arXiv subjects

F. Bosia

Publications and source records attributed to F. Bosia.

At least 19 recordsLinked to original sources

arXiv2024

The thin lens equation in elasticity: imaging with gradient index phononic crystals

Many works in elasticity have exploited the concept of gradient index (GRIN) lenses, borrowed from optics, for wave focusing and control. These effects are particularly attractive for cloaking, absorption or energy harvesting applications. Despite their potential, current lens designs suffer from limitations, mainly related to the difficulty in imaging point-like sources. Here, we exploit an alternative GRIN lens design, which enables a one-to-one correspondence between input and output phase, and allows to determine the focal length using the well-known thin lens equation, effectively establishing the elastic equivalent of the convex lens in optics. This is demonstrated analytically, obtaining a bijective relation between the location of a point-like source and its image, and the results are confirmed numerically and experimentally in an aluminium plate, where the lens is realized by introducing rows of circular cavities of variable diameters. Moreover, a proof-of-concept experiment demonstrates the possibility to image sources of flexural waves at the centimetre scale with subwavelength resolution. This research can extend applications of elastic GRIN lenses to new fields such as imaging and non-destructive testing, where the location of defects can be identified by focusing the scattered field. Multiple sources can be imaged simultaneously, and the combined effect of multiple lenses can also be used to design more complex systems, opening new possibilities in the technological exploitation of elastic wave manipulation.

physics.app-ph↗

arXiv2024

Tunable topological edge modes in Su-Schrieffer-Heeger arrays

A potential weakness of topological waveguides is that they act on a fixed narrow band of frequencies. However, by 3D printing samples from a photo-responsive polymer, we can obtain a device whose operating frequency can be fine-tuned dynamically using laser excitation. This greatly enhances existing static tunability strategies, typically based on modifying the geometry. We use a version of the classical Su-Schrieffer-Heeger model to demonstrate our approach.

physics.app-ph↗

arXiv2024

Seashell-inspired polarization-sensitive tonotopic metasensor

Bioinspiration has widely been demonstrated to be a powerful approach for the design of innovative structures and devices. Recently, this concept has been extended to the field of elasticity, dynamics, and metamaterials. In this paper, we propose a seashell-inspired metasensor that can simultaneously perform spatial frequency mapping and act as a polarizer. The structure emerges from a universal parametric design that encompasses diverse spiral geometries with varying circular cross sections and curvature radii, all leading to tonotopic behavior. Adoption of an optimization process leads to a planar geometry that enables us to simultaneously achieve tonotopy for orthogonally polarized modes, leading to the possibility to control polarization as well as the spatial distribution of frequency maxima along the spiral axis. We demonstrate the versatility of the device and discuss the possible applications in the field of acoustics and sensing.

cond-mat.mtrl-sci↗

arXiv2023

Tunable topologically protected waveguiding in auxetic nonlinear metamaterials

In this paper, we discuss the possibility of achieving tunable topologically protected edge modes through the application of uniaxial deformation in an auxetic metamaterial. The proposed structure consists of a thin slab with oriented cuts in a hexagonal lattice, where topologically protected band gaps are opened by introducing a controlled variation in the cut lengths. Numerical simulations demonstrate the existence of topologically protected and scatter-free wave propagation in the structure at the interface between two sub-domains with modified cells, in distinct frequency ranges. This only occurs in the presence of auxeticity. In addition, exploiting geometrical nonlinearity, the application of a uniaxial strain can be used to close the topological band gaps or to modify their frequency range, i.e., to weaken the localization effects or to shift the frequency at which they occur. The spatial and temporal variation of the applied strain field can thus be used for the dynamic tuning of metamaterial topological waveguiding properties, with applications in mechanical devices for logic operations and computations.

physics.app-ph↗

arXiv2023

Multiscale mechanical study of the Turritella terebra and Turritellinella tricarinata seashells

Marine shells are designed by nature to ensure mechanical protection from predators and shelter for mollusks living inside them. A large amount of work has been done to study the multiscale mechanical properties of their complex microstructure and to draw inspiration for the design of impact-resistant biomimetic materials. Less is known regarding the dynamic behavior related to their structure at multiple scales. Here, we present a combined experimental and numerical study of the shells of two different species of gastropod sea snail belonging to the Turritellidae family, featuring a peculiar helicoconic shape with hierarchical spiral elements. The proposed procedure involves the use of micro-Computed Tomography scans for the accurate determination of geometry, Atomic Force Microscopy and Nanoindentation to evaluate local mechanical properties, surface morphology and heterogeneity, as well as Resonant Ultrasound Spectroscopy coupled with Finite Element Analysis simulations to determine global modal behavior. Results indicate that the specific features of the considered shells, in particular their helicoconic and hierarchical structure, can also be linked to their vibration attenuation behavior. Moreover, the proposed investigation method can be extended to the study of other natural systems, to determine their structure-related dynamic properties, ultimately aiding the design of bioinspired metamaterials and of structures with advanced vibration control.

cond-mat.mtrl-sci↗

arXiv2022

Optimized structures for vibration attenuation and sound control in Nature: a review

Nature has engineered complex designs to achieve advanced properties and functionalities through evolution, over millions of years. Many organisms have adapted to their living environment producing extremely efficient materials and structures exhibiting optimized mechanical, thermal, optical properties, which current technology is often unable to reproduce. These properties are often achieved using hierarchical structures spanning macro, meso, micro and nanoscales, widely observed in many natural materials like wood, bone, spider silk and sponges. Thus far, bioinspired approaches have been successful in identifying optimized structures in terms of quasi-static mechanical properties, such as strength, toughness, adhesion, but comparatively little work has been done as far as dynamic ones are concerned (e.g. vibration damping, noise insulation, sound amplification, etc.). In particular, relatively limited knowledge currently exists on how hierarchical structure can play a role in the optimization of natural structures, although concurrent length scales no doubt allow to address multiple frequency ranges. Here, we review the main work that has been done in the field of structural optimization for dynamic mechanical properties, highlighting some common traits and strategies in different biological systems. We also discuss the relevance to bioinspired materials, in particular in the field of phononic crystals and metamaterials, and the potential of exploiting natural designs for technological applications.

physics.bio-ph↗

arXiv2022

Toughening and mechanosensing in bone: a perfectly balanced mechanism based on competing stresses

Bone is a stiff and though, hierarchical and continuously evolving material that optimizes its structure to respond to mechanical stimuli, which also govern growth and remodeling processes. However, a full understanding of the underlying mechanisms responsible for the cooperation of bone toughness and biological functions, with important implications in bone ageing, osteoporosis and tissue repair, has yet to be achieved. In particular, how micro-damage nucleation, needed for tissue remodeling, does not evolve into catastrophic failure in such a stiff material, still remains a partial enigma, cement lines, interfaces and sacrificial elements alone not providing a definitive answer to the question. Here, we bring to light a novel stress-based bone toughening mechanism, calling into play the nearly-symmetrical, chiral and hierarchical architecture of the osteons, demonstrating that their arrangement simultaneously gives rise to stress states alternating in sign along the osteon radius and to localized stress amplifications, both in the tensile and compressive regimes. This unveils a previously unforeseen synergistic mechanism allowing micro-damage accumulation without propagating cracks, kindled by the contrast between crack-opening due to tensile hoop stresses and crack-stopping due to compressive stresses at the crack tips in adjacent lamellae, which seal the crack ends conferring toughness to bone well beyond that predicted by current models. Furthermore, shear stresses occur at the lamellar interfaces, contributing with fluid flow to mechanically stimulate the osteocytes and to amplify the bone signalling. These results, obtained through original exact elastic solutions and confirmed by both FE fracture analyses and experimental tests on 3D-printed osteon prototypes, contribute with another piece in the puzzle to making the rational biophysical picture of bone mechanobiology complete.

physics.app-ph↗

arXiv2022

Topologically engineered 3D printed architectures with superior mechanical strength

Materials that are lightweight yet exhibit superior mechanical properties are of compelling importance for several technological applications that range from aircrafts to household appliances. Lightweight materials allow energy saving and reduce the amount of resources required for manufacturing. Researchers have expended significant efforts in the quest for such materials, which require new concepts in both tailoring material microstructure as well as structural design. Architectured materials, which take advantage of new engineering paradigms, have recently emerged as an exciting avenue to create bespoke combinations of desired macroscopic material responses. In some instances, rather unique structures have emerged from advanced geometrical concepts (e.g. gyroids, menger cubes, or origami/kirigami-based structures), while in others innovation has emerged from mimicking nature in bio-inspired materials (e.g. honeycomb structures, nacre, fish scales etc.). Beyond design, additive manufacturing has enabled the facile fabrication of complex geometrical and bio-inspired architectures, using computer aided design models. The combination of simulations and experiments on these structures has led to an enhancement of mechanical properties, including strength, stiffness and toughness. In this review, we provide a perspective on topologically engineered architectured materials that exhibit optimal mechanical behaviour and can be readily printed using additive manufacturing.

physics.app-ph↗

arXiv2021

Efficient broadband sound absorption exploiting rainbow labyrinthine metamaterials

In this work, we demonstrate in a proof of concept experiment the efficient noise absorption of a 3-D printed panel designed with appropriately arranged space-coiling labyrinthine acoustic elementary cells of various sizes. The labyrinthine unit cells are analytically and numerically analysed to determine their absorption characteristics and then fabricated and experimentally tested in an impedance tube to verify the dependence of absorption characteristics on cell thickness and lateral size. The resonance frequency of the unit cell is seen to scale approximately linearly with respect to both thickness and lateral size in the considered range, enabling easy tunability of the working frequency. Using these data, a flat panel is designed and fabricated by arranging cells of different dimensions in a quasi-periodic lattice, exploiting the acoustic "rainbow" effect, i.e. superimposing the frequency response of the different cells to generate a wider absorption spectrum, covering the target frequency range, chosen between 800 and 1400 Hz. The panel is thinner and more lightweight compared to traditional sound absorbing solutions and designed in modular form, so as to be applicable to different geometries. The performance of the panel is experimentally validated in a small-scale reverberation room, and an absorption close to ideal values is demonstrated at the desired frequencies of operation. Thus, this work suggests a design procedure for noise-mitigation panel solutions and provides experimental proof of the versatility and effectiveness of labyrinthine metamaterials for tunable mid- to low-frequency sound attenuation.

physics.app-ph↗

arXiv2021

Unveiling a new shear stress transfer mechanism in composites with helically wound hierarchical fibres

The mechanical performance of reinforced composites is strongly influenced at different scales by the stress transferred at the matrix-fibre interfaces and at any surface where material discontinuity occurs. In particular, the mechanical response of elastomeric composites where the reinforcement is composed by cords with helically wound fibres is heavily compromised by fatigue and delamination phenomena occurring at cord-rubber as well as at the ply interfaces, since rubber and polymeric matrices are mainly vulnerable to the accumulation of deviatoric energy due to the shear stresses transferred across the surfaces. Despite the large diffusion of composites in a vast field of applications and the mature knowledge of their behaviour, some key mechanical aspects underlying failure mechanisms are still partially unclear. For example, stress amplification and strain localization are often difficult to predict by means of analytical solutions and averaging techniques that usually conceal stress gradients. In this work, we analyse coupling between torsional and tensile loads in twisted cords, which are adopted in many cases to reinforce composites and rubbers in tire applications. We provide a model characterized by an enriched cord-matrix mechanical interplay able to theoretically explain and predict actual stress distributions responsible for the onset of delamination and fatigue-guided phenomena that are experimentally observed in these composites. In particular, we demonstrate that the assumption of a monoclinic/trigonal behaviour for the mechanical response of the hierarchical strands allows to estimate, by means of analytical formulas and a homogenization approach, hitherto neglected shear stresses at the matrix-reinforcement interface. These stresses are transferred to the neighbouring regions, leading to post-elastic behaviour and failure events.

physics.app-ph↗

arXiv2018

Polarized micro-Raman studies of femtosecond laser written stress-induced optical waveguides in diamond

Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond laser in the crystal is derived from the measured stress in the waveguides. The results help to explain the waveguide polarization sensitive guiding mechanism, as well as providing a technique for their optimization.

physics.optics↗

arXiv2017

Observation of a Lamb band gap in a polymer waveguide with periodic cross-like cavities

The quest for large and low frequency band gaps is one of the principal objectives pursued in a number of engineering applications, ranging from noise absorption to vibration control, to seismic wave abatement. For this purpose, a plethora of complex architectures (including multi-phase materials) and multi-physics approaches have been proposed in the past, often involving difficulties in their practical realization. To address this issue, in this work we propose an easy-to-manufacture design able to open large, low frequency complete Lamb band gaps exploiting a suitable arrangement of masses and stiffnesses produced by cavities in a monolithic material. The performance of the designed structure is evaluated by numerical simulations and confirmed by Scanning Laser Doppler Vibrometer (SLDV) measurements on an isotropic polyvinyl chloride plate in which a square ring region of cross-like cavities is fabricated. The full wave field reconstruction clearly confirms the ability of even a limited number of unit cell rows of the proposed design to efficiently attenuate Lamb waves. In addition, numerical simulations show that the structure allows to shift of the central frequency of the BG through geometrical modifications. The design may be of interest for applications in which large BGs at low frequencies are required.

physics.app-ph↗

arXiv2017

Tunable spider-web inspired hybrid labyrinthine acoustic metamaterials for low-frequency sound control

Attenuating low-frequency sound remains a challenge, despite many advances in this direction. Recently developed acoustic metamaterials enable efficient subwavelength wave manipulation and attenuation due to exotic effects such as unusually high reflectivity, negative refraction or cloaking. In particular, labyrinthine acoustic metamaterials can provide broadband sound reduction and exhibit extremely high effective refractive index values due to their characteristic topological architecture. In this paper, we design a novel labyrinthine metamaterial with hybrid characteristics compared to previously proposed structures, by exploiting a spider web-inspired configuration. The developed metamaterial structure is characterized by additional tunability of the frequencies at which band gaps or negative group velocity modes occur, thus enabling versatility in the functionalities of the resulting structures. Time transient simulations demonstrate the effectiveness of the proposed metamaterials in manipulating wave fields in terms of transmission/reflection coefficients, amplitude attenuation and time delay properties in broadband frequency ranges. Results could find applications in the development of practical lightweight acoustic shielding structures with enhanced broadband wave-reflecting performance.

cond-mat.mtrl-sci↗

arXiv2016

Finite element analysis of ion-implanted diamond surface swelling

We present experimental results and numerical Finite Element analysis to describe surface swelling due to the creation of buried graphite-like inclusions in diamond substrates subjected to MeV ion implantation. Numerical predictions are compared to experimental data for MeV proton and helium implantations, performed with scanning ion microbeams. Swelling values are measured with white light interferometric profilometry in both cases. Simulations are based on a model which accounts for the through-the-thickness variation of mechanical parameters in the material, as a function of ion type, fluence and energy. Surface deformation profiles and internal stress distributions are analyzed and numerical results are seen to adequately fit experimental data. Results allow us to draw conclusions on structural damage mechanisms in diamond for different MeV ion implantations.

cond-mat.mtrl-sci↗

arXiv2016

Softening the ultra-stiff: controlled variation of Young's modulus in single crystal diamond

A combined experimental and numerical study on the variation of the elastic properties of defective single-crystal diamond is presented for the first time, by comparing nano-indentation measurements on MeV-ion-implanted samples with multi-scale modeling consisting of both ab initio atomistic calculations and meso-scale Finite Element Method (FEM) simulations. It is found that by locally introducing defects in the 2x10^18 - 5x10^21 cm-3 density range, a significant reduction of, as well as of density, can be induced in the diamond crystal structure without incurring in the graphitization of the material. Ab initio atomistic simulations confirm the experimental findings with a good degree of confidence. FEM simulations are further employed to verify the consistency of measured deformations with a stiffness reduction, and to derive strain and stress levels in the implanted region. Combining these experimental and numerical results, we also provide insight into the mechanism responsible for the depth dependence of the graphitization threshold in diamond. This work prospects the possibility of achieving accurate tunability of the mechanical properties of single-crystal diamond through defect engineering, with significant technological applications, i.e. the fabrication and control of the resonant frequency of diamond-based micromechanical resonators.

cond-mat.mtrl-sci↗

arXiv2016

Modification of the structure of diamond with MeV ion implantation

We present experimental results and numerical simulations to investigate the modification of structural-mechanical properties of ion-implanted single-crystal diamond. A phenomenological model is used to derive an analytical expression for the variation of mass density and elastic properties as a function of damage density in the crystal. These relations are applied together with SRIM Monte Carlo simulations to set up Finite Element simulations for the determination of internal strains and surface deformation of MeV-ion-implanted diamond samples. The results are validated through comparison with high resolution X-ray diffraction and white-light interferometric profilometry experiments. The former are carried out on 180 keV B implanted diamond samples, to determine the induced structural variation, in terms of lattice spacing and disorder, whilst the latter are performed on 1.8 MeV He implanted diamond samples to measure surface swelling. The effect of thermal processing on the evolution of the structural-mechanical properties of damaged diamond is also evaluated by performing the same profilometric measurements after annealing at 1000 °C, and modeling the obtained trends with a suitably modified analytical model. The results allow the development of a coherent model describing the effects of MeV-ion-induced damage on the structural-mechanical properties of single-crystal diamond. In particular, we suggest a more reliable method to determine the so-called diamond "graphitization threshold" for the considered implantation type.

cond-mat.mtrl-sci↗

arXiv2016

Characterization of the recovery of mechanical properties of ion-implanted diamond after thermal annealing

Due to their outstanding mechanical properties, diamond and diamond-like materials find significant technological applications ranging from well-established industrial fields (cutting tools, coatings, etc.) to more advanced mechanical devices as micro- and nano-electromechanical systems. The use of energetic ions is a powerful and versatile tool to fabricate three-dimensional micro-mechanical structures. In this context, it is of paramount importance to have an accurate knowledge of the effects of ion-induced structural damage on the mechanical properties of this material, firstly to predict potential undesired side-effects of the ion implantation process, and possibly to tailor the desired mechanical properties of the fabricated devices. We present an Atomic Force Microscopy (AFM) characterization of free-standing cantilevers in single-crystal diamond obtained by a FIB-assisted lift-off technique, which allows a determination of the Young's modulus of the diamond crystal after the MeV ion irradiation process concurrent to the fabrication of the microstructures, and subsequent thermal annealing. The AFM measurements were performed with the beam-bending technique and show that the thermal annealing process allows for an effective recovery of the mechanical properties of the pristine crystal.

cond-mat.mtrl-sci↗

arXiv2016

Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation

This paper presents experimental data and analysis of the structural damage caused by swift-heavy ion irradiation of single-crystal diamond. The patterned buried structural damage is shown to generate, via swelling, a mirror-pattern on the sample surface, which remains largely damage-free. While extensive results are available for light ion implantations, this effect is reported here for the first time in the heavy ion regime, where a completely different range of input parameters (in terms of ion species, energy, stopping power, etc.) is available for customized irradiation. The chosen ion species are Au and Br, in the energy range 10-40 MeV. The observed patterns, as characterized by profilometry and atomic force microscopy, are reported in a series of model experiments, which show swelling patterns ranging from a few nm to above 200 nm. Moreover, a systematic phenomenological modelling is presented, in which surface swelling measurements are correlated to buried crystal damage. A comparison is made with data for light ion implantations, showing good compatibility with the proposed models. The modelling presented in this work can be useful for the design and realization of micropatterned surfaces in single crystal diamond, allowing to generate highly customized structures by combining appropriately chosen irradiation parameters and masks.

cond-mat.mtrl-sci↗