arXiv subjects

F. Cogato

Publications and source records attributed to F. Cogato.

7 recordsLinked to original sources

arXiv2026

Euclid. Properties and performance of the NISP signal estimator

The Euclid spacecraft, located at the second Lagrangian point of the Sun-Earth system, hosts the Near-Infrared Spectrometer and Photometer (NISP) instrument. NISP is equipped with a mosaic of 16 HgCdTe-based detectors to acquire near-infrared photometric and spectroscopic data. To meet the spacecraft's constraints on computational resources and telemetry bandwidth, the near-infrared signal is processed onboard via a dedicated hardware-software architecture designed to fulfil the stringent Euclid's data-quality requirements. A custom application software, running on the two NISP data processing units, implements the NISP signal estimator: an ad-hoc algorithm which delivers accurate flux measurements and simultaneously estimates the quality of signal estimation through the quality factor parameter. This paper investigates the properties of the NISP signal estimator by evaluating its performance during the early flight operations of the NISP instrument. First, we revisit the assumptions on which the inference of the near-infrared signal is based and investigate the origin of the main systematics of the signal estimator through Monte Carlo simulations. Then, we test the flight performance of the NISP signal estimator. Results indicate a systematic bias lower than 0.01 e/s for 99% of the NISP pixel array, well within the noise budget of the estimated signal. We also derive an analytical expression for the variance of the NISP signal estimator, demonstrating its validity, particularly when the covariance matrix is not pre-computed. Finally, we provide a robust statistical framework to interpret the QF parameter, analyse its dependence on the signal estimator bias, and show its sensitivity to cosmic ray hits on NISP detectors. Our findings corroborate previous results on the NISP signal estimator and suggest a leading-order correction based on the agreement between flight data and simulations.

astro-ph.IM↗

arXiv2025

Kilonova and progenitor properties of merger-driven gamma-ray bursts

Gamma-Ray Burst (GRB) prompt and afterglow emission, as well as a kilonova (KN), are the expected electromagnetic (EM) counterparts of Binary Neutron Star (BNS) and Neutron Star -- Black Hole (NSBH) mergers. We aim to infer the KN ejecta parameters and the progenitor properties by modeling merger-driven GRBs with a claim of KN, good data and robust redshift measurement. We model the afterglow and KN, and perform a Bayesian analysis, within the Nuclear physics and Multi-Messenger Astrophysics (NMMA) framework. The KN emission is modeled with the radiative transfer code POSSIS and for afterglow we use the afterglowpy library. In contrast to previous approaches, our methodology simultaneously models both afterglow and KN. We find that all GRBs in our sample have a KN, but we were unable to confirm or exclude its presence in GRB 150101B. A BNS progenitor is favored for GRB 160821B, GRB 170817A/AT2017gfo, GRB 211211A, and GRB 230307A. For GRB 150101B and GRB 191019A, we obtain a slight preference for NSBH scenario, while a BNS is also viable. For KN emission, we find that the median wind mass $\langle M_{\rm wind}\rangle=0.027^{+0.046}_{-0.019}$ $M_{\odot}$ is larger than the dynamical $\langle M_{\rm dyn}\rangle = 0.012^{+0.007}_{-0.006}$ $M_{\odot}$. We find that $M_{\rm wind}$ and the beaming corrected kinetic energy of the jet can be attributed as $log(M_{\rm wind})=-20.23+0.38\,log(E_{0,J})$. We confirm the results of numerical simulation that $\tilde\Lambda$ increases with decrease in $\mathcal{M}_{\rm \,Chirp}$. Our work shows that EM modeling can be effective for probing the progenitors, and for the first time presents the progenitor properties of a sizable sample of merger-driven GRBs.

astro-ph.HE↗

arXiv2025

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗

arXiv2025

Euclid: The potential of slitless infrared spectroscopy: A z=5.4 quasar and new ultracool dwarfs

We demonstrate the potential of Euclid's slitless spectroscopy to discover high-redshift (z>5) quasars and their main photometric contaminant, ultracool dwarfs. Sensitive infrared spectroscopy from space is able to efficiently identify both populations, as demonstrated by Euclid Near-Infrared Spectrometer and Photometer Red Grism (NISP RGE) spectra of the newly discovered z=5.404 quasar EUCL J181530.01+652054.0, as well as several ultracool dwarfs in the Euclid Deep Field North and the Euclid Early Release Observation field Abell 2764. The ultracool dwarfs were identified by cross-correlating their spectra with templates. The quasar was identified by its strong and broad CIII] and MgII emission lines in the NISP RGE 1206-1892 nm spectrum, and confirmed through optical spectroscopy from the Large Binocular Telescope. The NISP Blue Grism (NISP BGE) 926-1366 nm spectrum confirms CIV and CIII] emission. NISP RGE can find bright quasars at z~5.5 and z>7, redshift ranges that are challenging for photometric selection due to contamination from ultracool dwarfs. EUCL J181530.01+652054.0 is a high-excitation, broad absorption line quasar detected at 144 MHz by the LOw-Frequency Array (L144=4e25 W/Hz). The quasar has a bolometric luminosity of 3e12 Lsun and is powered by a 3.4e9 Msun black hole. The discovery of this bright quasar is noteworthy as fewer than one such object was expected in the ~20 deg2 surveyed. This finding highlights the potential and effectiveness of NISP spectroscopy in identifying rare, luminous high-redshift quasars, previewing the census of these sources that Euclid's slitless spectroscopy will deliver over about 14,000 deg2 of the sky.

astro-ph.GA↗

arXiv2025

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM↗

arXiv2025

Euclid Quick Data Release (Q1). NIR processing and data products

This paper describes the near-infrared processing function (NIR PF) that processes near-infrared images from the Near-Infrared Spectrometer and Photometer (NISP) instrument onboard the Euclid satellite. NIR PF consists of three main components: (i) a common pre-processing stage for both photometric (NIR) and spectroscopic (SIR) data to remove instrumental effects; (ii) astrometric and photometric calibration of NIR data, along with catalogue extraction; and (iii) resampling and stacking. The necessary calibration products are generated using dedicated pipelines that process observations from both the early performance verification (PV) phase in 2023 and the nominal survey operations. After outlining the pipeline's structure and algorithms, we demonstrate its application to Euclid Q1 images. For Q1, we achieve an astrometric accuracy of 9-15 mas, a relative photometric accuracy of 5 mmag, and an absolute flux calibration limited by the 1% uncertainty of the Hubble Space Telescope (HST) CALSPEC database. We characterise the point-spread function (PSF) that we find very stable across the focal plane, and we discuss current limitations of NIR PF that will be improved upon for future data releases.

astro-ph.CO↗

arXiv2024

Euclid. III. The NISP Instrument

The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.

astro-ph.IM↗