ultraviolet spectral range below 400 nm. This is accomplished via chip-integrated highly nonlinear photonics in periodically-poled, nano-fabricated lithium niobate waveguides in conjunction with a robust infrared electro-optic comb generator, as well as a chip-integrated microresonator comb. These results demonstrate a viable route towards astronomical precision spectroscopy in the ultraviolet and may contribute to unlocking the full potential of next generation ground- and future space-based astronomical instruments.

physics.optics↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2021

Stable and compact RF-to-optical link using lithium niobate on insulator waveguides

Optical frequency combs have become a very powerful tool in metrology and beyond thanks to their ability to link radio frequencies with optical frequencies via a process known as self-referencing. Typical self-referencing is accomplished in two steps: the generation of an octave-spanning supercontinuum spectrum and the frequency-doubling of one part of that spectrum. Traditionally, these two steps have been performed by two separate optical components. With the advent of photonic integrated circuits, the combination of these two steps has become possible in a single small and monolithic chip. One photonic integrated circuit platform very well suited for on-chip self-referencing is lithium niobate on insulator - a platform characterised by high second and third order nonlinearities. Here we show that combining a lithium niobate on insulator waveguide with a silicon photodiode results in a very compact and direct low-noise path towards self-referencing of mode-locked lasers. Using digital servo electronics the resulting frequency comb is fully stabilized. Its high degree of stability is verified with an independent out-of-loop measurement and is quantified to be 6.8 mHz. Furthermore, we show that the spectrum generated inside the lithium niobate waveguide remains stable over many hours.

physics.app-ph↗

arXiv2020

Heteronuclear soliton molecules in optical microresonators

Optical soliton molecules are bound states of solitons that arise from the balance between attractive and repulsive effects. Having been observed in systems ranging from optical fibers to mode-locked lasers, they provide insights into the fundamental interactions between solitons and the underlying dynamics of the nonlinear systems. Here, we enter the multistability regime of a Kerr microresonator to generate superpositions of distinct soliton states that are pumped at the same optical resonance, and report the discovery of heteronuclear dissipative Kerr soliton molecules. Ultrafast electrooptical sampling reveals the tightly short-range bound nature of such soliton molecules, despite comprising dissipative Kerr solitons of dissimilar amplitudes, durations and carrier frequencies. Besides the significance they hold in resolving soliton dynamics in complex nonlinear systems, such heteronuclear soliton molecules yield coherent frequency combs whose unusual mode structure may find applications in metrology and spectroscopy.

physics.optics↗

arXiv2020

Photonic chip-based resonant supercontinuum

Supercontinuum generation in optical fibers is one of the most dramatic nonlinear effects discovered, allowing short pulses to be converted into multi-octave spanning coherent spectra. However, generating supercontinua that are both coherent and broadband requires pulses that are simultaneously ultrashort with high peak power. This results in a reducing efficiency with increasing pulse repetition rate, that has hindered supercontinua at microwave line spacing, i.e. 10s of GHz. Soliton microcombs by contrast, can generate octave-spanning spectra, but with good conversion efficiency only at vastly higher repetition rates in the 100s of GHz. Here, we bridge this efficiency gap with resonant supercontinuum, allowing supercontinuum generation using input pulses with an ultra-low 6 picojoule energy, and duration of 1 picosecond, 10-fold longer than what is typical. By applying synchronous pulse-driving to a dispersion-engineered, low-loss Si$_3$N$_4$ photonic chip microresonator, we generate dissipative Kerr solitons with a strong dispersive wave, both bound to the input pulse. This creates a smooth, flattened 2,200 line frequency comb, with an electronically detectable repetition rate of 28 GHz, constituting the largest bandwidth-line-count product for any microcomb generated to date. Strikingly, we observe that solitons exist in a weakly bound state with the input pulse, stabilizing their repetition rate, but simultaneously allowing noise transfer from one to the other to be suppressed even for offset frequencies 100 times lower than the linear cavity decay rate. We demonstrate that this nonlinear filtering can be enhanced by pulse-driving asynchronously, in order to preserve the coherence of the comb. Taken together, our work establishes resonant supercontinuum as a promising route to broadband and coherent spectra.

physics.optics↗

arXiv2019

Nonlinear filtering of an optical pulse train using dissipative Kerr solitons

The capability to store light for extended periods of time enables optical cavities to act as narrow-band optical filters, whose linewidth corresponds to the cavity's inverse energy storage time. Here, we report on nonlinear filtering of an optical pulse train based on temporal dissipative Kerr solitons in microresonators. Our experimental results in combination with analytical and numerical modelling show that soliton dynamics enables storing information about the system's physical state longer than the cavity's energy storage time, thereby giving rise to a filter width that can be more than an order of magnitude below the cavity's intrinsic linewidth. Such nonlinear optical filtering can find immediate applications in optical metrology, low-timing jitter ultra-short optical pulse generation and potentially opens new avenues for microwave photonics.

physics.optics↗

arXiv2019

Visible blue-to-red 10 GHz frequency comb via on-chip triple-sum frequency generation

A broadband visible blue-to-red, 10 GHz repetition rate frequency comb is generated by combined spectral broadening and triple-sum frequency generation in an on-chip silicon nitride waveguide. Ultra-short pulses of 150 pJ pulse energy, generated via electro-optic modulation of a 1560 nm continuous-wave laser, are coupled to a silicon nitride waveguide giving rise to a broadband near-infrared supercontinuum. Modal phase matching inside the waveguide allows direct triple-sum frequency transfer of the near-infrared supercontinuum into the visible wavelength range covering more than 250 THz from below 400 nm to above 600 nm wavelength. This scheme directly links the mature optical telecommunication band technology to the visible wavelength band and can find application in astronomical spectrograph calibration as well as referencing of continuous-wave lasers.

physics.optics↗

arXiv2018

Broadband near-infrared astronomical spectrometer calibration and on-sky validation with an electro-optic laser frequency comb

The quest for extrasolar planets and their characterisation as well as studies of fundamental physics on cosmological scales rely on capabilities of high-resolution astronomical spectroscopy. A central requirement is a precise wavelength calibration of astronomical spectrographs allowing for extraction of subtle wavelength shifts from the spectra of stars and quasars. Here, we present an all-fibre, 400 nm wide near-infrared frequency comb based on electro-optic modulation with 14.5 GHz comb line spacing. Tests on the high-resolution, near-infrared spectrometer GIANO-B show a photon-noise limited calibration precision of <10 cm/s as required for Earth-like planet detection. Moreover, the presented comb provides detailed insight into particularities of the spectrograph such as detector inhomogeneities and differential spectrograph drifts. The system is validated in on-sky observations of a radial velocity standard star (HD221354) and telluric atmospheric absorption features. The advantages of the system include simplicity, robustness and turn-key operation, features that are valuable at the observation sites.

physics.optics↗

arXiv2018

Frequency comb up- and down-conversion in a synchronously-driven $χ^{(2)}$ optical microresonator

Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared regime, many applications require combs at mid-infrared, visible or even ultra-violet wavelengths. Frequency combs can be transferred to other wavelengths via nonlinear optical processes, however, this becomes exceedingly challenging for high-repetition rate frequency combs. Here, it is demonstrated that a synchronously driven high-Q microresonator with a second-order optical nonlinearity can efficiently convert high-repetition rate near-infrared frequency combs to visible, ultra-violet and mid-infrared wavelengths providing new opportunities for microresonator and electro-optic combs in applications including molecular sensing, astronomy, and quantum optics.

physics.optics↗

arXiv2016

Temporal Solitons in Microresonators driven by Optical Pulses

Continuous-wave laser driven Kerr-nonlinear, optical microresonators have enabled a variety of novel applications and phenomena including the generation of optical frequency combs, ultra-low noise microwaves, as well as, ultra-short optical pulses. In this work we break with the paradigm of the continuous-wave optical drive and use instead periodic, pico-second optical pulses. We observe the deterministic generation of stable femtosecond dissipative cavity solitons on-top of the resonantly enhanced driving pulse. Surprisingly, the soliton pulse locks to the driving pulse enabling direct all-optical control of both the soliton's repetition rate and carrier-envelope offset frequency without the need for any actuation on the microresonator. When compared to both continuous-wave driven microresonators and non-resonant pulsed supercontinuum generation, this new approach is substantially more efficient and can yield broadband frequency combs at femto-Joule driving pulse energies and average laser powers significantly below the parametric threshold power of continuous-wave driven microresonators. The presented results bridge the fields of continuous-wave driven resonant and pulse-driven non-resonant nonlinear optics. They enables micro-photonic pulse compression, ultra-efficient low noise frequency comb and resonant supercontinuum generation for applications including optical data transfer and optical spectroscopy. From a scientific perspective the results open a new horizon for nonlinear photonics driven by temporally and spectrally structured light.

physics.optics↗