arXiv subjects

Ewout van den Berg

Publications and source records attributed to Ewout van den Berg.

At least 19 recordsLinked to original sources

arXiv2026

Large-scale Lindblad learning from time-series data

Learned open-quantum-system models have broad applications in device characterization, device calibration, realistic noise model construction, and bounding observable estimates in quantum simulation. To this end, we develop a highly scalable Lindblad learning protocol assuming an effective time-independent Lindblad generator with local interactions. For a given operation that can be applied repeatedly on a quantum computer, the protocol learns the Lindbladian by forming a linear system of equations for the model parameters in terms of a set of observable values and their gradients. The required gradient information is obtained by fitting time-series data with sums of exponentially damped sinusoids and differentiating those curves. We develop a robust curve-fitting procedure that finds a parsimonious representation of the data up to shot noise. We demonstrate the approach by learning the Lindbladian for a full layer of gates on a 156-qubit superconducting quantum processor, providing the first learning experiment of this kind. We study the effects of state-preparation and measurement errors and limitations on the operations that can be learned. For improved performance under readout errors, we propose an optional fine-tuning strategy that improves the fit between the time-evolved model and the measured data.

quant-ph↗

arXiv2026

Observable Estimation in the Absence of Classical Verification

The predictive success of quantum mechanics underpins many areas of modern science, even as the exact simulation of large, interacting quantum systems remains beyond the reach of classical computation. This success has been enabled by the remarkable advancement of scalable numerical approximation methods, which often demonstrate practical accuracy despite the absence of formal guarantees. As quantum simulation pushes into regimes where these approximations struggle, a fundamental challenge arises: How can quantum outcomes be trusted when reliable classical benchmarks are unavailable? Here, we establish a framework for the independent validation of quantum estimates in this setting and present evidence that they provide the most credible result among several considered methods, in the absence of an immediately accessible ground-truth solution. We apply our framework to the semi-scrambling dynamics of a physical model that strains several leading classical simulation methods yet remains experimentally accessible, in part through our introduction of the \textit{operator Loschmidt echo}. We systematically design a series of experiments using quantum heuristics that, taken together, test the underlying assumptions and provide strong confidence in the observable estimates obtained from the quantum computer. We then show how this framework can be extended to place accuracy bounds on quantum estimates via careful characterization and manipulation of the device noise, transforming the problem of validating the observable estimation to validating the noise model. These results establish a route towards trusted quantum computation for scientific discovery, independent of classical verification.

quant-ph↗

arXiv2026

Resolving Structure in Prethermal Floquet Dynamics with Precision Quantum Computation

Periodically driven interacting quantum many-body systems can exhibit long-lived prethermal dynamics, where local observables retain coherent structure even as entanglement and operator complexity grow. Accessing this regime at the system sizes and times needed to determine physical properties of the prethermal state remains a central challenge: state-of-the-art classical methods become unreliable, while noise in quantum hardware degrades observable expectation values. Here we overcome these limitations for a Floquet Ising magnet realized on a heavy-hex lattice. Using the advanced error mitigation software QESEM on an IBM Heron r3 superconducting quantum processor, we measure magnetization dynamics with percent-level precision and resolve long-lived subharmonic prethermal oscillations in systems of up to 74 qubits. These experiments reach regimes for which leading tensor-network simulations fail to converge, while sparse Pauli-path simulations remain strongly truncation dependent despite extensive computations on advanced GPUs and the Fugaku supercomputer. Leveraging this quantum-accessible regime, we extend finite-size scaling to larger systems and find an unexpectedly slow decrease of the oscillation amplitude with system size, providing strong evidence that this oscillatory response persists in the thermodynamic limit of heavy-hex ladders. A hierarchy of mitigation and validation tests, including unbiased error mitigation, agreement between independent mitigation estimators, noise-model validation on the superconducting hardware, and cross-platform corroboration at selected Floquet cycles on Quantinuum System Model H2 and Quantinuum Helios trapped-ion hardware, supports the reliability of these findings. Our work establishes error-mitigated quantum processors as quantitative scientific instruments for discovering new physics in non-equilibrium quantum matter.

quant-ph↗

arXiv2026

Computing noise-canceling observables via Pauli propagation

The pursuit of quantum advantage is driving the co-evolution of quantum processors and classical simulation methods. Despite advances in scale and quality, the accuracy of quantum simulation is ultimately limited by error rates and sampling overheads. Similarly, while classical simulation methods such as Pauli propagation have made remarkable progress, their accuracy is ultimately limited by the exponential growth of operator paths and the truncations needed to control memory and runtime. Here we show that these complementary limitations can be mitigated by embedding Pauli propagation within a hybrid error-mitigation framework that reduces quantum sampling overhead while achieving lower truncation errors with fewer classical resources than traditional Pauli propagation alone. In this framework, a target observable is classically propagated through noise-canceling inverse channels, producing a modified observable that is measured directly on a quantum processor. We prototype two implementations and benchmark their performance numerically on canonical models that challenge traditional Pauli propagation. We also perform experiments on a quantum processor using 56 superconducting qubits, revealing the tradeoffs of their respective truncation strategies. These results illustrate how classical and quantum resources can be orchestrated to extend observable estimation beyond the limits of either approach alone, providing a foundation for quantum-centric supercomputing and future demonstrations of quantum advantage.

quant-ph↗

arXiv2026

Better Pauli Channel Learning with Maximum Likelihood Estimation

Error mitigation in a noisy quantum device requires a very good estimate of the noise channel. The accuracy of probabilistic error cancellation is often limited by the high sample complexity of channel tomography. In principle, optimal sample complexity is attained by maximum likelihood estimation (MLE), but MLE is computationally challenging. We show that MLE can be made computationally tractable in certain cases of interest. For the common case of a 1D-local sparse Pauli-Lindblad channel, the likelihood function reduces to an efficiently-evaluable Bayesian network. We show that the resulting computation leads to substantially improved tomography. In addition, we demonstrate by simulation that this can lead to meaningful improvements to the overhead of error mitigation. We also discuss possible extensions of our algorithm to more general settings, such as non-1D circuits and non-Pauli errors.

quant-ph↗

arXiv2025

Error mitigation with stabilized noise in superconducting quantum processors

Pre-fault tolerant quantum computers have already demonstrated the ability to estimate observable values accurately, at a scale beyond brute-force classical computation. This has been enabled by error mitigation techniques that often rely on a representative model on the device noise. However, learning and maintaining these models is complicated by fluctuations in the noise over unpredictable time scales, for instance, arising from resonant interactions between superconducting qubits and defect two-level systems (TLS). Such interactions affect the stability and uniformity of device performance as a whole, but also affect the noise model accuracy, leading to incorrect observable estimation. Here, we experimentally demonstrate that tuning of the qubit-TLS interactions helps reduce noise instabilities and consequently enables more reliable error-mitigation performance. These experiments provide a controlled platform for studying the performance of error mitigation in the presence of quasi-static noise. We anticipate that the capabilities introduced here will be crucial for the exploration of quantum applications on solid-state processors at non-trivial scales.

quant-ph↗

arXiv2025

Controlization Schemes Based on Orthogonal Arrays

Realizing controlled operations is fundamental to the design and execution of quantum algorithms. In quantum simulation and learning of quantum many-body systems, an important subroutine consists of implementing a controlled Hamiltonian time-evolution. Given only black-box access to the uncontrolled evolution $e^{-iHt}$, controlizing it, i.e., implementing $\mathrm{ctrl}(e^{-iHt}) = |0\rangle\langle 0|\otimes I + |1\rangle\langle 1 |\otimes e^{-iHt}$ is non-trivial. Controlization has been recently used in quantum algorithms for transforming unknown Hamiltonian dynamics [OKTM24] leveraging a scheme introduced in Refs. [NSM15, DNSM21]. The main idea behind the scheme is to intersperse the uncontrolled evolution with suitable operations such that the overall dynamics approximates the desired controlled evolution. Although efficient, this scheme uses operations randomly sampled from an exponentially large set. In the present work, we show that more efficient controlization schemes can be constructed with the help of orthogonal arrays for unknown 2-local Hamiltonians. We conduct a detailed analysis of their performance and demonstrate the resulting improvements through numerical experiments. This construction can also be generalized to $k$-local Hamiltonians. Moreover, our controlization schemes based on orthogonal arrays can take advantage of the interaction graph's structure and be made more efficient.

quant-ph↗

arXiv2025

Efficient Lindblad synthesis for noise model construction

Effective noise models are essential for analyzing and understanding the dynamics of quantum systems, particularly in applications like quantum error mitigation and correction. However, even when noise processes are well-characterized in isolation, the effective noise channels impacting target quantum operations can differ significantly, as different gates experience noise in distinct ways. Here, we present a noise model construction method that builds an effective model from a Lindbladian description of the physical noise processes acting simultaneously to the desired gate operation. It employs the Magnus expansion and Dyson series, and can be utilized for both low-order symbolic and high-order numerical approximations of the noise channel of a multi-qubit quantum gate. We envision multiple use cases of our noise construction method such as (i) computing the corresponding noise channel from a learned Lindbladian, and (ii) generating the noise channel starting with physically motivated Lindbladians for a given hardware architecture. In doing so, we close the gap between physical Lindbladians and operational level noise model parameters. We demonstrate a strong agreement between our symbolic noise construction and full numerical Lindblad simulations for various two-qubit gates, in isolation and in three- and four-qubit scenarios, for a variety of physically motivated noise sources. Our symbolic construction provides a useful breakdown of how noise model parameters depend on the underlying physical noise parameters, which gives qualitative insight into the structure of errors. For instance, our theory provides insight into the interplay of Lindblad noise with the intended gate operations, and can predict how local Lindblad noise can effectively spread into multi-qubit error.

quant-ph↗

arXiv2024

Techniques for learning sparse Pauli-Lindblad noise models

Error-mitigation techniques such as probabilistic error cancellation and zero-noise extrapolation benefit from accurate noise models. The sparse Pauli-Lindblad noise model is one of the most successful models for those applications. In existing implementations, the model decomposes into a series of simple Pauli channels with one- and two-local terms that follow the qubit topology. While the model has been shown to accurately capture the noise in contemporary superconducting quantum processors for error mitigation, it is important to consider higher-weight terms and effects beyond nearest-neighbor interactions. For such extended models to remain practical, however, we need to ensure that they can be learned efficiently. In this work we present new techniques that accomplish exactly this. We introduce twirling based on Pauli rotations, which enables us to automatically generate single-qubit learning correction sequences and reduce the number of unique fidelities that need to be learned. In addition, we propose a basis-selection strategy that leverages graph coloring and uniform covering arrays to minimize the number of learning bases. Taken together, these techniques ensure that the learning of the extended noise models remains efficient, despite their increased complexity.

quant-ph↗

arXiv2024

Measuring central charge on a universal quantum processor

Central charge is a fundamental quantity in conformal field theories (CFT), and plays a crucial role in determining universality classes of critical points in two-dimensional systems. Despite its significance, the measurement of central charge has remained elusive thus far. In this work, we present the first experimental determination of the central charge using a universal quantum processor. Using a classically optimized variational quantum circuit and employing advanced error mitigation techniques, we successfully prepare ground states of various $1+1D$ quantum spin chain models at their critical point. Leveraging the heavy-hex structure of IBM quantum processors, we are able to implement periodic boundary conditions and mitigate boundary effects. We then extract the central charge from the scaling behavior of the sub-leading term of R{é}nyi generalizations of classical Shannon entropy, computed for local Pauli measurements in the conformal bases ($σ^{z}$ and $σ^x$). The experimental results are consistent with the known central charge values for the transverse field Ising (TFI) chain ($c=0.5$) and the XXZ chain ($c=1$), achieving relative errors as low as 5 percent.

quant-ph↗

arXiv2023

Probabilistic error cancellation for dynamic quantum circuits

Probabilistic error cancellation (PEC) is a technique that generates error-mitigated estimates of expectation values from ensembles of quantum circuits. In this work we extend the application of PEC from unitary-only circuits to dynamic circuits with measurement-based operations, such as mid-circuit measurements and classically-controlled (feedforward) Clifford operations. Our approach extends the sparse Pauli-Lindblad noise model to measurement-based operations while accounting for non-local measurement crosstalk in superconducting processors. Our mitigation and monitoring experiments provide a holistic view for the performance of the protocols developed in this work. These capabilities will be a crucial tool in the exploration of near-term dynamic circuit applications.

quant-ph↗

arXiv2022

Single-shot error mitigation by coherent Pauli checks

Generating samples from the output distribution of a quantum circuit is a ubiquitous task used as a building block of many quantum algorithms. Here we show how to accomplish this task on a noisy quantum processor lacking full-blown error correction for a special class of quantum circuits dominated by Clifford gates. Our approach is based on Coherent Pauli Checks (CPCs) that detect errors in a Clifford circuit by verifying commutation rules between random Pauli-type check operators and the considered circuit. Our main contributions are as follows. First, we derive a simple formula for the probability that a Clifford circuit protected by CPCs contains a logical error. In the limit of a large number of checks, the logical error probability is shown to approach the value ${\approx}7εn/5$, where $n$ is the number of qubits and $ε$ is the depolarizing error rate. Our formula agrees nearly perfectly with the numerical simulation results. Second, we show that CPCs are well-suited for quantum processors with a limited qubit connectivity. For example, the difference between all-to-all and linear qubit connectivity is only a 3X increase in the number of CNOT gates required to implement CPCs. Third, we describe simplified one-sided CPCs which are well-suited for mitigating measurement errors in the single-shot settings. Finally, we report an experimental demonstration of CPCs with up to 10 logical qubits and more than 100 logical CNOT gates. Our experimental results show that CPCs provide a marked improvement in the logical error probability for the considered task of sampling the output distribution of quantum circuits.

quant-ph↗

arXiv2022

Probabilistic error cancellation with sparse Pauli-Lindblad models on noisy quantum processors

Noise in pre-fault-tolerant quantum computers can result in biased estimates of physical observables. Accurate bias-free estimates can be obtained using probabilistic error cancellation (PEC), which is an error-mitigation technique that effectively inverts well-characterized noise channels. Learning correlated noise channels in large quantum circuits, however, has been a major challenge and has severely hampered experimental realizations. Our work presents a practical protocol for learning and inverting a sparse noise model that is able to capture correlated noise and scales to large quantum devices. These advances allow us to demonstrate PEC on a superconducting quantum processor with crosstalk errors, thereby providing an important milestone in opening the way to quantum computing with noise-free observables at larger circuit volumes.

quant-ph↗

arXiv2022

Model-free readout-error mitigation for quantum expectation values

Measurements on current quantum processors are subject to hardware imperfections that lead to readout errors. These errors manifest themselves as a bias in quantum expectation values. Here, we propose a very simple method that forces the bias in the expectation value to appear as a multiplicative factor that can be measured directly and removed at the cost of an increase in the sampling complexity for the observable. The method assumes no specific form of the noise, but only requires that the noise is `weak' to avoid excessive sampling overhead. We provide bounds relating the error in the expectation value to the sample complexity.

quant-ph↗

arXiv2021

A simple method for sampling random Clifford operators

We describe a simple algorithm for sampling $n$-qubit Clifford operators uniformly at random. The algorithm outputs the Clifford operators in the form of quantum circuits with at most $5n + 2n^2$ elementary gates and a maximum depth of $\mathcal{O}(n\log n)$ on fully connected topologies. The circuit can be output in a streaming fashion as the algorithm proceeds, and different parts of the circuit can be generated in parallel. The algorithm has an $\mathcal{O}(n^2)$ time complexity, which matches the current state of the art. The main advantage of the proposed algorithm, however, lies in its simplicity and elementary derivation.

quant-ph↗

arXiv2021

Efficient Bayesian phase estimation using mixed priors

We describe an efficient implementation of Bayesian quantum phase estimation in the presence of noise and multiple eigenstates. The main contribution of this work is the dynamic switching between different representations of the phase distributions, namely truncated Fourier series and normal distributions. The Fourier-series representation has the advantage of being exact in many cases, but suffers from increasing complexity with each update of the prior. This necessitates truncation of the series, which eventually causes the distribution to become unstable. We derive bounds on the error in representing normal distributions with a truncated Fourier series, and use these to decide when to switch to the normal-distribution representation. This representation is much simpler, and was proposed in conjunction with rejection filtering for approximate Bayesian updates. We show that, in many cases, the update can be done exactly using analytic expressions, thereby greatly reducing the time complexity of the updates. Finally, when dealing with a superposition of several eigenstates, we need to estimate the relative weights. This can be formulated as a convex optimization problem, which we solve using a gradient-projection algorithm. By updating the weights at exponentially scaled iterations we greatly reduce the computational complexity without affecting the overall accuracy.

quant-ph↗

arXiv2020

Circuit optimization of Hamiltonian simulation by simultaneous diagonalization of Pauli clusters

Many applications of practical interest rely on time evolution of Hamiltonians that are given by a sum of Pauli operators. Quantum circuits for exact time evolution of single Pauli operators are well known, and can be extended trivially to sums of commuting Paulis by concatenating the circuits of individual terms. In this paper we reduce the circuit complexity of Hamiltonian simulation by partitioning the Pauli operators into mutually commuting clusters and exponentiating the elements within each cluster after applying simultaneous diagonalization. We provide a practical algorithm for partitioning sets of Paulis into commuting subsets, and show that the proposed approach can help to significantly reduce both the number of CNOT operations and circuit depth for Hamiltonians arising in quantum chemistry. The algorithms for simultaneous diagonalization are also applicable in the context of stabilizer states; in particular we provide novel four- and five-stage representations, each containing only a single stage of conditional gates.

quant-ph↗

arXiv2019

On sets of commuting and anticommuting Paulis

In this work we study the structure and cardinality of maximal sets of commuting and anticommuting Paulis in the setting of the abelian Pauli group. We provide necessary and sufficient conditions for anticommuting sets to be maximal, and present an efficient algorithm for generating anticommuting sets of maximum size. As a theoretical tool, we introduce commutativity maps, and study properties of maps associated with elements in the cosets with respect to anticommuting minimal generating sets. We also derive expressions for the number of distinct sets of commuting and anticommuting abelian Paulis of a given size.

quant-ph↗