Searcharxiv⌕ Search

arXiv subjects

F. Arenou

Publications and source records attributed to F. Arenou.

At least 55 records · Page 3Linked to original sources

Gaia Radial Velocity Spectrometer

This paper presents the specification, design, and development of the Radial Velocity Spectrometer (RVS) on the European Space Agency's Gaia mission. Starting with the rationale for the full six dimensions of phase space in the dynamical modelling of the Galaxy, the scientific goals and derived top-level instrument requirements are discussed, leading to a brief description of the initial concepts for the instrument. The main part of the paper is a description of the flight RVS, considering the optical design, the focal plane, the detection and acquisition chain, and the as-built performance drivers and critical technical areas. After presenting the pre-launch performance predictions, the paper concludes with the post-launch developments and mitigation strategies, together with a summary of the in-flight performance at the end of commissioning.

astro-ph.IM↗

Gaia Data Release 2: Processing the spectroscopic data

The Gaia Data Release 2 contains the 1st release of radial velocities complementing the kinematic data of a sample of about 7 million relatively bright, late-type stars. Aims: This paper provides a detailed description of the Gaia spectroscopic data processing pipeline, and of the approach adopted to derive the radial velocities presented in DR2. Methods: The pipeline must perform four main tasks: (i) clean and reduce the spectra observed with the Radial Velocity Spectrometer (RVS); (ii) calibrate the RVS instrument, including wavelength, straylight, line-spread function, bias non-uniformity, and photometric zeropoint; (iii) extract the radial velocities; and (iv) verify the accuracy and precision of the results. The radial velocity of a star is obtained through a fit of the RVS spectrum relative to an appropriate synthetic template spectrum. An additional task of the spectroscopic pipeline was to provide 1st-order estimates of the stellar atmospheric parameters required to select such template spectra. We describe the pipeline features and present the detailed calibration algorithms and software solutions we used to produce the radial velocities published in DR2. Results: The spectroscopic processing pipeline produced median radial velocities for Gaia stars with narrow-band near-IR magnitude Grvs < 12 (i.e. brighter than V~13). Stars identified as double-lined spectroscopic binaries were removed from the pipeline, while variable stars, single-lined, and non-detected double-lined spectroscopic binaries were treated as single stars. The scatter in radial velocity among different observations of a same star, also published in DR2, provides information about radial velocity variability. For the hottest (Teff > 7000 K) and coolest (Teff < 3500 K) stars, the accuracy and precision of the stellar parameter estimates are not sufficient to allow selection of appropriate templates. [Abridged]

astro-ph.GA↗

Gaia Data Release 2: Catalogue validation

The second Gaia data release (DR2), contains very precise astrometric and photometric properties for more than one billion sources, astrophysical parameters for dozens of millions, radial velocities for millions, variability information for half a million of stellar sources and orbits for thousands of solar system objects. Before the Catalogue publication, these data have undergone dedicated validation processes. The goal of this paper is to describe the validation results in terms of completeness, accuracy and precision of the various Gaia DR2 data. The validation processes include a systematic analysis of the Catalogue content to detect anomalies, either individual errors or statistical properties, using statistical analysis, and comparisons to external data or to models. Although the astrometric, photometric and spectroscopic data are of unprecedented quality and quantity, it is shown that the data cannot be used without a dedicated attention to the limitations described here, in the Catalogue documentation and in accompanying papers. A particular emphasis is put on the caveats for the statistical use of the data in scientific exploitation.

astro-ph.GA↗

Gaia Data Release 2: Properties and validation of the radial velocities

For Gaia DR2 (GDR2), 280 million spectra, collected by the RVS instrument on-board Gaia, were processed and median radial velocities were derived for 9.8 million sources brighter than Grvs = 12 mag. This paper describes the validation and properties of the median radial velocities published in GDR2. Quality tests and filters are applied to select, from the 9.8 million radial velocities, those with the quality to be published in GDR2. The accuracy of the selected sample is assessed with respect to ground-based catalogues. Its precision is estimated using both ground-based catalogues and the distribution of the Gaia radial velocity uncertainties. GDR2 contains median radial velocities for 7 224 631 stars, with Teff in the range [3550, 6900] K, which passed succesfully the quality tests. The published median radial velocities provide a full sky-coverage and have a completness with respect to the astrometric data of 77.2\% (for $G \leq 12.5$ mag). The median radial velocity residuals with respect to the ground-based surveys vary from one catalogue to another, but do not exceed a few 100s m/s. In addition, the Gaia radial velocities show a positive trend as a function of magnitude, which starts around Grvs $\sim 9$ mag and reaches about $+500$ m/s at Grvs $= 11.75$ mag. The overall precision, estimated from the median of the Gaia radial velocity uncertainties, is 1.05 km/s. The radial velocity precision is function of many parameters, in particular the magnitude and effective temperature. For bright stars, Grvs in [4, 8] mag, the precision is in the range 200-350 m/s, which is about 3 to 5 times more precise than the pre-launch specification of 1 km/s. At the faint end, Grvs = 11.75 mag, the precisions for Teff = 5000 K and 6500 K are respectively 1.4 km/s and 3.7 km/s.

astro-ph.IM↗

3D maps of interstellar dust in the Local Arm: using $Gaia$, 2MASS and APOGEE-DR14

Gaia data and stellar surveys open the way to the construction of detailed 3D maps of the Galactic interstellar (IS) dust based on the synthesis of star distances and extinctions. Reliable extinction measurements require very accurate photometric calibrations. We show the first step of an iterative process linking 3D dust maps and photometric calibrations and improving them simultaneously. Our previous 3D map of nearby IS dust was used to select low reddening SDSS/APOGEE-DR14 red giants, and this database served for an empirical effective temperature- and metallicity-dependent photometric calibration in the Gaia G and 2MASS Ks bands. This calibration has been combined with Gaia G-band empirical extinction coefficients recently published, G, J and Ks photometry and APOGEE atmospheric parameters to derive the extinction of a large fraction of the survey targets. Distances were estimated independently using isochrones and the magnitude-independent extinction K(J-Ks). This new dataset has been merged with the one used for the earlier version of dust map. A new Bayesian inversion of distance-extinction pairs has been performed to produce an updated 3D map. We present several properties of the new map. Its comparison with 2D dust emission reveals that all large dust shells seen in emission at mid- and high-latitude are closer than 300pc. The updated distribution constrains the well debated, X-ray bright North Polar Spur to originate beyond 800 pc. We use the Orion region to illustrate additional details and distant clouds. On the large scale the map reveals a complex structure of the Local Arm. 2 to 3 kpc-long chains of clouds appear in planes tilted by 15 deg with respect to the Galactic plane. A series of cavities oriented along a l=60-240deg axis crosses the Arm. (http://stilism.obspm.fr)

astro-ph.GA↗

The empirical Gaia G-band extinction coefficient

The first Gaia data release unlocked the access to the photometric information of 1.1 billion sources in the $G$-band. Yet, given the high level of degeneracy between extinction and spectral energy distribution for large passbands such as the Gaia $G$-band, a correction for the interstellar reddening is needed in order to exploit Gaia data. The purpose of this manuscript is to provide the empirical estimation of the Gaia $G$-band extinction coefficient $k_G$ for both the red giants and main sequence stars, in order to be able to exploit the first data release DR1. We selected two samples of single stars: one for the red giants and one for the main sequence. Both samples are the result of a cross-match between Gaia DR1 and 2MASS catalogues; they consist of high quality photometry in the $G$-, $J$- and $Ks$-bands. These samples were complemented by temperature and metallicity information retrieved from, respectively, APOGEE DR13 and LAMOST DR2 surveys. We implemented a Markov Chain Monte Carlo method where we used $(G-Ks)_0$ vs $T_\mathrm{eff}$ and $(J-Ks)_0$ vs $(G-Ks)_0$ calibration relations to estimate the extinction coefficient $k_G$ and we quantify its corresponding confidence interval via bootstrap resampling method. We tested our method on samples of red giants and main sequence stars, finding consistent solutions. We present here the determination of the Gaia extinction coefficient through a completely empirical method. Furthermore we provide the scientific community a formula for measuring the extinction coefficient as a function of stellar effective temperature, the intrinsic colour $(G-Ks)_0$ and absorption.

astro-ph.SR↗

Masses of the components of SB2 binaries observed with Gaia. IV. Accurate SB2 orbits for 14 binaries, and masses of 3 binaries

The orbital motion of non-contact double-lined spectroscopic binaries (SB2), with periods of a few tens of days to several years, holds unique accurate informations on individual stellar masses, that only long-term monitoring can unlock. The combination of radial velocity measurements from high-resolution spectrographs and astrometric measurements from high-precision interferometers allows the derivation of SB2 components masses down to the percent precision. Since 2010, we observed a large sample of SB2 with the SOPHIE spectrograph at the Observatoire de Haute-Provence, aiming at the derivation of orbital elements with sufficient accuracy to obtain masses of components with relative errors as low as 1$\%$ when the astrometric measurements of the Gaia satellite will be taken into account. In this paper we present the results from six years of observations of 14 SB2 systems with periods ranging from 33 to 4185 days. Using the TODMOR algorithm we computed radial velocities from the spectra, and then derived the orbital elements of these binary systems. The minimum masses of the 28 stellar components are then obtained with a sample average accuracy of 1.0$\pm$0.2$\,\%$. Combining the radial velocities with existing interferometric measurements, we derived the masses of the primary and secondary components of HIP 61100, HIP 95995 and HIP 101382 with relative errors for components (A,B) of respectively (2.0, 1.7)$\,\%$, (3.7, 3.7)$\,\%$, and (0.2, 0.1)$\,\%$. Using the Cesam2k stellar evolution code, we could constrain the initial He-abundance, age and metallicity for HIP 61100 and HIP 95995.

astro-ph.SR↗

Empirical photometric calibration of the Gaia Red Clump: colours, effective temperature and absolute magnitude

Gaia Data Release 1 allows to recalibrate standard candles such as the Red Clump stars. To use those, they first need to be accurately characterised. In particular, colours are needed to derive the interstellar extinction. As no filter is available for the first Gaia data release and to avoid the atmosphere model mismatch, an empirical calibration is unavoidable. The purpose of this work is to provide the first complete and robust photometric empirical calibration of the Gaia Red Clump stars of the solar neighbourhood, through colour-colour, effective temperature-colour and absolute magnitude-colour relations, from the Gaia, Johnson, 2MASS, Hipparcos, Tycho-2, APASS-SLOAN and WISE photometric systems, and the APOGEE DR13 spectroscopic temperatures. We used a 3D extinction map to select low reddening red giants. To calibrate the colour-colour and the effective temperature-colour relations, we developed a MCMC method which accounts for all variable uncertainties and selects the best model for each photometric relation. We estimate the Red Clump absolute magnitude through the mode of a kernel-based distribution function. We provide 20 colour vs G-Ks relations and the first Teff vs G-Ks calibration. We obtained the Red Clump absolute magnitudes for 15 photometric bands with, in particular, M_Ks = -1.606 +/- 0.009 and M_G = (0.495 +/- 0.009) + (1.121 +/- 0.128) (G-Ks-2.1). We present an unreddened Gaia-TGAS HR diagram and use the calibrations to compare its Red Clump and its Red Giant Branch Bump with the Padova isochrones.

astro-ph.SR↗

Gaia Data Release 1: The archive visualisation service

Context: The first Gaia data release (DR1) delivered a catalogue of astrometry and photometry for over a billion astronomical sources. Within the panoply of methods used for data exploration, visualisation is often the starting point and even the guiding reference for scientific thought. However, this is a volume of data that cannot be efficiently explored using traditional tools, techniques, and habits. Aims: We aim to provide a global visual exploration service for the Gaia archive, something that is not possible out of the box for most people. The service has two main goals. The first is to provide a software platform for interactive visual exploration of the archive contents, using common personal computers and mobile devices available to most users. The second aim is to produce intelligible and appealing visual representations of the enormous information content of the archive. Methods: The interactive exploration service follows a client-server design. The server runs close to the data, at the archive, and is responsible for hiding as far as possible the complexity and volume of the Gaia data from the client. This is achieved by serving visual detail on demand. Levels of detail are pre-computed using data aggregation and subsampling techniques. For DR1, the client is a web application that provides an interactive multi-panel visualisation workspace as well as a graphical user interface. Results: The Gaia archive Visualisation Service offers a web-based multi-panel interactive visualisation desktop in a browser tab. It currently provides highly configurable 1D histograms and 2D scatter plots of Gaia DR1 and the Tycho-Gaia Astrometric Solution (TGAS) with linked views. An innovative feature is the creation of ADQL queries from visually defined regions in plots. [abridged]

astro-ph.IM↗

Gaia Data Release 1. Testing the parallaxes with local Cepheids and RR Lyrae stars

Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.

astro-ph.SR↗

Gaia Data Release 1. Open cluster astrometry: performance, limitations, and future prospects

Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.

astro-ph.SR↗

Gaia Data Release 1: Catalogue validation

Before the publication of the Gaia Catalogue, the contents of the first data release have undergone multiple dedicated validation tests. These tests aim at analysing in-depth the Catalogue content to detect anomalies, individual problems in specific objects or in overall statistical properties, either to filter them before the public release, or to describe the different caveats of the release for an optimal exploitation of the data. Dedicated methods using either Gaia internal data, external catalogues or models have been developed for the validation processes. They are testing normal stars as well as various populations like open or globular clusters, double stars, variable stars, quasars. Properties of coverage, accuracy and precision of the data are provided by the numerous tests presented here and jointly analysed to assess the data release content. This independent validation confirms the quality of the published data, Gaia DR1 being the most precise all-sky astrometric and photometric catalogue to-date. However, several limitations in terms of completeness, astrometric and photometric quality are identified and described. Figures describing the relevant properties of the release are shown and the testing activities carried out validating the user interfaces are also described. A particular emphasis is made on the statistical use of the data in scientific exploitation.

astro-ph.IM↗

Masses of the components of SB2 binaries observed with Gaia. II. Masses derived from PIONIER interferometric observations for Gaia validation

In anticipation of the Gaia astrometric mission, a sample of spectroscopic binaries is being observed since 2010 with the Sophie spectrograph at the Haute--Provence Observatory. Our aim is to derive the orbital elements of double-lined spectroscopic binaries (SB2s) with an accuracy sufficient to finally obtain the masses of the components with relative errors as small as 1 % when combined with Gaia astrometric measurements. In order to validate the masses derived from Gaia, interferometric observations are obtained for three SB2s in our sample with F-K components: HIP 14157, HIP 20601 and HIP 117186. The masses of the six stellar components are derived. Due to its edge-on orientation, HIP 14157 is probably an eclipsing binary. We note that almost all the derived masses are a few percent larger than the expectations from the standard spectral-type-mass calibration and mass-luminosity relation. Our calculation also leads to accurate parallaxes for the three binaries, and the Hipparcos parallaxes are confirmed.

astro-ph.SR↗

The Gaia-ESO Survey: Extracting diffuse interstellar bands from cool star spectra, DIB-based interstellar medium line-of-sight structures at the kpc scale

We study how diffuse interstellar bands (DIBs) measured toward distance-distributed target stars can be used to locate dense interstellar (IS) clouds in the Galaxy and probe a line-of-sight (LOS) kinematical structure, a potential useful tool when gaseous absorption lines are saturated or not available in the spectral range. Cool target stars are numerous enough for this purpose. We have devised automated DIB fitting methods appropriate to cool star spectra and multiple IS components. The data is fitted with a combination of a synthetic stellar spectrum, a synthetic telluric transmission, and empirical DIB profiles. In parallel, stellar distances and extinctions are estimated self-consistently by means of a 2D Bayesian method, from spectroscopically-derived stellar parameters and photometric data. We have analyzed Gaia-ESO Survey (GES) and previously recorded spectra that probe between $\sim$ 2 and 10 kpc long LOS in five different regions of the Milky Way. Depending on the observed spectral intervals, we extracted one or more of the following DIBs: $λλ$ 6283.8, 6613.6 and 8620.4. For each field, we compared the DIB strengths with the Bayesian distances and extinctions, and the DIB Doppler velocities with the HI emission spectra. For all fields, the DIB strength and the target extinction are well correlated. In case of targets widely distributed in distance, marked steps in DIBs and extinction radial distance profiles match with each other and broadly correspond to the expected locations of spiral arms. For all fields, the DIB velocity structure agrees with HI emission spectra and all detected DIBs correspond to strong NaI lines. This illustrates how DIBs can be used to locate the Galactic interstellar gas and to study its kinematics at the kpc scale.

astro-ph.GA↗

Overview and stellar statistics of the expected Gaia Catalogue using the Gaia Object Generator

Aims: An effort has been undertaken to simulate the expected Gaia Catalogue, including the effect of observational errors. A statistical analysis of this simulated Gaia data is performed in order to better understand what can be obtained from the Gaia astrometric mission. This catalogue is used in order to investigate the potential yield in astrometric, photometric and spectroscopic information, and the extent and effect of observational errors on the true Gaia Catalogue. This article is a follow-up to Robin et. al. (2012), where the expected Gaia Catalogue content was reviewed but without the simulation of observational errors. Methods: The Gaia Object Generator (GOG) catalogue is analysed using the Gaia Analysis Tool (GAT), producing a number of statistics on the catalogue. Results: A simulated catalogue of one billion objects is presented, with detailed information on the 523 million individual single stars it contains. Detailed information is provided for the expected errors in parallax, position, proper motion, radial velocity, photometry in the four Gaia bands, and physical parameter determination including temperature, metallicity and line of sight extinction.

astro-ph.IM↗

Metallicity and kinematics of the bar in-situ

Constraints on the Galactic bulge/bar structure and formation history from stellar kinematics and metallicities mainly come from relatively high-latitude fields (|b|>4) where a complex mix of stellar population is seen. We aim here to constrain the formation history of the Galactic bar by studying the radial velocity and metallicity distributions of stars in-situ (|b|<1). We observed red clump stars in four fields along the bar's major axis (l=10,6,-6 and b=0 plus a field at l=0,b=1) with low-resolution spectroscopy from VLT/FLAMES, observing around the CaII triplet. We developed robust methods for extracting radial velocity and metallicity estimates from these low signal-to-noise spectra. We derived distance probability distributions using Bayesian methods rigorously handling the extinction law. We present radial velocities and metallicity distributions, as well as radial velocity trends with distance. We observe an increase in the radial velocity dispersion near the Galactic plane. We detect the streaming motion of the stars induced by the bar in fields at l=+/-6, the highest velocity components of this bar stream being metal-rich ([Fe/H]~0.2 dex). Our data is consistent with a bar inclined at 26+/-3 from the Sun-Galactic centre line. We observe a significant fraction of metal-poor stars, in particular in the field at l=0,b=1. We confirm the flattening of the metallicity gradient along the minor axis when getting closer to the plane, with a hint that it could actually be inverted. Our stellar kinematics corresponds to the expected behaviour of a bar issued from the secular evolution of the Galactic disc. The mix of several populations, seen further away from the plane, is also seen in the bar in-situ since our metallicity distributions highlight a different spatial distribution between metal-poor and metal-rich stars, the more metal-poor stars being more centrally concentrated.

astro-ph.GA↗

A new method based on Markov chains for deriving SB2 orbits directly from their spectra

We present a new method to derive orbital elements of double-lined spectroscopic binaries (SB2). The aim is to have accurate orbital parameters of a selection of SB2 in order to prepare the exploitation of astrometric Gaia observations. Combined with our results, they should allow one to measure the mass of each star with a precision of better than 1%. The new method presented here consists of using the spectra at all epochs simultaneously to derive the orbital elements without templates. It is based on a Markov chain including a new method for disentangling the spectra.

astro-ph.SR↗

Gaia Universe Model Snapshot : A statistical analysis of the expected contents of the Gaia catalogue

Context. This study has been developed in the framework of the computational simulations executed for the preparation of the ESA Gaia astrometric mission. Aims. We focus on describing the objects and characteristics that Gaia will potentially observe without taking into consideration instrumental effects (detection efficiency, observing errors). Methods. The theoretical Universe Model prepared for the Gaia simulation has been statistically analyzed at a given time. Ingredients of the model are described, giving most attention to the stellar content, the double and multiple stars, and variability. Results. In this simulation the errors have not been included yet. Hence we estimate the number of objects and their theoretical photometric, astrometric and spectroscopic characteristics in the case that they are perfectly detected. We show that Gaia will be able to potentially observe 1.1 billion of stars (single or part of multiple star systems) of which about 2% are variable stars, 3% have one or two exoplanets. At the extragalactic level, observations will be potentially composed by several millions of galaxies, half million to 1 million of quasars and about 50,000 supernovas that will occur during the 5 years of mission. The simulated catalogue will be made publicly available by the DPAC on the Gaia portal of the ESA web site http://www.rssd.esa.int/gaia/.

astro-ph.GA↗